- 07 Feb, 2019 24 commits
-
-
Ezequiel Garcia authored
The .buf_out_validate callback is mandatory for OUTPUT queues. Mark it as such in the callback's doc. Fixes: 28d77c21 ("media: vb2: add buf_out_validate callback") Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Steve Longerbeam authored
In the .s_frame_interval() subdev op, don't accept or set a frame interval with a zero numerator or denominator. This fixes a v4l2-compliance failure: fail: v4l2-test-formats.cpp(1146): cap->timeperframe.numerator == 0 || cap->timeperframe.denominator == 0 test VIDIOC_G/S_PARM: FAIL Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
It seems that it is possible that dev to be null, as there's a warning printing: "Instance released before the end of transaction" Solves this warning: drivers/media/platform/vim2m.c: drivers/media/platform/vim2m.c:525 device_work() warn: variable dereferenced before check 'curr_ctx' (see line 523) Signed-off-by: -
André Almeida authored
To correctly set the size of the image in a plane, it's needed to divide the height of image by the vertical down sampling factor. This was only happening in vivid_try_fmt_vid_cap(), but now it applied in others sizeimage calculations as well. Signed-off-by:
André Almeida <andre.almeida@collabora.com> Signed-off-by:
-
Lucas A. M. Magalhães authored
Add a linear pipeline logic for the stream control. It's created by walking backwards on the entity graph. When the stream starts it will simply loop through the pipeline calling the respective process_frame function of each entity. Fixes: f2fe8906 ("vimc: Virtual Media Controller core, capture and sensor") Cc: stable@vger.kernel.org # for v4.20 Signed-off-by:
Lucas A. M. Magalhães <lucmaga@gmail.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Hans Verkuil authored
This function is no longer used, so drop it. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Just like vb2 does, use u64 internally to store the timestamps of the buffers. Only convert to timeval when interfacing with userspace. Signed-off-by:
-
Hans Verkuil authored
Internally use ktime_get_ns() to get the timestamp of the event. Only convert to timespec when interfacing with userspace. Signed-off-by:
-
Colin Ian King authored
The comparison css->pipes[pipe].bindex < 0 is always false because bindex is an unsigned int. Fix this by using a signed integer for the comparison. Detected by CoverityScan, CID#1476023 ("Unsigned compared against 0") Fixes: f5f2e427 ("media: staging/intel-ipu3: Add css pipeline programming") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yong Zhi authored
Since ipu3_css_buf_dequeue() never returns NULL, remove the dead code to fix static checker warning: drivers/staging/media/ipu3/ipu3.c:493 imgu_isr_threaded() warn: 'b' is an error pointer or valid Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> [Bug report: https://lore.kernel.org/linux-media/20190104122856.GA1169@kadam/] Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Yong Zhi authored
This addresses the below TODO item. - Use V4L2_CTRL_TYPE_MENU for dual-pipe mode control. (Sakari) Signed-off-by:
-
Sakari Ailus authored
The UVC video driver converts the timestamp from hardware specific unit to one known by the kernel at the time when the buffer is dequeued. This is fine in general, but the streamoff operation consists of the following steps (among other things): 1. uvc_video_clock_cleanup --- the hardware clock sample array is released and the pointer to the array is set to NULL, 2. buffers in active state are returned to the user and 3. buf_finish callback is called on buffers that are prepared. buf_finish includes calling uvc_video_clock_update that accesses the hardware clock sample array. The above is serialised by a queue specific mutex. Address the problem by skipping the clock conversion if the hardware clock sample array is already released. Fixes: 9c0863b1 ("[media] vb2: call buf_finish from __queue_cancel") Reported-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Alistair Strachan authored
When initially testing the Camera Terminal Descriptor wTerminalType field (buffer[4]), no mask is used. Later in the function, the MSB is overloaded to store the descriptor subtype, and so a mask of 0x7fff is used to check the type. If a descriptor is specially crafted to set this overloaded bit in the original wTerminalType field, the initial type check will fail (falling through, without adjusting the buffer size), but the later type checks will pass, assuming the buffer has been made suitably large, causing an overflow. Avoid this problem by checking for the MSB in the wTerminalType field. If the bit is set, assume the descriptor is bad, and abort parsing it. Originally reported here: https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8 A similar (non-compiling) patch was provided at that time. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
-
Hans Verkuil authored
The SOURCE_CHANGE event is decoder specific, so don't allow it for encoders. Signed-off-by:
-
Hans Verkuil authored
It is good practice to fill in the bus_info. Signed-off-by:
-
Hans Verkuil authored
It is good practice to fill in bus_info. Signed-off-by:
-
Hans Verkuil authored
Check that the selection buf_type is valid before calling get_q_data() to avoid hitting the WARN(1) in that function if the buffer type is not valid. Signed-off-by:
-
Philipp Zabel authored
Fix a copy&paste error to make RGB -> BT.2020 YUV conversion actually selectable. Fixes the following warning: drivers/media/platform/imx-pxp.c:683:24: warning: duplicated ‘if’ condition [-Wduplicated-cond] Fixes: 51abcf7f ("media: imx-pxp: add i.MX Pixel Pipeline driver") Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Hans Verkuil authored
Commit 2cc1802f ("media: vb2: Keep dma-buf buffers mapped until they are freed") removed code leaving a local variable unused. Remove it to avoid a compiler warning. Fixes: 2cc1802f ("media: vb2: Keep dma-buf buffers mapped until they are freed") Signed-off-by:
-
- 31 Jan, 2019 16 commits
-
-
Mauro Carvalho Chehab authored
While there's a control to allow setting it at runtime, as the control handler is per file handler, only the application setting the m2m device can change it. As this is a custom control, it is unlikely that existing apps would be able to set it. Due to that, and due to the fact that v4l2-mem2mem serializes all accesses to a m2m device, trying to setup two GStreamer v4l2videoconvert instance at the same time will cause frame drops. So, add an alternate way of setting its default via a modprobe parameter. Signed-off-by: -
Mauro Carvalho Chehab authored
It doesn't make sense to have a per-device work queue, as the scheduler should be called per file handler. Having a single one causes failures if multiple streams are filtered by vim2m. So, move it to be inside the context structure. Signed-off-by: -
Mauro Carvalho Chehab authored
Despite vim2m is reporting that it supports RGB565BE and YUYV, that's not true. Right now, it just says that it supports both format, but it doesn't actually support them. Also, horizontal flip is not properly implemented. It sounds that it was designed to do a pseudo-horizontal flip using 8 tiles. Yet, as it doesn't do format conversion, the result is a mess. I suspect that it was done this way in order to save CPU time, at the time of OMAP2 days. That's messy and doesn't really help if someone wants to use vim2m to test a pipeline. Worse than that, the unique RGB format it says it supports is RGB565BE, with is not supported by Gstreamer. That prevents practical usage of it, even for tests. So, instead, properly implement fourcc format conversions, adding a few more RGB formats: - RGB and BGR with 24 bits - RGB565LE (known as RGB16 at gstreamer) Also allows using any of the 5 supported formats as either capture or output. Note: The YUYV conversion routines are based on the conversion code written by Hans de Goede inside libv4lconvert (part of v4l-utils), released under LGPGL 2.1 (GPL 2.0 compatible). Tested all possible format combinations except for RGB565BE, as Gstreamer currently doesn't support it. Signed-off-by: -
Hans Verkuil authored
The wrong size check was performed for output formats like NV24 which set vfmt->buffers to 1, but vfmt->planes is 2. It was incorrectly checking the payload size for plane 1, which doesn't exist. Note: vfmt->buffers refers to the number of per-plane-buffers that should be allocated. vfmt->planes refers to the number of planes that make up an image. vfmt->planes may be > vfmt->buffers. Signed-off-by:
-
Hans Verkuil authored
The buf_out_validate is required for output queues in combination with requests. Check this. Signed-off-by:
-
Hans Verkuil authored
Validate the field for an output buffer. This ensures that the field is validated when the buffer is queued to a request, and not when the request itself is queued, which is too late. Signed-off-by:
-
Hans Verkuil authored
Validate the field for an output buffer. This ensures that the field is validated when the buffer is queued to a request, and not when the request itself is queued, which is too late. Signed-off-by:
-
Hans Verkuil authored
Validate the field for an output buffer. This ensures that the field is validated when the buffer is queued to a request, and not when the request itself is queued, which is too late. Signed-off-by:
-
Hans Verkuil authored
When queueing a buffer to a request the 'field' value is not validated. That field is only validated when the _buf_prepare() is called, which happens when the request is queued. However, this validation should happen at QBUF time, since you want to know about this as soon as possible. Also, the spec requires that the 'field' value is validated at QBUF time. This patch adds a new buf_out_validate callback to validate the output buffer at buf_prepare time or when QBUF queues an unprepared buffer to a request. This callback is mandatory for output queues that support requests. This issue was found by v4l2-compliance since it failed to replace V4L2_FIELD_ANY by a proper field value when testing the vivid video output in combination with requests. Signed-off-by:
-
Paul Kocialkowski authored
Access to reference frames that were imported from dma-buf was taken care of and is no longer a pending item on the driver's TODO list. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Pawel Osciak authored
When using vb2 for video decoding, dequeued capture buffers may still be accessed by the hardware: this is the case when they are used as reference frames for decoding subsequent frames. When the buffer is imported with dma-buf, it needs to be mapped before access. Until now, it was mapped when queuing and unmapped when dequeuing, which doesn't work for access as a reference frames. One way to solve this would be to map the buffer again when it is needed as a reference, but the mapping/unmapping operations can seriously impact performance. As a result, map the buffer once (when it is first needed when queued) and keep it mapped until it is freed. Reviewed-on: https://chromium-review.googlesource.com/334103 [Paul: Updated for mainline and changed commit message] Signed-off-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
-
Paul Kocialkowski authored
This reverts commit cf20ae15. The vb2_find_timestamp helper was modified to allow finding buffers regardless of their current state in the queue. This means that we no longer have to take particular care of references to the current capture buffer. Signed-off-by:
-
Hans Verkuil authored
There really is no reason why vb2_find_timestamp can't just find buffers in any state. Drop that part of the test. This also means that vb->timestamp should only be set to 0 when the driver doesn't copy timestamps. This change allows for more efficient pipelining (i.e. you can use a buffer for a reference frame even when it is queued). Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Reviewed-by:
-
Yunfei Dong authored
Vdec: Using standard CCF interface to set parent clock and clock rate in dtsi and using common interface to open/close video decoder clock. Venc: Using standard CCF interface to set parent clock in dtsi and using common interface to open/close video encoder clock. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
Qianqian Yan <qianqian.yan@mediatek.com> Signed-off-by:
-
Yunfei Dong authored
Fix MTK binding document for MT8173 dtsi changed in order to use standard CCF interface. MT8173 SoC from Mediatek. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Steve Longerbeam authored
Upstream must be stopped immediately after receiving the last EOF and before disabling the IDMA channel. This can be accomplished by moving upstream stream off to just after receiving the last EOF completion in prp_stop(). For symmetry also move upstream stream on to end of prp_start(). This fixes a complete system hard lockup on the SabreAuto when streaming from the ADV7180, by repeatedly sending a stream off immediately followed by stream on: while true; do v4l2-ctl -d1 --stream-mmap --stream-count=3; done Eventually this either causes the system lockup or EOF timeouts at all subsequent stream on, until a system reset. The lockup occurs when disabling the IDMA channel at stream off. Stopping the video data stream entering the IDMA channel before disabling the channel itself appears to be a reliable fix for the hard lockup. Fixes: f0d9c892 ("[media] media: imx: Add IC subdev drivers") Reported-by:
Gaël PORTAY <gael.portay@collabora.com> Tested-by:
-
