- 14 May, 2019 40 commits
-
-
Konstantin Khlebnikov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit e8277b3b upstream. Commit 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") depends on skipping vmstat entries with empty name introduced in 7aaf7727 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") but reverted in b29940c1 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). So skipping no longer works and /proc/vmstat has misformatted lines " 0". This patch simply shows debug counters "nr_tlb_remote_*" for UP. Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz Fixes: 58bc4c34 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Roman Gushchin <guro@fb.com> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 0fcc4c8c upstream. When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56 ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by:
Jann Horn <jannh@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Phil Auld authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 2e8e1922 ] With extremely short cfs_period_us setting on a parent task group with a large number of children the for loop in sched_cfs_period_timer() can run until the watchdog fires. There is no guarantee that the call to hrtimer_forward_now() will ever return 0. The large number of children can make do_sched_cfs_period_timer() take longer than the period. NMI watchdog: Watchdog detected hard LOCKUP on cpu 24 RIP: 0010:tg_nop+0x0/0x10 <IRQ> walk_tg_tree_from+0x29/0xb0 unthrottle_cfs_rq+0xe0/0x1a0 distribute_cfs_runtime+0xd3/0xf0 sched_cfs_period_timer+0xcb/0x160 ? sched_cfs_slack_timer+0xd0/0xd0 __hrtimer_run_queues+0xfb/0x270 hrtimer_interrupt+0x122/0x270 smp_apic_timer_interrupt+0x6a/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> To prevent this we add protection to the loop that detects when the loop has run too many times and scales the period and quota up, proportionally, so that the timer can complete before then next period expires. This preserves the relative runtime quota while preventing the hard lockup. A warning is issued reporting this state and the new values. Signed-off-by:
Phil Auld <pauld@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Anton Blanchard <anton@ozlabs.org> Cc: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190319130005.25492-1-pauld@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit a75bb4eb upstream. The clang option -Oz enables *aggressive* optimization for size, which doesn't necessarily result in smaller images, but can have negative impact on performance. Switch back to the less aggressive -Os. This reverts commit 6748cb3c. Suggested-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Felix Fietkau authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 4856bfd2 upstream. There are several scenarios in which mac80211 can call drv_wake_tx_queue after ieee80211_restart_hw has been called and has not yet completed. Driver private structs are considered uninitialized until mac80211 has uploaded the vifs, stations and keys again, so using private tx queue data during that time is not safe. The driver can also not rely on drv_reconfig_complete to figure out when it is safe to accept drv_wake_tx_queue calls again, because it is only called after all tx queues are woken again. To fix this, bail out early in drv_wake_tx_queue if local->in_reconfig is set. Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 5f843ed4 upstream. The following commit introduced a bug in one of our error paths: 819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") it missed to handle the return value of kprobe_optready() as error-value. In reality, the kprobe_optready() returns a bool result, so "true" case must be passed instead of 0. This causes some errors on kprobe boot-time selftests on ARM: [ ] Beginning kprobe tests... [ ] Probe ARM code [ ] kprobe [ ] kretprobe [ ] ARM instruction simulation [ ] Check decoding tables [ ] Run test cases [ ] FAIL: test_case_handler not run [ ] FAIL: Test andge r10, r11, r14, asr r7 [ ] FAIL: Scenario 11 ... [ ] FAIL: Scenario 7 [ ] Total instruction simulation tests=1631, pass=1433 fail=198 [ ] kprobe tests failed This can happen if an optimized probe is unregistered and next kprobe is registered on same address until the previous probe is not reclaimed. If this happens, a hidden aggregated probe may be kept in memory, and no new kprobe can probe same address. Also, in that case register_kprobe() will return "1" instead of minus error value, which can mislead caller logic. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v5.0+ Fixes: 819319fc ("kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()") Link: http://lkml.kernel.org/r/155530808559.32517.539898325433642204.stgit@devnote2Signed-off-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fabe38ab upstream. Mark ftrace mcount handler functions nokprobe since probing on these functions with kretprobe pushes return address incorrectly on kretprobe shadow stack. Reported-by:
Francis Deslauriers <francis.deslauriers@efficios.com> Tested-by:
Andrea Righi <righi.andrea@gmail.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Acked-by:
-
Masami Hiramatsu authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 3ff9c075 upstream. Verify the stack frame pointer on kretprobe trampoline handler, If the stack frame pointer does not match, it skips the wrong entry and tries to find correct one. This can happen if user puts the kretprobe on the function which can be used in the path of ftrace user-function call. Such functions should not be probed, so this adds a warning message that reports which function should be blacklisted. Tested-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ff8acf92 upstream. Commit 045afc24 ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") removed oldval's zero initialization in arch_futex_atomic_op_inuser because it is not necessary. Unfortunately, Android's arm64 GCC 4.9.4 [1] does not agree: ../kernel/futex.c: In function 'do_futex': ../kernel/futex.c:1658:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized] return oldval == cmparg; ^ In file included from ../kernel/futex.c:73:0: ../arch/arm64/include/asm/futex.h:53:6: note: 'oldval' was declared here int oldval, ret, tmp; ^ GCC fails to follow that when ret is non-zero, futex_atomic_op_inuser returns right away, avoiding the uninitialized use that it claims. Restoring the zero initialization works around this issue. [1]: https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/ Cc: stable@vger.kernel.org Fixes: 045afc24 ("arm64: futex: Fix FUTEX_WAKE_OP atomic ops with non-zero result value") Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 678cce40 upstream. The x86_64 implementation of Poly1305 produces the wrong result on some inputs because poly1305_4block_avx2() incorrectly assumes that when partially reducing the accumulator, the bits carried from limb 'd4' to limb 'h0' fit in a 32-bit integer. This is true for poly1305-generic which processes only one block at a time. However, it's not true for the AVX2 implementation, which processes 4 blocks at a time and therefore can produce intermediate limbs about 4x larger. Fix it by making the relevant calculations use 64-bit arithmetic rather than 32-bit. Note that most of the carries already used 64-bit arithmetic, but the d4 -> h0 carry was different for some reason. To be safe I also made the same change to the corresponding SSE2 code, though that only operates on 1 or 2 blocks at a time. I don't think it's really needed for poly1305_block_sse2(), but it doesn't hurt because it's already x86_64 code. It *might* be needed for poly1305_2block_sse2(), but overflows aren't easy to reproduce there. This bug was originally detected by my patches that improve testmgr to fuzz algorithms against their generic implementation. But also add a test vector which reproduces it directly (in the AVX2 case). Fixes: b1ccc8f4 ("crypto: poly1305 - Add a four block AVX2 variant for x86_64") Fixes: c70f4abe ("crypto: poly1305 - Add a SSE2 SIMD variant for x86_64") Cc: <stable@vger.kernel.org> # v4.3+ Cc: Martin Willi <martin@strongswan.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Reviewed-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 2a3f7221 upstream. There is a small race window in the card disconnection code that allows the registration of another card with the very same card id. This leads to a warning in procfs creation as caught by syzkaller. The problem is that we delete snd_cards and snd_cards_lock entries at the very beginning of the disconnection procedure. This makes the slot available to be assigned for another card object while the disconnection procedure is being processed. Then it becomes possible to issue a procfs registration with the existing file name although we check the conflict beforehand. The fix is simply to move the snd_cards and snd_cards_lock clearances at the end of the disconnection procedure. The references to these entries are merely either from the global proc files like /proc/asound/cards or from the card registration / disconnection, so it should be fine to shift at the very end. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit af4b54a2 upstream. `ni6501_alloc_usb_buffers()` is called from `ni6501_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `ni6501_detach()` will be called from the core comedi module code to clean up. `ni6501_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already beed freed, leading to a double-free error. Fix it bu removing the call to `kfree(devpriv->usb_rx_buf)` from `ni6501_alloc_usb_buffers()`, relying on `ni6501_detach()` to free the memory. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 660cf4ce upstream. If `ni6501_auto_attach()` returns an error, the core comedi module code will call `ni6501_detach()` to clean up. If `ni6501_auto_attach()` successfully allocated the comedi device private data, `ni6501_detach()` assumes that a `struct mutex mut` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `ni6501_auto_attach()` can return an error after allocating the device private data but before initializing the mutex, so this assumption is invalid. Fix it by initializing the mutex just after allocating the private data in `ni6501_auto_attach()` before any other errors can be retturned. Also move the call to `usb_set_intfdata()` just to keep the code a bit neater (either position for the call is fine). I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=cf4f2b6c24aff0a3edf6>: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? usb 1-1: string descriptor 0 read error: -71 comedi comedi0: Wrong number of endpoints ni6501 1-1:0.233: driver 'ni6501' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 585 Comm: kworker/0:3 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xfe/0x12b0 kernel/locking/mutex.c:1072 ni6501_detach+0x5b/0x110 drivers/staging/comedi/drivers/ni_usb6501.c:567 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+cf4f2b6c24aff0a3edf6@syzkaller.appspotmail.com Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 663d294b upstream. `vmk80xx_alloc_usb_buffers()` is called from `vmk80xx_auto_attach()` to allocate RX and TX buffers for USB transfers. It allocates `devpriv->usb_rx_buf` followed by `devpriv->usb_tx_buf`. If the allocation of `devpriv->usb_tx_buf` fails, it frees `devpriv->usb_rx_buf`, leaving the pointer set dangling, and returns an error. Later, `vmk80xx_detach()` will be called from the core comedi module code to clean up. `vmk80xx_detach()` also frees both `devpriv->usb_rx_buf` and `devpriv->usb_tx_buf`, but `devpriv->usb_rx_buf` may have already been freed, leading to a double-free error. Fix it by removing the call to `kfree(devpriv->usb_rx_buf)` from `vmk80xx_alloc_usb_buffers()`, relying on `vmk80xx_detach()` to free the memory. Signed-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 08b7c2f9 upstream. If `vmk80xx_auto_attach()` returns an error, the core comedi module code will call `vmk80xx_detach()` to clean up. If `vmk80xx_auto_attach()` successfully allocated the comedi device private data, `vmk80xx_detach()` assumes that a `struct semaphore limit_sem` contained in the private data has been initialized and uses it. Unfortunately, there are a couple of places where `vmk80xx_auto_attach()` can return an error after allocating the device private data but before initializing the semaphore, so this assumption is invalid. Fix it by initializing the semaphore just after allocating the private data in `vmk80xx_auto_attach()` before any other errors can be returned. I believe this was the cause of the following syzbot crash report <https://syzkaller.appspot.com/bug?extid=54c2f58f15fe6876b6ad>: usb 1-1: config 0 has no interface number 0 usb 1-1: New USB device found, idVendor=10cf, idProduct=8068, bcdDevice=e6.8d usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: config 0 descriptor?? vmk80xx 1-1:0.117: driver 'vmk80xx' failed to auto-configure device. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.1.0-rc4-319354-g9a33b36 #3 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xe8/0x16e lib/dump_stack.c:113 assign_lock_key kernel/locking/lockdep.c:786 [inline] register_lock_class+0x11b8/0x1250 kernel/locking/lockdep.c:1095 __lock_acquire+0xfb/0x37c0 kernel/locking/lockdep.c:3582 lock_acquire+0x10d/0x2f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x44/0x60 kernel/locking/spinlock.c:152 down+0x12/0x80 kernel/locking/semaphore.c:58 vmk80xx_detach+0x59/0x100 drivers/staging/comedi/drivers/vmk80xx.c:829 comedi_device_detach+0xed/0x800 drivers/staging/comedi/drivers.c:204 comedi_device_cleanup.part.0+0x68/0x140 drivers/staging/comedi/comedi_fops.c:156 comedi_device_cleanup drivers/staging/comedi/comedi_fops.c:187 [inline] comedi_free_board_dev.part.0+0x16/0x90 drivers/staging/comedi/comedi_fops.c:190 comedi_free_board_dev drivers/staging/comedi/comedi_fops.c:189 [inline] comedi_release_hardware_device+0x111/0x140 drivers/staging/comedi/comedi_fops.c:2880 comedi_auto_config.cold+0x124/0x1b0 drivers/staging/comedi/drivers.c:1068 usb_probe_interface+0x31d/0x820 drivers/usb/core/driver.c:361 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_set_configuration+0xdf7/0x1740 drivers/usb/core/message.c:2021 generic_probe+0xa2/0xda drivers/usb/core/generic.c:210 usb_probe_device+0xc0/0x150 drivers/usb/core/driver.c:266 really_probe+0x2da/0xb10 drivers/base/dd.c:509 driver_probe_device+0x21d/0x350 drivers/base/dd.c:671 __device_attach_driver+0x1d8/0x290 drivers/base/dd.c:778 bus_for_each_drv+0x163/0x1e0 drivers/base/bus.c:454 __device_attach+0x223/0x3a0 drivers/base/dd.c:844 bus_probe_device+0x1f1/0x2a0 drivers/base/bus.c:514 device_add+0xad2/0x16e0 drivers/base/core.c:2106 usb_new_device.cold+0x537/0xccf drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x138e/0x3b00 drivers/usb/core/hub.c:5432 process_one_work+0x90f/0x1580 kernel/workqueue.c:2269 worker_thread+0x9b/0xe20 kernel/workqueue.c:2415 kthread+0x313/0x420 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Reported-by: syzbot+54c2f58f15fe6876b6ad@syzkaller.appspotmail.com Signed-off-by:
-
he, bo authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fe2d3df6 upstream. On some laptops, kxcjk1013 is powered off when system enters S3. We need restore the range regiter during resume. Otherwise, the sensor doesn't work properly after S3. Signed-off-by:
he, bo <bo.he@intel.com> Signed-off-by:
Chen, Hu <hu1.chen@intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Georg Ottinger authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 09c6bdee upstream. Having a brief look at at91_adc_read_raw() it is obvious that in the case of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is omitted. If 2 different channels are queried we can end up with a situation where two interrupts are enabled, but only one interrupt is cleared in the interrupt handler. Resulting in a interrupt loop and a system hang. Signed-off-by:
Georg Ottinger <g.ottinger@abatec.at> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Dragos Bogdan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit fccfb9ce upstream. The desired channel has to be selected in order to correctly fill the buffer with the corresponding data. The `ad_sd_write_reg()` already does this, but for the `ad_sd_read_reg_raw()` this was omitted. Fixes: af300848 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by:
Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Mike Looijmans authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 40a7198a upstream. Standard unit for temperature is millidegrees Celcius, whereas this driver was reporting in degrees. Fix the scale factor in the driver. Signed-off-by:
Mike Looijmans <mike.looijmans@topic.nl> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Sean Christopherson authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 8f4dc2e7 upstream. Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jarkko Sakkinen authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 442601e8 upstream Return -E2BIG when the transfer is incomplete. The upper layer does not retry, so not doing that is incorrect behaviour. Cc: stable@vger.kernel.org Fixes: a2871c62 ("tpm: Add support for Atmel I2C TPMs") Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by:
Stefan Berger <stefanb@linux.ibm.com> Reviewed-by:
Jerry Snitselaar <jsnitsel@redhat.com> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit f880eea6 upstream. Use specific prototype instead of an opaque pointer so that the compiler can catch function prototype mismatch. Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ec91e78d upstream. Commit e49ce141 ("modpost: use linker section to generate table.") was not so cool as we had expected first; it ended up with ugly section hacks when commit dd2a3aca ("mod/file2alias: make modpost compile on darwin again") came in. Given a certain degree of unknowledge about the link stage of host programs, I really want to see simple, stupid table lookup so that this works in the same way regardless of the underlying executable format. Signed-off-by:
-
Christian Lamparter authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit fc340115 ] This patch fixes cts(cbc(aes)) test when cbc-aes-ppc4xx is used. alg: skcipher: Test 1 failed (invalid result) on encryption for cts(cbc-aes-ppc4xx) 00000000: 4b 10 75 fc 2f 14 1b 6a 27 35 37 33 d1 b7 70 05 00000010: 97 alg: skcipher: Failed to load transform for cts(cbc(aes)): -2 The CTS cipher mode expect the IV (req->iv) of skcipher_request to contain the last ciphertext block after the {en,de}crypt operation is complete. Fix this issue for the AMCC Crypto4xx hardware engine. The tcrypt test case for cts(cbc(aes)) is now correctly passed. name : cts(cbc(aes)) driver : cts(cbc-aes-ppc4xx) module : cts priority : 300 refcnt : 1 selftest : passed internal : no type : skcipher async : yes blocksize : 16 min keysize : 16 max keysize : 32 ivsize : 16 chunksize : 16 walksize : 16 Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit c543cb4a ] fib_compute_spec_dst() needs to be called under rcu protection. syzbot reported : WARNING: suspicious RCU usage 5.1.0-rc4+ #165 Not tainted include/linux/inetdevice.h:220 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by swapper/0/0: #0: 0000000051b67925 ((&n->timer)){+.-.}, at: lockdep_copy_map include/linux/lockdep.h:170 [inline] #0: 0000000051b67925 ((&n->timer)){+.-.}, at: call_timer_fn+0xda/0x720 kernel/time/timer.c:1315 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-rc4+ #165 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 lockdep_rcu_suspicious+0x153/0x15d kernel/locking/lockdep.c:5162 __in_dev_get_rcu include/linux/inetdevice.h:220 [inline] fib_compute_spec_dst+0xbbd/0x1030 net/ipv4/fib_frontend.c:294 spec_dst_fill net/ipv4/ip_options.c:245 [inline] __ip_options_compile+0x15a7/0x1a10 net/ipv4/ip_options.c:343 ipv4_link_failure+0x172/0x400 net/ipv4/route.c:1195 dst_link_failure include/net/dst.h:427 [inline] arp_error_report+0xd1/0x1c0 net/ipv4/arp.c:297 neigh_invalidate+0x24b/0x570 net/core/neighbour.c:995 neigh_timer_handler+0xc35/0xf30 net/core/neighbour.c:1081 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 Fixes: ed0de45a ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stephen Suryaputra authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit ed0de45a ] Recompile IP options since IPCB may not be valid anymore when ipv4_link_failure is called from arp_error_report. Refer to the commit 3da1ed7a ("net: avoid use IPCB in cipso_v4_error") and the commit before that (9ef6b42a) for a similar issue. Signed-off-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 50ce163a ] For some reason, tcp_grow_window() correctly tests if enough room is present before attempting to increase tp->rcv_ssthresh, but does not prevent it to grow past tcp_space() This is causing hard to debug issues, like failing the (__tcp_select_window(sk) >= tp->rcv_wnd) test in __tcp_ack_snd_check(), causing ACK delays and possibly slow flows. Depending on tcp_rmem[2], MTU, skb->len/skb->truesize ratio, we can see the problem happening on "netperf -t TCP_RR -- -r 2000,2000" after about 60 round trips, when the active side no longer sends immediate acks. This bug predates git history. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 988dc4a9 ] gue tunnels run iptunnel_pull_offloads on received skbs. This can determine a possible use-after-free accessing guehdr pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Nikolay Aleksandrov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit c5b493ce ] br_multicast_start_querier() walks over the port list but it can be called from a timer with only multicast_lock held which doesn't protect the port list, so use RCU to walk over it. Fixes: c83b8fab ("bridge: Restart queries when last querier expires") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Gustavo A. R. Silva authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 899537b7 ] arg is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: net/atm/lec.c:715 lec_mcast_attach() warn: potential spectre issue 'dev_lec' [r] (local cap) Fix this by sanitizing arg before using it to index dev_lec. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Sabrina Dubroca authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 92480b39 ] When a bond is enslaved to another bond, bond_netdev_event() only handles the event as if the bond is a master, and skips treating the bond as a slave. This leads to a refcount leak on the slave, since we don't remove the adjacency to its master and the master holds a reference on the slave. Reproducer: ip link add bondL type bond ip link add bondU type bond ip link set bondL master bondU ip link del bondL No "Fixes:" tag, this code is older than git history. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 27da0d2e ] A bugfix just broke compilation of appletalk when CONFIG_SYSCTL is disabled: In file included from net/appletalk/ddp.c:65: net/appletalk/ddp.c: In function 'atalk_init': include/linux/atalk.h:164:34: error: expected expression before 'do' #define atalk_register_sysctl() do { } while(0) ^~ net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl' rc = atalk_register_sysctl(); This is easier to avoid by using conventional inline functions as stubs rather than macros. The header already has inline functions for other purposes, so I'm changing over all the macros for consistency. Fixes: 6377f787 ("appletalk: Fix use-after-free in atalk_proc_exit") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Miklos Szeredi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d0e13f5b ] Fix a regression when creating a file over a whiteout. The new file/directory needs to use the current fsuid/fsgid, not the ones from the mounter's credentials. The refcounting is a bit tricky: prepare_creds() sets an original refcount, override_creds() gets one more, which revert_cred() drops. So 1) we need to expicitly put the mounter's credentials when overriding with the updated one 2) we need to put the original ref to the updated creds (and this can safely be done before revert_creds(), since we'll still have the ref from override_creds()). Reported-by:
Stephen Smalley <sds@tycho.nsa.gov> Fixes: 3fe6e52f ("ovl: override creds with the ones from the superblock mounter") Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Jarkko Sakkinen authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 3d7a850f upstream The current approach to read first 6 bytes from the response and then tail of the response, can cause the 2nd memcpy_fromio() to do an unaligned read (e.g. read 32-bit word from address aligned to a 16-bits), depending on how memcpy_fromio() is implemented. If this happens, the read will fail and the memory controller will fill the read with 1's. This was triggered by 170d13ca, which should be probably refined to check and react to the address alignment. Before that commit, on x86 memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right thing (from tpm_crb's perspective) for us so far, but we should not rely on that. Thus, it makes sense to fix this also in tpm_crb, not least because the fix can be then backported to stable kernels and make them more robust when compiled in differing environments. Cc: stable@vger.kernel.org Cc: James Morris <jmorris@namei.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jerry Snitselaar <jsnitsel@redhat.com> Fixes: 30fc8d13 ("tpm: TPM 2.0 CRB Interface") Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Pi-Hsun Shih authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit a4046c06 ] Use offsetof() to calculate offset of a field to take advantage of compiler built-in version when possible, and avoid UBSAN warning when compiling with Clang: UBSAN: Undefined behaviour in mm/swapfile.c:3010:38 member access within null pointer of type 'union swap_header' CPU: 6 PID: 1833 Comm: swapon Tainted: G S 4.19.23 #43 Call trace: dump_backtrace+0x0/0x194 show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0x70/0x94 ubsan_epilogue+0x14/0x44 ubsan_type_mismatch_common+0xf4/0xfc __ubsan_handle_type_mismatch_v1+0x34/0x54 __se_sys_swapon+0x654/0x1084 __arm64_sys_swapon+0x1c/0x24 el0_svc_common+0xa8/0x150 el0_svc_compat_handler+0x2c/0x38 el0_svc_compat+0x8/0x18 Link: http://lkml.kernel.org/r/20190312081902.223764-1-pihsun@chromium.orgSigned-off-by:
Pi-Hsun Shih <pihsun@chromium.org> Acked-by:
-
Stanislaw Gruszka authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit cdc94a37 ] fls counts bits starting from 1 to 32 (returns 0 for zero argument). If we add 1 we shift right one bit more and loose precision from divisor, what cause function incorect results with some numbers. Corrected code was tested in user-space, see bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202391 Link: http://lkml.kernel.org/r/1548686944-11891-1-git-send-email-sgruszka@redhat.com Fixes: 658716d1 ("div64_u64(): improve precision on 32bit platforms") Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Reported-by:
Siarhei Volkau <lis8215@gmail.com> Tested-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 6377f787 ] KASAN report this: BUG: KASAN: use-after-free in pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 Read of size 8 at addr ffff8881f41fe5b0 by task syz-executor.0/2806 CPU: 0 PID: 2806 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 pde_subdir_find+0x12d/0x150 fs/proc/generic.c:71 remove_proc_entry+0xe8/0x420 fs/proc/generic.c:667 atalk_proc_exit+0x18/0x820 [appletalk] atalk_exit+0xf/0x5a [appletalk] __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x3dc/0x5e0 kernel/module.c:961 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb2de6b9c58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200001c0 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb2de6ba6bc R13: 00000000004bccaa R14: 00000000006f6bc8 R15: 00000000ffffffff Allocated by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 slab_post_alloc_hook mm/slab.h:444 [inline] slab_alloc_node mm/slub.c:2739 [inline] slab_alloc mm/slub.c:2747 [inline] kmem_cache_alloc+0xcf/0x250 mm/slub.c:2752 kmem_cache_zalloc include/linux/slab.h:730 [inline] __proc_create+0x30f/0xa20 fs/proc/generic.c:408 proc_mkdir_data+0x47/0x190 fs/proc/generic.c:469 0xffffffffc10c01bb 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 2806: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kmem_cache_free+0xa6/0x2a0 mm/slub.c:3002 pde_put+0x6e/0x80 fs/proc/generic.c:647 remove_proc_entry+0x1d3/0x420 fs/proc/generic.c:684 0xffffffffc10c031c 0xffffffffc10c0166 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881f41fe500 which belongs to the cache proc_dir_entry of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff8881f41fe500, ffff8881f41fe600) The buggy address belongs to the page: page:ffffea0007d07f80 count:1 mapcount:0 mapping:ffff8881f6e69a00 index:0x0 flags: 0x2fffc0000000200(slab) raw: 02fffc0000000200 dead000000000100 dead000000000200 ffff8881f6e69a00 raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881f41fe480: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8881f41fe500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881f41fe580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881f41fe600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8881f41fe680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb It should check the return value of atalk_proc_init fails, otherwise atalk_exit will trgger use-after-free in pde_subdir_find while unload the module.This patch fix error cleanup path of atalk_init Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Yang Shi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 143c2a89 ] When running kprobe on -rt kernel, the below bug is caught: |BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 |in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0 |Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140 |CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1 |Hardware name: Freescale LS1021A |[<8025a43c>] (___might_sleep) |[<80b5b324>] (rt_spin_lock) |[<80b5c31c>] (__patch_text_real) |[<80b5c3ac>] (patch_text_stop_machine) |[<802f2920>] (multi_cpu_stop) Since patch_text_stop_machine() is called in stop_machine() which disables IRQ, sleepable lock should be not used in this atomic context, so replace patch_lock to raw lock. Signed-off-by:
Yang Shi <yang.shi@linaro.org> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Julia Cartwright authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit cffaaf0c ] Commit 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") changed the type of the path data, however, the change in path type was not reflected in size calculations. Update to use the correct type and prevent a buffer overflow. This bug manifests in systems with deep PCI hierarchies, and can lead to an overflow of the static allocated buffer (dmar_pci_notify_info_buf), or can lead to overflow of slab-allocated data. BUG: KASAN: global-out-of-bounds in dmar_alloc_pci_notify_info+0x1d5/0x2e0 Write of size 1 at addr ffffffff90445d80 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.14.87-rt49-02406-gd0a0e96 #1 Call Trace: ? dump_stack+0x46/0x59 ? print_address_description+0x1df/0x290 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? kasan_report+0x256/0x340 ? dmar_alloc_pci_notify_info+0x1d5/0x2e0 ? e820__memblock_setup+0xb0/0xb0 ? dmar_dev_scope_init+0x424/0x48f ? __down_write_common+0x1ec/0x230 ? dmar_dev_scope_init+0x48f/0x48f ? dmar_free_unused_resources+0x109/0x109 ? cpumask_next+0x16/0x20 ? __kmem_cache_create+0x392/0x430 ? kmem_cache_create+0x135/0x2f0 ? e820__memblock_setup+0xb0/0xb0 ? intel_iommu_init+0x170/0x1848 ? _raw_spin_unlock_irqrestore+0x32/0x60 ? migrate_enable+0x27a/0x5b0 ? sched_setattr+0x20/0x20 ? migrate_disable+0x1fc/0x380 ? task_rq_lock+0x170/0x170 ? try_to_run_init_process+0x40/0x40 ? locks_remove_file+0x85/0x2f0 ? dev_prepare_static_identity_mapping+0x78/0x78 ? rt_spin_unlock+0x39/0x50 ? lockref_put_or_lock+0x2a/0x40 ? dput+0x128/0x2f0 ? __rcu_read_unlock+0x66/0x80 ? __fput+0x250/0x300 ? __rcu_read_lock+0x1b/0x30 ? mntput_no_expire+0x38/0x290 ? e820__memblock_setup+0xb0/0xb0 ? pci_iommu_init+0x25/0x63 ? pci_iommu_init+0x25/0x63 ? do_one_initcall+0x7e/0x1c0 ? initcall_blacklisted+0x120/0x120 ? kernel_init_freeable+0x27b/0x307 ? rest_init+0xd0/0xd0 ? kernel_init+0xf/0x120 ? rest_init+0xd0/0xd0 ? ret_from_fork+0x1f/0x40 The buggy address belongs to the variable: dmar_pci_notify_info_buf+0x40/0x60 Fixes: 57384592 ("iommu/vt-d: Store bus information in RMRR PCI device path") Signed-off-by:
Julia Cartwright <julia@ni.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Ard Biesheuvel authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit c6431650 ] The SHA512 code we adopted from the OpenSSL project uses a rather peculiar way to take the address of the round constant table: it takes the address of the sha256_block_data_order() routine, and substracts a constant known quantity to arrive at the base of the table, which is emitted by the same assembler code right before the routine's entry point. However, recent versions of binutils have helpfully changed the behavior of references emitted via an ADR instruction when running in Thumb2 mode: it now takes the Thumb execution mode bit into account, which is bit 0 af the address. This means the produced table address also has bit 0 set, and so we end up with an address value pointing 1 byte past the start of the table, which results in crashes such as Unable to handle kernel paging request at virtual address bf825000 pgd = 42f44b11 [bf825000] *pgd=80000040206003, *pmd=5f1bd003, *pte=00000000 Internal error: Oops: 207 [#1] PREEMPT SMP THUMB2 Modules linked in: sha256_arm(+) sha1_arm_ce sha1_arm ... CPU: 7 PID: 396 Comm: cryptomgr_test Not tainted 5.0.0-rc6+ #144 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 PC is at sha256_block_data_order+0xaaa/0xb30 [sha256_arm] LR is at __this_module+0x17fd/0xffffe800 [sha256_arm] pc : [<bf820bca>] lr : [<bf824ffd>] psr: 800b0033 sp : ebc8bbe8 ip : faaabe1c fp : 2fdd3433 r10: 4c5f1692 r9 : e43037df r8 : b04b0a5a r7 : c369d722 r6 : 39c3693e r5 : 7a013189 r4 : 1580d26b r3 : 8762a9b0 r2 : eea9c2cd r1 : 3e9ab536 r0 : 1dea4ae7 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA Thumb Segment user Control: 70c5383d Table: 6b8467c0 DAC: dbadc0de Process cryptomgr_test (pid: 396, stack limit = 0x69e1fe23) Stack: (0xebc8bbe8 to 0xebc8c000) ... unwind: Unknown symbol address bf820bca unwind: Index not found bf820bca Code: 441a ea80 40f9 440a (f85e) 3b04 ---[ end trace e560cce92700ef8a ]--- Given that this affects older kernels as well, in case they are built with a recent toolchain, apply a minimal backportable fix, which is to emit another non-code label at the start of the routine, and reference that instead. (This is similar to the current upstream state of this file in OpenSSL) Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
