The enable field needs to be kept in sync with the mode_blob field. Call
drm_atomic_set_mode_prop_for_crtc() instead of setting enable to false
in order to dereference the mode blob correctly.

v2:
- Check the return value of drm_atomic_set_mode_prop_for_crtc()
- Drop the num_connectors local variable
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

gem_prime_map is not currently described in the DRM manual, lets document
it.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

As the clflush operates on cache lines, and we can flush any byte
address, in order to flush all bytes given in the range we issue an
extra clflush on the last byte to ensure the last cacheline is flushed.
We can can the iteration to be over the actual cache lines to avoid this
double clflush on the last byte.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

We use the same check already in the atomic core, so might as well
make this official. And it's also reused in e.g. i915.

Motivated by Maarten's idea to extract a connector_changed state out
of mode_changed.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-By: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Fix warnings related to size_t when building for 64-bit architectures:

drivers/gpu/drm/drm_gem_cma_helper.c: In function ‘drm_gem_cma_create’:
drivers/gpu/drm/drm_gem_cma_helper.c:114:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 3 has type ‘size_t’ [-Wformat=]
    size);
    ^
drivers/gpu/drm/drm_gem_cma_helper.c: In function ‘drm_gem_cma_describe’:
drivers/gpu/drm/drm_gem_cma_helper.c:393:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 8 has type ‘size_t’ [-Wformat=]
    off, &cma_obj->paddr, cma_obj->vaddr, obj->size);
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Moving rotation property to "Drm" and removing from i915 and omap.
Also, adding description to the property

Cc: DRI Development <dri-devel@lists.freedesktop.org>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Sonika Jindal <sonika.jindal@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Main pull req for 4.2.. I think there will be a secondary pull-req..
I'd like to land the hdcp support patches, since all the review
comments have been long since addressed, and they have been ready to
merge for a couple release cycles now other than the scm dependency
(which should be coming in through arm-soc tree for 4.2). So I am not
including them in this initial pull req to avoid merge ordering
issues.

Main highlights:

1) adreno a306 support (for apq8x16 and upcoming dragonboard 410c)
2) various dsi bits
3) various 64bit fixes (mostly warnings)
4) NV12MT support, pulled in via msm-next rather than drm-misc since
dependency on on regenerated envytools headers (but lgtm'd-by danvet)
5) random fixes and cleanups

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (36 commits)
  drm/msm: restart queued submits after hang
  drm/msm: fix timeout calculation
  drm/msm/hdmi: Use pinctrl in HDMI driver
  drm/msm/hdmi: Point to the right struct device
  drm/msm/mdp: Add support for more 32-bit RGB formats
  drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi
  drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()
  drm/msm/mdp5: Always generate active-high sync signals for DSI
  drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n
  drm/msm: use devm_gpiod_get_optional for optional reset gpio
  drm/msm/dsi: Separate PHY to another platform device
  drm/msm/dsi: Enable PLL driver in MSM DSI
  drm/msm/dsi: Add DSI PLL clock driver support
  drm/msm: use IS_ERR() to check regulator_get() return
  drm/msm: use IS_ERR() to check msm_ioremap() return
  drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit
  drm/msm: Use customized function to wait for atomic commit done
  dt-bindings: Add MSM eDP controller documentation
  dt-bindings: Add MSM DSI controller documentation
  drm/msm: drop redundant debug output
  ...

Merge tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel into drm-next

firmware name fix

* tag 'drm-intel-next-fixes-2015-06-11' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/skl: Fix DMC API version in firmware file name

Merge tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- Make the reset wavefronts action be per process per device instead of
  per process, because one device can be stuck but the other one won't be

- Add some missing properties to the CZ device_info structure

- Rename symbols to not have CONFIG_ prefix

- Some more cleanups and debug prints

* tag 'drm-amdkfd-next-fixes-2015-06-10' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: remove not used defines from cik_regs.h
  drm/amdkfd: Add missing properties to CZ device info
  drm/amdkfd: make reset wavefronts per process per device
  drm/amdkfd: add debug print to kfd_events.c
  drm/amdkfd: avoid CONFIG_ prefix for non-Kconfig symbols

Merge branch '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel into drm-next

Mainly it is fixing timing on HDMI to be compliant with CEA-861E spec.

* '2015-06-08-st-drm-next' of http://git.linaro.org/people/benjamin.gaignard/kernel:
  drm/sti: vtg fix CEA-861E video format timing error
  drm/sti: hdmi fix CEA-861E video format timing error
  drm/sti: VTG interrupt names are badly displayed
  drm/sti: missing first pixel column on HDMI display
  drm/sti: correctly test devm_ioremap() return

Track the list of in-flight submits.  If the gpu hangs, retire up to an
including the offending submit, and then re-submit the remainder.  This
way, for concurrently running piglit tests (for example), one failing
test doesn't cause unrelated tests to fail simply because it's submit
was queued up after one that triggered a hang.
Signed-off-by: Rob Clark <robdclark@gmail.com>

The 'timeout' value comes from userspace (CLOCK_MONOTONIC), but
converting this directly to jiffies doesn't take into account the
initial jiffies count at boot, which may differ from the base time
of CLOCK_MONOTONIC.

TODO: add ktime_delta_jiffies() when rebasing on 4.1 and use that
instead of ktime_sub/ktime_to_timespec/timespec_to_jiffies combo (as
suggested by Arnd)

v2: switch over from 'struct timespec' to ktime_t throughout, since
'struct timespec' will be deprecated (as suggested by Arnd)
v3: minor cosmetic tweaks

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Some targets (eg: msm8994) use the pinctrl framework to configure
interface pins. This change adds support for initialization and
pinctrl active/sleep state control for the HDMI driver.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

DRM device's dev (hdmi->dev->dev) points to the mdss_mdp device
handle. Instead, we should get a reference to the mdss_hdmi
handle.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

That will complete the lists of Alpha + RGB formats.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Fixes userspace compilation errors like:

error: unknown type name ‘uint32_t’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Rob Clark <robdclark@gmail.com>

When the .atomic_commit() handler fails, clean up planes previoulsy
prepared by drm_atomic_helper_prepare_planes() with a call to
drm_atomic_helper_cleanup_planes().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

DSI video mode engine can only take active-high sync signals. This
change prevents MDP5 sending active-low sync signals to DSI in any
case.
Signed-off-by: Hai Li <hali@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

I'm not sure where, exactly, but somewhere in here we must be relying on
an implicit include.

drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘dsi_host_init_panel_gpios’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
  ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:25: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
                         ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1364:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_output(msm_host->disp_en_gpio, 0);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1371:20: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te");
                    ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1378:3: error: implicit declaration of function ‘gpiod_direction_input’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_input(msm_host->te_gpio);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘msm_dsi_host_power_on’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1918:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration]
   gpiod_set_value(msm_host->disp_en_gpio, 1);
   ^
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Clark <robdclark@gmail.com>

Since 39b2bbe3 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Also there is a variant to find optional gpios that returns NULL if
there is no gpio instead of -ENOENT.

Make use of both features to simplify the driver.

This makes error checking more strict because errors like -ENOSYS ("no
gpio support compiled in") or -EPROBE_DEFER ("gpio not ready yet") are
handled correctly now.

Furthermore this is one caller less that stops us making the flags
argument to gpiod_get*() mandatory.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>

There are different types of PHY from one chipset to another, while
the DSI host controller is relatively consistent across platforms.
Also, the PLL inside PHY is providing the source of DSI byte and
pixel clocks, which are used by DSI host controller. Separated devices
for clock provider and clock consumer make DSI driver better fit into
common clock framework.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

This change activates PLL driver for DSI to work with
common clock framework.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

DSI byte clock and pixel clocks are sourced from DSI PLL.
This change adds the DSI PLL source clock driver under
common clock framework.

This change handles DSI 28nm PLL only.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

regulator_get() never returns NULL. There's no need for IS_ERR_OR_NULL()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>

msm_ioremap() never returns NULL. There's no need for IS_ERR_OR_NULL()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>

CRTCs in DSI command mode data path should wait for pingpong done,
instead of vblank, to finish atomic commit.

This change is to enable PP_DONE irq on command mode CRTCs and wait for
this irq happens before atomic commit completion.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

MDP FLUSH registers could indicate if the previous flush updates
has taken effect at vsync boundary. Making use of this H/W feature
can catch the vsync that happened between CRTC atomic_flush and
*_wait_for_vblanks, to avoid unnecessary wait.

This change allows kms CRTCs to use their own *_wait_for_commit_done
functions to wait for FLUSH register cleared at vsync, before commit
completion.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns 0 in case of timeout and never
return < 0 so there is no additional information in printing the
value of time_left here as it will always be 0, thus it can be dropped.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns >= 0 but never
negative  - so the error check should be against equality
to 0 not <= 0.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

return type of wait_for_completion_timeout is unsigned long not int, this
patch assigns the return value of wait_for_completion_timeout to an
appropriately typed and named variable.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Some DSI peripherals rely on the HS clock on DSI clock lane as their clock
source. If the clock lane transitions between HS and LP states, it
can disrupt the functioning of such peripherals.

The mipi dsi mode flag MIPI_DSI_CLOCK_NON_CONTINUOUS already exists for
such peripheral drivers. Use it to configure the bit CLKLN_HS_FORCE_REQUEST
in DSI_LANE_CTRL.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

If the GEM object is imported, drm_prime_gem_destroy needs to be
called to clean up dma buffer related information.
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Fix build warning when building edp/edp_aux.o due to missing
prototype for edp_aux_transfer.

This function is only used in edp_aux.c so just make it static.
Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

wait_for_completion_timeout returns 0 in case of timeout so printing the
return value here will always yield 0 and is therefor redundant - dropped.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

The timeout is passed as a constant which makes it HZ dependent because
jiffies are expected so it should be converted to jiffies. The actual
value is not clear from the code - my best guess is that this should be
300 milliseconds given that other timeouts are in milliseconds based on
looking at other drm drivers (e.g. exynos_drm_dsi.c:356 300ms,
tegra/dpaux.c:188 250ms) - this needs to be confirmed by someone who
knows the details of the driver.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

wait_for_completion_timeout return >= 0 but never negative so the check
logic looks inconsistent. Further the return value of
wait_for_completion_timeout was being passed up the call chain but the
x call sites as drm_dp_i2c_do_msg()/drm_dp_dpcd_access() check for < 0
thus timeout was being treated as success case.

<snip> drivers/gpu/drm/drm_dp_helper.c:drm_dp_i2c_do_msg()
                mutex_lock(&aux->hw_mutex);
                ret = aux->transfer(aux, msg);
                mutex_unlock(&aux->hw_mutex);
                if (ret < 0) {
<snip>
logic in edp_aux_transfer() seems incorrect as it could return 0 (timeout)
but checks of <= 0 to indicate error so the return probably should be
-ETIMEDOUT in case wait_for_completion_timeout returns 0 (timeout
occurred).
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Seems like disable can race with complete_flip() in process of disabling
a crtc, leading to:

[   49.065364] Call trace:
[   49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0
[   49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8
[   49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220
[   49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38
[   49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8
[   49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398
[   49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70
[   49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0
[   49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8
[   49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128
[   49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100
[   49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0
[   49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0
[   49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0

It makes no sense to free the ctl without disabling all stages, so lets
just move them together to avoid the crash.
Signed-off-by: Rob Clark <robdclark@gmail.com>

Signed-off-by: Rob Clark <robdclark@gmail.com>