Merge tag 'uniphier-dt64-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64

UniPhier ARM64 SoC DT updates for v4.14 (2nd)

- add reset controller node of analog amplifier
- add AIDET irqchip device nodes
- fix size of sdctrl node
- support new SoC PXs3 and its reference development board

* tag 'uniphier-dt64-v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add PXs3 SoC support
  arm64: dts: uniphier: fix size of sdctrl node
  arm64: dts: uniphier: add AIDET nodes
  arm64: dts: uniphier: add reset controller node of analog amplifier
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic 64-bit DT updates for v4.14, round 2
- clock updates w/dependencies on clock tree
- GPIO names updates

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names
  ARM64: dts: meson-gx: Add AO CEC nodes
  ARM64: dts: meson-gx: update AO clkc to new bindings
  dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock
  clk: meson: gxbb: Add sd_emmc clk0 clkids
  clk: meson-gxbb: expose almost every clock in the bindings
  clk: meson8b: expose every clock in the bindings
  clk: meson: gxbb: fix protection against undefined clks
  clk: meson: meson8b: fix protection against undefined clks
  dt-bindings: clock: meson8b: describe the embedded reset controller
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 4.14 (part 3)

Add description for a new family SoC from Marvell: Armada-8KP.

* tag 'mvebu-dt64-4.14-3' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: add Device Tree files for Armada-8KP
Signed-off-by: Olof Johansson <olof@lixom.net>

Initial support for PXs3 SoC and its reference development board.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

All registers are located within 0x400 size from the base address.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Add UniPhier AIDET (ARM Interrupt Detector) nodes to support
active low interrupts.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This patch adds reset controller node of analog signal amplifier
core (ADAMV) for UniPhier LD11/LD20 SoCs.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64

Pull "second round of Rockchip dts64 changes for 4.14" from Heiko Stübner:

3 new boards, the rk3328-based Rock64 from the Pine64-makers, the
Sapphire som+baseboard which is another evaluation board for Rocckhip
customers and the rk3399-based som+baseboard from Austria-based
Theobroma Systems, which interestingly is in a miniITX formfactor
and provides a real PCIe x4 slot.

New nodes include on rk3399 graphics (vops, hdmi, etc) and more iommus,
on rk3328 iommus, pwm, thermal management, and sound as well as operating
points and rk3368 got iommu nodes and cpu operating points.

On existing boards firefly got operating points, the rk3328-evb got its
pmic and gru boards got some sound-related fixes.

* tag 'v4.14-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
  arm64: dts: rockchip: add Haikou baseboard with RK3399-Q7 SoM
  arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
  dt-bindings: add rk3399-q7 SoM
  arm64: dts: rockchip: add rk3328-rock64 board
  arm64: dts: rockchip: add rk3328 pdm node
  arm64: dts: rockchip: add more rk3399 iommu nodes
  arm64: dts: rockchip: add rk3368 iommu nodes
  arm64: dts: rockchip: add rk3328 iommu nodes
  arm64: dts: rockchip: Add basic cpu frequencies for RK3368
  arm64: dts: rockchip: add rk805 node for rk3328-evb
  arm64: dts: rockchip: Assign mic irq to correct device for Gru
  arm64: dts: rockchip: init rk3399 vop clock rates
  arm64: dts: rockchip: Add pwm nodes for rk3328
  arm64: dts: rockchip: Fix wrong rt5514 dmic delay property for Gru
  arm64: dts: rockchip: disable tx ipgap linecheck for rk3399 dwc3
  arm64: dts: rockchip: remove num-slots property from rk3399-sapphire
  arm64: dts: rockchip: Enable tsadc module on RK3328 eavluation board
  arm64: dts: rockchip: add thermal nodes for rk3328 SoC
  arm64: dts: rockchip: add tsadc node for rk3328 SoC
  arm64: dts: rockchip: add rk3328 i2s nodes
  ...

This commit adds the base Device Tree files for the Armada 8KPlus.
The Armada 8KP SoCs include several hardware blocks, and this
commit only adds support for the AP810 block, that contains the CPU
core and basic peripherals.

AP810 is a high-performance die, includes octal core application
processor based ARMv8-A architecture, two standard high speed DDR4
interface, and GIC-600 interrupt controller.
AP810 Built as part of Marvell’s MoChi AP family products.

Armada-8080 (8KPlus family), include an AP810 block that contains
the CPU core and basic peripherals.

This commit creates the following hierarchy:
 * armada-ap810-ap0.dtsi - definitions common to AP810
 	* armada-ap810-ap0-octa-core.dtsi - description of the octa cores
		* armada-8080.dtsi - description of the 8080 SoC
			* armada-8080-db.dts - description of the 8080 board
Signed-off-by: Hanna Hawa <hannah@marvell.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a
video connector for MIPI-DSI/CSI and eDP adapter.

This dts is for usage with the RK3399-Q7 SoM Puma.
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.

It provides the following feature set:
 * up to 4GB DDR3
 * on-module SPI-NOR flash
 * on-module eMMC (with 8-bit 1.8V interface)
 * SD card (on a baseboad) via edge connector
 * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY
 * HDMI/eDP/2x MIPI-DSI
 * 2x MIPI-CSI
 * USB
   - 1x USB 3.0 dual-role (direct connection)
   - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
 * on-module STM32 Cortex-M0 companion controller, implementing:
   - low-power RTC functionality (ISL1208 emulation)
   - fan controller (AMC6821 emulation)
   - USB<->CAN bridge controller
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

RK3399-Q7 is a Qseven compatible system-on-module by Theobroma Systems.

This adds the module and the EVK baseboard "Haikou"
Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The ROCK64 is a credit card size 4K60P HDR Media Board Computer using the
Rockchip RK3328 Quad-Core ARM Cortex A53 64-Bit Processor and supporting
up to 4GB 1600MHz LPDDR3 memory. It provides eMMC module socket, MicroSD
Card slot, Pi-2 Bus, Pi-P5+ Bus, USB 3.0 and many others peripheral
devices interface for makers to integrate with sensors and devices.

The devicetree currently supports basic peripherals, with more to be
added later on.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch add pdm controller device node for rk3328.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

This patch describes the GPIO lines usage on the LibreTech CC board.

This is useful in the debugfs gpio file and using the cdev gpio API.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: minor whiespace fix]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Linux 4.13-rc4

This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

The AO clkc needs to be updated to new bindings with an system control parent
node and moving the clkc node as subnode.

Also adds the SoC specific compatible following the bindings requirements.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Amlogic clock headers updates for 4.14

* meson8b: add the reset controller to the clkc
* meson: expose all clk ids
* gxbb-aoclk: Add CEC 32k clock
* gxbb: add mmc input 0 clocks
* meson: fix protection against undefined clks

* tag 'meson-clk-headers-for-4.14' of git://github.com/BayLibre/clk-meson:
  dt-bindings: clock: gxbb-aoclk: Add CEC 32k clock
  clk: meson: gxbb: Add sd_emmc clk0 clkids
  clk: meson-gxbb: expose almost every clock in the bindings
  clk: meson8b: expose every clock in the bindings
  clk: meson: gxbb: fix protection against undefined clks
  clk: meson: meson8b: fix protection against undefined clks
  dt-bindings: clock: meson8b: describe the embedded reset controller

Pull "arm64: Xilinx ZynqMP DT fixes for v4.14" from Michal Simek:

- Fix DTC warnings
- Add idle states, OP, cci-400, RTC, pcie prefetchable memory
  fpd/lpd dmas, clocks for ep108
- Enable can1
- Fix smmu IRQ, aliases, uart compatible string
- Use generic compatible string for i2c eeprom

* tag 'zynqmp-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add generic compatible string for I2C EEPROM
  arm64: zynqmp: Add missing mmc aliases in ep108
  arm64: zynqmp: Enable can1 for ep108
  arm64: zynqmp: Added clocks to DT for ep108
  arm64: zynqmp: Use C pre-processor for includes
  arm64: zynqmp: Add fpd/lpd dmas
  arm64: zynqmp: Set status disabled in dtsi
  arm64: zynqmp: Add new uartps compatible string
  arm64: zynqmp: Correct IRQ nr for the SMMU
  arm64: zynqmp: Add support for RTC
  arm64: zynqmp: Adding prefetchable memory space to pcie node
  arm64: zynqmp: Add CCI-400 node
  arm64: zynqmp: Add dcc console for zynqmp
  arm64: zynqmp: Add operating points
  arm64: zynqmp: Add idle state for ZynqMP
  arm64: zynqmp: Add references to cpu nodes
  arm64: zynqmp: Move nodes which have no reg property out of bus
  arm64: zynqmp: Remove leading 0s from mtd table for spi flashes
  arm64: dts: xilinx: fix PCI bus dtc warnings

Add VPU/VDEC/IEP/ISP0/ISP1 iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add IEP/ISP/VOP/HEVC/VPU iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Add H265e/VEPU/VPU/VDEC/VOP iommu nodes
Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing mmc aliases.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch enables can1 for ep108.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added clks for ep108 platform.
Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This enables option to use dt binding
headers.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Wire fpd and lpd dma channels to zynqmp.dtsi.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Do not enable smmu via dtsi. Enable it in board file when needed.
Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Mainline kernel has r1p12 compatible string now. Use this new compatible
string and also append generic compatible string.
Keep in your mind that using this generic compatible string not all uart
features will be available.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add support for RTC.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Adding prefetchable memory space to pcie device tree node.
Shifting configuration space to 64-bit address space.
Removing pcie device tree node from amba as it requires size-cells=<2>
in order to access 64-bit address space.
Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add CCI-400 node to DTSI.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add debug console to dtsi to be able to enable it in
board dts file.
Keep in your mind that every core has separate dcc port in case you want
to run SMP kernel.
DCC is very helpful communication channel for debugging.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Adding operating-points-v2 for zynqmp.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Added the idle-states node to describe zynqmp idle states. Only
cpu-sleep-0 idle state is added in this patch. References to the
idle-states node are added in all CPU nodes. Time values: entry/exit
latencies and min-residency, needs to be tuned. arm,psci-suspend-param
is selected to comply with PSCIv1.0 and Extended StateID format.
Signed-off-by: Stefan Krsmanovic <stefan.krsmanovic@aggios.com>
Acked-by: Will Wong <willw@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add missing references to all cpu nodes.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>

Nodes without reg properties shouldn't be placed in amba node.
Move them out.

Warnings:
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/misc_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/i2c_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Node /amba/sata_clk missing or empty reg/ranges property
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (simple_bus_reg):
Signed-off-by: Michal Simek <michal.simek@xilinx.com>