- 16 Feb, 2018 11 commits
-
-
Michael Ellerman authored
commit aa8a5e00 upstream. On some CPUs we can prevent the Meltdown vulnerability by flushing the L1-D cache on exit from kernel to user mode, and from hypervisor to guest. This is known to be the case on at least Power7, Power8 and Power9. At this time we do not know the status of the vulnerability on other CPUs such as the 970 (Apple G5), pasemi CPUs (AmigaOne X1000) or Freescale CPUs. As more information comes to light we can enable this, or other mechanisms on those CPUs. The vulnerability occurs when the load of an architecturally inaccessible memory region (eg. userspace load of kernel memory) is speculatively executed to the point where its result can influence the address of a subsequent speculatively executed load. In order for that to happen, the first load must hit in the L1, because before the load is sent to the L2 the permission check is performed. Therefore if no kernel addresses hit in the L1 the vulnerability can not occur. We can ensure that is the case by flushing the L1 whenever we return to userspace. Similarly for hypervisor vs guest. In order to flush the L1-D cache on exit, we add a section of nops at each (h)rfi location that returns to a lower privileged context, and patch that with some sequence. Newer firmwares are able to advertise to us that there is a special nop instruction that flushes the L1-D. If we do not see that advertised, we fall back to doing a displacement flush in software. For guest kernels we support migration between some CPU versions, and different CPUs may use different flush instructions. So that we are prepared to migrate to a machine with a different flush instruction activated, we may have to patch more than one flush instruction at boot if the hypervisor tells us to. In the end this patch is mostly the work of Nicholas Piggin and Michael Ellerman. However a cast of thousands contributed to analysis of the issue, earlier versions of the patch, back ports testing etc. Many thanks to all of them. Tested-by:
Jon Masters <jcm@redhat.com> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> [Balbir - back ported to stable with changes] Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Piggin authored
commit c7305645 upstream. In the SLB miss handler we may be returning to user or kernel. We need to add a check early on and save the result in the cr4 register, and then we bifurcate the return path based on that. Signed-off-by:
-
Nicholas Piggin authored
commit b8e90cb7 upstream. In the syscall exit path we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that. Signed-off-by:
-
Nicholas Piggin authored
commit a08f828c upstream. Similar to the syscall return path, in fast_exception_return we may be returning to user or kernel context. We already have a test for that, because we conditionally restore r13. So use that existing test and branch, and bifurcate the return based on that. Signed-off-by:
-
Nicholas Piggin authored
commit 222f20f1 upstream. This commit does simple conversions of rfi/rfid to the new macros that include the expected destination context. By simple we mean cases where there is a single well known destination context, and it's simply a matter of substituting the instruction for the appropriate macro. Signed-off-by:
-
Nicholas Piggin authored
commit 50e51c13 upstream. The rfid/hrfid ((Hypervisor) Return From Interrupt) instruction is used for switching from the kernel to userspace, and from the hypervisor to the guest kernel. However it can and is also used for other transitions, eg. from real mode kernel code to virtual mode kernel code, and it's not always clear from the code what the destination context is. To make it clearer when reading the code, add macros which encode the expected destination context. Signed-off-by:
-
Michael Neuling authored
commit 191eccb1 upstream. A new hypervisor call has been defined to communicate various characteristics of the CPU to guests. Add definitions for the hcall number, flags and a wrapper function. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Alan Modra authored
commit c153693d upstream. PowerPC64 uses the symbol .TOC. much as other targets use _GLOBAL_OFFSET_TABLE_. It identifies the value of the GOT pointer (or in powerpc parlance, the TOC pointer). Global offset tables are generally local to an executable or shared library, or in the kernel, module. Thus it does not make sense for a module to resolve a relocation against .TOC. to the kernel's .TOC. value. A module has its own .TOC., and indeed the powerpc64 module relocation processing ignores the kernel value of .TOC. and instead calculates a module-local value. This patch removes code involved in exporting the kernel .TOC., tweaks modpost to ignore an undefined .TOC., and the module loader to twiddle the section symbol so that .TOC. isn't seen as undefined. Note that if the kernel was compiled with -msingle-pic-base then ELFv2 would not have function global entry code setting up r2. In that case the module call stubs would need to be modified to set up r2 using the kernel .TOC. value, requiring some of this code to be reinstated. mpe: Furthermore a change in binutils master (not yet released) causes the current way we handle the TOC to no longer work when building with MODVERSIONS=y and RELOCATABLE=n. The symptom is that modules can not be loaded due to there being no version found for TOC. Signed-off-by:
Alan Modra <amodra@gmail.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 5a69aec9 upstream. VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers. Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled. Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled. Fixes: 72cd7b44 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Backported due to changed context] Signed-off-by:
-
Oliver O'Halloran authored
commit 8f5f525d upstream. When the kernel is compiled to use 64bit ABIv2 the _GLOBAL() macro does not include a global entry point. A function's global entry point is used when the function is called from a different TOC context and in the kernel this typically means a call from a module into the vmlinux (or vice-versa). There are a few exported asm functions declared with _GLOBAL() and calling them from a module will likely crash the kernel since any TOC relative load will yield garbage. flush_icache_range() and flush_dcache_range() are both exported to modules, and use the TOC, so must use _GLOBAL_TOC(). Fixes: 721aeaa9 ("powerpc: Build little endian ppc64 kernel with ABIv2") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Naveen N. Rao authored
commit 844e3be4 upstream. Classic BPF JIT was never ported completely to work on little endian powerpc. However, it can be enabled and will crash the system when used. As such, disable use of BPF JIT on ppc64le. Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
- 03 Feb, 2018 29 commits
-
-
Greg Kroah-Hartman authored
-
Stefan Agner authored
commit d593574a upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Fabio Estevam authored
commit 38b1f0fb upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b ("serial: imx: allow waking up on RTSD") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Martin Kaiser <martin@kaiser.cx> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Mark Salyzyn authored
In the absence of commit a4298e45 ("net: add SOCK_RCU_FREE socket flag") and all the associated infrastructure changes to take advantage of a RCU grace period before freeing, there is a heightened possibility that a security check is performed while an ill-timed setsockopt call races in from user space. It then is prudent to null check sk_security, and if the case, reject the permissions. Because of the nature of this problem, hard to duplicate, no clear path, this patch is a simplified band-aid for stable trees lacking the infrastructure for the series of commits leading up to providing a suitable RCU grace period. This adjustment is orthogonal to infrastructure improvements that may nullify the needed check, but could be added as good code hygiene in all trees. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14233 Comm: syz-executor2 Not tainted 4.4.112-g5f6325b #28 task: ffff8801d1095f00 task.stack: ffff8800b5950000 RIP: 0010:[<ffffffff81b69b7e>] [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP: 0018:ffff8800b5957ce0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 1ffff10016b2af9f RCX: ffffffff81b69b51 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000010 RBP: ffff8800b5957de0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 1ffff10016b2af68 R12: ffff8800b5957db8 R13: 0000000000000000 R14: ffff8800b7259f40 R15: 00000000000000d7 FS: 00007f72f5ae2700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000a2fa38 CR3: 00000001d7980000 CR4: 0000000000160670 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Stack: ffffffff81b69a1f ffff8800b5957d58 00008000b5957d30 0000000041b58ab3 ffffffff83fc82f2 ffffffff81b69980 0000000000000246 ffff8801d1096770 ffff8801d3165668 ffffffff8157844b ffff8801d1095f00 ffff880000000001 Call Trace: [<ffffffff81b6a19d>] selinux_socket_setsockopt+0x4d/0x80 security/selinux/hooks.c:4338 [<ffffffff81b4873d>] security_socket_setsockopt+0x7d/0xb0 security/security.c:1257 [<ffffffff82df1ac8>] SYSC_setsockopt net/socket.c:1757 [inline] [<ffffffff82df1ac8>] SyS_setsockopt+0xe8/0x250 net/socket.c:1746 [<ffffffff83776499>] entry_SYSCALL_64_fastpath+0x16/0x92 Code: c2 42 9b b6 81 be 01 00 00 00 48 c7 c7 a0 cb 2b 84 e8 f7 2f 6d ff 49 8d 7d 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 83 01 00 00 41 8b 75 10 31 RIP [<ffffffff81b69b7e>] sock_has_perm+0x1fe/0x3e0 security/selinux/hooks.c:4069 RSP <ffff8800b5957ce0> ---[ end trace 7b5aaf788fef6174 ]--- Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Paul Moore <paul@paul-moore.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: selinux@tycho.nsa.gov Cc: linux-security-module@vger.kernel.org Cc: Eric Paris <eparis@parisplace.org> Cc: Serge E. Hallyn <serge@hallyn.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
commit cbeef22f upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hemant Kumar authored
commit ce5bf9a5 upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Badhri <badhri@google.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by:
Hemant Kumar <hemantk@codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 46fe895e upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by:
Max Schulze <max.schulze@posteo.de> Tested-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Shuah Khan authored
commit ef824501 upstream. usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit ef54cf0c upstream. usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Signed-off-by:
-
Jia-Ju Bai authored
commit c7b8f778 upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Oliver Neukum authored
commit df1cc78a upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by:
-
Hans de Goede authored
commit f0386c08 upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by:
-
Greg Kroah-Hartman authored
commit d08dd3f3 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by:
"Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw> Acked-by:
-
OKAMOTO Yoshiaki authored
commit 69341bd1 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by:
Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Signed-off-by:
Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Acked-by:
-
Larry Finger authored
[ Upstream commit b77992d2 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b2fc059f ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7c ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Icenowy Zheng authored
[ Upstream commit 04226916 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 72753590 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa497613 ("ufs: Add regulator enable support") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Guilherme G. Piccoli authored
[ Upstream commit e4717292 ] As part of the scsi EH path, aacraid performs a reinitialization of the adapter, which encompass freeing resources and IRQs, NULLifying lots of pointers, and then initialize it all over again. We've identified a problem during the free IRQ portion of this path if CONFIG_DEBUG_SHIRQ is enabled on kernel config file. Happens that, in case this flag was set, right after free_irq() effectively clears the interrupt, it checks if it was requested as IRQF_SHARED. In positive case, it performs another call to the IRQ handler on driver. Problem is: since aacraid currently free some resources *before* freeing the IRQ, once free_irq() path calls the handler again (due to CONFIG_DEBUG_SHIRQ), aacraid crashes due to NULL pointer dereference with the following trace: aac_src_intr_message+0xf8/0x740 [aacraid] __free_irq+0x33c/0x4a0 free_irq+0x78/0xb0 aac_free_irq+0x13c/0x150 [aacraid] aac_reset_adapter+0x2e8/0x970 [aacraid] aac_eh_reset+0x3a8/0x5d0 [aacraid] scsi_try_host_reset+0x74/0x180 scsi_eh_ready_devs+0xc70/0x1510 scsi_error_handler+0x624/0xa20 This patch prevents the crash by changing the order of the deinitialization in this path of aacraid: first we clear the IRQ, then we free other resources. No functional change intended. Signed-off-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 22a6c837 ] Fix some complaints from the UBSAN about signed integer addition overflows. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 8677b1ac ] If we don't find a matching device node, we must free the memory allocated in 'omap_dmm' a few lines above. Fixes: 7cb0d6c1 ("drm/omap: fix TILER on OMAP5") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Yisheng Xie authored
[ Upstream commit bde5f6bc ] kmemleak_scan() will scan struct page for each node and it can be really large and resulting in a soft lockup. We have seen a soft lockup when do scan while compile kernel: watchdog: BUG: soft lockup - CPU#53 stuck for 22s! [bash:10287] [...] Call Trace: kmemleak_scan+0x21a/0x4c0 kmemleak_write+0x312/0x350 full_proxy_write+0x5a/0xa0 __vfs_write+0x33/0x150 vfs_write+0xad/0x1a0 SyS_write+0x52/0xc0 do_syscall_64+0x61/0x1a0 entry_SYSCALL64_slow_path+0x25/0x25 Fix this by adding cond_resched every MAX_SCAN_SIZE. Link: http://lkml.kernel.org/r/1511439788-20099-1-git-send-email-xieyisheng1@huawei.comSigned-off-by:
Yisheng Xie <xieyisheng1@huawei.com> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 4ba161a7 ] Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Tested-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Tetsuo Handa authored
[ Upstream commit 88bc0ede ] register_shrinker() might return -ENOMEM error since Linux 3.12. Call panic() as with other failure checks in this function if register_shrinker() failed. Fixes: 1d3d4437 ("vmscan: per-node deferred work") Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Jan Kara <jack@suse.com> Cc: Michal Hocko <mhocko@suse.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 15bfe05c ] On 64-bit (e.g. powerpc64/allmodconfig): drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); ^ cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer. Note that several other fields in struct cdmac_bd are also too small to hold physical addresses on 64-bit platforms. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Robert Lippert authored
[ Upstream commit bd467e4e ] Power values in the 100s of watt range can easily blow past 32bit math limits when processing everything in microwatts. Use 64bit math instead to avoid these issues on common 32bit ARM BMC platforms. Fixes: 442aba78 ("hwmon: PMBus device driver") Signed-off-by:
Robert Lippert <rlippert@google.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit 81833de1 ] restart_grace() uses hardcoded init_net. It can cause to "list_add double add" in following scenario: 1) nfsd and lockd was started in several net namespaces 2) nfsd in init_net was stopped (lockd was not stopped because it have users from another net namespaces) 3) lockd got signal, called restart_grace() -> set_grace_period() and enabled lock_manager in hardcoded init_net. 4) nfsd in init_net is started again, its lockd_up() calls set_grace_period() and tries to add lock_manager into init_net 2nd time. Jeff Layton suggest: "Make it safe to call locks_start_grace multiple times on the same lock_manager. If it's already on the global grace_list, then don't try to add it again. (But we don't intentionally add twice, so for now we WARN about that case.) With this change, we also need to ensure that the nfsd4 lock manager initializes the list before we call locks_start_grace. While we're at it, move the rest of the nfsd_net initialization into nfs4_state_create_net. I see no reason to have it spread over two functions like it is today." Suggested patch was updated to generate warning in described situation. Suggested-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Andrew Elble authored
[ Upstream commit ae254dac ] Prevent the use of the closed (invalid) special stateid by clients. Signed-off-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit b8722857 ] Signed-off-by:
-
