We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the operation code to use to use the bundle pointer
instead of the connection pointer when printing out error messages.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the usb driver to use the bundle pointer instead of the
connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the sdio driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the light driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the pwm driver to use the bundle pointer instead of the
connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the i2c driver to use the bundle pointer instead of the
connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the gpio driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the firmware driver to use the bundle pointer instead
of the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the audio driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the hid driver to use the bundle pointer instead of the
connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the spi driver to use the bundle pointer instead of the
connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the uart driver to use the bundle pointer instead of
the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

We are removing struct device from the gb_connection structure in the
near future.  The gb_bundle structure's struct device should be used as
a replacement.

This patch moves the vibrator driver to use the bundle pointer instead
of the connection pointer.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Alex Elder <elder@linaro.org>

The greybus specification has been extended to include two new reserved
fields, which the implementation is using to track internal firmware
latencies. This change adds the appropriate fields to the corresponding
kernel header.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The ARM-specific set_irq_flags helper has been removed in 4.3. Instead
of doing conditional compilation on the kernel version to avoid build
breakages, simply use the genirq interface directly.
Suggested-by: Rob Herring <rob.herring@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add PWM to the kernel config options that shall be enabled.

When PWM is not enabled connection init will fail with

	greybus endo0:3:4:9:9: failed to register PWM: -22

when using the default manifest.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove duplicate protocol lookup error message, which has already been
logged.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make protocol lookup error more informative, by moving it to
gb_connection_bind_protocol and using dev_err.

Also make sure to use hex format for the protocol id as that is what is
used everywhere else.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing error handling when registering the vibrator protocol during
module init.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Include function, protocol name and id when printing the version
response debug message.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Issue a warning if we fail to look up a protocol when dropping a
reference.

This should never happen as we hold a reference to the protocol module
and protocols should only be deregistered at module unload.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A protocol should be deregistered exactly once when the protocol module
is being unloaded. This means that protocol deregister will never be
called with active users as we take a module reference when looking up a
protocol.

Remove comment suggesting that we could one day forcefully stop a user
of a protocol, and issue a big warning if a protocol is deregistered
more than once or at some other time than during module unload (e.g.
with active users).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Clean up and improve error messages.

Demote a warning message to warning level.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Drop FIXME about sending responses in OOM situations.

If we fail to allocate an operation for an incoming request, we have
bigger problems than to worry about sending a response.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Replace a couple of pr_err with more informative dev_err and clean up
the messages somewhat.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Replace the remaining pr_err with dev_err, and drop redundant function
prefixes.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

gb_connection_bind_protocol() returns proper error codes now and we
should destroy the connection on failures.

This change also fixes a NULL deref on hotplug when the control connection fails
to initialize.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Toshiba UniPro IP requires to reset the CPort that has been used in a previous
connection. This commit implement a new control request in order to
reset CPorts on an APBridgeA.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

When translating capabilities from greybus to mmc values add some
parentheses to clarify operation precedence and avoid static analyses
warnings.

[sdio.c:81]: (style) Clarify calculation precedence for '&' and '?'
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

It was missing the translation between the ocr vdd values of greybus to
mmc_core values. This would make the detection of range voltage fail.

mmc: host doesn't support card's voltages
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In kernel versions bellow 3.15, the mmc_card_is_removable helper
function has an extra check used for a suspend/resume hack. This made
the gd_sdio_process_event to behave badly handling the module card
insert event in that versions.

So, just test bit the flag that we need, instead of using the helper
function. This way will work in all kernel versions.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Frequency maximum and minimum are needed to complete the configuration
of the controller. Add them to get_caps response operation.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We need to skip setting E2EFC and other flags to the SVC connection
create request, for all cports, on an interface that need to boot over
unipro, i.e. interfaces required to download firmware.

This also adds a FIXME as we need to do it differently for ES3.
Tested-by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off by: Eli Sennesh <esennesh@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Currently, the greybus module .ko files are quite large and the
following error was observed during Android build for each greybus module:
strip: Unable to recognise the format of the input file `<module>`

Fix the strip build step by replacing the undefined KERNEL_TOOLCHAIN_PATH
variable with the GREYBUS_CC_PREFIX variable.  Also used as the
CROSS_COMPILER value for the module make.
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

When using greybus build in a different Android setup, it was noted that
several portions of this makefile rely on Linaro specific build items.
Replace these with more generic build steps.

- ANDROID_64 is only defined by Linaro build tasks, use TARGET_ARCH to
  establish ARCH= parameter for greybus build
- KERNEL_TOOLS_PREFIX is only defined by Linaro build tasks.  AOSP has
  a near equivalent variable: TARGET_TOOLS_PREFIX
- build-greybus was dependant on subtask: android_kernel a task defined
  only by Linaro build tasks.  Replace with a generic dependancy to
  the kernel binary located in $OUT (INSTALLED_KERNEL_TARGET).
  End result is the same: kernel must be built before greybus modules
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The generic_handle_irq_desc api only have changed in 4.3.0, so check
against the correct version, if not will break builds for 4.2.x.

Fixes: e7895cfc476 ("gpio: handle api change in generic_handle_irq_desc()")
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

generic_handle_irq_desc changed the api in the 4.2 kernel, so fix up the
gpio driver to handle this properly to keep it working.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove legacy interface to "destroy" operations, which is now just a
wrapper for gb_operation_put.

The old interface name hides the fact that all operations are refcounted
and may live on even after having "destroyed" them.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Reset the hcpriv field before returning the message to greybus core in
the OUT-URB completion callback.

This fixes a use-after-free bug when sending responses to incoming
requests as the final reference is then dropped when the message is
returned.
Reported-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

After downloading the firmware for the next boot stage, module's
firmware (for current boot stage) jumps into it and the new firmware and
sends hotplug request to SVC. On hotplug request from the SVC, the AP
first removes the existing interface.

At this time, there is no point sending disconnected event for the
firmware protocol, for the firmware used in previous stage, as the new
firmware wouldn't be aware about it.

Set flags for firmware protocol to skip control-disconnected operations.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>