- 13 Feb, 2013 40 commits
-
-
Fabio Estevam authored
da9052_i2c_fix() is only used locally, so let it be static. Fix the following sparse warning: drivers/mfd/da9052-i2c.c:63:5: warning: symbol 'da9052_i2c_fix' was not declared. Should it be static? Cc: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Fabio Estevam authored
Fix the following sparse warnings: drivers/mfd/syscon.c:40:15: warning: symbol 'syscon_node_to_regmap' was not declared. Should it be static? drivers/mfd/syscon.c:56:15: warning: symbol 'syscon_regmap_lookup_by_compatible' was not declared. Should it be static? drivers/mfd/syscon.c:72:15: warning: symbol 'syscon_regmap_lookup_by_phandle' was not declared. Should it be static? Cc: Dong Aisheng <dong.aisheng@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Jon Hunter authored
Commit 8a6aaa3 (mfd: twl-core: Collect global variables behind one private structure (global)) removed the variable "inuse" that is used to determine if the device has been initialised and now use the twl_priv structure instead. This is causing the kernel to panic on OMAP3+ devices using the twl driver, because we try to access the twl_priv->ready member before checking if twl_priv is initialised. Fix this and move this test to the beginning of the twl_i2c_read/write function because twl_get_last_module() also uses the twl_priv structure. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Samuel Ortiz authored
Merge branch 'abx500-pinctrl-for-mfd' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into for-next Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
Realtek card reader supports both SD and MS card. According to the settings of rtsx MFD driver, SD host will be probed before MS host. If we boot/reboot Linux with SD card inserted, the resetting flow of SD card will succeed, and the following resetting flow of MS is sure to fail. Then MS upper-level driver will ask rtsx driver to turn power off. This request leads to the result that the following SD commands fail and SD card can't be accessed again. In this commit, Realtek's SD and MS host driver will check whether the card that upper driver requesting is the one existing in the slot. If not, Realtek's host driver will refuse the operation to make sure the exlusive accessing at the same time. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Linus Walleij authored
When compiling the AB8500 core driver in the latest MFD tree the following happens: CC drivers/mfd/ab8500-debugfs.o /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:3: error: 'AB8500_SYS_CTRL1_BLOCK' undeclared here (not in a function) /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: array index in initializer not of integer type /home/elinwal/linux-next/drivers/mfd/ab8500-debugfs.c:157:2: error: (near initialization for 'debug_ranges') (...) This is due to a missing include statement, so fix it up. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Heiko Carstens authored
A lot of mfd drivers select MFD_CORE which however depends on GENERIC_HARDIRQS support. So add the missing dependency to all drivers to get rid of this link error: ERROR: "irq_create_mapping" [drivers/mfd/mfd-core.ko] undefined! Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
git://git.linaro.org/people/ljones/linux-3.0-ux500Samuel Ortiz authored
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
add docs for dt of max8925-mfd, max8925-backlight, and max8925-battery Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
Add max8925 dts support into mmp2 brownstone platform Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
Add device tree support in max8925 backlight. Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
update onkey driver's irq base, it should get from max8925, but not save in a private value Signed-off-by: Qing Xu <qingx@marvell.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
we encounter rtc/power/touch driver registry failure, root cause it is resources confilict in insert_resouce, solved by changing mfd_add_devices 5th parameter to NULL Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Qing Xu authored
Add irqdomains for max8925's main irq, wrap irq register operations into irqdomain's map func. it is necessary for dt support. Also, add dt support for max8925 driver. Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Catalin Marinas authored
The vexpress_sysreg_init() is a core_initcall() already and it can trigger the early initialisation if a matching node is found. This patch allows the SoC code to avoid calling vexpress_sysreg_of_early_init() explicitly. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Roger Tseng authored
Support new model RTS5227. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Roger Tseng authored
Implement different ways of selecting driving capability(a necessary adjustment along with voltage change). It was origionally in device-independent mmc/host/rtsx_pci_sdmmc.c. Moving it here to support devices which may have a different way of adjustment. Signed-off-by: Roger Tseng <rogerable@realtek.com> Reviewed-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Pawel Moll authored
The LEDs on the Versatile Express motherboard are controlled through simple memory-mapped register. This patch extends the pseudo-GPIO controller definition for these lines and creates generic "leds-gpio" device using them Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Hongbo Zhang authored
We are using a generic abx500 hwmon layer, so rename specific ab8500 to generic abx500 for hwmon device and driver matching. Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
1. Schedule card detect work at the end of the ISR 2. Callback function ops->cd_deglitch may delay for a period of time. It is not proper to call this callback when local irq disabled. 3. Card detect flow can't be executed in parallel with other card reader operations, so it's better to be protected by mutex. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
In function rtsx_pci_switch_clock, some variables, such as min_n, max_n, and max_div, are not necessary. And those assigned values look very obscure for others. It's more proper to use macro definitions here to replace these variables. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
WARNING: Avoid CamelCase: <min_N> + u8 N, min_N, max_N, clk_divider; WARNING: Avoid CamelCase: <max_N> + u8 N, min_N, max_N, clk_divider; Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
Realtek PCIe card reader only supports 32bit DMA. This declaration can improve the readability. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
In function rtsx_pci_add_sg_tbl, the statement "ptr++" is useless. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Wei WANG authored
Fix a misspelling word in comment Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Laxman Dewangan authored
The tps65090 mfd driver implement the suspend/resume callbacks which just disable and enable irqs in suspend/resume respectively. This operation is already done in irq suspend and irq_resume and hence it is not require to implement the same in the driver. Remove this non-require code. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Laxman Dewangan authored
When device is get added through DT then irq_base is 0 (zero) and in this case regmap_irq_chip_get_base() generates warning. The interrupt of this device get added through irq_domain_add_linear() when irq_base is 0. Hence pass the irq domain in place of base_irq when calling mfd_add_devices(). Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Laxman Dewangan authored
Add device tree support for the TI PMIC TPS65090. The device can be registered through platform or DT. Add device tree binding document for this device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Mark Brown authored
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Vishwanathrao Badarkhe, Manish authored
Add device tree based initialization support for TI's tps6507x mfd device. Signed-off-by: Vishwanathrao Badarkhe, Manish <manishv.b@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Yi Zhang authored
devm_* functions are device managed and make error handling and code simpler; it also fix error exit paths Signed-off-by: Yi Zhang <yizhang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Fabio Baltieri authored
This patch adds the necessary structures to use the watchdog functionality of PRCMU. The watchdog driver is named ux500_wdt. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Fabio Baltieri authored
This patch adds support for the ux500_wdt watchdog that is found in ST-Ericsson Ux500 platform. The driver is based on PRCMU APIs. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Fabio Baltieri authored
Add EXPORT_SYMBOL to db500_prcmu_*_a9wdog functions to allow usage from module. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Fabio Baltieri authored
Add definition of watchdog IDs to be used by ux500_wdt driver. Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Aaron Sierra authored
In ICH5 and earlier the GPIOBASE and GPIOCTRL registers are found at offsets 0x58 and 0x5C, respectively. This patch allows GPIO access to properly be enabled (and disabled) for these chipsets. Signed-off-by: Agócs Pál <agocs.pal.86@gmail.com> Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Peter Ujfalusi authored
twl_i2c_read/write_u8 become as a simple wrapper over the twl_i2c_read/write. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Peter Ujfalusi authored
With the regmap conversion there is no longeer a need to allocate bigger buffer for writes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Peter Ujfalusi authored
Gather the global variables under a single structure and allocate it with devm_kzalloc(). It is easier to see them and if in the future we try to add support for multiple instance of twl in the system it is going to be much simpler. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-
Peter Ujfalusi authored
We can fail earlier in case multiple instance of the twl-core is tried to be loaded. The twl-core by design only supports one instance. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
-