- 09 May, 2007 40 commits
-
-
Martin Peschke authored
We can save some lines of code by using seq_release_private(). Signed-off-by:
Martin Peschke <mp3@de.ibm.com> Acked-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ahmed S. Darwish authored
Use ARRAY_SIZE macro already defined in kernel.h Signed-off-by:
Ahmed S. Darwish <darwish.07@gmail.com> Acked-by:
-
Michal Piotrowski authored
My geforce isn't supported by nvidia frame buffer. /sbin/lspci 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 02e2 (rev a2) /usr/sbin/fbset -i mode "1024x768-60" # D: 65.003 MHz, H: 48.365 kHz, V: 60.006 Hz geometry 1024 768 1024 32767 8 timings 15384 160 24 29 3 136 6 accel true rgba 8/0,8/0,8/0,0/0 endmode Frame buffer device information: Name : NV2e Address : 0xe0000000 Size : 134217728 Type : PACKED PIXELS Visual : PSEUDOCOLOR XPanStep : 8 YPanStep : 1 YWrapStep : 0 LineLength : 1024 MMIO Address: 0xf6000000 MMIO Size : 16777216 Accelerator : Unknown (46) Here is a patch for this problem. Signed-off-by:Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Haavard Skinnemoen authored
Provide framebuffer page protection flags and definitions of fb_readl/fb_writel for AVR32. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Antonino A. Daplas authored
Move fb_get_caps() method to svgalib.c as svga_get_caps() so it can be used by s3fb, arkfb and vt8623fb. Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Ondrej Zajicek authored
This patch adds fbdev driver for graphics cards with ARK Logic 2000PV graphics chip with ICS 5342 ramdac. [adaplas@gmail.com: build fixes] Signed-off-by:
Ondrej Zajicek <santiago@crfreenet.org> Signed-off-by:
-
Ondrej Zajicek authored
This patch adds fbdev driver for graphics core in VIA VT8623 [adaplas@gmail.com: build fixes] Signed-off-by:
-
David Rientjes authored
Replace automatic variable instances of __attribute__ ((unused)) with __maybe_unused. Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
David Rientjes authored
Replace automatic variable instances of __attribute__((unused)) with __maybe_unused in mca_nmi_hook(). Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
David Rientjes authored
There is no such thing as labeling a variable as __attribute__((used)). Since ts_shift is not referenced in inline assembly, we assume that we're simply suppressing a warning here if the variable is declared but unreferenced. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
David Rientjes authored
Use the new macro here Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
David Rientjes authored
__used is defined to be __attribute__((unused)) for all pre-3.3 gcc compilers to suppress warnings for unused functions because perhaps they are referenced only in inline assembly. It is defined to be __attribute__((used)) for gcc 3.3 and later so that the code is still emitted for such functions. __maybe_unused is defined to be __attribute__((unused)) for both function and variable use if it could possibly be unreferenced due to the evaluation of preprocessor macros. Function prototypes shall be marked with __maybe_unused if the actual definition of the function is dependant on preprocessor macros. No update to compiler-intel.h is necessary because ICC supports both __attribute__((used)) and __attribute__((unused)) as specified by the gcc manual. __attribute_used__ is deprecated and will be removed once all current code is converted to using __used. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Roman Zippel authored
This finally renames the thread_info field in task structure to stack, so that the assumptions about this field are gone and archs have more freedom about placing the thread_info structure. Nonbroken archs which have a proper thread pointer can do the access to both current thread and task structure via a single pointer. It'll allow for a few more cleanups of the fork code, from which e.g. ia64 could benefit. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> [akpm@linux-foundation.org: build fix] Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Andi Kleen <ak@muc.de> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Roman Zippel authored
Recently a few direct accesses to the thread_info in the task structure snuck back, so this wraps them with the appropriate wrapper. Signed-off-by:
-
Roman Zippel authored
This will later allow an arch to add module specific information via linker generated tables instead of poking directly in the module object structure. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Thomas Gleixner authored
We need to make sure that the clocksources are resumed, when timekeeping is resumed. The current resume logic does not guarantee this. Add a resume function pointer to the clocksource struct, so clocksource drivers which need to reinitialize the clocksource can provide a resume function. Add a resume function, which calls the maybe available clocksource resume functions and resets the watchdog function, so a stable TSC can be used accross suspend/resume. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by:
-
Christoph Lameter authored
Currently the slab allocators contain callbacks into the page allocator to perform the draining of pagesets on remote nodes. This requires SLUB to have a whole subsystem in order to be compatible with SLAB. Moving node draining out of the slab allocators avoids a section of code in SLUB. Move the node draining so that is is done when the vm statistics are updated. At that point we are already touching all the cachelines with the pagesets of a processor. Add a expire counter there. If we have to update per zone or global vm statistics then assume that the pageset will require subsequent draining. The expire counter will be decremented on each vm stats update pass until it reaches zero. Then we will drain one batch from the pageset. The draining will cause vm counter updates which will then cause another expiration until the pcp is empty. So we will drain a batch every 3 seconds. Note that remote node draining is a somewhat esoteric feature that is required on large NUMA systems because otherwise significant portions of system memory can become trapped in pcp queues. The number of pcp is determined by the number of processors and nodes in a system. A system with 4 processors and 2 nodes has 8 pcps which is okay. But a system with 1024 processors and 512 nodes has 512k pcps with a high potential for large amount of memory being caught in them. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Christoph Lameter authored
Make it configurable. Code in mm makes the vm statistics intervals independent from the cache reaper use that opportunity to make it configurable. Signed-off-by:
-
Christoph Lameter authored
vmstat is currently using the cache reaper to periodically bring the statistics up to date. The cache reaper does only exists in SLUB as a way to provide compatibility with SLAB. This patch removes the vmstat calls from the slab allocators and provides its own handling. The advantage is also that we can use a different frequency for the updates. Refreshing vm stats is a pretty fast job so we can run this every second and stagger this by only one tick. This will lead to some overlap in large systems. F.e a system running at 250 HZ with 1024 processors will have 4 vm updates occurring at once. However, the vm stats update only accesses per node information. It is only necessary to stagger the vm statistics updates per processor in each node. Vm counter updates occurring on distant nodes will not cause cacheline contention. We could implement an alternate approach that runs the first processor on each node at the second and then each of the other processor on a node on a subsequent tick. That may be useful to keep a large amount of the second free of timer activity. Maybe the timer folks will have some feedback on this one? [jirislaby@gmail.com: add missing break] Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Rafael J. Wysocki authored
Make the microcode driver use the suspend-related CPU hotplug notifications to handle the CPU hotplug events occuring during system-wide suspend and resume transitions. Remove the global variable suspend_cpu_hotplug previously used for this purpose. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Rafael J. Wysocki authored
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Nate Diller authored
Now that all the in-tree users are converted over to zero_user_page(), deprecate the old memclear_highpage_flush() call. Signed-off-by:
Nate Diller <nate.diller@gmail.com> Signed-off-by:
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. Signed-off-by:
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. Signed-off-by:
-
Nate Diller authored
Use zero_user_page() instead of open-coding it. Signed-off-by:
-
Nate Diller authored
It's very common for file systems to need to zero part or all of a page, the simplist way is just to use kmap_atomic() and memset(). There's actually a library function in include/linux/highmem.h that does exactly that, but it's confusingly named memclear_highpage_flush(), which is descriptive of *how* it does the work rather than what the *purpose* is. So this patchset renames the function to zero_user_page(), and calls it from the various places that currently open code it. This first patch introduces the new function call, and converts all the core kernel callsites, both the open-coded ones and the old memclear_highpage_flush() ones. Following this patch is a series of conversions for each file system individually, per AKPM, and finally a patch deprecating the old call. The diffstat below shows the entire patchset. [akpm@linux-foundation.org: fix a few things] Signed-off-by:
-
Jarek Poplawski authored
Signed-off-by:
Jarek Poplawski <jarkao2@o2.pl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Eric Dumazet authored
Analysis of current linux futex code : -------------------------------------- A central hash table futex_queues[] holds all contexts (futex_q) of waiting threads. Each futex_wait()/futex_wait() has to obtain a spinlock on a hash slot to perform lookups or insert/deletion of a futex_q. When a futex_wait() is done, calling thread has to : 1) - Obtain a read lock on mmap_sem to be able to validate the user pointer (calling find_vma()). This validation tells us if the futex uses an inode based store (mapped file), or mm based store (anonymous mem) 2) - compute a hash key 3) - Atomic increment of reference counter on an inode or a mm_struct 4) - lock part of futex_queues[] hash table 5) - perform the test on value of futex. (rollback is value != expected_value, returns EWOULDBLOCK) (various loops if test triggers mm faults) 6) queue the context into hash table, release the lock got in 4) 7) - release the read_lock on mmap_sem <block> 8) Eventually unqueue the context (but rarely, as this part may be done by the futex_wake()) Futexes were designed to improve scalability but current implementation has various problems : - Central hashtable : This means scalability problems if many processes/threads want to use futexes at the same time. This means NUMA unbalance because this hashtable is located on one node. - Using mmap_sem on every futex() syscall : Even if mmap_sem is a rw_semaphore, up_read()/down_read() are doing atomic ops on mmap_sem, dirtying cache line : - lot of cache line ping pongs on SMP configurations. mmap_sem is also extensively used by mm code (page faults, mmap()/munmap()) Highly threaded processes might suffer from mmap_sem contention. mmap_sem is also used by oprofile code. Enabling oprofile hurts threaded programs because of contention on the mmap_sem cache line. - Using an atomic_inc()/atomic_dec() on inode ref counter or mm ref counter: It's also a cache line ping pong on SMP. It also increases mmap_sem hold time because of cache misses. Most of these scalability problems come from the fact that futexes are in one global namespace. As we use a central hash table, we must make sure they are all using the same reference (given by the mm subsystem). We chose to force all futexes be 'shared'. This has a cost. But fact is POSIX defined PRIVATE and SHARED, allowing clear separation, and optimal performance if carefuly implemented. Time has come for linux to have better threading performance. The goal is to permit new futex commands to avoid : - Taking the mmap_sem semaphore, conflicting with other subsystems. - Modifying a ref_count on mm or an inode, still conflicting with mm or fs. This is possible because, for one process using PTHREAD_PROCESS_PRIVATE futexes, we only need to distinguish futexes by their virtual address, no matter the underlying mm storage is. If glibc wants to exploit this new infrastructure, it should use new _PRIVATE futex subcommands for PTHREAD_PROCESS_PRIVATE futexes. And be prepared to fallback on old subcommands for old kernels. Using one global variable with the FUTEX_PRIVATE_FLAG or 0 value should be OK. PTHREAD_PROCESS_SHARED futexes should still use the old subcommands. Compatibility with old applications is preserved, they still hit the scalability problems, but new applications can fly :) Note : the same SHARED futex (mapped on a file) can be used by old binaries *and* new binaries, because both binaries will use the old subcommands. Note : Vast majority of futexes should be using PROCESS_PRIVATE semantic, as this is the default semantic. Almost all applications should benefit of this changes (new kernel and updated libc) Some bench results on a Pentium M 1.6 GHz (SMP kernel on a UP machine) /* calling futex_wait(addr, value) with value != *addr */ 433 cycles per futex(FUTEX_WAIT) call (mixing 2 futexes) 424 cycles per futex(FUTEX_WAIT) call (using one futex) 334 cycles per futex(FUTEX_WAIT_PRIVATE) call (mixing 2 futexes) 334 cycles per futex(FUTEX_WAIT_PRIVATE) call (using one futex) For reference : 187 cycles per getppid() call 188 cycles per umask() call 181 cycles per ni_syscall() call Signed-off-by:Eric Dumazet <dada1@cosmosbay.com> Pierre Peiffer <pierre.peiffer@bull.net> Cc: "Ulrich Drepper" <drepper@gmail.com> Cc: "Nick Piggin" <nickpiggin@yahoo.com.au> Cc: "Ingo Molnar" <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Pierre Peiffer authored
This patch provides the futex_requeue_pi functionality, which allows some threads waiting on a normal futex to be requeued on the wait-queue of a PI-futex. This provides an optimization, already used for (normal) futexes, to be used with the PI-futexes. This optimization is currently used by the glibc in pthread_broadcast, when using "normal" mutexes. With futex_requeue_pi, it can be used with PRIO_INHERIT mutexes too. Signed-off-by:
Pierre Peiffer <pierre.peiffer@bull.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
Pierre Peiffer authored
This patch modifies futex_wait() to use an hrtimer + schedule() in place of schedule_timeout(). schedule_timeout() is tick based, therefore the timeout granularity is the tick (1 ms, 4 ms or 10 ms depending on HZ). By using a high resolution timer for timeout wakeup, we can attain a much finer timeout granularity (in the microsecond range). This parallels what is already done for futex_lock_pi(). The timeout passed to the syscall is no longer converted to jiffies and is therefore passed to do_futex() and futex_wait() as an absolute ktime_t therefore keeping nanosecond resolution. Also this removes the need to pass the nanoseconds timeout part to futex_lock_pi() in val2. In futex_wait(), if there is no timeout then a regular schedule() is performed. Otherwise, an hrtimer is fired before schedule() is called. [akpm@linux-foundation.org: fix `make headers_check'] Signed-off-by:
Sebastien Dugue <sebastien.dugue@bull.net> Signed-off-by:
-
Pierre Peiffer authored
Today, all threads waiting for a given futex are woken in FIFO order (first waiter woken first) instead of priority order. This patch makes use of plist (pirotity ordered lists) instead of simple list in futex_hash_bucket. All non-RT threads are stored with priority MAX_RT_PRIO, causing them to be woken last, in FIFO order (RT-threads are woken first, in priority order). Signed-off-by:
-
Andrew Morton authored
Some smarty went and inflicted ktime_t as a typedef upon us, so we cannot forward declare it. Create a new `union ktime', map ktime_t onto that. Now we need to kill off this ktime_t thing. Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by:
-
Andrew Morton authored
Stick an unlikely() around is_aio(): I assert that most IO is synchronous. Cc: Suparna Bhattacharya <suparna@in.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
NeilBrown authored
When a lookup request arrives, nfsd uses information provided by userspace (mountd) to find the right filesystem. It then assumes that the same filehandle type as the incoming filehandle can be used to create an outgoing filehandle. However if mountd is buggy, or maybe just being creative, the filesystem may not support that filesystem type, and the kernel could oops, particularly if 'ex_uuid' is NULL but a FSID_UUID* filehandle type is used. So add some proper checking that the fsid version/type from the incoming filehandle is actually supportable, and ignore that information if it isn't supportable. Signed-off-by:
-
NeilBrown authored
1/ decode_sattr and decode_sattr3 never return NULL, so remove several checks for that. ditto for xdr_decode_hyper. 2/ replace some open coded XDR_QUADLEN calls with calls to XDR_QUADLEN 3/ in decode_writeargs, simply an 'if' to use a single calculation. .page_len is the length of that part of the packet that did not fit in the first page (the head). So the length of the data part is the remainder of the head, plus page_len. 3/ other minor cleanups. Signed-off-by:
-
Christoph Hellwig authored
kbuild directly interprets <modulename>-y as objects to build into a module, no need to assign it to the old foo-objs variable. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
NeilBrown authored
This while loop has an overly complex condition, which performs a couple of assignments. This hurts readability. We don't really need a loop at all. We can just return -EAGAIN and (providing we set SK_DATA), the function will be called again. So discard the loop, make the complex conditional become a few clear function calls, and hopefully improve readability. Signed-off-by:
-
Wei Yongjun authored
If I send a RPC_GSS_PROC_DESTROY message to NFSv4 server, it will reply with a bad rpc reply which lacks an authentication verifier. Maybe this patch is needed. Send/recv packets as following: send: RemoteProcedureCall xid rpcvers = 2 prog = 100003 vers = 4 proc = 0 cred = AUTH_GSS version = 1 gss_proc = 3 (RPCSEC_GSS_DESTROY) service = 1 (RPC_GSS_SVC_NONE) verf = AUTH_GSS checksum reply: RemoteProcedureReply xid msg_type reply_stat accepted_reply Signed-off-by:Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by:
-
Frank Filz authored
I have been investigating a module reference count leak on the server for rpcsec_gss_krb5.ko. It turns out the problem is a reference count leak for the security context in net/sunrpc/auth_gss/svcauth_gss.c. The problem is that gss_write_init_verf() calls gss_svc_searchbyctx() which does a rsc_lookup() but never releases the reference to the context. There is another issue that rpc.svcgssd sets an "end of time" expiration for the context By adding a cache_put() call in gss_svc_searchbyctx(), and setting an expiration timeout in the downcall, cache_clean() does clean up the context and the module reference count now goes to zero after unmount. I also verified that if the context expires and then the client makes a new request, a new context is established. Here is the patch to fix the kernel, I will start a separate thread to discuss what expiration time should be set by rpc.svcgssd. Acked-by:
Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by:
-
NeilBrown authored
It's not necessarily correct to assume that the xdr_buf used to hold the server's reply must have page data whenever it has tail data. And there's no need for us to deal with that case separately anyway. Acked-by:
-
