Pull 9p updates from Eric Van Hensbergen:
 "This includes a number of patches addressing improvements in the cache
  portions of the 9p client.

  The biggest improvements have to do with fixing handling of inodes and
  eliminating duplicate structures and unnecessary allocation/release of
  inode structures and many associated unnecessary protocol traffic.
  This also dramatically reduced code complexity across the code and
  sets us up to add proper temporal cache capabilities"

* tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: fix dups even in uncached mode
  fs/9p: simplify iget to remove unnecessary paths
  fs/9p: rework qid2ino logic
  fs/9p: Eliminate now unused v9fs_get_inode
  fs/9p: Eliminate redundant non-cache path in mknod
  fs/9p: remove walk and inode allocation from symlink
  fs/9p: convert mkdir to use get_new_inode
  fs/9p: switch vfsmount to use v9fs_get_new_inode

Pull fuse updates from Miklos Szeredi:

 - Add passthrough mode for regular file I/O.

   This allows performing read and write (also via memory maps) on a
   backing file without incurring the overhead of roundtrips to
   userspace. For now this is only allowed to privileged servers, but
   this limitation will go away in the future (Amir Goldstein)

 - Fix interaction of direct I/O mode with memory maps (Bernd Schubert)

 - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)

 - Allow resending queued requests for server crash recovery (Zhao Chen)

 - Misc fixes and cleanups

* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
  fuse: get rid of ff->readdir.lock
  fuse: remove unneeded lock which protecting update of congestion_threshold
  fuse: Fix missing FOLL_PIN for direct-io
  fuse: remove an unnecessary if statement
  fuse: Track process write operations in both direct and writethrough modes
  fuse: Use the high bit of request ID for indicating resend requests
  fuse: Introduce a new notification type for resend pending requests
  fuse: add support for explicit export disabling
  fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
  fuse: fix typo for fuse_permission comment
  fuse: Convert fuse_writepage_locked to take a folio
  fuse: Remove fuse_writepage
  virtio_fs: remove duplicate check if queue is broken
  fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
  fuse: don't unhash root
  fuse: fix root lookup with nonzero generation
  fuse: replace remaining make_bad_inode() with fuse_make_bad()
  virtiofs: drop __exit from virtio_fs_sysfs_exit()
  fuse: implement passthrough for mmap
  fuse: implement splice read/write passthrough
  ...

Pull ext4 updates from Ted Ts'o:
 "Ext4 bug fixes and cleanups, plus some additional kunit tests"

* tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: initialize sbi->s_freeclusters_counter and sbi->s_dirtyclusters_counter before use in kunit test
  ext4: hold group lock in ext4 kunit test
  ext4: alloc test super block from sget
  ext4: kunit: use dynamic inode allocation
  ext4: enable meta_bg only when new desc blocks are needed
  ext4: remove unused parameter biop in ext4_issue_discard()
  ext4: remove SLAB_MEM_SPREAD flag usage
  ext4: verify s_clusters_per_group even without bigalloc
  ext4: fix corruption during on-line resize
  ext4: don't report EOPNOTSUPP errors from discard
  ext4: drop duplicate ea_inode handling in ext4_xattr_block_set()
  ext4: fold quota accounting into ext4_xattr_inode_lookup_create()
  ext4: correct best extent lstart adjustment logic
  ext4: forbid commit inconsistent quota data when errors=remount-ro
  ext4: add a hint for block bitmap corrupt state in mb_groups
  ext4: fix the comment of ext4_map_blocks()/ext4_ext_map_blocks()
  ext4: improve error msg for ext4_mb_seq_groups_show
  ext4: remove unused buddy_loaded in ext4_mb_seq_groups_show
  ext4: Add unit test for ext4_mb_mark_diskspace_used
  ext4: Add unit test for mb_free_blocks
  ...

Pull bcachefs updates from Kent Overstreet:

 - Subvolume children btree; this is needed for providing a userspace
   interface for walking subvolumes, which will come later

 - Lots of improvements to directory structure checking

 - Improved journal pipelining, significantly improving performance on
   high iodepth write workloads

 - Discard path improvements: the discard path is more efficient, and no
   longer flushes the journal unnecessarily

 - Buffered write path can now avoid taking the inode lock

 - new mm helper: memalloc_flags_{save|restore}

 - mempool now does kvmalloc mempools

* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
  bcachefs: time_stats: shrink time_stat_buffer for better alignment
  bcachefs: time_stats: split stats-with-quantiles into a separate structure
  bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
  bcachefs: time_stats: add larger units
  bcachefs: pull out time_stats.[ch]
  bcachefs: reconstruct_alloc cleanup
  bcachefs: fix bch_folio_sector padding
  bcachefs: Fix btree key cache coherency during replay
  bcachefs: Always flush write buffer in delete_dead_inodes()
  bcachefs: Fix order of gc_done passes
  bcachefs: fix deletion of indirect extents in btree_gc
  bcachefs: Prefer struct_size over open coded arithmetic
  bcachefs: Kill unused flags argument to btree_split()
  bcachefs: Check for writing superblocks with nonsense member seq fields
  bcachefs: fix bch2_journal_buf_to_text()
  lib/generic-radix-tree.c: Make nodes more reasonably sized
  bcachefs: copy_(to|from)_user_errcode()
  bcachefs: Split out bkey_types.h
  bcachefs: fix lost journal buf wakeup due to improved pipelining
  bcachefs: intercept mountoption value for bool type
  ...

Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
   heap optimizations".

 - Kuan-Wei Chiu has also sped up the library sorting code in the series
   "lib/sort: Optimize the number of swaps and comparisons".

 - Alexey Gladkov has added the ability for code running within an IPC
   namespace to alter its IPC and MQ limits. The series is "Allow to
   change ipc/mq sysctls inside ipc namespace".

 - Geert Uytterhoeven has contributed some dhrystone maintenance work in
   the series "lib: dhry: miscellaneous cleanups".

 - Ryusuke Konishi continues nilfs2 maintenance work in the series

	"nilfs2: eliminate kmap and kmap_atomic calls"
	"nilfs2: fix kernel bug at submit_bh_wbc()"

 - Nathan Chancellor has updated our build tools requirements in the
   series "Bump the minimum supported version of LLVM to 13.0.1".

 - Muhammad Usama Anjum continues with the selftests maintenance work in
   the series "selftests/mm: Improve run_vmtests.sh".

 - Oleg Nesterov has done some maintenance work against the signal code
   in the series "get_signal: minor cleanups and fix".

Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.

* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
  nilfs2: prevent kernel bug at submit_bh_wbc()
  nilfs2: fix failure to detect DAT corruption in btree and direct mappings
  ocfs2: enable ocfs2_listxattr for special files
  ocfs2: remove SLAB_MEM_SPREAD flag usage
  assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
  buildid: use kmap_local_page()
  watchdog/core: remove sysctl handlers from public header
  nilfs2: use div64_ul() instead of do_div()
  mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
  kexec: copy only happens before uchunk goes to zero
  get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
  get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
  get_signal: don't abuse ksig->info.si_signo and ksig->sig
  const_structs.checkpatch: add device_type
  Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
  dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
  list: leverage list_is_head() for list_entry_is_head()
  nilfs2: MAINTAINERS: drop unreachable project mirror site
  smp: make __smp_processor_id() 0-argument macro
  fat: fix uninitialized field in nostale filehandles
  ...

Pull MM updates from Andrew Morton:

 - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
   from hotplugged memory rather than only from main memory. Series
   "implement "memmap on memory" feature on s390".

 - More folio conversions from Matthew Wilcox in the series

	"Convert memcontrol charge moving to use folios"
	"mm: convert mm counter to take a folio"

 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes. The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".

 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.

 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools". Measured improvements are modest.

 - zswap cleanups and simplifications from Yosry Ahmed in the series
   "mm: zswap: simplify zswap_swapoff()".

 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is
   hotplugged as system memory.

 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.

 - More DAMON work from SeongJae Park in the series

	"mm/damon: make DAMON debugfs interface deprecation unignorable"
	"selftests/damon: add more tests for core functionalities and corner cases"
	"Docs/mm/damon: misc readability improvements"
	"mm/damon: let DAMOS feeds and tame/auto-tune itself"

 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving
   policy wherein we allocate memory across nodes in a weighted fashion
   rather than uniformly. This is beneficial in heterogeneous memory
   environments appearing with CXL.

 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".

 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".

 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format. Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.

 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
   targeted at arm64, this significantly speeds up fork() when the
   process has a large number of pte-mapped folios.

 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
   implements batching during munmap() and other pte teardown
   situations. The microbenchmark improvements are nice.

 - And in the series "Transparent Contiguous PTEs for User Mappings"
   Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings"). Kernel build times on arm64 improved nicely. Ryan's
   series "Address some contpte nits" provides some followup work.

 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page
   faults. He has also added a reproducer under the selftest code.

 - In the series "selftests/mm: Output cleanups for the compaction
   test", Mark Brown did what the title claims.

 - Kinsey Ho has added the series "mm/mglru: code cleanup and
   refactoring".

 - Even more zswap material from Nhat Pham. The series "fix and extend
   zswap kselftests" does as claimed.

 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
   in our handling of DAX on archiecctures which have virtually aliasing
   data caches. The arm architecture is the main beneficiary.

 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides
   dramatic improvements in worst-case mmap_lock hold times during
   certain userfaultfd operations.

 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series

	"page_owner: print stacks and their outstanding allocations"
	"page_owner: Fixup and cleanup"

 - Uladzislau Rezki has contributed some vmalloc scalability
   improvements in his series "Mitigate a vmap lock contention". It
   realizes a 12x improvement for a certain microbenchmark.

 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".

 - Some zsmalloc maintenance work from Chengming Zhou in the series

	"mm/zsmalloc: fix and optimize objects/page migration"
	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"

 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0. This a step along the path to implementaton of the merging
   of large anonymous folios. The series is named "Enable >0 order folio
   memory compaction".

 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages()
   to an iterator".

 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".

 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios. The
   series is named "Split a folio to any lower order folios".

 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.

 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".

 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which
   are configured to use large numbers of hugetlb pages.

 - Matthew Wilcox's series "PageFlags cleanups" does that.

 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also. S390 is affected.

 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".

 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM
   Selftests".

 - Also, of course, many singleton patches to many things. Please see
   the individual changelogs for details.

* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
  mm/zswap: remove the memcpy if acomp is not sleepable
  crypto: introduce: acomp_is_async to expose if comp drivers might sleep
  memtest: use {READ,WRITE}_ONCE in memory scanning
  mm: prohibit the last subpage from reusing the entire large folio
  mm: recover pud_leaf() definitions in nopmd case
  selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
  selftests/mm: skip uffd hugetlb tests with insufficient hugepages
  selftests/mm: dont fail testsuite due to a lack of hugepages
  mm/huge_memory: skip invalid debugfs new_order input for folio split
  mm/huge_memory: check new folio order when split a folio
  mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
  mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
  mm: fix list corruption in put_pages_list
  mm: remove folio from deferred split list before uncharging it
  filemap: avoid unnecessary major faults in filemap_fault()
  mm,page_owner: drop unnecessary check
  mm,page_owner: check for null stack_record before bumping its refcount
  mm: swap: fix race between free_swap_and_cache() and swapoff()
  mm/treewide: align up pXd_leaf() retval across archs
  mm/treewide: drop pXd_large()
  ...

Merge tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
 "perf stat:

   - Support new 'cluster' aggregation mode for shared resources
     depending on the hardware configuration:

        $ sudo perf stat -a --per-cluster -e cycles,instructions sleep 1

         Performance counter stats for 'system wide':

        S0-D0-CLS0    2         85,051,822      cycles
        S0-D0-CLS0    2         73,909,908      instructions      #    0.87  insn per cycle
        S0-D0-CLS2    2         93,365,918      cycles
        S0-D0-CLS2    2         83,006,158      instructions      #    0.89  insn per cycle
        S0-D0-CLS4    2        104,157,523      cycles
        S0-D0-CLS4    2         53,234,396      instructions      #    0.51  insn per cycle
        S0-D0-CLS6    2         65,891,079      cycles
        S0-D0-CLS6    2         41,478,273      instructions      #    0.63  insn per cycle

               1.002407989 seconds time elapsed

   - Various fixes and cleanups for event metrics including NaN handling

  perf script:

   - Use libcapstone if available to disassemble the instructions. This
     enables 'perf script -F disasm' and 'perf script --insn-trace=disasm'
     (for Intel-PT):

        $ perf script -F event,ip,disasm
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffa9839d25             movq %rax, %r14
        cycles:P:  ffffffffa9cdcaf0             endbr64
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffaa401f86             iretq
        cycles:P:  ffffffffa99c4de5             movq 0x30(%rcx), %r8
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffaa401f86             iretq
        cycles:P:  ffffffffa9907983             movl 0x68(%rbx), %eax
        cycles:P:  ffffffffa988d428             wrmsr

   - Expose sample ID / stream ID to python scripts

  perf test:

   - Add more perf test cases from Redhat internal test suites. This
     time it adds the base infra and a few perf probe tests. More to
     come. :)

   - Add 'perf test -p' for parallel execution and fix some issues found
     by the parallel test

   - Support symbol test to print symbols in given (active) module:

        $ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/fs/ext4/ext4.ko
        --- start ---
        Testing /lib/modules/6.5.13-1rodete2-amd64/kernel/fs/ext4/ext4.ko
        Overlapping symbols:
         7a990-7a9a0 l __pfx_ext4_exit_fs
         7a990-7a9a0 g __pfx_cleanup_module
        Overlapping symbols:
         7a9a0-7aa1c l ext4_exit_fs
         7a9a0-7aa1c g cleanup_module
        ...

  JSON metric updates:

   - A new round of Intel metric updates

   - Support Power11 PVR (compatible to Power10)

   - Fix cache latency events on Zen 4 to set SliceId properly

  Internal:

   - Fix reference counting for 'map' data structure, tireless work from
     Ian!

   - More memory optimization for struct thread and annotate histogram.
     Now, 'perf report' (TUI) and 'perf annotate' should be much
     lighter-weight in terms of memory footprint

   - Support cross-arch perf register access. Clean up the build
     configuration so that it can detect arch-register support at
     runtime. This can allow to parse register data in sample which was
     recorded in a different arch

  Others:

   - Sync task state in 'perf sched' to kernel using trace event fields.
     The task states have been changed so tools cannot assume a fixed
     encoding

   - Clean up 'perf mem' to generalize the arch-specific events

   - Add support for local and global variables to data type profiling.
     This would increase the success rate of type resolution with DWARF

   - Add short option -H for --hierarchy in 'perf report' and 'perf top'"

* tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (154 commits)
  perf annotate: Add comments in the data structures
  perf annotate: Remove sym_hist.addr[] array
  perf annotate: Calculate instruction overhead using hashmap
  perf annotate: Add a hashmap for symbol histogram
  perf threads: Reduce table size from 256 to 8
  perf threads: Switch from rbtree to hashmap
  perf threads: Move threads to its own files
  perf machine: Move machine's threads into its own abstraction
  perf machine: Move fprintf to for_each loop and a callback
  perf trace: Ignore thread hashing in summary
  perf report: Sort child tasks by tid
  perf vendor events amd: Fix Zen 4 cache latency events
  perf version: Display availability of OpenCSD support
  perf vendor events intel: Add umasks/occ_sel to PCU events.
  perf map: Fix map reference count issues
  libperf evlist: Avoid out-of-bounds access
  perf lock contention: Account contending locks too
  perf metrics: Fix segv for metrics with no events
  perf metrics: Fix metric matching
  perf pmu: Fix a potential memory leak in perf_pmu__lookup()
  ...

Merge tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

 - Do not update shortest_full in rb_watermark_hit() if the watermark is
   hit. The shortest_full field was being updated regardless if the task
   was going to wait or not. If the watermark is hit, then the task is
   not going to wait, so do not update the shortest_full field (used by
   the waker).

 - Update shortest_full field before setting the full_waiters_pending
   flag

   In the poll logic, the full_waiters_pending flag was being set before
   the shortest_full field was set. If the full_waiters_pending flag is
   set, writers will check the shortest_full field which has the least
   percentage of data that the ring buffer needs to be filled before
   waking up. The writer will check shortest_full if
   full_waiters_pending is set, and if the ring buffer percentage filled
   is greater than shortest full, then it will call the irq_work to wake
   up the waiters.

   The problem was that the poll logic set the full_waiters_pending flag
   before updating shortest_full, which when zero will always trigger
   the writer to call the irq_work to wake up the waiters. The irq_work
   will reset the shortest_full field back to zero as the woken waiters
   is suppose to reset it.

 - There's some optimized logic in the rb_watermark_hit() that is used
   in ring_buffer_wait(). Use that helper function in the poll logic as
   well.

 - Restructure ring_buffer_wait() to use wait_event_interruptible()

   The logic to wake up pending readers when the file descriptor is
   closed is racy. Restructure ring_buffer_wait() to allow callers to
   pass in conditions besides the ring buffer having enough data in it
   by using wait_event_interruptible().

 - Update the tracing_wait_on_pipe() to call ring_buffer_wait() with its
   own conditions to exit the wait loop.

* tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/ring-buffer: Fix wait_on_pipe() race
  ring-buffer: Use wait_event_interruptible() in ring_buffer_wait()
  ring-buffer: Reuse rb_watermark_hit() for the poll logic
  ring-buffer: Fix full_waiters_pending in poll
  ring-buffer: Do not set shortest_full when full target is hit

Pull probes updates from Masami Hiramatsu:
 "x86 kprobes:

   - Use boolean for some function return instead of 0 and 1

   - Prohibit probing on INT/UD. This prevents user to put kprobe on
     INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a
     special purpose in the kernel

   - Boost Grp instructions. Because a few percent of kernel
     instructions are Grp 2/3/4/5 and those are safe to be executed
     without ip register fixup, allow those to be boosted (direct
     execution on the trampoline buffer with a JMP)

  tracing:

   - Add function argument access from return events (kretprobe and
     fprobe). This allows user to compare how a data structure field is
     changed after executing a function. With BTF, return event also
     accepts function argument access by name.

   - Fix a wrong comment (using "Kretprobe" in fprobe)

   - Cleanup a big probe argument parser function into three parts, type
     parser, post-processing function, and main parser

   - Cleanup to set nr_args field when initializing trace_probe instead
     of counting up it while parsing

   - Cleanup a redundant #else block from tracefs/README source code

   - Update selftests to check entry argument access from return probes

   - Documentation update about entry argument access from return
     probes"

* tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation: tracing: Add entry argument access at function exit
  selftests/ftrace: Add test cases for entry args at function exit
  tracing/probes: Support $argN in return probe (kprobe and fprobe)
  tracing: Remove redundant #else block for BTF args from README
  tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init
  tracing/probes: Cleanup probe argument parser
  tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event
  x86/kprobes: Boost more instructions from grp2/3/4/5
  x86/kprobes: Prohibit kprobing on INT and UD
  x86/kprobes: Refactor can_{probe,boost} return type to bool

Pull lsm fixes from Paul Moore:
 "Two fixes to address issues with the LSM syscalls that we shipped in
  Linux v6.8. The first patch might be a bit controversial, but the
  second is a rather straightforward fix; more on both below.

  The first fix from Casey addresses a problem that should have been
  caught during the ~16 month (?) review cycle, but sadly was not. The
  good news is that Dmitry caught it very quickly once Linux v6.8 was
  released. The core issue is the use of size_t parameters to pass
  buffer sizes back and forth in the syscall; while we could have solved
  this with a compat syscall definition, given the newness of the
  syscalls I wanted to attempt to just redefine the size_t parameters as
  u32 types and avoid the work associated with a set of compat syscalls.

  However, this is technically a change in the syscall's signature/API
  so I can understand if you're opposed to this, even if the syscalls
  are less than a week old.

   [ Fingers crossed nobody even notices - Linus ]

  The second fix is a rather trivial fix to allow userspace to call into
  the lsm_get_self_attr() syscall with a NULL buffer to quickly
  determine a minimum required size for the buffer. We do have
  kselftests for this very case, I'm not sure why I didn't notice the
  failure; I'm going to guess stupidity, tired eyes, I dunno. My
  apologies we didn't catch this earlier"

* tag 'lsm-pr-20240314' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: handle the NULL buffer case in lsm_fill_user_ctx()
  lsm: use 32-bit compatible data types in LSM syscalls

Pull landlock updates from Mickaël Salaün:
 "Some miscellaneous improvements, including new KUnit tests, extended
  documentation and boot help, and some cosmetic cleanups.

  Additional test changes already went through the net tree"

* tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  samples/landlock: Don't error out if a file path cannot be opened
  landlock: Use f_cred in security_file_open() hook
  landlock: Rename "ptrace" files to "task"
  landlock: Simplify current_check_access_socket()
  landlock: Warn once if a Landlock action is requested while disabled
  landlock: Extend documentation for kernel support
  landlock: Add support for KUnit tests
  selftests/landlock: Clean up error logs related to capabilities

Pull OpenRISC updates from Stafford Horne:
 "Just a few cleanups and updates that were sent in:

   - Replace asm/fixmap.h with asm-generic version

   - Fix to move memblock setup up before it's used during init"

* tag 'for-linus' of https://github.com/openrisc/linux:
  openrisc: Use asm-generic's version of fix_to_virt() & virt_to_fix()
  openrisc: Call setup_memory() earlier in the init sequence

Pull arm64 updates from Catalin Marinas:
 "The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
  pages), the dpISA extension and Rust enabled on arm64. The changes are
  mostly contained within the usual arch/arm64/, drivers/perf, the arm64
  Documentation and kselftests. The exception is the Rust support which
  touches some generic build files.

  Summary:

   - Reorganise the arm64 kernel VA space and add support for LPA2 (at
     stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
     range with 4KB and 16KB pages

   - Enable Rust on arm64

   - Support for the 2023 dpISA extensions (data processing ISA), host
     only

   - arm64 perf updates:

      - StarFive's StarLink (integrates one or more CPU cores with a
        shared L3 memory system) PMU support

      - Enable HiSilicon Erratum 162700402 quirk for HIP09

      - Several updates for the HiSilicon PCIe PMU driver

      - Arm CoreSight PMU support

      - Convert all drivers under drivers/perf/ to use .remove_new()

   - Miscellaneous:

      - Don't enable workarounds for "rare" errata by default

      - Clean up the DAIF flags handling for EL0 returns (in preparation
        for NMI support)

      - Kselftest update for ptrace()

      - Update some of the sysreg field definitions

      - Slight improvement in the code generation for inline asm I/O
        accessors to permit offset addressing

      - kretprobes: acquire regs via a BRK exception (previously done
        via a trampoline handler)

      - SVE/SME cleanups, comment updates

      - Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
        disabled due to gcc silently ignoring -falign-functions=N)"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
  Revert "mm: add arch hook to validate mmap() prot flags"
  Revert "arm64: mm: add support for WXN memory translation attribute"
  Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
  ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
  kselftest/arm64: Add 2023 DPISA hwcap test coverage
  kselftest/arm64: Add basic FPMR test
  kselftest/arm64: Handle FPMR context in generic signal frame parser
  arm64/hwcap: Define hwcaps for 2023 DPISA features
  arm64/ptrace: Expose FPMR via ptrace
  arm64/signal: Add FPMR signal handling
  arm64/fpsimd: Support FEAT_FPMR
  arm64/fpsimd: Enable host kernel access to FPMR
  arm64/cpufeature: Hook new identification registers up to cpufeature
  docs: perf: Fix build warning of hisi-pcie-pmu.rst
  perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
  MAINTAINERS: Add entry for StarFive StarLink PMU
  docs: perf: Add description for StarFive's StarLink PMU
  dt-bindings: perf: starfive: Add JH8100 StarLink PMU
  perf: starfive: Add StarLink PMU support
  docs: perf: Update usage for target filter of hisi-pcie-pmu
  ...

Pull sound updates from Takashi Iwai:
 "This was a relatively calm development cycle. Most of changes are
  rather small device-specific fixes and enhancements. The only
  significant changes in ALSA core are code refactoring with the recent
  cleanup infrastructure, which should bring no functionality changes.
  Some highlights below:

  Core:
   - Lots of cleanups in ALSA core code with automatic kfree cleanup and
     locking guard macros
   - New ALSA core kunit test

  ASoC:
   - SoundWire support for AMD ACP 6.3 systems
   - Support for reporting version information for AVS firmware
   - Support DSPless mode for Intel Soundwire systems
   - Support for configuring CS35L56 amplifiers using EFI calibration
     data
   - Log which component is being operated on as part of power
     management trace events.
   - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

  HD- and USB-audio:
   - More Cirrus HD-audio codec support
   - TAS2781 HD-audio codec fixes
   - Scarlett2 mixer fixes

  Others:
   - Enhancement of virtio driver for audio control supports
   - Cleanups of legacy PM code with new macros
   - Firewire sound updates"

* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
  ALSA: usb-audio: Stop parsing channels bits when all channels are found.
  ALSA: hda/tas2781: remove unnecessary runtime_pm calls
  ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
  ALSA: aaci: Delete unused variable in aaci_do_suspend
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
  ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
  ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
  ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
  ALSA: hda/tas2781: restore power state after system_resume
  ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
  ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
  ALSA: hda/tas2781: add lock to system_suspend
  ALSA: hda/tas2781: use dev_dbg in system_resume
  ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
  platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
  ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: cs35l56: Add support for CS35L54 and CS35L57
  ASoC: Intel: catpt: Carefully use PCI bitwise constants
  ALSA: hda: hda_component: Include sound/hda_codec.h
  ALSA: hda: hda_component: Add missing #include guards
  ...

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate interrupt related code in irq.c (Ilpo Järvinen)

   - Reduce kernel size by replacing sysfs resource macros with
     functions (Ilpo Järvinen)

   - Reduce kernel size by compiling sysfs support only when
     CONFIG_SYSFS=y (Lukas Wunner)

   - Avoid using Extended Tags on 3ware-9650SE Root Port to work around
     an apparent hardware defect (Jörg Wedekind)

  Resource management:

   - Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)

   - Move pci_iomap.c and other PCI-specific devres code to drivers/pci
     (Philipp Stanner)

   - Consolidate PCI devres code in devres.c (Philipp Stanner)

  Power management:

   - Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
     know how to return correctly to D0, and remove previous quirk that
     wasn't as specific (Daniel Drake)

   - Allow runtime PM when the driver enables it but doesn't need any
     runtime PM callbacks (Raag Jadav)

   - Drain runtime-idle callbacks before driver removal to avoid races
     between .remove() and .runtime_idle(), which caused intermittent
     page faults when the rtsx .runtime_idle() accessed registers that
     its .remove() had already unmapped (Rafael J. Wysocki)

  Virtualization:

   - Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
     with VFIO, e.g., for professional audio software on many Apple
     machines, at the cost of leaking state between VMs (Edmund Raile)

  Error handling:

   - Print all logged TLP Prefixes, not just the first, after AER or DPC
     errors (Ilpo Järvinen)

   - Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
     still don't advertise a legal size (Paul Menzel)

   - Ignore expected DPC Surprise Down errors on hot removal (Smita
     Koralahalli)

   - Block runtime suspend while handling AER errors to avoid races that
     prevent the device form being resumed from D3hot (Stanislaw
     Gruszka)

  Peer-to-peer DMA:

   - Use atomic XA allocation in RCU read section (Christophe JAILLET)

  ASPM:

   - Collect bits of ASPM-related code that we need even without
     CONFIG_PCIEASPM into aspm.c (David E. Box)

   - Save/restore L1 PM Substates config for suspend/resume (David E.
     Box)

   - Update save_save when ASPM config is changed, so a .slot_reset()
     during error recovery restores the changed config, not the
     .probe()-time config (Vidya Sagar)

  Endpoint framework:

   - Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)

   - Clean up endpoint BAR descriptions (Niklas Cassel)

   - Fix ntb_register_device() name leak in error path (Yang Yingliang)

   - Return actual error code for pci_vntb_probe() failure (Yang
     Yingliang)

  Broadcom STB PCIe controller driver:

   - Fix MDIO write polling, which previously never waited for
     completion (Jonathan Bell)

  Cadence PCIe endpoint driver:

   - Clear the ARI "Next Function Number" of last function (Jasko-EXT
     Wojciech)

  Freescale i.MX6 PCIe controller driver:

   - Simplify by replacing switch statements with function pointers for
     different hardware variants (Frank Li)

   - Simplify by using clk_bulk*() API (Frank Li)

   - Remove redundant DT clock and reg/reg-name details (Frank Li)

   - Add i.MX95 DT and driver support for both Root Complex and Endpoint
     mode (Frank Li)

  Microsoft Hyper-V host bridge driver:

   - Reduce memory usage by limiting ring buffer size to 16KB instead of
     4 pages (Michael Kelley)

  Qualcomm PCIe controller driver:

   - Add X1E80100 DT and driver support (Abel Vesa)

   - Add DT 'required-opps' for SoCs that require a minimum performance
     level (Johan Hovold)

   - Make DT 'msi-map-mask' optional, depending on how MSI interrupts
     are mapped (Johan Hovold)

   - Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
     configuration isn't tuned correctly for L0s (Johan Hovold)

   - Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
     separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
     SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
     Kozlowski)

   - Enable BDF to SID translation by disabling bypass mode (Manivannan
     Sadhasivam)

   - Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
     Sarkar)

  Synopsys DesignWare PCIe controller driver:

   - Allocate 64-bit MSI address if no 32-bit address is available (Ajay
     Agarwal)

   - Fix endpoint Resizable BAR to actually advertise the required 1MB
     size (Niklas Cassel)

  MicroSemi Switchtec management driver:

   - Release resources if the .probe() fails (Christophe JAILLET)

  Miscellaneous:

   - Make pcie_port_bus_type const (Ricardo B. Marliere)"

* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
  PCI/ASPM: Update save_state when configuration changes
  PCI/ASPM: Disable L1 before configuring L1 Substates
  PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
  PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
  PCI: hv: Fix ring buffer size calculation
  PCI: dwc: endpoint: Fix advertised resizable BAR size
  PCI: cadence: Clear the ARI Capability Next Function Number of the last function
  PCI: dwc: Strengthen the MSI address allocation logic
  PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
  PCI: qcom: Add X1E80100 PCIe support
  dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
  PCI: qcom: Enable BDF to SID translation properly
  PCI/AER: Generalize TLP Header Log reading
  PCI/AER: Use explicit register size for PCI_ERR_CAP
  PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
  dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
  dt-bindings: PCI: qcom: Allow 'required-opps'
  PCI/AER: Block runtime suspend when handling errors
  PCI/ASPM: Move pci_save_ltr_state() to aspm.c
  PCI/ASPM: Always build aspm.c
  ...

Merge tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Ilpo Järvinen:

 - New acer-wmi HW support

 - Support for new revision of amd/pmf heartbeat notify

 - Correctly handle asus-wmi HW without LEDs

 - fujitsu-laptop battery charge control support

 - Support for new hp-wmi thermal profiles

 - Support ideapad-laptop refresh rate key

 - Put intel/pmc AI accelerator (GNA) into D3 if it has no driver to
   allow entry into low-power modes, and temporarily removed Lunar Lake
   SSRAM support due to breaking FW changes causing probe fail (further
   breaking FW changes are still pending)

 - Report pmc/punit_atom devices that prevent reacing low power levels

 - Surface Fan speed function support

 - Support for more sperial keys and complete the list of models with
   non-standard fan registers in thinkpad_acpi

 - New DMI touchscreen HW support

 - Continued modernization efforts of wmi

 - Removal of obsoleted ledtrig-audio call and the related dependency

 - Debug & metrics interface improvements

 - Miscellaneous cleanups / fixes / improvements

* tag 'platform-drivers-x86-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (87 commits)
  platform/x86/intel/pmc: Improve PKGC residency counters debug
  platform/x86: asus-wmi: Consider device is absent when the read is ~0
  Documentation/x86/amd/hsmp: Updating urls
  platform/mellanox: mlxreg-hotplug: Remove redundant NULL-check
  platform/x86/amd/pmf: Update sps power thermals according to the platform-profiles
  platform/x86/amd/pmf: Add support to get sps default APTS index values
  platform/x86/amd/pmf: Add support to get APTS index numbers for static slider
  platform/x86/amd/pmf: Add support to notify sbios heart beat event
  platform/x86/amd/pmf: Add support to get sbios requests in PMF driver
  platform/x86/amd/pmf: Disable debugfs support for querying power thermals
  platform/x86/amd/pmf: Differentiate PMF ACPI versions
  x86/platform/atom: Check state of Punit managed devices on s2idle
  platform/x86: pmc_atom: Check state of PMC clocks on s2idle
  platform/x86: pmc_atom: Check state of PMC managed devices on s2idle
  platform/x86: pmc_atom: Annotate d3_sts register bit defines
  clk: x86: Move clk-pmc-atom register defines to include/linux/platform_data/x86/pmc_atom.h
  platform/x86: make fw_attr_class constant
  platform/x86/intel/tpmi: Change vsec offset to u64
  platform/x86: intel_scu_pcidrv: Remove unused intel-mid.h
  platform/x86: intel_scu_wdt: Remove unused intel-mid.h
  ...

Pull LED updates from Lee Jones:
 "Core Framework:
   - Introduce ExpressWire library

  New Drivers:
   - Add support for ON Semiconductor NCP5623 RGB LED Driver

  New Device Support:
   - Add support for PM660L to Qualcomm's LPG driver

  New Functionality:
   - Dynamically load modules required for the default-trigger
   - Add some support for suspend and resume
   - Allow LEDs to remain lit during suspend

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Add new led_match_default_trigger to avoid duplication
   - Add module alias' to aid auto-loading
   - Default to hw_control if no others are specified
   - De-bloat the supported link speed attribute lists
   - Remove superfluous code and simplify overall
   - Constify some variables

  Bug Fixes:
   - Prevent kernel panic when renaming the net interface
   - Fix Kconfig related build errors
   - Ensure mutexes are unlocked prior to destroying them
   - Provide clean-up between state changes to avoid invalid state
   - Fix some broken kernel-doc headers"

* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
  leds: ncp5623: Add MS suffix to time defines
  leds: Add NCP5623 multi-led driver
  dt-bindings: leds: Add NCP5623 multi-LED Controller
  leds: mlxreg: Drop an excess struct mlxreg_led_data member
  leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
  leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
  leds: Fix ifdef check for gpio_led_register_device()
  dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
  dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  leds: sgm3140: Add missing timer cleanup and flash gpio control
  leds: expresswire: Don't depend on NEW_LEDS
  Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  leds: aw2013: Unlock mutex before destroying it
  leds: qcom-lpg: Add QCOM_PBS dependency
  leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
  leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  leds: qcom-lpg: Add PM660L configuration and compatible
  leds: spi-byte: Use devm_led_classdev_register_ext()
  leds: pca963x: Add support for suspend and resume
  ...

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for Kinetic KTD2801 Backlight

  Fix-ups:
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Device Tree binding adaptions/conversions/creation
   - Use dev_err_probe() to clean-up error paths
   - Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations

  Bug Fixes:
   - Fix changes of NULL pointer dereference
   - Remedy a bunch of logic errors
   - Initialise (zero) Backlight properties data structures"

* tag 'backlight-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (32 commits)
  backlight: pandora_bl: Drop unneeded ENOMEM error message
  backlight: lm3630a_bl: Simplify probe return on gpio request error
  backlight: lm3630a_bl: Handle deferred probe
  backlight: as3711_bl: Handle deferred probe
  backlight: bd6107: Handle deferred probe
  backlight: l4f00242t03: Simplify with dev_err_probe()
  backlight: gpio: Simplify with dev_err_probe()
  backlight: lp8788: Fully initialize backlight_properties during probe
  backlight: lm3639: Fully initialize backlight_properties during probe
  backlight: da9052: Fully initialize backlight_properties during probe
  backlight: lm3630a: Use backlight_get_brightness helper in update_status
  backlight: lm3630a: Don't set bl->props.brightness in get_brightness
  backlight: lm3630a: Initialize backlight_properties on init
  backlight: mp3309c: Fully initialize backlight_properties during probe
  backlight: mp3309c: Utilise temporary variable for struct device
  backlight: mp3309c: Use dev_err_probe() instead of dev_err()
  backlight: mp3309c: Make use of device properties
  dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  backlight: hx8357: Utilise temporary variable for struct device
  backlight: hx8357: Make use of dev_err_probe()
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for Watchdog to ChromeOS Embedded Controller
   - Add support for GPIOs to ChromeOS Embedded Controller
   - Add supprt for Sound to MediaTek MT6357 CODEC

  New Functionality:
   - Add power-off functionality to Texas Instruments TWL series CODECs

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Trivial; spelling, whitespace, clean-ups, etc
   - Remove superfluous code and simplify overall
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use dev_err_probe() to clean-up error paths
   - Convert used cache type over to the Maple Tree in many instances
   - Constify a bunch of static structs
   - Refrain from over-riding resources provided via the firmware

  Bug Fixes:
   - Fix a clock related firmware bug on Dell XPS 9530 et al.
   - Repair incorrect IRQ designations
   - Increase buffer sizes to omit various snprintf compiler errors
   - Ensure errors are handled properly
   - Balance references and prevent resource leaks
   - Rectify Power Key interrupt processing
   - Fix Kconfig related build errors
   - Correct a bunch of register start-up default values"

* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
  mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
  mfd: cs42l43: Fix wrong register defaults
  mfd: mt6397-core: Register mt6357 sound codec
  dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
  dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
  dt-bindings: mfd: Convert atmel-flexcom to json-schema
  mfd: kempld-core: Don't replace resources provided by ACPI
  mfd: cros_ec_dev: Add GPIO device if feature present on EC
  dt-bindings: mfd: cros-ec: Add properties for GPIO controller
  mfd: twl: Select MFD_CORE
  mfd: core: Constify the struct device_type usage
  mfd: rk8xx-core: Fix interrupt processing order for power key button
  mfd: twl4030-power: Accept standard property for power controller
  mfd: twl-core: Add power off implementation for twl603x
  dt-bindings: mfd: ti,twl: Document system-power-controller
  mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
  mfd: syscon: Remove extern from function prototypes
  mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
  mfd: mc13xxx: Use bitfield helpers
  mfd: rc5t583: Convert to use maple tree register cache
  ...

Pull pin control updates from Linus Walleij:
 "No core changes this time around.

  New drivers:

   - New driver for Renesas R8A779H0 also known as R-Car V4M.

   - New driver for the Awinic AW9523/B I2C GPIO expander. I found this
     living out-of-tree in OpenWrt as an upstream attempt had stalled on
     the finishing line, so I picked it up and finished the job.

  Improvements:

   - The Nomadik pin control driver was for years re-used out of tree
     for the ST STA chips, and now the IP was re-used in a MIPS
     automotive SoC called MobilEyeq5, so it has been split in pin
     control and GPIO drivers so the latter can be reused by MobilEyeq5.
     (Along with a long list of cleanups)

   - A lot of overall cleanup and tidying up"

* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
  drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
  gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
  dt-bindings: pinctrl: qcom: update compatible name for match with driver
  pinctrl: aw9523: Make the driver tristate
  pinctrl: nomadik: fix dereference of error pointer
  gpio: nomadik: Back out some managed resources
  pinctrl: aw9523: Add proper terminator
  pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
  pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
  pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
  dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
  gpio: nomadik: Finish conversion to use firmware node APIs
  gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
  pinctrl: da9062: Add OF table
  dt-bindings: pinctrl: at91: add sam9x7
  pinctrl: ocelot: remove redundant assignment to variable ret
  gpio: nomadik: grab optional reset control and deassert it at probe
  gpio: nomadik: support mobileye,eyeq5-gpio
  gpio: nomadik: handle variadic GPIO count
  gpio: nomadik: support shared GPIO IRQs
  ...

Pull power supply and reset updates from Sebastian Reichel:
 "New features:
   - axp20x_usb_power: report USB type

  Cleanups:
   - convert lots of drivers to use devm_power_supply_register()
   - convert lots of reset drivers to use devm_register_sys_off_handler()
   - constify device_type and power_supply_class
   - axp20x_usb_power: use correct property to report input current limit
   - mm8013: correct handling of "not charging" status register
   - core: fix charge_behaviour formatting
   - minor fixes cleanups"

* tag 'for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (66 commits)
  power: supply: core: fix charge_behaviour formatting
  power: supply: core: ease special formatting implementations
  power: supply: mm8013: fix "not charging" detection
  power: supply: move power_supply_attr_groups definition back to sysfs
  power: supply: core: simplify power_supply_class_init
  power: supply: core: add power_supply_for_each_device()
  power: supply: core: make power_supply_class constant
  power: supply: bq2415x_charger: report online status
  power: supply: core: move power_supply_attr_group into #ifdef block
  power: supply: core: Fix power_supply_init_attrs() stub
  power: supply: bq27xxx: Report charge full state correctly
  power: reset: rmobile-reset: Make sysc_base2 local
  power: supply: core: constify the struct device_type usage
  power: supply: axp288_fuel_gauge: Deny ROCK Pi X
  power: reset: rmobile-reset: Map correct MMIO resource
  power: reset: xgene-reboot: Fix a NULL vs IS_ERR() test
  power: supply: axp288_fuel_gauge: Add STCK1A* Intel Compute Sticks to the deny-list
  power: reset: syscon-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  power: reset: syscon-poweroff: Move device data into a struct
  power: reset: restart-poweroff: Use devm_register_sys_off_handler(POWER_OFF)
  ...

Pull HSI updates from Sebastian Reichel:

 - fix kernel-doc warning

 - make hsi_bus_type const

[ And as always I had to remind myself about the acronyn, so to avoid
  that for others: "HSI" is High Speed Synchronous Serial Interface,
  because of course it is.     - Linus ]

* tag 'hsi-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: ssi_protocol: fix struct members kernel-doc warnings
  hsi: hsi_core: make hsi_bus_type const

Pull HID updates from Jiri Kosina:

 - support for the following Bluetooth devices from Samsung: Samsung
   wireless {Keyboard, GamePad, Action Mouse, Book Cover, Universal
   Keyboard, HOGP Keyboard} (Sandeep C S)

 - second version of code for applying proper quirk depending on
   firmware version for lenovo/cptkbd (Mikhail Khvainitski)

 - lenovo/cptkbd firmware-dependent quirk (Mikhail Khvainitski)

 - assorted fixes and optimizations for amd-sfh (Basavaraj Natikar)

 - dead code and dead data structures removal (Jiri Slaby, Jiapeng
   Chong)

* tag 'hid-for-linus-2024031301' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (25 commits)
  HID: amd_sfh: Set the AMD SFH driver to depend on x86
  HID: input: avoid polling stylus battery on Chromebook Pompom
  HID: amd_sfh: Extend MP2 register access to SFH
  HID: amd_sfh: Improve boot time when SFH is available
  HID: amd_sfh: Avoid disabling the interrupt
  HID: amd_sfh: Update HPD sensor structure elements
  HID: amd_sfh: Increase sensor command timeout
  HID: intel-ish-hid: ipc: Add Arrow Lake PCI device ID
  HID: nintendo: Remove some unused functions
  HID: hid-prodikeys: remove struct pk_device
  HID: hid-prodikeys: remove unused struct pcmidi_snd members
  HID: hid-multitouch: remove unused mt_application::dev_time
  HID: hid-lg3ff: remove unused struct lg3ff_device
  HID: protect hid_device::bpf by CONFIG_HID_BPF
  HID: wacom: remove unused hid_data::pressure
  HID: apple: remove unused members from struct apple_sc_backlight
  HID: wacom: Clean up use of struct->wacom_wac
  HID: samsung: Add Samsung wireless bookcover and universal keyboard support
  HID: samsung: Add Samsung wireless action mouse support
  HID: samsung: Add Samsung wireless gamepad support
  ...

Merge tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay

Pull auxdisplay updates from Andy Shevchenko:

 - New driver for GPIO based 7-segment LED display (Chris Packham)

 - New driver for Maxim MAX6958/6959 I²C 7-segment LED display
   controller

 - Refactor linedisp library to make the above happen

 - Update Holtek HT16k33 driver to follow the linedisp refactoring

 - Convert .remove to return void in platform drivers (Uwe Kleine-König)

 - Fix DT schemas (Krzysztof Kozlowski)

 - Refresh MAINTAINERS database

* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
  auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
  auxdisplay: hd44780: Convert to platform remove callback returning void
  auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
  auxdisplay: seg-led-gpio: Import linedisp namespace
  dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  auxdisplay: Add 7-segment LED display driver
  auxdisplay: Add driver for MAX695x 7-segment LED controllers
  dt-bindings: auxdisplay: Add Maxim MAX6958/6959
  auxdisplay: ht16k33: Drop struct ht16k33_seg
  auxdisplay: ht16k33: Switch to use line display character mapping
  auxdisplay: ht16k33: Define a few helper macros
  auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
  auxdisplay: ht16k33: Add default to switch-cases
  auxdisplay: linedisp: Allocate buffer for the string
  auxdisplay: linedisp: Add support for overriding character mapping
  auxdisplay: linedisp: Provide struct linedisp_ops for future extension
  auxdisplay: linedisp: Move exported symbols to a namespace
  auxdisplay: linedisp: Add missing header(s)
  auxdisplay: linedisp: Unshadow error codes in ->store()
  auxdisplay: linedisp: Use unique number for id
  ...

Fix a bug where nilfs_get_block() returns a successful status when
searching and inserting the specified block both fail inconsistently.  If
this inconsistent behavior is not due to a previously fixed bug, then an
unexpected race is occurring, so return a temporary error -EAGAIN instead.

This prevents callers such as __block_write_begin_int() from requesting a
read into a buffer that is not mapped, which would cause the BUG_ON check
for the BH_Mapped flag in submit_bh_wbc() to fail.

Link: https://lkml.kernel.org/r/20240313105827.5296-3-konishi.ryusuke@gmail.com
Fixes: 1f5abe7e ("nilfs2: replace BUG_ON and BUG calls triggerable from ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "nilfs2: fix kernel bug at submit_bh_wbc()".

This resolves a kernel BUG reported by syzbot.  Since there are two
flaws involved, I've made each one a separate patch.

The first patch alone resolves the syzbot-reported bug, but I think
both fixes should be sent to stable, so I've tagged them as such.


This patch (of 2):

Syzbot has reported a kernel bug in submit_bh_wbc() when writing file data
to a nilfs2 file system whose metadata is corrupted.

There are two flaws involved in this issue.

The first flaw is that when nilfs_get_block() locates a data block using
btree or direct mapping, if the disk address translation routine
nilfs_dat_translate() fails with internal code -ENOENT due to DAT metadata
corruption, it can be passed back to nilfs_get_block().  This causes
nilfs_get_block() to misidentify an existing block as non-existent,
causing both data block lookup and insertion to fail inconsistently.

The second flaw is that nilfs_get_block() returns a successful status in
this inconsistent state.  This causes the caller __block_write_begin_int()
or others to request a read even though the buffer is not mapped,
resulting in a BUG_ON check for the BH_Mapped flag in submit_bh_wbc()
failing.

This fixes the first issue by changing the return value to code -EINVAL
when a conversion using DAT fails with code -ENOENT, avoiding the
conflicting condition that leads to the kernel bug described above.  Here,
code -EINVAL indicates that metadata corruption was detected during the
block lookup, which will be properly handled as a file system error and
converted to -EIO when passing through the nilfs2 bmap layer.

Link: https://lkml.kernel.org/r/20240313105827.5296-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20240313105827.5296-2-konishi.ryusuke@gmail.com
Fixes: c3a7abf0 ("nilfs2: support contiguous lookup of blocks")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+cfed5b56649bddf80d6e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cfed5b56649bddf80d6eTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

For special files in S_IFBLK/S_IFCHR/S_IFIFO type, we already have
ocfs2_setattr and ocfs2_getattr enabled.  It's confusing for user space if
it can use setattr/getattr to control one attribute appointed but can not
list attributes using listxattr for above type files:

$ mknod /mnt/b b 0 0
$ setfattr -h -n trusted.name -v 0xbabe /mnt/b
$ getfattr -n trusted.name  /mnt/b
getfattr: Removing leading '/' from absolute path names
trusted.name=0sur4=

$ getfattr -m trusted  /mnt/b
$

Fix it by enabling ocfs2_listxattr for ocfs2_special_file_iops.  After the
commit, fstests/generic/062 will pass.

Link: https://lkml.kernel.org/r/20240312042908.8889-1-l@damenly.orgSigned-off-by: Su Yue <glass.su@suse.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.

Link: https://lkml.kernel.org/r/20240224135008.829878-1-chengming.zhou@linux.devSigned-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Passing a NULL buffer into the lsm_get_self_attr() syscall is a valid
way to quickly determine the minimum size of the buffer needed to for
the syscall to return all of the LSM attributes to the caller.
Unfortunately we/I broke that behavior in commit d7cf3412
("lsm: consolidate buffer size handling into lsm_fill_user_ctx()")
such that it returned an error to the caller; this patch restores the
original desired behavior of using the NULL buffer as a quick way to
correctly size the attribute buffer.

Cc: stable@vger.kernel.org
Fixes: d7cf3412 ("lsm: consolidate buffer size handling into lsm_fill_user_ctx()")
Signed-off-by: Paul Moore <paul@paul-moore.com>

Change the size parameters in lsm_list_modules(), lsm_set_self_attr()
and lsm_get_self_attr() from size_t to u32. This avoids the need to
have different interfaces for 32 and 64 bit systems.

Cc: stable@vger.kernel.org
Fixes: a04a1198 ("LSM: syscalls for current process attributes")
Fixes: ad4aff9e ("LSM: Create lsm_list_modules system call")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reported-and-reviewed-by: Dmitry V. Levin <ldv@strace.io>
[PM: subject and metadata tweaks, syscall.h fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>

Shrink this percpu object by one array element so that the object size
becomes exactly 512 bytes.  This will lead to more efficient memory use,
hopefully.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Currently, struct time_stats has the optional ability to quantize the
information that it collects.  This is /probably/ useful for callers who
want to see quantized information, but it more than doubles the size of
the structure from 224 bytes to 464.  For users who don't care about
that (e.g. upcoming xfs patches) and want to avoid wasting 240 bytes per
counter, split the two into separate pieces.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The only caller of this code (time_stats) always knows the weights and
whether or not any information has been collected.  Pass this
information into the mean and variance code so that it doesn't have to
store that information.  This reduces the structure size from 24 to 16
bytes, which shrinks each time_stats counter to 192 bytes from 208.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Filesystems can stay mounted for a very long time, so add some larger
units.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull drm updates from Dave Airlie:
 "Highlights are usual, more AMD IP blocks for future hw, i915/xe
  changes, Displayport tunnelling support for i915, msm YUV over DP
  changes, new tests for ttm, but its mostly a lot of stuff all over the
  place from lots of people.

  core:
   - EDID cleanups
   - scheduler error handling fixes
   - managed: add drmm_release_action() with tests
   - add ratelimited drm debug print
   - DPCD PSR early transport macro
   - DP tunneling and bandwidth allocation helpers
   - remove built-in edids
   - dp: Avoid AUX transfers on powered-down displays
   - dp: Add VSC SDP helpers

  cross drivers:
   - use new drm print helpers
   - switch to ->read_edid callback
   - gem: add stats for shared buffers plus updates to amdgpu, i915, xe

  syncobj:
   - fixes to waiting and sleeping

  ttm:
   - add tests
   - fix errno codes
   - simply busy-placement handling
   - fix page decryption

  media:
   - tc358743: fix v4l device registration

  video:
   - move all kernel parameters for video behind CONFIG_VIDEO

  sound:
   - remove <drm/drm_edid.h> include from header

  ci:
   - add tests for msm
   - fix apq8016 runner

  efifb:
   - use copy of global screen_info state

  vesafb:
   - use copy of global screen_info state

  simplefb:
   - fix logging

  bridge:
   - ite-6505: fix DP link-training bug
   - samsung-dsim: fix error checking in probe
   - samsung-dsim: add bsh-smm-s2/pro boards
   - tc358767: fix regmap usage
   - imx: add i.MX8MP HDMI PVI plus DT bindings
   - imx: add i.MX8MP HDMI TX plus DT bindings
   - sii902x: fix probing and unregistration
   - tc358767: limit pixel PLL input range
   - switch to new drm_bridge_read_edid() interface

  panel:
   - ltk050h3146w: error-handling fixes
   - panel-edp: support delay between power-on and enable; use put_sync
     in unprepare; support Mediatek MT8173 Chromebooks, BOE NV116WHM-N49
     V8.0, BOE NV122WUM-N41, CSO MNC207QS1-1 plus DT bindings
   - panel-lvds: support EDT ETML0700Z9NDHA plus DT bindings
   - panel-novatek: FRIDA FRD400B25025-A-CTK plus DT bindings
   - add BOE TH101MB31IG002-28A plus DT bindings
   - add EDT ETML1010G3DRA plus DT bindings
   - add Novatek NT36672E LCD DSI plus DT bindings
   - nt36523: support 120Hz timings, fix includes
   - simple: fix display timings on RK32FN48H
   - visionox-vtdr6130: fix initialization
   - add Powkiddy RGB10MAX3 plus DT bindings
   - st7703: support panel rotation plus DT bindings
   - add Himax HX83112A plus DT bindings
   - ltk500hd1829: add support for ltk101b4029w and admatec 9904370
   - simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

  panel-orientation-quirks:
   - GPD Win Mini

  amdgpu:
   - Validate DMABuf imports in compute VMs
   - Add RAS ACA framework
   - PSP 13 fixes
   - Misc code cleanups
   - Replay fixes
   - Atom interpretor PS, WS bounds checking
   - DML2 fixes
   - Audio fixes
   - DCN 3.5 Z state fixes
   - Remove deprecated ida_simple usage
   - UBSAN fixes
   - RAS fixes
   - Enable seq64 infrastructure
   - DC color block enablement
   - Documentation updates
   - DC documentation updates
   - DMCUB updates
   - ATHUB 4.1 support
   - LSDMA 7.0 support
   - JPEG DPG support
   - IH 7.0 support
   - HDP 7.0 support
   - VCN 5.0 support
   - SMU 13.0.6 updates
   - NBIO 7.11 updates
   - SDMA 6.1 updates
   - MMHUB 3.3 updates
   - DCN 3.5.1 support
   - NBIF 6.3.1 support
   - VPE 6.1.1 support

  amdkfd:
   - Validate DMABuf imports in compute VMs
   - SVM fixes
   - Trap handler updates and enhancements
   - Fix cache size reporting
   - Relocate the trap handler

  radeon:
   - Atom interpretor PS, WS bounds checking
   - Misc code cleanups

  xe:
   - new query for GuC submission version
   - Remove unused persistent exec_queues
   - Add vram frequency sysfs attributes
   - Add the flag XE_VM_BIND_FLAG_DUMPABLE
   - Drop pre-production workarounds
   - Drop kunit tests for unsupported platforms
   - Start pumbling SR-IOV support with memory based interrupts for VF
   - Allow to map BO in GGTT with PAT index corresponding to XE_CACHE_UC
     to work with memory based interrupts
   - Add GuC Doorbells Manager as prep work SR-IOV
   - Implement additional workarounds for xe2 and MTL
   - Program a few registers according to perfomance guide spec for Xe2
   - Fix remaining 32b build issues and enable it back
   - Fix build with CONFIG_DEBUG_FS=n
   - Fix warnings from GuC ABI headers
   - Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF
   - Release mmap mappings on rpm suspend
   - Disable mid-thread preemption when not properly supported by
     hardware
   - Fix xe_exec by reserving extra fence slot for CPU bind
   - Fix xe_exec with full long running exec queue
   - Canonicalize addresses where needed for Xe2 and add to devcoredum
   - Toggle USM support for Xe2
   - Only allow 1 ufence per exec / bind IOCTL
   - Add GuC firmware loading for Lunar Lake
   - Add XE_VMA_PTE_64K VMA flag

  i915:
   - Add more ADL-N PCI IDs
   - Enable fastboot also on older platforms
   - Early transport for panel replay and PSR
   - New ARL PCI IDs
   - DP TPS4 PHY test pattern support
   - Unify and improve VSC SDP for PSR and non-PSR cases
   - Refactor memory regions and improve debug logging
   - Rework global state serialization
   - Remove unused CDCLK divider fields
   - Unify HDCP connector logging format
   - Use display instead of graphics version in display code
   - Move VBT and opregion debugfs next to the implementation
   - Abstract opregion interface, use opaque type
   - MTL fixes
   - HPD handling fixes
   - Add GuC submission interface version query
   - Atomically invalidate userptr on mmu-notifier
   - Update handling of MMIO triggered reports
   - Don't make assumptions about intel_wakeref_t type
   - Extend driver code of Xe_LPG to Xe_LPG+
   - Add flex arrays to struct i915_syncmap
   - Allow for very slow HuC loading
   - DP tunneling and bandwidth allocation support

  msm:
   - Correct bindings for MSM8976 and SM8650 platforms
   - Start migration of MDP5 platforms to DPU driver
   - X1E80100 MDSS support
   - DPU:
      - Improve DSC allocation, fixing several important corner cases
      - Add support for SDM630/SDM660 platforms
      - Simplify dpu_encoder_phys_ops
      - Apply fixes targeting DSC support with a single DSC encoder
      - Apply fixes for HCTL_EN timing configuration
      - X1E80100 support
      - Add support for YUV420 over DP
   - GPU:
      - fix sc7180 UBWC config
      - fix a7xx LLC config
      - new gpu support: a305B, a750, a702
      - machine support: SM7150 (different power levels than other a618)
      - a7xx devcoredump support

  habanalabs:
   - configure IRQ affinity according to NUMA node
   - move HBM MMU page tables inside the HBM
   - improve device reset
   - check extended PCIe errors

  ivpu:
   - updates to firmware API
   - refactor BO allocation

  imx:
   - use devm_ functions during init

  hisilicon:
   - fix EDID includes

  mgag200:
   - improve ioremap usage
   - convert to struct drm_edid
   - Work around PCI write bursts

  nouveau:
   - disp: use kmemdup()
   - fix EDID includes
   - documentation fixes

  qaic:
   - fixes to BO handling
   - make use of DRM managed release
   - fix order of remove operations

  rockchip:
   - analogix_dp: get encoder port from DT
   - inno_hdmi: support HDMI for RK3128
   - lvds: error-handling fixes

  ssd130x:
   - support SSD133x plus DT bindings

  tegra:
   - fix error handling

  tilcdc:
   - make use of DRM managed release

  v3d:
   - show memory stats in debugfs
   - Support display MMU page size

  vc4:
   - fix error handling in plane prepare_fb
   - fix framebuffer test in plane helpers

  virtio:
   - add venus capset defines

  vkms:
   - fix OOB access when programming the LUT
   - Kconfig improvements

  vmwgfx:
   - unmap surface before changing plane state
   - fix memory leak in error handling
   - documentation fixes
   - list command SVGA_3D_CMD_DEFINE_GB_SURFACE_V4 as invalid
   - fix null-pointer deref in execbuf
   - refactor display-mode probing
   - fix fencing for creating cursor MOBs
   - fix cursor-memory lifetime

  xlnx:
   - fix live video input for ZynqMP DPSUB

  lima:
   - fix memory leak

  loongson:
   - fail if no VRAM present

  meson:
   - switch to new drm_bridge_read_edid() interface

  renesas:
   - add RZ/G2L DU support plus DT bindings

  mxsfb:
   - Use managed mode config

  sun4i:
   - HDMI: updates to atomic mode setting

  mediatek:
   - Add display driver for MT8188 VDOSYS1
   - DSI driver cleanups
   - Filter modes according to hardware capability
   - Fix a null pointer crash in mtk_drm_crtc_finish_page_flip

  etnaviv:
   - enhancements for NPU and MRT support"

* tag 'drm-next-2024-03-13' of https://gitlab.freedesktop.org/drm/kernel: (1420 commits)
  drm/amd/display: Removed redundant @ symbol to fix kernel-doc warnings in -next repo
  drm/amd/pm: wait for completion of the EnableGfxImu message
  drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.1
  drm/amdgpu: add smu 14.0.1 support
  drm/amdgpu: add VPE 6.1.1 discovery support
  drm/amdgpu/vpe: add VPE 6.1.1 support
  drm/amdgpu/vpe: don't emit cond exec command under collaborate mode
  drm/amdgpu/vpe: add collaborate mode support for VPE
  drm/amdgpu/vpe: add PRED_EXE and COLLAB_SYNC OPCODE
  drm/amdgpu/vpe: add multi instance VPE support
  drm/amdgpu/discovery: add nbif v6_3_1 ip block
  drm/amdgpu: Add nbif v6_3_1 ip block support
  drm/amdgpu: Add pcie v6_1_0 ip headers (v5)
  drm/amdgpu: Add nbif v6_3_1 ip headers (v5)
  arch/powerpc: Remove <linux/fb.h> from backlight code
  macintosh/via-pmu-backlight: Include <linux/backlight.h>
  fbdev/chipsfb: Include <linux/backlight.h>
  drm/etnaviv: Restore some id values
  drm/amdkfd: make kfd_class constant
  drm/amdgpu: add ring timeout information in devcoredump
  ...

prep work for lifting out of fs/bcachefs/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Now that we've got the errors_silent mechanism, we don't have to check
if the reconstruct_alloc option is set all over the place.

Also - users no longer have to explicitly select fsck and fix_errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>