Since ARM64_HARDEN_EL2_VECTORS is really a mitigation for Spectre-v3a,
rename it accordingly for consistency with the v2 and v4 mitigation.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-9-will@kernel.org

The EL2 vectors installed when a guest is running point at one of the
following configurations for a given CPU:

  - Straight at __kvm_hyp_vector
  - A trampoline containing an SMC sequence to mitigate Spectre-v2 and
    then a direct branch to __kvm_hyp_vector
  - A dynamically-allocated trampoline which has an indirect branch to
    __kvm_hyp_vector
  - A dynamically-allocated trampoline containing an SMC sequence to
    mitigate Spectre-v2 and then an indirect branch to __kvm_hyp_vector

The indirect branches mean that VA randomization at EL2 isn't trivially
bypassable using Spectre-v3a (where the vector base is readable by the
guest).

Rather than populate these vectors dynamically, configure everything
statically and use an enumerated type to identify the vector "slot"
corresponding to one of the configurations above. This both simplifies
the code, but also makes it much easier to implement at EL2 later on.
Signed-off-by: Will Deacon <will@kernel.org>
[maz: fixed double call to kvm_init_vector_slots() on nVHE]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-8-will@kernel.org

The hardened hyp vectors are not used on systems running with VHE or CPUs
without the ARM64_HARDEN_EL2_VECTORS capability.

Re-jig the checking logic slightly in kvm_patch_vector_branch() so that
it's a bit clearer what we're looking for. This is purely cosmetic.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-7-will@kernel.org

The BP hardening helpers are an integral part of the Spectre-v2
mitigation, so move them into asm/spectre.h and inline the
arm64_get_bp_hardening_data() function at the same time.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-6-will@kernel.org

Branch predictor hardening of the hyp vectors is partially driven by a
couple of global variables ('__kvm_bp_vect_base' and
'__kvm_harden_el2_vector_slot'). However, these are only used within a
single compilation unit, so internalise them there instead.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-5-will@kernel.org

kvm_get_hyp_vector() has only one caller, so move it out of kvm_mmu.h
and inline it into a new function, cpu_set_hyp_vector(), for setting
the vector.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-4-will@kernel.org

The bulk of the work in kvm_map_vector() is conditional on the
ARM64_HARDEN_EL2_VECTORS capability, so return early if that is not set
and make the code a bit easier to read.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-3-will@kernel.org

'__kvm_bp_vect_base' is only used when dealing with the hardened vectors
so remove the redundant assignments in kvm_map_vectors().
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20201113113847.21619-2-will@kernel.org

Merge tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core documentation fixes from Greg KH:
 "Some small Documentation fixes that were fallout from the larger
  documentation update we did in 5.10-rc2.

  Nothing major here at all, but all of these have been in linux-next
  and resolve build warnings when building the documentation files"

* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: remove mic/index from misc-devices/index.rst
  scripts: get_api.pl: Add sub-titles to ABI output
  scripts: get_abi.pl: Don't let ABI files to create subtitles
  docs: leds: index.rst: add a missing file
  docs: ABI: sysfs-class-net: fix a typo
  docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys

Pull tty/serial fixes from Greg KH:
 "Here are a small number of small tty and serial fixes for some
  reported problems for the tty core, vt code, and some serial drivers.

  They include fixes for:

   - a buggy and obsolete vt font ioctl removal

   - 8250_mtk serial baudrate runtime warnings

   - imx serial earlycon build configuration fix

   - txx9 serial driver error path cleanup issues

   - tty core fix in release_tty that can be triggered by trying to bind
     an invalid serial port name to a speakup console device

  Almost all of these have been in linux-next without any problems, the
  only one that hasn't, just deletes code :)"

* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Disable KD_FONT_OP_COPY
  tty: fix crash in release_tty if tty->port is not set
  serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
  tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
  serial: 8250_mtk: Fix uart_get_baud_rate warning

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and new device ids:

   - USB gadget fixes for some reported issues

   - Fixes for the ever-troublesome apple fastcharge driver, hopefully
     we finally have it right.

   - More USB core quirks for odd devices

   - USB serial driver fixes for some long-standing issues that were
     recently found

   - some new USB serial driver device ids

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
  usb: mtu3: fix panic in mtu3_gadget_stop()
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: Add NO_LPM quirk for Kingston flash drive
  USB: serial: option: add Quectel EC200T module support
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.

Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

	/* copy font from active VT, where the font was uploaded to */
	cfo.op = KD_FONT_OP_COPY;
	cfo.height = vcs.v_active-1; /* tty1 == index 0 */
	(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.chSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull xfs fixes from Darrick Wong:

 - Fix an uninitialized struct problem

 - Fix an iomap problem zeroing unwritten EOF blocks

 - Fix some clumsy error handling when writeback fails on filesystems
   with blocksize < pagesize

 - Fix a retry loop not resetting loop variables properly

 - Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
   actually does permit that combination

 - Fix excessive page cache flushing when unsharing part of a file

* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: only flush the unshared range in xfs_reflink_unshare
  xfs: fix scrub flagging rtinherit even if there is no rt device
  xfs: fix missing CoW blocks writeback conversion retry
  iomap: clean up writeback state logic on writepage error
  iomap: support partial page discard on writeback block mapping failure
  xfs: flush new eof page on truncate to avoid post-eof corruption
  xfs: set xefi_discard when creating a deferred agfl free log intent item

Merge procfs splice read fixes from Christoph Hellwig:
 "Greg reported a problem due to the fact that Android tests use procfs
  files to test splice, which stopped working with the changes for
  set_fs() removal.

  This series adds read_iter support for seq_file, and uses those for
  various proc files using seq_file to restore splice read support"

[ Side note: Christoph initially had a scripted "move everything over"
  patch, which looks fine, but I personally would prefer us to actively
  discourage splice() on random files.  So this does just the minimal
  basic core set of proc file op conversions.

  For completeness, and in case people care, that script was

     sed -i -e 's/\.proc_read\(\s*=\s*\)seq_read/\.proc_read_iter\1seq_read_iter/g'

  but I'll wait and see if somebody has a strong argument for using
  splice on random small /proc files before I'd run it on the whole
  kernel.   - Linus ]

* emailed patches from Christoph Hellwig <hch@lst.de>:
  proc "seq files": switch to ->read_iter
  proc "single files": switch to ->read_iter
  proc/stat: switch to ->read_iter
  proc/cpuinfo: switch to ->read_iter
  proc: wire up generic_file_splice_read for iter ops
  seq_file: add seq_read_iter

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Use SYM_FUNC_START_WEAK in the mem* ASM functions instead of a
     combination of .weak and SYM_FUNC_START_LOCAL which makes LLVMs
     integrated assembler upset

   - Correct the mitigation selection logic which prevented the related
     prctl to work correctly

   - Make the UV5 hubless system work correctly by fixing up the
     malformed table entries and adding the missing ones"

* tag 'x86-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Recognize UV5 hubless system identifier
  x86/platform/uv: Remove spaces from OEM IDs
  x86/platform/uv: Fix missing OEM_TABLE_ID
  x86/speculation: Allow IBPB to be conditionally enabled on CPUs with always-on STIBP
  x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.S

Pull perf fix from Thomas Gleixner:
 "A single fix for the perf core plugging a memory leak in the address
  filter parser"

* tag 'perf-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix a memory leak in perf_event_parse_addr_filter()

Pull futex fix from Thomas Gleixner:
 "A single fix for the futex code where an intermediate state in the
  underlying RT mutex was not handled correctly and triggering a BUG()
  instead of treating it as another variant of retry condition"

* tag 'locking-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Handle transient "ownerless" rtmutex state correctly

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Fix the fallout of the IPI as interrupt conversion in Kconfig and
     the BCM2836 interrupt chip driver

   - Fixes for interrupt affinity setting and the handling of
     hierarchical irq domains in the SiFive PLIC driver

   - Make the unmapped event handling in the TI SCI driver work
     correctly

   - A few minor fixes and cleanups in various chip drivers and Kconfig"

* tag 'irq-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  dt-bindings: irqchip: ti, sci-inta: Fix diagram indentation for unmapped events
  irqchip/ti-sci-inta: Add support for unmapped event handling
  dt-bindings: irqchip: ti, sci-inta: Update for unmapped event handling
  irqchip/renesas-intc-irqpin: Merge irlm_bit and needs_irlm
  irqchip/sifive-plic: Fix chip_data access within a hierarchy
  irqchip/sifive-plic: Fix broken irq_set_affinity() callback
  irqchip/stm32-exti: Add all LP timer exti direct events support
  irqchip/bcm2836: Fix missing __init annotation
  irqchip/mips: Drop selection of IRQ_DOMAIN_HIERARCHY
  irqchip/mst: Make mst_intc_of_init static
  irqchip/mst: MST_IRQ should depend on ARCH_MEDIATEK or ARCH_MSTARV7
  genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHY

Pull entry code fix from Thomas Gleixner:
 "A single fix for the generic entry code to correct the wrong
  assumption that the lockdep interrupt state needs not to be
  established before calling the RCU check"

* tag 'core-urgent-2020-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry: Fix the incorrect ordering of lockdep and RCU check

Pull powerpc fixes from Michael Ellerman:

 - fix miscompilation with GCC 4.9 by using asm_goto_volatile for put_user()

 - fix for an RCU splat at boot caused by a recent lockdep change

 - fix for a possible deadlock in our EEH debugfs code

 - several fixes for handling of _PAGE_ACCESSED on 32-bit platforms

 - build fix when CONFIG_NUMA=n

Thanks to Andreas Schwab, Christophe Leroy, Oliver O'Halloran, Qian Cai,
and Scott Cheloha.

* tag 'powerpc-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/numa: Fix build when CONFIG_NUMA=n
  powerpc/8xx: Manage _PAGE_ACCESSED through APG bits in L1 entry
  powerpc/8xx: Always fault when _PAGE_ACCESSED is not set
  powerpc/40x: Always fault when _PAGE_ACCESSED is not set
  powerpc/603: Always fault when _PAGE_ACCESSED is not set
  powerpc: Use asm_goto_volatile for put_user()
  powerpc/smp: Call rcu_cpu_starting() earlier
  powerpc/eeh_cache: Fix a possible debugfs deadlock

Pull block fixes from Jens Axboe:

 - NVMe pull request from Christoph:
    - revert a nvme_queue size optimization (Keith Bush)
    - fabrics timeout races fixes (Chao Leng and Sagi Grimberg)"

 - null_blk zone locking fix (Damien)

* tag 'block-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  null_blk: Fix scheduling in atomic with zoned mode
  nvme-tcp: avoid repeated request completion
  nvme-rdma: avoid repeated request completion
  nvme-tcp: avoid race between time out and tear down
  nvme-rdma: avoid race between time out and tear down
  nvme: introduce nvme_sync_io_queues
  Revert "nvme-pci: remove last_sq_tail"

Pull io_uring fixes from Jens Axboe:
 "A set of fixes for io_uring:

   - SQPOLL cancelation fixes

   - Two fixes for the io_identity COW

   - Cancelation overflow fix (Pavel)

   - Drain request cancelation fix (Pavel)

   - Link timeout race fix (Pavel)"

* tag 'io_uring-5.10-2020-11-07' of git://git.kernel.dk/linux-block:
  io_uring: fix link lookup racing with link timeout
  io_uring: use correct pointer for io_uring_show_cred()
  io_uring: don't forget to task-cancel drained reqs
  io_uring: fix overflowed cancel w/ linked ->files
  io_uring: drop req/tctx io_identity separately
  io_uring: ensure consistent view of original task ->mm from SQPOLL
  io_uring: properly handle SQPOLL request cancelations
  io-wq: cancel request if it's asking for files and we don't have them

Gratian managed to trigger the BUG_ON(!newowner) in fixup_pi_state_owner().
This is one possible chain of events leading to this:

Task Prio       Operation
T1   120	lock(F)
T2   120	lock(F)   -> blocks (top waiter)
T3   50 (RT)	lock(F)   -> boosts T1 and blocks (new top waiter)
XX   		timeout/  -> wakes T2
		signal
T1   50		unlock(F) -> wakes T3 (rtmutex->owner == NULL, waiter bit is set)
T2   120	cleanup   -> try_to_take_mutex() fails because T3 is the top waiter
     			     and the lower priority T2 cannot steal the lock.
     			  -> fixup_pi_state_owner() sees newowner == NULL -> BUG_ON()

The comment states that this is invalid and rt_mutex_real_owner() must
return a non NULL owner when the trylock failed, but in case of a queued
and woken up waiter rt_mutex_real_owner() == NULL is a valid transient
state. The higher priority waiter has simply not yet managed to take over
the rtmutex.

The BUG_ON() is therefore wrong and this is just another retry condition in
fixup_pi_state_owner().

Drop the locks, so that T3 can make progress, and then try the fixup again.

Gratian provided a great analysis, traces and a reproducer. The analysis is
to the point, but it confused the hell out of that tglx dude who had to
page in all the futex horrors again. Condensed version is above.

[ tglx: Wrote comment and changelog ]

Fixes: c1e2f0ea ("futex: Avoid violating the 10th rule of futex")
Reported-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87a6w6x7bb.fsf@ni.com
Link: https://lore.kernel.org/r/87sg9pkvf7.fsf@nanos.tec.linutronix.de

Pull i2c fixes from Wolfram Sang:
 "Driver bugfixes for I2C.

  Most of them are for the new mlxbf driver which got more exposure
  after rc1. The sh_mobile patch should already have reached you during
  the merge window, but I accidently dropped it. However, since it fixes
  a problem with rebooting, it is still fine for rc3"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: slave should do WRITE_REQUESTED before WRITE_RECEIVED
  i2c: designware: call i2c_dw_read_clear_intrbits_slave() once
  i2c: mlxbf: I2C_MLXBF should depend on MELLANOX_PLATFORM
  i2c: mlxbf: Update author and maintainer email info
  i2c: mlxbf: Update reference clock frequency
  i2c: mlxbf: Remove unecessary wrapper functions
  i2c: mlxbf: Fix resrticted cast warning of sparse
  i2c: mlxbf: Add CONFIG_ACPI to guard ACPI function call
  i2c: sh_mobile: implement atomic transfers
  i2c: mediatek: move dma reset before i2c reset

Pull RISC-V fixes from Palmer Dabbelt:

 - SPDX comment style fix

 - ignore memory that is unusable

 - avoid setting a kernel text offset for the !MMU kernels, where
   skipping the first page of memory is both unnecessary and costly

 - avoid passing the flag bits in satp to pfn_to_virt()

 - fix __put_kernel_nofault, where we had the arguments to
   __put_user_nocheck reversed

 - workaround for a bug in the FU540 to avoid triggering PMP issues
   during early boot

 - change to how we pull symbols out of the vDSO. The old mechanism was
   removed from binutils-2.35 (and has been backported to Debian's 2.34)

* tag 'riscv-for-linus-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix the VDSO symbol generaton for binutils-2.35+
  RISC-V: Use non-PGD mappings for early DTB access
  riscv: uaccess: fix __put_kernel_nofault()
  riscv: fix pfn_to_virt err in do_page_fault().
  riscv: Set text_offset correctly for M-Mode
  RISC-V: Remove any memblock representing unusable memory area
  risc-v: kernel: ftrace: Fixes improper SPDX comment style

Merge tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.10-rc3

Here's a fix for a long-standing issue with the cyberjack driver and
some new device ids.

All have been in linux-next with no reported issues.

* tag 'usb-serial-5.10-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: serial: option: add Quectel EC200T module support

As shown through runtime testing, the "filename" allocation is not
always freed in perf_event_parse_addr_filter().

There are three possible ways that this could happen:

 - It could be allocated twice on subsequent iterations through the loop,
 - or leaked on the success path,
 - or on the failure path.

Clean up the code flow to make it obvious that 'filename' is always
freed in the reallocation path and in the two return paths as well.

We rely on the fact that kfree(NULL) is NOP and filename is initialized
with NULL.

This fixes the leak. No other side effects expected.

[ Dan Carpenter: cleaned up the code flow & added a changelog. ]
[ Ingo Molnar: updated the changelog some more. ]

Fixes: 375637bc ("perf/core: Introduce address range filtering")
Signed-off-by: "kiyin(尹亮)" <kiyin@tencent.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "Srivatsa S. Bhat" <srivatsa@csail.mit.edu>
Cc: Anthony Liguori <aliguori@amazon.com>
--
 kernel/events/core.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

Testing shows a problem in that UV5 hubless systems were not being
recognized.  Add them to the list of OEM IDs checked.

Fixes: 6c779442 ("Add UV5 direct references")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-4-mike.travis@hpe.com

Testing shows that trailing spaces caused problems with the OEM_ID and
the OEM_TABLE_ID.  One being that the OEM_ID would not string compare
correctly.  Another the OEM_ID and OEM_TABLE_ID would be concatenated
in the printout.  Remove any trailing spaces.

Fixes: 1e61f5a9 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-3-mike.travis@hpe.com

Testing shows a problem in that the OEM_TABLE_ID was missing for
hubless systems.  This is used to determine the APIC type (legacy or
extended).  Add the OEM_TABLE_ID to the early hubless processing.

Fixes: 1e61f5a9 ("Add and decode Arch Type in UVsystab")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201105222741.157029-2-mike.travis@hpe.com

Pull ceph fix from Ilya Dryomov:
 "A fix for a potential stall on umount caused by the MDS dropping our
  REQUEST_CLOSE message. The code that handled this case was
  inadvertently disabled in 5.9, this patch removes it entirely and
  fixes the problem in a way that is consistent with ceph-fuse"

* tag 'ceph-for-5.10-rc3' of git://github.com/ceph/ceph-client:
  ceph: check session state after bumping session->s_seq

Merge tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Fixes to the ftrace test and several fixes from Tommi Rantala for
  various other tests"

* tag 'linux-kselftest-fixes-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: binderfs: use SKIP instead of XFAIL
  selftests: clone3: use SKIP instead of XFAIL
  selftests: core: use SKIP instead of XFAIL in close_range_test.c
  selftests: proc: fix warning: _GNU_SOURCE redefined
  selftests: pidfd: drop needless linux/kcmp.h inclusion in pidfd_setns_test.c
  selftests: pidfd: add CONFIG_CHECKPOINT_RESTORE=y to config
  selftests: pidfd: skip test on kcmp() ENOSYS
  selftests: pidfd: use ksft_test_result_skip() when skipping test
  selftests/harness: prettify SKIP message whitespace again
  selftests: pidfd: fix compilation errors due to wait.h
  selftests: filter kselftest headers from command in lib.mk
  selftests/ftrace: check for do_sys_openat2 in user-memory test
  selftests/ftrace: Use $FUNCTION_FORK to reference kernel fork function

Pull SCSI fixes from James Bottomley:
 "Three driver fixes. Two (alua and hpsa) are in hard to trigger
  attach/detach situations but the mp3sas one involves a polled to
  interrupt switch over that could trigger in any high IOPS situation"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mpt3sas: Fix timeouts observed while reenabling IRQ
  scsi: scsi_dh_alua: Avoid crash during alua_bus_detach()
  scsi: hpsa: Fix memory leak in hpsa_init_one()

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: stm32_fmc2: fix broken ECC
  mtd: spi-nor: Fix address width on flash chips > 16MB
  mtd: spi-nor: Don't copy self-pointing struct around
  mtd: rawnand: ifc: Move the ECC engine initialization to the right place
  mtd: rawnand: mxc: Move the ECC engine initialization to the right place

Pull spi fix from Mark Brown:
 "This is an additional fix on top of 5e31ba0c ('spi: bcm2835: fix
  gpio cs level inversion') - when sending my prior pull request I had
  misremembred the status of that patch, apologies for the noise here"

* tag 'spi-fix-v5.10-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm2835: remove use of uninitialized gpio flags variable

Pull sound fixes from Takashi Iwai:
 "Quite a bunch of small fixes that have been gathered since the last
  pull, including changes like below:

   - HD-audio runtime PM fixes and refactoring

   - HD-audio and USB-audio quirks

   - SOF warning fix

   - Various ASoC device-specific fixes for Intel, Qualcomm, etc"

* tag 'sound-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
  ALSA: usb-audio: Add implicit feedback quirk for Qu-16
  ASoC: mchp-spdiftx: Do not set Validity bit(s)
  ALSA: usb-audio: Add implicit feedback quirk for MODX
  ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devices
  ALSA: hda/realtek - Enable headphone for ASUS TM420
  ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()
  ASoC: qcom: lpass-cpu: Fix clock disable failure
  ASoC: qcom: lpass-sc7180: Fix MI2S bitwidth field bit positions
  ASoC: codecs: wcd9335: Set digital gain range correctly
  ASoC: codecs: wcd934x: Set digital gain range correctly
  ALSA: hda: Reinstate runtime_allow() for all hda controllers
  ALSA: hda: Separate runtime and system suspend
  ALSA: hda: Refactor codec PM to use direct-complete optimization
  ALSA: hda/realtek - Fixed HP headset Mic can't be detected
  ALSA: usb-audio: Add implicit feedback quirk for Zoom UAC-2
  ALSA: make snd_kcontrol_new name a normal string
  ALSA: fix kernel-doc markups
  ASoC: SOF: loader: handle all SOF_IPC_EXT types
  ASoC: cs42l51: manage mclk shutdown delay
  ASoC: qcom: sdm845: set driver name correctly
  ...

Pull drm fixes from Dave Airlie:
 "It's Friday here so that means another installment of drm fixes to
  distract you from the counting process.

  Changes all over the place, the amdgpu changes contain support for a
  new GPU that is close to current one already in the tree (Green
  Sardine) so it shouldn't have much side effects.

  Otherwise imx has a few cleanup patches and fixes, amdgpu and i915
  have around the usual smattering of fixes, fonts got constified, and
  vc4/panfrost has some minor fixes. All in all a fairly regular rc3.

  We have an outstanding nouveau regression, but the author is looking
  into the fix, so should be here next week.

  I now return you to counting.

  fonts:
   - constify font structures.

  MAINTAINERS:
   - Fix path for amdgpu power management

  amdgpu:
   - Add support for more navi1x SKUs
   - Fix for suspend on CI dGPUs
   - VCN DPG fix for Picasso
   - Sienna Cichlid fixes
   - Polaris DPM fix
   - Add support for Green Sardine

  amdkfd:
   - Fix an allocation failure check

  i915:
   - Fix set domain's cache coherency
   - Fixes around breadcrumbs
   - Fix encoder lookup during PSR atomic
   - Hold onto an explicit ref to i915_vma_work.pinned
   - gvt: HWSP reset handling fix
   - gvt: flush workaround
   - gvt: vGPU context pin/unpin
   - gvt: mmio cmd access fix for bxt/apl

  imx:
   - drop unused functions and callbacks
   - reuse imx_drm_encoder_parse_of
   - spinlock rework
   - memory leak fix
   - minor cleanups

  vc4:
   - resource cleanup fix

  panfrost:
   - madvise/shrinker fix"

* tag 'drm-fixes-2020-11-06-1' of git://anongit.freedesktop.org/drm/drm: (55 commits)
  drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINE
  drm/amd/display: Add green_sardine support to DM
  drm/amd/display: Add green_sardine support to DC
  drm/amdgpu: enable vcn support for green_sardine (v2)
  drm/amdgpu: enable green_sardine_asd.bin loading (v2)
  drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)
  drm/amdgpu: add gfx support for green_sardine (v2)
  drm/amdgpu: add soc15 common ip block support for green_sardine (v3)
  drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)
  drm/amdgpu: add Green_Sardine APU flag
  drm/amdgpu: resolved ASD loading issue on sienna
  amdkfd: Check kvmalloc return before memcpy
  drm/amdgpu: update golden setting for sienna_cichlid
  amd/amdgpu: Disable VCN DPG mode for Picasso
  drm/amdgpu/swsmu: remove duplicate call to smu_set_default_dpm_table
  drm/i915: Hold onto an explicit ref to i915_vma_work.pinned
  drm/i915/gt: Flush xcs before tgl breadcrumbs
  drm/i915/gt: Expose more parameters for emitting writes into the ring
  drm/i915: Fix encoder lookup during PSR atomic check
  drm/i915/gt: Use the local HWSP offset during submission
  ...

Merge tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "Two critical tpm driver bug fixes"

* tag 'tpmdd-next-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm: efi: Don't create binary_bios_measurements file for an empty log
  tpm_tis: Disable interrupts on ThinkPad T490s