The ACCES 104-IDIO-16 device is part of the ACCES IDIO-16 family, so the
idio-16 GPIO library module is selected and utilized to consolidate
code.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Exposes consumer library functions to facilitate communication with
devices within the ACCES IDIO-16 family such as the 104-IDIO-16 and
the PCI-IDIO-16.

A CONFIG_GPIO_IDIO_16 Kconfig option is introduced by this patch.
Modules wanting access to these idio-16 library functions should select
this Kconfig option and import the GPIO_IDIO_16 symbol namespace.

Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Currently, we use just the fixed string "FTGPIO010" as the gpiochip name
for ftgpio010 drivers. Because it's fixed, this means we cannot
distinguish multiple ftgpio010 devices present on a single system.

This change uses the dev_name() instead, which should be unique between
multiple instances.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Existing DTS that use legacy (non-standard) property name for the reset
line "gpios-reset" also specify incorrect polarity (0 which maps to
"active high"). Add a quirk to force polarity to "active low" so that
once driver is converted to gpiod API that pays attention to line
polarity it will work properly.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Bindings for Freescale Fast Ethernet Controller use a separate
property "phy-reset-active-high" to specify polarity of its phy
gpio line. To allow converting the driver to gpiod API we need
to add this quirk to gpiolib.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

There are several instances where we use a separate property to
override polarity specified in gpio property. Factor it out into
a separate function.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The driver is using non-standard "gpio-rtc-data", "gpio-rtc-sclk", and
"gpio-rtc-reset" names for properties describing its gpios. In
preparation to converting to the standard naming ("rtc-*-gpios") and
switching the driver to gpiod API add a quirk to gpiolib to keep
compatibility with existing DTSes.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The controller is using non-standard "cirrus,gpio-nreset" name for its
reset gpio property, whereas gpiod API expects "<name>-gpios".
Add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The controller is using non-standard "reset-n-io" name for its reset
gpio property, whereas gpiod API expects "<name>-gpios". Add a quirk
so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Some legacy mappings used "gpio[s]-reset" instead of "reset-gpios",
add a quirk so that gpiod API will still work on unmodified DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Tighten selection of legacy gpio renaming quirks so that they only
considered on more relevant configurations.
Suggested-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

This consolidates all quirks doing simple renames (either allowing
suffix-less names or trivial renames, when index changes are not
required) into a single quirk.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The driver is using non-standard "i2s1-in-sel-gpio1" and
"i2s1-in-sel-gpio2" names to describe its gpios. In preparation to
converting to the standard naming (i2s1-in-sel-gpios) and switching the
driver to gpiod API add a quirk to gpiolib to keep compatibility with
existing DTSes.
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

CONFIG_ARCH_NR_GPIO is not used anymore, remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

ARCH_NR_GPIOS have been removed, clean up the documentation.

After this patch, the only place when ARCH_NR_GPIOS remains is in
translations/zh_CN/gpio.txt and translations/zh_TW/gpio.txt.
I don't have the skills to update that, anyway those two files are
already out of sync as they are still mentionning ARCH_REQUIRE_GPIOLIB
which was removed by commit 65053e1a ("gpio: delete
ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Since commit 14e85c0e ("gpio: remove gpio_descs global array")
there is no limitation on the number of GPIOs that can be allocated
in the system since the allocation is fully dynamic.

ARCH_NR_GPIOS is today only used in order to provide downwards
gpiobase allocation from that value, while static allocation is
performed upwards from 0. However that has the disadvantage of
limiting the number of GPIOs that can be registered in the system.

To overcome this limitation without requiring each and every
platform to provide its 'best-guess' maximum number, rework the
allocation to allocate upwards, allowing approx 2 millions of
GPIOs.

In order to still allow static allocation for legacy drivers, define
GPIO_DYNAMIC_BASE with the value 512 as the start for dynamic
allocation. The 512 value is chosen because it is the end of
the current default range so all current static allocations are
expected to be below that value. Of course that's just a rough
estimate based on the default value, but assuming static
allocations come first, even if there are more static allocations
it should fit under the 512 value.

In the future, it is expected that all static allocations go away
and then dynamic allocation will be patched to start at 0.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In the preparation of getting completely rid of static gpiobase
allocation in the future, emit a warning in drivers still doing so.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Since commit 14e85c0e ("gpio: remove gpio_descs global array")
there is no global limitation anymore on the number of GPIOs in
the system so don't clamp the number of GPIOs with ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

ARCH_NR_GPIOS is used locally in aggr_parse() as the maximum number
of GPIOs to be aggregated together by the driver since
commit ec75039d ("gpio: aggregator: Use bitmap_parselist() for
parsing GPIO offsets").

Don't rely on the total possible number of GPIOs in the system but
define a local arbitrary macro for that, set to 512 which should be
large enough as it is also the default value for ARCH_NR_GPIOS.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The Connext chip has 4 gpio cells looking very similar to those of the
Nomadik, whose gpio/pinctrl driver (already featuring devicetree support)
will be used instead of the sta2x11 specific one.
Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

All these drivers have an i2c probe function which doesn't use the
"struct i2c_device_id *id" parameter, so they can trivially be
converted to the "probe_new" style of probe with a single argument.

This is part of an ongoing transition to single-argument i2c probe
functions. Old-style probe functions involve a call to i2c_match_id:
in drivers/i2c/i2c-core-base.c,

         /*
          * When there are no more users of probe(),
          * rename probe_new to probe.
          */
         if (driver->probe_new)
                 status = driver->probe_new(client);
         else if (driver->probe)
                 status = driver->probe(client,
                                        i2c_match_id(driver->id_table, client));
         else
                 status = -EINVAL;

Drivers which don't need the second parameter can be declared using
probe_new instead, avoiding the call to i2c_match_id. Drivers which do
can still be converted to probe_new-style, calling i2c_match_id
themselves (as is done currently for of_match_id).

This change was done using the following Coccinelle script, and fixed
up for whitespace changes:

@ rule1 @
identifier fn;
identifier client, id;
@@

- static int fn(struct i2c_client *client, const struct i2c_device_id *id)
+ static int fn(struct i2c_client *client)
{
...when != id
}

@ rule2 depends on rule1 @
identifier rule1.fn;
identifier driver;
@@

struct i2c_driver driver = {
-       .probe
+       .probe_new
                =
(
                   fn
|
-                  &fn
+                  fn
)
                ,
};
Signed-off-by: Stephen Kitt <steve@sk2.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull more random number generator updates from Jason Donenfeld:
 "This time with some large scale treewide cleanups.

  The intent of this pull is to clean up the way callers fetch random
  integers. The current rules for doing this right are:

   - If you want a secure or an insecure random u64, use get_random_u64()

   - If you want a secure or an insecure random u32, use get_random_u32()

     The old function prandom_u32() has been deprecated for a while
     now and is just a wrapper around get_random_u32(). Same for
     get_random_int().

   - If you want a secure or an insecure random u16, use get_random_u16()

   - If you want a secure or an insecure random u8, use get_random_u8()

   - If you want secure or insecure random bytes, use get_random_bytes().

     The old function prandom_bytes() has been deprecated for a while
     now and has long been a wrapper around get_random_bytes()

   - If you want a non-uniform random u32, u16, or u8 bounded by a
     certain open interval maximum, use prandom_u32_max()

     I say "non-uniform", because it doesn't do any rejection sampling
     or divisions. Hence, it stays within the prandom_*() namespace, not
     the get_random_*() namespace.

     I'm currently investigating a "uniform" function for 6.2. We'll see
     what comes of that.

  By applying these rules uniformly, we get several benefits:

   - By using prandom_u32_max() with an upper-bound that the compiler
     can prove at compile-time is ≤65536 or ≤256, internally
     get_random_u16() or get_random_u8() is used, which wastes fewer
     batched random bytes, and hence has higher throughput.

   - By using prandom_u32_max() instead of %, when the upper-bound is
     not a constant, division is still avoided, because
     prandom_u32_max() uses a faster multiplication-based trick instead.

   - By using get_random_u16() or get_random_u8() in cases where the
     return value is intended to indeed be a u16 or a u8, we waste fewer
     batched random bytes, and hence have higher throughput.

  This series was originally done by hand while I was on an airplane
  without Internet. Later, Kees and I worked on retroactively figuring
  out what could be done with Coccinelle and what had to be done
  manually, and then we split things up based on that.

  So while this touches a lot of files, the actual amount of code that's
  hand fiddled is comfortably small"

* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  prandom: remove unused functions
  treewide: use get_random_bytes() when possible
  treewide: use get_random_u32() when possible
  treewide: use get_random_{u8,u16}() when possible, part 2
  treewide: use get_random_{u8,u16}() when possible, part 1
  treewide: use prandom_u32_max() when possible, part 2
  treewide: use prandom_u32_max() when possible, part 1

Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
   when using bperf (perf BPF based counters) with cgroups.

 - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
   monitors bandwidth, latency, bus utilization and buffer occupancy.

   Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.

 - User space tasks can migrate between CPUs, so when tracing selected
   CPUs, system-wide sideband is still needed, fix it in the setup of
   Intel PT on hybrid systems.

 - Fix metricgroups title message in 'perf list', it should state that
   the metrics groups are to be used with the '-M' option, not '-e'.

 - Sync the msr-index.h copy with the kernel sources, adding support for
   using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
   as decoding it when printing the MSR tracepoint arguments.

 - Fix program header size and alignment when generating a JIT ELF in
   'perf inject'.

 - Add multiple new Intel PT 'perf test' entries, including a jitdump
   one.

 - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
   running on PowerPC due to an invalid topology number in that arch.

 - Fix the 'perf test' for arm_coresight failures on the ARM Juno
   system.

 - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
   option to the or expression expected in the intercepted
   perf_event_open() syscall.

 - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
   'perf annotate' asm parser.

 - Fix 'perf mem record -C' option processing, it was being chopped up
   when preparing the underlying 'perf record -e mem-events' and thus
   being ignored, requiring using '-- -C CPUs' as a workaround.

 - Improvements and tidy ups for 'perf test' shell infra.

 - Fix Intel PT information printing segfault in uClibc, where a NULL
   format was being passed to fprintf.

* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
  perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
  perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
  perf tests stat+json_output: Include sanity check for topology
  perf tests stat+csv_output: Include sanity check for topology
  perf intel-pt: Fix system_wide dummy event for hybrid
  perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
  perf test: Fix attr tests for PERF_FORMAT_LOST
  perf test: test_intel_pt.sh: Add 9 tests
  perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
  perf test: test_intel_pt.sh: Add jitdump test
  perf test: test_intel_pt.sh: Tidy some alignment
  perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
  perf test: test_intel_pt.sh: Tidy some perf record options
  perf test: test_intel_pt.sh: Fix return checking again
  perf: Skip and warn on unknown format 'configN' attrs
  perf list: Fix metricgroups title message
  perf mem: Fix -C option behavior for perf mem record
  perf annotate: Add missing condition flags for arm64
  ...

Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
   combination of Clang >= 14 and GAS <= 2.35.

 - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
   the package size.

 - Fix modpost error under build environments using musl.

 - Make *.ll files keep value names for easier debugging

 - Fix single directory build

 - Prevent RISC-V from selecting the broken DWARF5 support when Clang
   and GAS are used together.

* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
  kbuild: fix single directory build
  kbuild: add -fno-discard-value-names to cmd_cc_ll_c
  scripts/clang-tools: Convert clang-tidy args to list
  modpost: put modpost options before argument
  kbuild: Stop including vmlinux.bz2 in the rpm's
  Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
  Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5

Pull more clk updates from Stephen Boyd:
 "This is the final part of the clk patches for this merge window.

  The clk rate range series needed another week to fully bake. Maxime
  fixed the bug that broke clk notifiers and prevented this from being
  included in the first pull request. He also added a unit test on top
  to make sure it doesn't break so easily again. The majority of the
  series fixes up how the clk_set_rate_*() APIs work, particularly
  around when the rate constraints are dropped and how they move around
  when reparenting clks. Overall it's a much needed improvement to the
  clk rate range APIs that used to be pretty broken if you looked
  sideways.

  Beyond the core changes there are a few driver fixes for a compilation
  issue or improper data causing clks to fail to register or have the
  wrong parents. These are good to get in before the first -rc so that
  the system actually boots on the affected devices"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
  clk: tegra: Fix Tegra PWM parent clock
  clk: at91: fix the build with binutils 2.27
  clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
  clk: mediatek: clk-mux: Add .determine_rate() callback
  clk: tests: Add tests for notifiers
  clk: Update req_rate on __clk_recalc_rates()
  clk: tests: Add missing test case for ranges
  clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
  clk: Introduce the clk_hw_get_rate_range function
  clk: Zero the clk_rate_request structure
  clk: Stop forwarding clk_rate_requests to the parent
  clk: Constify clk_has_parent()
  clk: Introduce clk_core_has_parent()
  clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
  clk: Add our request boundaries in clk_core_init_rate_req
  clk: Introduce clk_hw_init_rate_request()
  clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
  clk: Change clk_core_init_rate_req prototype
  clk: Set req_rate on reparenting
  clk: Take into account uncached clocks in clk_set_rate_range()
  ...

Pull more cifs updates from Steve French:

 - fix a regression in guest mounts to old servers

 - improvements to directory leasing (caching directory entries safely
   beyond the root directory)

 - symlink improvement (reducing roundtrips needed to process symlinks)

 - an lseek fix (to problem where some dir entries could be skipped)

 - improved ioctl for returning more detailed information on directory
   change notifications

 - clarify multichannel interface query warning

 - cleanup fix (for better aligning buffers using ALIGN and round_up)

 - a compounding fix

 - fix some uninitialized variable bugs found by Coverity and the kernel
   test robot

* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: improve SMB3 change notification support
  cifs: lease key is uninitialized in two additional functions when smb1
  cifs: lease key is uninitialized in smb1 paths
  smb3: must initialize two ACL struct fields to zero
  cifs: fix double-fault crash during ntlmssp
  cifs: fix static checker warning
  cifs: use ALIGN() and round_up() macros
  cifs: find and use the dentry for cached non-root directories also
  cifs: enable caching of directories for which a lease is held
  cifs: prevent copying past input buffer boundaries
  cifs: fix uninitialised var in smb2_compound_op()
  cifs: improve symlink handling for smb2+
  smb3: clarify multichannel warning
  cifs: fix regression in very old smb1 mounts
  cifs: fix skipping to incorrect offset in emit_cached_dirents

This reverts commit 78e5a339 ("cpumask: fix checking valid cpu range").

syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a339 ("cpumask: fix checking
valid cpu range") is broken.  Obviously that patch hits WARN_ON_ONCE()
when e.g.  reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.

Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately.  As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].

Andrew Jones proposed a fix for x86 and riscv architectures [4].  But
[2] and [5] indicate that affected locations are not limited to arch
code.  More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.

We should have inspected and fixed basically all cpumask users before
applying that patch.  We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.

Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:

  /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported

Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:

  .Ldebug_loc0:
          .byte   4                               # DW_LLE_offset_pair
          .uleb128 .Lfunc_begin0-.Lfunc_begin0    #   starting offset
          .uleb128 .Ltmp1-.Lfunc_begin0           #   ending offset
          .byte   1                               # Loc expr size
          .byte   90                              # DW_OP_reg10
          .byte   0                               # DW_LLE_end_of_list

  .Ldebug_ranges0:
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp6-.Lfunc_begin0           #   starting offset
          .uleb128 .Ltmp27-.Lfunc_begin0          #   ending offset
          .byte   4                               # DW_RLE_offset_pair
          .uleb128 .Ltmp28-.Lfunc_begin0          #   starting offset
          .uleb128 .Ltmp30-.Lfunc_begin0          #   ending offset
          .byte   0                               # DW_RLE_end_of_list

There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.

To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.

Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit f110e5a2 ("kbuild: refactor single builds of *.ko") was wrong.

KBUILD_MODULES _is_ needed for single builds.

Otherwise, "make foo/bar/baz/" does not build module objects at all.

Fixes: f110e5a2 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>

Pull slab hotfix from Vlastimil Babka:
 "A single fix for the common-kmalloc series, for warnings on mips and
  sparc64 reported by Guenter Roeck"

* tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation

Pull OpenRISC updates from Stafford Horne:
 "I have relocated to London so not much work from me while I get
  settled.

  Still, OpenRISC picked up two patches in this window:

   - Fix for kernel page table walking from Jann Horn

   - MAINTAINER entry cleanup from Palmer Dabbelt"

* tag 'for-linus' of https://github.com/openrisc/linux:
  MAINTAINERS: git://github -> https://github.com for openrisc
  openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached

Pull pci fix from Bjorn Helgaas:
 "Revert the attempt to distribute spare resources to unconfigured
  hotplug bridges at boot time.

  This fixed some dock hot-add scenarios, but Jonathan Cameron reported
  that it broke a topology with a multi-function device where one
  function was a Switch Upstream Port and the other was an Endpoint"

* tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Distribute available resources for root buses, too"

After commit d6a71648 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.

SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.

Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.

Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6a71648 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>

Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.

This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.

To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)

struct __attribute__((__packed__)) smb3_notify {
       uint32_t completion_filter;
       bool     watch_tree;
       uint32_t data_len;
       uint8_t  data[];
} __packed;

using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
 or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)

The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts.  It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).

Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>

It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).

Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>