- 01 Dec, 2020 22 commits
-
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
Add feature caps to allow way for driver to query what features FW supports Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Zhan Liu authored
[Why] DPCS related info needs to be properly defined within code. [How] Add missing DPCS related info to code. Signed-off-by:
Zhan Liu <zhan.liu@amd.com> Reviewed-by:
Nikola Cornij <nikola.cornij@amd.com> Acked-by:
-
Eryk Brol authored
[Why] Whenever DSC parameters are changed we need to perform full modeset to commit DSC changes to DC. [How] If dsc_force_changed is set, need to set mode_changed on new CRTC state Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Signed-off-by:
Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
-
Jacky Liao authored
[Why] The DSCL memory blocks should be powered down when they're not in use. This will reduce power consumption. [How] 1. Write to DSCL_MEM_PWR_FORCE to put memory to shutdown when DSCL is not used. 2. Added a debug option to allow this behaviour to be turned off Signed-off-by:
Jacky Liao <ziyu.liao@amd.com> Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
-
Brandon Syu authored
[Why] While booting into OS, driver updates DPP/DISP CLKs. But init clock value is zero which is invalid. [How] Get current clocks value to update init clocks. To avoid underflow. Signed-off-by:
Brandon Syu <Brandon.Syu@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Joshua Aberback authored
[Why] enable_link_dp_mst checks that cur_link_settings != unknown to determine that the link is already enabled, to skip redundant enablement calls for multiple streams on the same link. During dc_reinitialize_hardware, cur_link_settings on previously-active links is not cleared, which blocks MST links from being re-enabled after a reinitialization. [How] - check for link_status->link_active instead, as it's the real intent - clear cur_link_settings when we clear link_active Signed-off-by:
Joshua Aberback <joshua.aberback@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Sung Lee authored
[WHY] dram clock change latencies get updated using ddr4 latency table, but does that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
-
Jacky Liao authored
[Why] The HDR3DLUT and SHAPER memory blocks should be powered down when they're not in use. This will reduce power consumption. [How] 1. Write to HDR3DLUT_MEM_PWR_FORCE to put memory to shutdown when HDR3DLUT is not used. 2. Write to SHAPER_MEM_PWR_FORCE to put memory to shutdown when SHAPER is not used. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Eric Bernstein authored
This reverts commit 2208f39c. It caused a regression in internal FPGA tests. Signed-off-by:
Eric Bernstein <Eric.Bernstein@amd.com> Reviewed-by:
-
Marek Olšák authored
Same as Sienna Cichlid and Navy Flounder. Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Acked-by:
-
Aurabindo Pillai authored
[Why&How] Set dpms off on the connector that was unplugged, for the side effect of releasing some references held through deallocation of MST payload. This is the expected behaviour for non MST devices as well. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] Recent changes to upstream mst code remove the callback which cleared the internal state for mst. Move the missing functionality that was previously called through the destroy call back for mst connector destroy Signed-off-by:
-
Arunpravin authored
Fix fan set speed calculation. Suggested-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
Arunpravin <Arunpravin.PaneerSelvam@amd.com> Acked-by:
-
Jinzhou Su authored
If there are 2 gfx rings, the doorbell lower range of second ring will override the first ring. Signed-off-by:
Jinzhou.Su <Jinzhou.Su@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Tao Zhou authored
Update GC golden setting for dimgrey_cavefish. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Jiansong Chen <Jiansong.Chen@amd.com> Signed-off-by:
-
Jingwen Chen authored
power profile switch in vcn need to send SetWorkLoad msg to smu, which is not supported in sriov. Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Jiange Zhao <Jiange.Zhao@amd.com> Signed-off-by:
-
Jiansong Chen authored
It's in accordance with pmfw 65.18.0 for navy_flounder. Signed-off-by:
-
James Zhu authored
Fixed warning: no previous prototype. Signed-off-by:
James Zhu <James.Zhu@amd.com> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Likun Gao authored
4MB reserved VRAM size which used for page tables was not enough for some condition, increase it to 8MB to reduce page table contention. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Stanley.Yang authored
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta and asd fw in SRIOV for vega10, so adjust above fw and skip load them in SRIOV only for navi12. v2: remove unnecessary asic type check. Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Stanley.Yang authored
noretry = 0 casue KFDGraphicsInterop test failed on SRIOV platform for vega10, so set noretry to 1 for vega10. Signed-off-by:
-
- 24 Nov, 2020 18 commits
-
-
Colin Ian King authored
The struct name smu_state_memroy_block contains a spelling mistake, rename it to smu_state_memory_block Fixes: 8554e67d ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11") Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=] drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid' Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=] Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb' drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/dimgrey_cavefish_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:151:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:81:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 81 | static const struct IP_BASE FUSE_BASE = { { { { 0x00017400, 0x02401400, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/dimgrey_cavefish_ip_offset.h:74:29: warning: ‘DPCS_BASE’ defined but not used [-Wunused-const-variable=] 74 | static const struct IP_BASE DPCS_BASE = { { { { 0x00000012, 0x000000C0, 0x000034C0, 0x00009000, 0x02403C00, 0 } }, | ^~~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/vangogh_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:210:29: warning: ‘USB_BASE’ defined but not used [-Wunused-const-variable=] 210 | static const struct IP_BASE USB_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:202:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 202 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:178:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=] 178 | static const struct IP_BASE PCIE0_BASE = { { { { 0x00000000, 0x00000014, 0x00000D20, 0x00010400, 0x0241B000, 0x04040000 } }, | ^~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vangogh_ip_offset.h:154:29: warning: ‘MP2_BASE’ defined but not used [-Wunused-const-variable=] 154 | static const struct IP_BASE MP2_BASE = { { { { 0x00016400, 0x02400800, 0x00F40000, 0x00F80000, 0x00FC0000, 0 } }, | ^~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/sienna_cichlid_reg_init.c:28: drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:186:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 186 | static const struct IP_BASE USB0_BASE = { { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:179:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE UMC_BASE = { { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/sienna_cichlid_ip_offset.h:158:29: warning: ‘SDMA1_BASE’ defined but not used [-Wunused-const-variable=] 158 | static const struct IP_BASE SDMA1_BASE = { { { { 0x00001260, 0x0000A000, 0x0001C000, 0x02402C00, 0 } }, | ^~~~~~~~~~ NB: Snipped lots of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } }, | ^~~~~~~~~ NB: Snipped a few of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=] 179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=] 151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } }, | ^~~~~~~~~ NB: Snipped a few of these Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=] 227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } }, | ^~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=] 127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } }, | ^~~~~~~~~~ In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } }, | ^~~~~~~~~ Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): In file included from drivers/gpu/drm/amd/amdgpu/navi10_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:127:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=] 127 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0, 0, 0, 0, 0 } }, | ^~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:109:29: warning: ‘RSMU_BASE’ defined but not used [-Wunused-const-variable=] 109 | static const struct IP_BASE RSMU_BASE = { { { { 0x00012000, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/navi10_ip_offset.h:61:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 61 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ Acked-by: -
Lee Jones authored
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27: drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable= 154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=] 63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } }, | ^~~~~~~~~ Fixes the following W=1 kernel build warning(s): Acked-by: -
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip' drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand * Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini' drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini' Acked-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib' Acked-by:
-
