- 02 Apr, 2015 40 commits
-
-
David S. Miller authored
Or Gerlitz says: ==================== Mellanox mlx4 driver updates The main feature added by this series are Ido's changes to support Granular QoS for VFs, where for the time being only max rate is supported. Muhammad added support for setting rx-fcs and rx-all through ethtool, and Ido did the interface identify work. Last, add Ido as a maintainer for the mlx4 Ethernet driver! Some of next week is the Passover holiday here and I will be mostly OOO. If needed (...) Ido or Amir will send V1 and such. Rebased against net-next commit 033f46b3 "crypto: algif - explicitly mark end of data". ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Or Gerlitz authored
Add Ido Shamay as co-maintainer for the mlx4 Ethernet driver. Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Muhammad Mahajna authored
Enabled when the device supports KEEP FCS and IGNORE FCS. When the flag is set, pass all received frames up the stack, even ones with invalid FCS, controlled by ethtool. Signed-off-by:
Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
-
Muhammad Mahajna authored
Enabled when device supports KEEP FCS. When the flag is set, Ethernet FCS is appended to the end of the frame, controlled by ethtool. Signed-off-by:
-
Ido Shamay authored
Add support for the interface ethtool identify feature. Make the physical port LED to blink with green and yellow colors. The device handles the LED blink by itself (synchrous use of set_phys_id), by returning 0 to ETHTOOL_ID_ACTIVE command. Signed-off-by:
Eyal Grossman <eyalgr@mellanox.com> Signed-off-by:
-
Ido Shamay authored
The calls to SET_PORT used hard-code numbers, when supplying command's opcode modifiers, fix that to use well defined constants. Signed-off-by:
-
Ido Shamay authored
If HCA supports ETS QoS feature, set enhanced QoS bit in init_hca as default. Signed-off-by:
-
Ido Shamay authored
A new capability bit was introduced in the past to to differ devices using the QoS ETS feature. The old was deprecated since then. If driver sees device which set only the old capabilty, it will print warning to user suggesting to upgrade the FW. Signed-off-by:
-
Ido Shamay authored
Support granular QoS per VF, by implementing the ndo_set_vf_rate. Enforce a rate limit per VF when called, and enabled only for VFs in VST mode with user priority supported by the device. We don't enforce VFs to be in VST mode at the moment of configuration, but rather save the given rate limit and enforce it when the VF is moved to VST with user priority which is supported (currently 0). VST<->VGT or VST qos value state changes are disallowed when a rate limit is configured. Minimum BW share is not supported yet. Signed-off-by:
-
Ido Shamay authored
Granular QoS per VF feature introduce a new QP field, qos_vport. PF administrator can connect VF QPs to a certain QoS Vport, to inherit its proporties. Connecting QPs to the default QoS Vport (defined as 0) is always allowed, even when there are no allocated VPPs. At this point, only the default vport is connected to QPs. Signed-off-by:
-
Ido Shamay authored
Initialization of granular Qos per VF mechanism. Query the port availible VPPs and allocates those on all supported priorities in an equal share. Allocation is done only in SRIOV mode, when the feature is supported by the device and port type is Ethernet. Allocation currently is done only on the default priority 0. Signed-off-by:
-
Ido Shamay authored
Checks in QUERY_DEV_CAP if the granular QoS per VF feature is supported by the device. Disabled for guests. Signed-off-by:
-
Ido Shamay authored
Add the SET_VPORT_QOS device command, which is ntended for virtual granular QoS configuration per VF in SRIOV mode. The SET_VPORT_QOS command sets and queries QoS parameters of a VPort. Each priority allowed for a VPort is assigned with a share of the BW, and a BW limitation. QoS parameters can be modified at any time, but must be initialized before any QP is associated with the VPort. Signed-off-by:
-
Ido Shamay authored
Implements device ALLOCATE_VPP command, to be used for granular QoS configuration of VFs by the PF device. Defines and queries the amount of VPPs assigned to each port, and the amount of VPPs assigned to each priority of each port. Once the total VPPs are split between the priorities of a port, they may be assigned with a share of the BW or a rate limit. Split into two functions (get/set) whoch are supplied with mlx4_alloc_vpp_context and physical port number. Signed-off-by:
-
Ido Shamay authored
Create two new files fw_qos.h and fw_qos.c in mlx4_core module. It gathers all relevant QoS firmware related commands etc, thus improving encapsulation of the mlx4_core module. For now it contains the QoS existing commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC. Signed-off-by:
-
Ido Shamay authored
Previous vf_oper and vf_admin code created very long lines, making it hard to read the code. Added relevant in-struct pointers to reduce code complexity and avoid code lines spread over 80 lines. Same logic is preserved. Signed-off-by:
-
Ido Shamay authored
Currently implemented as static function in resource_tracker.c -- this change will allow other files in mlx4_core to use it as well. Signed-off-by:
-
Ido Shamay authored
Currently any change of netdev features results in a call to mlx4_en_update_loopback_state(). Those calls are unnecessary, and should be called only upon loopback feature change. Also moved some of the logic into mlx4_en_update_loopback_state(). Signed-off-by:
-
Ido Shamay authored
Enable RSS support for fragmented IP packets, when device supports it. Until now, fragmented IP packets were directed only to the default_qpn. Since IP fragments (datagram) have no upper protocols (L3 IP packets), hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW makes sure that this holds for the 1st fragment too, so all fragments go to the same QP. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: -
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "This time we have addition of caps for jz4740 which fixes intentional warning at boot. Then we have memory leak issues in drivers using virt-dma by Peter on few drive" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: moxart-dma: Fix memory leak when stopping a running transfer dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer dmaengine: omap-dma: Fix memory leak when terminating running transfer dmaengine: edma: fix memory leak when terminating running transfers dmaengine: jz4740: Define capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from Johannes Berg. 2) iwlwifi leaks memory every module load/unload cycles, fix from Larry Finger. 3) Need to use for_each_netdev_safe() in rtnl_group_changelink() otherwise we can crash, from WANG Cong. 4) mlx4 driver does register_netdev() too early in the probe sequence, from Ido Shamay. 5) Don't allow router discovery hop limit to decrease the interface's hop limit, from D.S. Ljungmark. 6) tx_packets and tx_bytes improperly accounted for certain classes of USB network devices, fix from Ben Hutchings. 7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr tables in the error path, they must instead use ip{6}mr_free_table(). Fix from WANG Cong. 8) cxgb4 doesn't properly quiesce all RX activity before unregistering the netdevice. Fix from Hariprasad Shenai. 9) Fix hash corruptions in ipvlan driver, from Jiri Benc. 10) nla_memcpy(), like a real memcpy, should fully initialize the destination buffer, even if the source attribute is smaller. Fix from Jiri Benc. 11) Fix wrong error code returned from iucv_sock_sendmsg(). We should use whatever sock_alloc_send_skb() put into 'err'. From Eugene Crosser. 12) Fix slab object leak on module unload in TIPC, from Ying Xue. 13) Need a READ_ONCE() when reading the cached RX socket route in tcp_v{4,6}_early_demux(). From Michal Kubecek. 14) Still too many problems with TPC support in the ath9k driver, so disable it for now. From Felix Fietkau. 15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from Larry Finger. 16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian King. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) cxgb4: Fix to dump devlog, even if FW is crashed cxgb4: Firmware macro changes for fw verison 1.13.32.0 bnx2x: Fix kdump when iommu=on bnx2x: Fix kdump on 4-port device mac80211: fix RX A-MPDU session reorder timer deletion MAINTAINERS: Update Intel Wired Ethernet Driver info tipc: fix a slab object leak net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet af_iucv: fix AF_IUCV sendmsg() errno openvswitch: Return vport module ref before destruction netlink: pad nla_memcpy dest buffer with zeroes bonding: Bonding Overriding Configuration logic restored. ipvlan: fix check for IP addresses in control path ipvlan: do not use rcu operations for address list ipvlan: protect against concurrent link removal ipvlan: fix addr hash list corruption net: fec: setup right value for mdio hold time net: tcp6: fix double call of tcp_v6_fill_cb() cxgb4vf: Fix sparse warnings netns: don't clear nsid too early on removal ... -
David S. Miller authored
Nicolas Dichtel says: ==================== Remove iflink field from the net_device structure The first goal of this series was to advertise the veth peer via the IFLA_LINK attribute, but iflink was not ready for network namespaces. The iflink of an interface should be set to its ifindex for a physical interface and to another value (0 if not relevant) for a virtual interface. This was not the case for some interfaces, like vxlan, bond, or bridge for example. There is also a risk, if the targeted interface moves to another netns, that the ifindex changes without updating corresponding iflink fields (eg. vlan). Moving the management of this property into virtual interface drivers allows to better handle this last case because most of virtual interface drivers have a pointer to the link netdevice. Anyway, dev->iflink value was always a copy of some internal data of the virtual interface driver, thus let's use these internal data directly. So, this series removes the iflink field and let the drivers manage it. Only the last patch was present in the v1, but I fully rework it. ==================== Signed-off-by: -
Nicolas Dichtel authored
Now that the peer netns is advertised in rtnl messages, we can set this property so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get the full veth configuration. Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Virtual interfaces are supposed to set an iflink value != of their ifindex. It was not the case for some of them, like vxlan, bond or bridge. Let's set iflink to 0 when dev->rtnl_link_ops is set. Signed-off-by:
-
Nicolas Dichtel authored
Now that all users of iflink have the ndo_get_iflink handler available, it's possible to remove this field. By default, dev_get_iflink() returns the ifindex of the interface. Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Roland Dreier <roland@kernel.org> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Nicolas Dichtel authored
Don't use dev->iflink anymore. CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Nicolas Dichtel authored
The goal of this patch is to prepare the removal of the iflink field. It introduces a new ndo function, which will be implemented by virtual interfaces. There is no functional change into this patch. All readers of iflink field now call dev_get_iflink(). Signed-off-by:
-
tadeusz.struk@intel.com authored
After the TX sgl is expanded we need to explicitly mark end of data at the last buffer that contains data. Changes in v2 - use type 'bool' and true/false for 'mark'. Signed-off-by:
Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== DSA Mavell drivers refactoring and cleanup v1->v2: * Add missing signed-of-by: For patches authored by Guenter Roeck. * Add Reviewed by from Guenter Roack to patch #5. This is a collection of patches again net-next from today containing refactoring and consolidate of code, cleanups and using #define's to replace register numbers. Patch #1 Swaps the 6131 driver to use the consolidated setup code. Patch #2 Moves the Switch IDs used during probe into a central location. We need these later so that we can differentiate the different features the devices have. Patch #3 Makes the 6131 driver set the number of ports in the private state structure. It then uses this, rather than hard coded maximum number of ports. Patch #4 Similar to Patch #3, but for the 6123_61_65 driver. Patch #5 Similar to Patch #3, and #4, but for all the remaining drivers. This greatly increases the similarity of the code between drivers, allow further patches to consolidate the duplicated code. Patch #6 Consolidate the switch reset code, which has two minor variants. Removes around 35 lines per driver. Patch #7 Moves phy page access functions out of the 6352 driver into the shared code. Currently only the 6352 driver uses this, but it is likely other devices will come along wanting this functionality. Patch #8 Consolidates the code used to access phy registers. Removes around 40 lines of code per driver. Patch #9 Fixes missing mutex locking in the EEE code, and refactors the code a bit to make it more understandable with respect to locks. Patch #10 Consolidates reading statistics. This is very similar code for all devices, but the number of available statistics differ, which can be determined from the product ID. Removes around 65 lines per driver. Patch #11 Add #defines for registers, and bits within the registers. For the moment, this is limited to the shared code. The individual drivers will be converted once the remaining duplicated code is consolidated Patch #12 Fix broken statistic counters on the 6172. The 6352 family requires the port number is poked into a different set of bits in the register compared to other devices. Many thanks to Guenter Roeck for repeatedly reviewing the patches and testing them on his hardware. ==================== Signed-off-by: -
Andrew Lunn authored
The statistic counters for the mv88e6172 never worked. This device is a member of the 6352 family of chips, which has a slightly different layout of the register used for capturing statistics. Add support for detecting this family and poking the port in the right place in the register. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
-
Andrew Lunn authored
Rather than refer to registers by number, define mnemonics. Also define mnemonics for the commonly used bits within the registers. Signed-off-by:
-
Andrew Lunn authored
Reading the statistics from the hardware is the same for all chips. What differs is the number of available statistics. Have just one copy of the code in the shared mv88e6xxx. Signed-off-by:
-
