Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators.

Fixes: 71342fb9 ("arm64: dts: qcom: Add base SM8550 MTP dts")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org

Generic SMMU compatibles are not allowed alone and we expect specific
one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127115513.268843-1-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-11-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-5-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-4-krzysztof.kozlowski@linaro.org

Device node names should be generic and bindings expect certain pattern
for RPMh regulator nodes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127114347.235963-3-krzysztof.kozlowski@linaro.org

Put cont splash memory region under the reserved-memory as
confirmed by the downstream code for both Tianma and EBBG variants.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127063355.1775246-1-amit.pundir@linaro.org

Populate the audio devices found on the OnePlus 6 and 6T using the
sdm845-sndcard driver.

Both devices have the earpiece and headphone jack connected to the
WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is
already supported upstream. The OnePlus 6T uses a currently unsupported
TFA9894 codec.

Two internal microphones are supported, as well as an external headset
mic. Each DAI link is expected to be used for a single device.

Alsa UCM2 configs for this setup can be found here, they are not yet
upstream and include support for call audio which is missing in this
patch

https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlusCo-developed-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230125231829.2621768-1-caleb.connolly@linaro.org

Clock for WCD9340 is coming from the SoC and is the same in all users,
so move it to common file to reduce the code duplication (which still
allows further customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-6-krzysztof.kozlowski@linaro.org

Pin configuration fow WCD9340 is the same in all users, so move it to
common file to reduce the code duplication (which still allows further
customizations per board).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-5-krzysztof.kozlowski@linaro.org

Re-organize SDM845 audio codec into separate, audio DTSI which
should be included and customized by the SDM845 boards wanting audio.
The codec node is anyway not a property of the SoC, but the boards.

On all others boards not using audio, keep the Slimbus node disabled as
it is empty.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-4-krzysztof.kozlowski@linaro.org

There is dedicated compatible for Lenovo Yoga C630 sound card
(documented in bindings and used by Linux driver), so use it along with
a generic sound card fallback. The device is actually fully compatible
with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-3-krzysztof.kozlowski@linaro.org

Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-2-krzysztof.kozlowski@linaro.org

Use generic sound card fallback compatible, because the device is
actually fully compatible with the generic one.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123084300.22353-1-krzysztof.kozlowski@linaro.org

They are not used on all boards, so disable them by default.
Enable them back on MTP/RB5, which were the only current users.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org

The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.

Fixes: 377972ac ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-4-krzysztof.kozlowski@linaro.org

The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.

Fixes: f5837418 ("arm64: dts: qcom: sm8450: add uart20 node")
Fixes: 5188049c ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org

The serial/UART device node does not have children with unit addresses,
so address/size cells are not correct.

Fixes: cf03cd7e ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org

Node names should be generic (as Devicetree spec mandates), so use
"bluetooth" for BT node.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org

Use the correct compatible so that the driver can probe properly.

Fixes: a6dd1206 ("arm64: dts: qcom: sm8450: add display hardware devices")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org

IPQ8074 has efuses like other Qualcomm SoC-s that are required for
determining various HW quirks which will be required later for CPR etc,
so lets add the QFPROM node for start.

Individidual fuses will be added as they are required.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101631.475712-2-robimarko@gmail.com

The USB-DP PHY resets have been switched.

Fixes: 7f7e5c1b ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230123101607.2413-1-johan+linaro@kernel.org

Add device tree node for the CBF clock.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-8-dmitry.baryshkov@linaro.org

The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather
than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch
msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1.

Fixes: 2b8c9c77 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org

Specify interconnects to be used by the UFS host controller.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119144326.2492847-3-dmitry.baryshkov@linaro.org

Add watchdog node in Qualcomm sm6115 SoC dtsi.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119123200.1021735-1-bhupesh.sharma@linaro.org

The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':

  sc7280-idp.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-2-krzysztof.kozlowski@linaro.org

The sound card does not expose DAIs and does not use custom qcom
properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and
'qcom,msm-mbhc-hphl-swh':

  sc7280-herobrine-crd.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+'
Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119122205.73372-1-krzysztof.kozlowski@linaro.org

SM6115's SMMU uses 36bit VAs, which is a good indicator that we
should increase (dma-)ranges - and by extension #address- and
 #size-cells to prevent things from getting lost in translation
(both literally and figuratively). Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-2-konrad.dybcio@linaro.org

Add a mdss_ prefix to mdss nodes to keep them all near each other
when referencing them by label in device DTs.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org

This commit adds support for the ufi-001C and uf896 WiFi/LTE dongle made by
Tong Heng Wei Chuang based on MSM8916.
uf896 is another variant for the usb stick. The board design
differs by using different gpios for the keys and leds.

Note: The original firmware does not support 64-bit OS. It is necessary
to flash 64-bit TZ firmware to boot arm64.

Currently supported:
- All CPU cores
- Buttons
- LEDs
- Modem
- SDHC
- USB Device Mode
- UART
Co-developed-by: Jaime Breva <jbreva@nayarsystems.com>
Signed-off-by: Jaime Breva <jbreva@nayarsystems.com>
Co-developed-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Signed-off-by: Yang Xiwen <forbidden405@foxmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart.
Add the debug uart node in sm6115 dtsi file.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230208122718.338545-1-bhupesh.sharma@linaro.org

Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio
SubSystem Low Power Island) pin controller nodes used as part of audio
subsystem on SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Shortened stream mask, per Konrad's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206150744.513967-1-krzysztof.kozlowski@linaro.org

Some of the qualcomm qcard based herobrine devices can come with
a Pro variant of the chipset on the qcard. Such Pro qcards have
the smps9 from pm8350c ganged up with smps7 and smps8, so add a
.dtsi for pro skus that deletes the smps9 node and include it from
the new dts for the CRD Pro
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com

Nagara is definitely not SM8350, fix it!

Fixes: c53532f7 ("arm64: dts: qcom: pdx223: correct firmware paths")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230203142309.1106349-1-konrad.dybcio@linaro.org