- 30 May, 2015 40 commits
-
-
Geert Uytterhoeven authored
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Florian Echtler authored
When stop_streaming is called while a frame is currently being retrieved, the buffer being filled will still be returned with BUF_STATE_DONE. By resetting the sequence number and checking before returning the buffer, it can now correctly be returned with BUF_STATE_ERROR. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Florian Echtler authored
Add dev_dbg statements for easier future debugging; also change the warning about packet ID mismatches to debug output to avoid flooding the logs. This warning is only important in a very specific/rare use case when trying to correlate input events with video data. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Florian Echtler authored
Add missing functions to query the single fixed frame size (960x540) and supported frame rates. Technically, the SUR40 supports any arbitrary frame rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Florian Echtler authored
The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth, one raw frame will take about 11 ms to transmit. If the poll interval is above 5 ms, fully handling one frame will take longer than 16 ms and the overall frame rate will drop below 60 FPS. To get the full frame rate without blocking all the time and still allowing for a bit of timing jitter, we reduce the poll interval to 4 ms. Signed-off-by: Martin Kaltenbrunner <modin@yuri.at> Signed-off-by: Florian Echtler <floe@butterbrot.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
U8 and U16LE format human readable names were translated with string containing emulated word. These strings were taken from msi2500 driver, where those formats were emulated (after module parameter is set). But on API correct names should be used, without any special case notes. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Antti Palosaari authored
Add complex unsigned 8-bit sample format for SDR capture. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Use these defines instead of hardcoding this in any driver that needs it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The mapping of COLORSPACE_DEFAULT, YCBCR_ENC_DEFAULT or QUANTIZATION_DEFAULT to proper non-default values is fairly complex, and it is something that needs to be done both in the kernel and in userspace. So add macros that can do this conversion, making this available to both kernel and userspace. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Document this new colorspace define. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
V4L2_COLORSPACE_RAW is added for raw image formats where the picture is minimally processed and is in the internal colorspace of the sensor. This is typically used in digital cameras where the image processing is done later. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Document this new colorspace define. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
V4L2_COLORSPACE_DEFAULT is added so we have a specific define for the default case where applications do not set it but leave it to 0. In that case the driver will set the colorspace based on what it captures. This is already used, but we never had a define for the value 0. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The log_status ioctl should report if the audio input has mode Bilingual. However, the check against the itv->dualwatch_stereo_mode is completely wrong and is a left-over from the distant past. Not only is the bitmask obviously wrong, the test itself is broken too since itv->dualwatch_stereo_mode is no longer a bitmask at all. Fix this code properly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
This format was added but not documented. Do this now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ricardo Ribalda authored
Support for V4L2_PIX_FMT_Y16_BE, a 16 bit big endian greyscale format. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ricardo Ribalda authored
16 bit greyscale format, structured in Big Endian. Such a format can be converted into a PMN image just by adding a header. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ricardo Ribalda authored
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ricardo Ribalda authored
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Ricardo Ribalda authored
When sg_alloc_table_from_pages() does not fail it returns a sg_table structure with nents and nents_orig initialized to the same value. dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. The output of dma_map, should be used to transverse the scatter list. dma_unmap_sg needs the value passed to dma_map_sg (nents_orig). sg_free_tables uses also orig_nent. This patch fix the file to follow this paradigm. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The adv7604 driver depends on GPIOLIB, and therefore cobalt depends on it as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/saa7164/saa7164-i2c.c:45:33: warning: Using plain integer as NULL pointer Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/cobalt/cobalt-v4l2.c:189:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:191:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:192:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:193:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:194:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:195:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:196:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:197:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:198:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:199:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:201:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:202:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:203:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:234:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:240:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:246:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:266:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:267:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:271:28: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:275:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:276:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:312:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:313:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:314:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:315:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:317:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:320:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:321:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:321:36: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:324:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:327:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:328:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:328:41: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:329:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:331:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:332:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:334:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:335:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:336:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:362:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:367:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:368:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:420:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:421:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:422:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:423:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:516:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:518:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:525:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:531:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:546:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:548:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:549:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:550:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:551:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:552:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:553:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:554:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:555:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:556:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:563:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:564:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:569:9: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:595:16: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-v4l2.c:602:9: warning: dereference of noderef expression Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/cobalt/cobalt-i2c.c:130:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:147:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:151:26: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:156:34: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:206:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:210:26: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:215:34: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:225:27: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:335:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:336:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:337:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:348:34: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:352:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:353:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:356:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:357:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-i2c.c:359:17: warning: dereference of noderef expression Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/cobalt/cobalt-irq.c:62:33: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:64:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:65:23: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:72:21: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:73:25: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:74:25: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:82:33: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:83:33: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:91:25: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:94:23: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:103:25: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:107:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:109:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:116:13: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:119:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:120:17: warning: dereference of noderef expression drivers/media/pci/cobalt/cobalt-irq.c:122:17: warning: dereference of noderef expression Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/cobalt/cobalt-flash.c:101:5: warning: symbol 'cobalt_flash_probe' was not declared. Should it be static? drivers/media/pci/cobalt/cobalt-flash.c:126:6: warning: symbol 'cobalt_flash_remove' was not declared. Should it be static? drivers/media/pci/cobalt/cobalt-cpld.c:101:6: warning: symbol 'cobalt_cpld_status' was not declared. Should it be static? drivers/media/pci/cobalt/cobalt-cpld.c:240:6: warning: symbol 'cobalt_cpld_set_freq' was not declared. Should it be static? Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/pci/cobalt/cobalt-flash.c:39:36: warning: incorrect type in initializer (different address spaces) drivers/media/pci/cobalt/cobalt-flash.c:54:36: warning: incorrect type in initializer (different address spaces) drivers/media/pci/cobalt/cobalt-flash.c:63:36: warning: incorrect type in initializer (different address spaces) drivers/media/pci/cobalt/cobalt-flash.c:82:36: warning: incorrect type in initializer (different address spaces) drivers/media/pci/cobalt/cobalt-flash.c:107:19: warning: incorrect type in assignment (different address spaces) Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90 .rangehigh = 2208000000L, ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Fixes these warnings: drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'omni_sg_dma_start': drivers/media/pci/cobalt/cobalt-omnitek.c:112:28: warning: right shift count >= width of type [-Wshift-count-overflow] iowrite32((u32)(desc->bus >> 32), DESCRIPTOR(s->dma_channel) + 4); ^ drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_create': drivers/media/pci/cobalt/cobalt-omnitek.c:222:28: warning: right shift count >= width of type [-Wshift-count-overflow] d->next_h = (u32)(next >> 32); ^ drivers/media/pci/cobalt/cobalt-omnitek.c:268:32: warning: right shift count >= width of type [-Wshift-count-overflow] d->next_h = (u32)(desc->bus >> 32); ^ drivers/media/pci/cobalt/cobalt-omnitek.c:275:27: warning: right shift count >= width of type [-Wshift-count-overflow] d->next_h = (u32)(next >> 32); ^ drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_chain': drivers/media/pci/cobalt/cobalt-omnitek.c:293:31: warning: right shift count >= width of type [-Wshift-count-overflow] d->next_h = (u32)(next->bus >> 32); ^ drivers/media/pci/cobalt/cobalt-omnitek.c: In function 'descriptor_list_loopback': drivers/media/pci/cobalt/cobalt-omnitek.c:332:30: warning: right shift count >= width of type [-Wshift-count-overflow] d->next_h = (u32)(desc->bus >> 32); ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
[linuxtv-media:master 1023/1029] ERROR: "__aeabi_uldivmod" [drivers/media/pci/cobalt/cobalt.ko] undefined! Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
The interrupt bit assignments use for the adv7511 were off by one. This means that the current scheme (bit << (4 * stream_index)) can no longer be used. Fix this by precalculating and storing the correct masks in the cobalt_stream struct. This wasn't noticed before because the adv7511 interrupts are very rare. But for CEC support these interrupts are essential, so this made me realize that it wasn't working correctly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The DVB part of the media API documentation has several legacy things on it: - Examples that don't work; - APIs unused and deprecated; - places mentioning the wrong API version. Fix them and bump the documentation version, in order to reflect the cleanup efforts to make it more consistent with the current status of the API. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Due to a cut-and-paste error, the argument is missing or wrong on 3 ioctl documentation. Fix them. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
The notes there are somewhat confusing and assumes that the reader would have read the DVBv3 way. This is not true anymore, as the DVBv3 is now on a separate section that is marked as deprecated. So, cleanup the notes. While here, add a note about using libdvbv5, instead of using the DVBv5 API directly. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
In order to make it clearer about how to use the DVBv5 calls, add an example of its usage. That should make it clearer about what's actually required for the DVBv5 calls to work. While here, also mentions the libdvbv5 library. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Rename the tytle of the struct documentation to reflect the name of the structures, and use links to do cross-ref. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Format it as a table and links it with the legacy API xml. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Format it as a table and add more details, in special for DTMB guard intervals. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Format it as a table and add more details. Also, remove the duplicated occurrences. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-