Currently the check on error return from the call to rtsx_write_register
is checking the error status from the previous call. Fix this by adding
in the missing assignment of retval.

Detected by CoverityScan, CID#709877

Fixes: fa590c22 ("staging: rts5208: add support for rts5208 and rts5288")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function only has one caller so mask_width is 1 and mask_shift is
32.  Shifting an int by 32 bits is undefined, but I guess on GCC it
wraps to 0x1?  Anyway it's supposed to be 0x100000000.

Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The > should be >= or we end up writing one element beyond the end of
the interrupt_data->eventfd_ctxs[] array.

Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We forgot to set the error code on this error path so ret can be
uninitialized.

Fixes: 9a69f508 ("drivers/staging: Gasket driver framework + Apex driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As already done treewide, switch from open-coded multiplication to using
2-factor allocator helpers.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We don't really need initialization of this at such an early stage.
Just use builtin_platform_driver to initialize this driver.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The debug information provided by this function does not make
sense at all, so just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Trivial change to have only one return in 'rt2880_get_group_name'
function using a ternary operator instead of an if statement and
two returns.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using 'function' and 'group' bindings in the device tree give the
posibility of refactor 'rt2880_pinctrl_dt_node_to_map' and simplify
it a lot. Make use of 'for_each_node_with_property' function to count
number of groups for the node and iterate over the groups using
'of_property_for_each_string' calling 'pinctrl_utils_add_map_mux'
function which is the same of the custom function in this driver code
'rt2880_pinctrl_dt_subnode_to_map' which is not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to documentation 'pinctrl-bindings.txt' bindings 'group'
and 'function' can be used directly. So replace all of them.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function rt2880_pinctrl_dt_node_to_map was using 'kzalloc' to
reserve map memory. There is a 'pinctrl_utils_reserve_map' to
do this function. Just use it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Struct 'rt2880_priv' contains a field 'gpio' which is defined
as uint8_t and should be defined with 'u8' which is preferred.
Update some cast along the code related with this new change.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There was a custom 'rt2880_pinctrl_dt_free_map' function which
it was doing the same as pinctrl_utils_free_map defined in
'pinctrl-utils.h' header file. Use it instead avoiding
code duplications.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kernel coding style use tabs for indent code instead of spaces.
Fix some places where spaces were being used silencing also
checkpatch script complains.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function parameters along the code has different alignment styles.
Just unify all of them making style consistent.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For a constant format without additional arguments, use seq_puts()
instead of seq_printf() fixing also the following checkpatch.pl
warning: 'Prefer seq_puts to seq_printf'
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit silence checkpatch warnings about lines which
exceeds 80 chars.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adding spaces between if condition and parenthesis are not
needed at all and checkpatch script complains about them.
Fix one in driver code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The patch fixes the following issue:
WARNING: printk() should include KERN_<LEVEL> facility level
Signed-off-by: Sergej Perschin <ser.perschin@gmail.com>
Signed-off-by: Marcel Budoj <marcel.budoj@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of using a custom function to return desired name for gpio
use the default assigned one and concat it '-bankN' suffix using
devm_kasprintf kernel function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bgpio_init function set different data of the gpio chip, like the name.
We want specific name for each bank so to get that not overwritten
move all custom changes after the bgpio_init function call.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The default gpio.of_xlate function assumes there is one gpio chip
for each devicetree node. Device tree had changed to only use one node,
which corresponds to 3 different gpio chips now. For that approach
to work we need a custom xlate function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is only one irq chip so set its name only once
in driver probe function.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dev section was opening curly bracket, but not adding ident, which
resulted in two times "}," after each other with same indentation. Add
ident at the right place fixes this problem.

This formatting issue is not detectable by checkpatch.pl
Signed-off-by: Radek Dostál <radek.dostal@streamunlimited.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Write multiple single line comments as block comments to
follow kernel coding style and improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The return type of a function should be on the same line as the
definition.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reorder the cases of a switch statement to be in ascending order.
Remove unrequired break from default case.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simplify if else statement to a single function call
by passing the variable.
Suggested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use if(x) and if(!x) instead of comparsion to true/false.
Reported by checkpatch.

Remove unrequired braces from single if else statement.
Add missing space after else: else{ -> else {
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The file includes the file rtl819x_HT.h, which has already been included by
the previously included file ieee80211.h
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Put data to skb, decrypt with lib80211_crypt_wep, and place back to tx buffer.
Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Whether any of the conditions is true or not, the return variable
is always set to rtw_resume_process(padapter). Replace the if else
construct with a single call to rtw_resume_process(). Also remove
the now unused local variable pwrpriv.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary parentheses as reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix line over 80 characters by replacing tab with space.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The header rtw_ioctl_rtl.h is not used anywhere.
Running 'grep -r rtw_ioctl_rtl *' from kernel root
directory returns nothing, remove the file.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gcc 8.1.0 generates the following warnings.

drivers/staging/speakup/kobjects.c: In function 'punc_store':
drivers/staging/speakup/kobjects.c:522:2: warning:
	'strncpy' output truncated before terminating nul
	copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:504:6: note: length computed here

drivers/staging/speakup/kobjects.c: In function 'synth_store':
drivers/staging/speakup/kobjects.c:391:2: warning:
	'strncpy' output truncated before terminating nul
	copying as many bytes from a string as its length
drivers/staging/speakup/kobjects.c:388:8: note: length computed here

Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Gasket (Google ASIC Software, Kernel Extensions, and Tools) kernel
framework is a generic, flexible system that supports thin kernel
drivers. Gasket kernel drivers are expected to handle opening and
closing devices, mmap'ing BAR space as requested, a small selection of
ioctls, and handling page table translation (covered below). Any other
functions should be handled by userspace code.

The Gasket common module is not enough to run a device. In order to
customize the Gasket code for a given piece of hardware, a device
specific module must be created. At a minimum, this module must define a
struct gasket_driver_desc containing the device-specific data for use by
the framework; in addition, the module must declare an __init function
that calls gasket_register_device with the module's gasket_driver_desc
struct. Finally, the driver must define an exit function that calls
gasket_unregister_device with the module's gasket_driver_desc struct.

One of the core assumptions of the Gasket framework is that precisely
one process is allowed to have an open write handle to the device node
at any given time. (That process may, once it has one write handle, open
any number of additional write handles.) This is accomplished by
tracking open and close data for each driver instance.
Signed-off-by: Rob Springer <rspringer@google.com>
Signed-off-by: John Joseph <jnjoseph@google.com>
Signed-off-by: Simon Que <sque@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's been four years since this was added.  In the interim, skein has
not seen any mainstream adoption.  Same with the threefish block cipher
upon which it's based.

In the discussion over which hash algorithm will replace SHA1 in git,
it's not one of the contenders.

There's absolutely no reason to think that there is anything wrong with
Skein or Threefish.  The only reason for this removal is a lack of
adoption.

If a real user comes forward, I'd be happy to assist with integrating
this code into mainline.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We want the staging/iio fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>