Weak header file declarations are error-prone because they make every
definition weak, and the linker chooses one based on link order (see
10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node
decl")).

That's not a problem for vpe_run() because Kconfig ensures there's never
more than one definition:

  - vpe_run() is defined in arch/mips/kernel/vpe-mt.c if
    CONFIG_MIPS_VPE_LOADER_MT=y

  - vpe_run() is defined in arch/mips/mti-malta/malta-amon.c if
    CONFIG_MIPS_CMP=y

  - CONFIG_MIPS_VPE_LOADER_MT cannot be set if CONFIG_MIPS_CMP=y

But it's simpler to verify correctness if we remove "weak" from the picture
and test the config symbols directly.

Remove "weak" from the vpe_run() declaration and use #if to test whether a
definition should be present.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10684/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

vpe_run() is a weak symbol.  If there's no definition of it, its value is
zero.

If vpe_run is zero, return failure early.  We're going to fail anyway, so
there's no point in getting a VPE and attempting to load it.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10683/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Weak header file declarations are error-prone because they make every
definition weak, and the linker chooses one based on link order (see
10629d71 ("PCI: Remove __weak annotation from pcibios_get_phb_of_node
decl")).

platform_maar_init() is defined in:

  - arch/mips/mm/init.c (where it is marked "weak")
  - arch/mips/mti-malta/malta-memory.c (without annotation)

The "weak" attribute on the platform_maar_init() extern declaration applies
to the platform-specific definition in arch/mips/mti-malta/malta-memory.c,
so both definitions are weak, and which one we get depends on link order.

Remove the "weak" attribute from the declaration.  That makes the malta
definition strong, so it will always be preferred if it is present.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: linux-mips@linux-mips.org
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10682/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There's only one implementation of mips_cpc_phys_base(), and it's only used
within the same file, so it doesn't need to be weak, and it doesn't need an
extern declaration.

Remove the extern mips_cpc_phys_base() declaration and make it static.

[ralf@linux-mips.org: Fixed conflict.]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: linux-mips@linux-mips.org
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10681/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The debug.h header provided some MIPS-specific debug macros, which are
no longer used at all. Remove them.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10693/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The db_assert call checks whether the bus_num pointer is non-NULL, but
does so after said pointer has been dereferenced by the assignment on
the previous line. Thus the check is pointless & likely to have been
optimised out by the compiler anyway. The check_args function is static
& only ever called from the local file with bus_num being a pointer to
an on-stack variable, so the check seems somewhat overzealous anyway.
Simply remove it.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10692/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10706/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The irq argument of most interrupt flow handlers is unused or merily
used instead of a local variable. The handlers which need the irq
argument can retrieve the irq number from the irq descriptor.

Search and update was done with coccinelle and the invaluable help of
Julia Lawall.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10705/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The gpio interrupt handling of octeon contains a homebrewn flow
handler which calls either handle_level_irq or handle_edge_irq
depending on the trigger type. Thats an extra conditional and call in
the interrupt handling path. The proper way to handle different types
and therefor different flows is to update the handler in the
irq_set_type() callback.

Remove the extra indirection and add the handler update to
octeon_irq_ciu_gpio_set_type(). At mapping time it defaults to
handle_level_irq which gets updated if the device tree contains a
different trigger type.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Daney <david.daney@cavium.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10704/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The various interrupt flow handlers in ath79 are cascading interrupt
handlers. They all have a disable_irq_nosync()/enable_irq() pair
around the generic_handle_irq() call. The value of this disable/enable
is zero because its a complete noop:

disable_irq_nosync() merily increments the disable count without
actually masking the interrupt. enable_irq() soleley decrements the
disable count without touching the interrupt chip. The interrupt
cannot arrive again because the complete call chain runs with
interrupts disabled.

Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10703/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

bcsr_csc_handler() is a cascading interrupt handler. It has a
disable_irq_nosync()/enable_irq() pair around the generic_handle_irq()
call. The value of this disable/enable is zero because its a complete
noop:

disable_irq_nosync() merily increments the disable count without
actually masking the interrupt. enable_irq() soleley decrements the
disable count without touching the interrupt chip. The interrupt
cannot arrive again because the complete call chain runs with
interrupts disabled.

Remove it.

[ralf@linux-mips.org: Fold in followup fix from Thomas Gleixner.]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10702/
Patchwork: https://patchwork.linux-mips.org/patch/10708/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Use irq_set_handler_locked() as it avoids a redundant lookup of the
irq descriptor.

Search and replacement was done with coccinelle.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10701/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Hand in irq_data and avoid the redundant lookup of irq_desc.

Originally-from: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10700/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This is a preparatory patch for moving irq_data struct members.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Patchwork: https://patchwork.linux-mips.org/patch/10699/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10698/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10697/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10696/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Chained irq handlers usually set up handler data as well. We now have
a function to set both under irq_desc->lock. Replace the two calls
with one.

Search and conversion was done with coccinelle.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: linux-mips@linux-mips.org
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Patchwork: https://patchwork.linux-mips.org/patch/10695/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Set up the I6400 FTLB probability similar to P5600 and proAptiv.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10652/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

R6 has dropped the MMUExtDef field from the config4 register and it
now returns 0. However, the return value means nothing in that case
and the only supported configuration for R6 is the VTLB+FTLB
(MMUextDef == 3). As a result, rework the code so that the correct
value is set for R6 cores.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10651/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add a default case for the FTLB enable/disable code. This will be used
to detect that something went wrong in the set_ftlb_enable() function
either because that function knows nothing about the running core, or
simply because the core can't turn its FTLB on/off.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10650/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We are so early in the boot process where we really don't want to
stall and wait for CP0 FTLB related changes become visible so just drop
the cp0 hazard barrier.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10649/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

CM3 uses a 64-bit counter and compare registers so add support for
them in the GIC counter interrupt.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10648/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Previously, the GIC accessors were only accessing u32 registers but
newer CMs may actually be 64-bit on MIPS64 cores. As a result of which,
extended these accessors to support 64-bit reads and writes.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10709/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The CM cache error reporting code is not Malta specific and as such it
should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the
way cache errors are being recorded to the registers so extend the
previous code to add support for the CM3 as well.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10646/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The GCR CPC base register is 64-bit on 64-bit processors so use the
appropriate field.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10645/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The CMGCRBase register (CP0, 15, 3) register is 64-bit on MIPS64
so we change its type to unsigned long.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10644/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Previously, the CM accessors were only accessing CM registers as u32
types instead of using the native CM register with. However, newer CMs
may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs
(CM3) hold all the useful configuration bits in the lower half of the
64-bit registers (at least most of them) so they can still be accessed
using the current 32-bit accessors.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10707/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Allow platforms to perform platform-specific steps before configuring
the L2 cache. This is necessary for platforms with CM3 since the L2
parameters no longer live in the Config2 register.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10642/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Detect the L2 cache configuration from GCR_L2_CONFIG when a CM3 is
present in the system, rather than from Config2 which does not expose
the L2 configuration on I6400.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10641/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Provide accessor functions for the GCR_L2_CONFIG register introduced
with CM3, and define the bits included in the register.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10639/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Provide a function to trivially return the version of the CM present in
the system, or 0 if no CM is present. The mips_cm_revision() will be
used later on to determine the CM register width, so it must not use
the regular CM accessors to read the revision register since that will
lead to build failures due to recursive inlines.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10655/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

R6 does not support the MIPS MT ASE and the CMP/SMP options so
restrict them in order to prevent users from selecting incompatible
SMP configuration for R6 cores. We also disable the CPS/SMP option
because its support hasn't been added to the CPS code yet.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10637/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add a case in cpu_probe_mips for the MIPS I6400 processor ID, which sets
the CPU type to the new CPU_I6400.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10636/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add a CPU_I6400 case to various switch statements, doing the same thing
as for CPU_P5600.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10635/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add a Processor ID and CPU type for the MIPS I6400 core.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10634/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove the ugly cross tree include now that IRQCHIP_DECLARE moved to
linux/irqchip.h.
Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10633/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Pull SCSI fixes from James Bottomley:
 "A couple of major (hang and deadlock) fixes with fortunately fairly
  rare triggering conditions.  The PM oops is only really triggered by
  people using enclosure services (rare) and the fnic driver is mostly
  used in enterprise environments"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  SCSI: Fix NULL pointer dereference in runtime PM
  fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack

Pull MIPS bug fixes from Ralf Baechle:
 "Two more fixes for 4.2.

  One fixes a build issue with the LLVM assembler - LLVM assembler macro
  names are case sensitive, GNU as macro names are insensitive; the
  other corrects a license string (GPL v2, not GPLv2) such that the
  module loader will recognice the license correctly"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  FIRMWARE: bcm47xx_nvram: Fix module license.
  MIPS: Fix LLVM build issue.