- 22 Feb, 2018 9 commits
-
-
David Woodhouse authored
KVM/x86: Reduce retpoline performance impact in slot_handle_level_range(), by always inlining iterator helper methods commit 928a4c39 upstream. With retpoline, tight loops of "call this function for every XXX" are very much pessimised by taking a prediction miss *every* time. This one is by far the biggest contributor to the guest launch time with retpoline. By marking the iterator slot_handle_…() functions always_inline, we can ensure that the indirect function call can be optimised away into a direct call and it actually generates slightly smaller code because some of the other conditionals can get optimised away too. Performance is now pretty close to what we see with nospectre_v2 on the command line. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Tested-by:
Filippo Sironi <sironi@amazon.de> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan.van.de.ven@intel.com Cc: dave.hansen@intel.com Cc: jmattson@google.com Cc: karahmed@amazon.de Cc: kvm@vger.kernel.org Cc: rkrcmar@redhat.com Link: http://lkml.kernel.org/r/1518305967-31356-4-git-send-email-dwmw@amazon.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
This is the revised backport of the upstream commit b3defb79 We had another backport (e.g. 623e5c8a in 4.4.115), but it applies the new mutex also to the code paths that are invoked via faked kernel-to-kernel ioctls. As reported recently, this leads to a deadlock at suspend (or other scenarios triggering the kernel sequencer client). This patch addresses the issue by taking the mutex only in the code paths invoked by user-space, just like the original fix patch does. Reported-and-tested-by:
Andres Bertens <abertensu@yahoo.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Viresh Kumar authored
commit f8975cb1 upstream. This fixes the following warning by also sending the flags argument for gpio controllers: Property 'cs-gpios', cell 6 is not a phandle reference in /ahb/apb/spi@e0100000 Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Viresh Kumar authored
commit cdd10409 upstream. The "dmas" cells for the designware DMA controller need to have only 3 properties apart from the phandle: request line, src master and destination master. But the commit 6e8887f6 updated it incorrectly while moving from platform code to DT. Fix it. Cc: stable@vger.kernel.org # v3.10+ Fixes: 6e8887f6 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT") Reported-by:
-
Viresh Kumar authored
commit 6ffb5b4f upstream. The interrupt-parent of rtc was missing, add it. Fixes: 8113ba91 ("ARM: SPEAr: DT: Update device nodes") Cc: stable@vger.kernel.org # v3.8+ Reported-by:
-
Patrice Chotard authored
commit 7ac1f59c upstream. The GPIO polarity is missing in the hdmi,hpd-gpio property, this fixes the following DT warnings: arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000 [arnd: marked Cc:stable since this warning shows up with the latest dtc by default, and is more likely to actually cause problems than the other patches from this series] Cc: stable@vger.kernel.org Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Eugene Syromiatnikov authored
commit 6dd0d2d2 upstream. For some reason, the implementation of some 16-bit ID system calls (namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast instead of low2highgid/low2highuid macros for converting [GU]IDs, which led to incorrect handling of value of -1 (which ought to be considered invalid). Discovered by strace test suite. Cc: stable@vger.kernel.org Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bjorn Andersson authored
commit d1bf2d30 upstream. Propagate the error of devfreq_add_device() in devm_devfreq_add_device() rather than statically returning ENOMEM. This makes it slightly faster to pinpoint the cause of a returned error. Fixes: 8cd84092 ("PM / devfreq: Add resource-managed function for devfreq device") Cc: stable@vger.kernel.org Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Jack Morgenstein authored
commit 852f6927 upstream. Allocating steerable UD QPs depends on having at least one IB port, while releasing those QPs does not. As a result, when there are only ETH ports, the IB (RoCE) driver requests releasing a qp range whose base qp is zero, with qp count zero. When SR-IOV is enabled, and the VF driver is running on a VM over a hypervisor which treats such qp release calls as errors (rather than NOPs), we see lines in the VM message log like: mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0 Fix this by adding a check for a zero count in mlx4_release_qp_range() (which thus treats releasing 0 qps as a nop), and eliminating the check for device managed flow steering when releasing steerable UD QPs. (Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it remains NULL when steerable UD QPs are not allocated). Fixes: 4196670b ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
- 16 Feb, 2018 31 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (VMware) authored
commit 7b658656 upstream. __unregister_ftrace_function_probe() will incorrectly parse the glob filter because it resets the search variable that was setup by filter_parse_regex(). Al Viro reported this: After that call of filter_parse_regex() we could have func_g.search not equal to glob only if glob started with '!' or '*'. In the former case we would've buggered off with -EINVAL (not = 1). In the latter we would've set func_g.search equal to glob + 1, calculated the length of that thing in func_g.len and proceeded to reset func_g.search back to glob. Suppose the glob is e.g. *foo*. We end up with func_g.type = MATCH_MIDDLE_ONLY; func_g.len = 3; func_g.search = "*foo"; Feeding that to ftrace_match_record() will not do anything sane - we will be looking for names containing "*foo" (->len is ignored for that one). Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk Fixes: 3ba00929 ("ftrace: Introduce ftrace_glob structure") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org> Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Eric W. Biederman authored
commit 6ac1dc73 upstream. Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely not correct. With si_code set to SI_USER si_pid and si_uid will be copied to userspace instead of si_addr. Which is very wrong. So fix this by using a sensible si_code (SEGV_MAPERR) for this failure. Fixes: b920de1b ("mn10300: add the MN10300/AM33 architecture to the kernel") Cc: David Howells <dhowells@redhat.com> Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Amir Goldstein authored
commit d796e77f upstream. As a writable mount, it is not expected for overlayfs to return EINVAL/EROFS for fsync, even if dir/file is not changed. This commit fixes the case of fsync of directory, which is easier to address, because overlayfs already implements fsync file operation for directories. The problem reported by Raphael is that new PostgreSQL 10.0 with a database in overlayfs where lower layer in squashfs fails to start. The failure is due to fsync error, when PostgreSQL does fsync on all existing db directories on startup and a specific directory exists lower layer with no changes. Reported-by:
Raphael Hertzog <raphael@ouaza.com> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Tested-by:
Raphaël Hertzog <hertzog@debian.org> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 43cdd1b7 upstream. There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by:
Wang Qize <wang_qize@venustech.com.cn> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Keith Busch authored
commit 5bae7f73 upstream Upstream is a near rewrite of the async nvme probe that ultimately didn't even cleanly merge in 4.5. This patch is a much smaller change targeted to the regression introduced in 4.4. If a controller is in a degraded mode that needs admin assistence to recover, we need to leave the controller running. We just want to disable namespace access without shuting the controller down. Fixes: 3cf519b5("nvme: merge nvme_dev_start, nvme_dev_resume and nvme_async_probe") Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Nikolay Borisov authored
commit f3038ee3 upstream. This function was introduced by 247e743c ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Bart Van Assche authored
commit 5a0ec388 upstream. Commit 523e1d39 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d39 ("block: make gendisk hold a reference to its queue") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Tejun Heo <tj@kernel.org> Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
James Hogan authored
commit 544e9258 upstream. Fix an uninitialized variable warning in the Octeon EDAC driver, as seen in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU Tools 2016.05-03: drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’: drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \ be used uninitialized in this function [-Wmaybe-uninitialized] if (int_reg.s.sec_err || int_reg.s.ded_err) { ^ Iinitialise the whole int_reg variable to zero before the conditional assignments in the error injection case. Signed-off-by:
James Hogan <jhogan@kernel.org> Acked-by:
David Daney <david.daney@cavium.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: linux-mips@linux-mips.org Fixes: 1bc021e8 ("EDAC: Octeon: Add error injection support") Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Max Filippov authored
commit ca474809 upstream. Return 0 if the operation was successful, not the userspace memory value. Check that userspace value equals passed oldval, not itself. Don't update *uval if the value wasn't read from userspace memory. This fixes process hang due to infinite loop in futex_lock_pi. It also fixes a bunch of glibc tests nptl/tst-mutexpi*. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 55fc633c upstream. We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get machine check exception when attempting to reboot the machine. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 21ffceda upstream. On alpha, a process will crash if it attempts to start a thread and a signal is delivered at the same time. The crash can be reproduced with this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html The reason for the crash is this: * we call the clone syscall * we go to the function copy_process * copy process calls copy_thread_tls, it is a wrapper around copy_thread * copy_thread sets the tls pointer: childti->pcb.unique = regs->r20 * copy_thread sets regs->r20 to zero * we go back to copy_process * copy process checks "if (signal_pending(current))" and returns -ERESTARTNOINTR * the clone syscall is restarted, but this time, regs->r20 is zero, so the new thread is created with zero tls pointer * the new thread crashes in start_thread when attempting to access tls The comment in the code says that setting the register r20 is some compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug by zeroing regs->r20 only if CLONE_SETTLS is not set. Signed-off-by:
-
Eric W. Biederman authored
commit 0e88bb00 upstream. Set si_signo. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Fixes: 0983b318 ("sh: Wire up division and address error exceptions on SH-2A.") Signed-off-by:
-
Eric W. Biederman authored
commit 500d5830 upstream. While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access. Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix. Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing. Fixes: 769a8a96 ("OpenRISC: Traps") Cc: Jonas Bonn <jonas@southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Stafford Horne <shorne@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: openrisc@lists.librecores.org Acked-by:
Stafford Horne <shorne@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit 61f5acea upstream. Commit 7d06d589 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices, instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c. This was done because the DIY BTUSB_RESET_RESUME reset-resume handling has several issues (see the original commit message). An added advantage of moving over to the USB-core reset-resume handling is that it also disables autosuspend for these devices, which is similarly broken on these. But there are 2 issues with this approach: 1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek devices. 2) Sofar only 2 of the 10 QCA devices known to the btusb code have been added to usb/core/quirks.c and if we fix the Realtek case the same way we need to add an additional 14 entries. So in essence we need to duplicate a large part of the usb_device_id table in btusb.c in usb/core/quirks.c and manually keep them in sync. This commit instead restores setting a reset-resume quirk for QCA devices in the btusb.c code, avoiding the duplicate usb_device_id table problem. This commit avoids the problems with the original DIY BTUSB_RESET_RESUME code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the usb_device. This commit also moves the BTUSB_REALTEK case over to directly setting the USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused BTUSB_RESET_RESUME code. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 7d06d589 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"") Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 7d06d589 upstream. This reverts commit fd865802. This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted. Furthermore, this commit stops working after commit ("a0085f25 Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source. If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c. Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
-
Hans de Goede authored
commit b4cdaba2 upstream. BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT) use an UART connection for bluetooth. But they also advertise btsdio support on their 3th sdio function, this causes 2 problems: 1) A non functioning BT HCI getting registered 2) Since the btsdio driver does not have suspend/resume callbacks, mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify() to react as if the SDIO-card is removed and since the slot is marked as non-removable it will never get detected as inserted again. Which results in wifi no longer working after a suspend/resume. This commit fixes both by making btsdio ignore BCM43341 devices when connected to a slot which is marked non-removable. Signed-off-by:
-
Hans de Goede authored
commit edfc3722 upstream. The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo (single i2c_hid device for both) which has a vid:pid of 04F3:0401, which is also used by a bunch of Elan touchpads which are handled by the drivers/input/mouse/elan_i2c driver, but that driver deals with pure touchpads and does not work for a combo device such as the one on the Toshiba Click Mini. The combo on the Mini has an ACPI id of ELAN0800, which is not claimed by the elan_i2c driver, so check for that and if it is found do not ignore the device. This fixes the keyboard/touchpad combo on the Mini not working (although with the touchpad in mouse emulation mode). Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Rasmus Villemoes authored
commit 4f7e988e upstream. This reverts commit 92266d6e ("async: simplify lowest_in_progress()") which was simply wrong: In the case where domain is NULL, we now use the wrong offsetof() in the list_first_entry macro, so we don't actually fetch the ->cookie value, but rather the eight bytes located sizeof(struct list_head) further into the struct async_entry. On 64 bit, that's the data member, while on 32 bit, that's a u64 built from func and data in some order. I think the bug happens to be harmless in practice: It obviously only affects callers which pass a NULL domain, and AFAICT the only such caller is async_synchronize_full() -> async_synchronize_full_domain(NULL) -> async_synchronize_cookie_domain(ASYNC_COOKIE_MAX, NULL) and the ASYNC_COOKIE_MAX means that in practice we end up waiting for the async_global_pending list to be empty - but it would break if somebody happened to pass (void*)-1 as the data element to async_schedule, and of course also if somebody ever does a async_synchronize_cookie_domain(, NULL) with a "finite" cookie value. Maybe the "harmless in practice" means this isn't -stable material. But I'm not completely confident my quick git grep'ing is enough, and there might be affected code in one of the earlier kernels that has since been removed, so I'll leave the decision to the stable guys. Link: http://lkml.kernel.org/r/20171128104938.3921-1-linux@rasmusvillemoes.dk Fixes: 92266d6e "async: simplify lowest_in_progress()" Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Adam Wallis <awallis@codeaurora.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 9893b905 upstream. The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it. That prevents filling the dmesg with lots of messages like: dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 Fixes: 4d37ece7 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 81742be1 upstream. Before this patch, when compiled for arm32, the signal strength were reported as: Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB Because of a 32 bit integer overflow. After it, it is properly reported as: Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB Fixes: 0f91c9d6 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Martin Kaiser authored
commit 0be26725 upstream. When the watchdog device is suspended, its timeout is set to the maximum value. During resume, the previously set timeout should be restored. This does not work at the moment. The suspend function calls imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); and resume reverts this by calling imx2_wdt_set_timeout(wdog, wdog->timeout); However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore, wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume function. Fix this by adding a new function __imx2_wdt_set_timeout() which only updates the hardware settings. imx2_wdt_set_timeout() now calls __imx2_wdt_set_timeout() and then saves the new timeout to wdog->timeout. During suspend, we call __imx2_wdt_set_timeout() directly so that wdog->timeout won't be updated and we can restore the previous value during resume. This approach makes wdog->timeout different from the actual setting in the hardware which is usually not a good thing. However, the two differ only while we're suspended and no kernel code is running, so it should be ok in this case. Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Liran Alon authored
commit 6b697711 upstream. Consider the following scenario: 1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI to CPU B via virtual posted-interrupt mechanism. 2. CPU B is currently executing L2 guest. 3. vmx_deliver_nested_posted_interrupt() calls kvm_vcpu_trigger_posted_interrupt() which will note that vcpu->mode == IN_GUEST_MODE. 4. Assume that before CPU A sends the physical POSTED_INTR_NESTED_VECTOR IPI, CPU B exits from L2 to L0 during event-delivery (valid IDT-vectoring-info). 5. CPU A now sends the physical IPI. The IPI is received in host and it's handler (smp_kvm_posted_intr_nested_ipi()) does nothing. 6. Assume that before CPU A sets pi_pending=true and KVM_REQ_EVENT, CPU B continues to run in L0 and reach vcpu_enter_guest(). As KVM_REQ_EVENT is not set yet, vcpu_enter_guest() will continue and resume L2 guest. 7. At this point, CPU A sets pi_pending=true and KVM_REQ_EVENT but it's too late! CPU B already entered L2 and KVM_REQ_EVENT will only be consumed at next L2 entry! Another scenario to consider: 1. CPU A calls vmx_deliver_nested_posted_interrupt() to send an IPI to CPU B via virtual posted-interrupt mechanism. 2. Assume that before CPU A calls kvm_vcpu_trigger_posted_interrupt(), CPU B is at L0 and is about to resume into L2. Further assume that it is in vcpu_enter_guest() after check for KVM_REQ_EVENT. 3. At this point, CPU A calls kvm_vcpu_trigger_posted_interrupt() which will note that vcpu->mode != IN_GUEST_MODE. Therefore, do nothing and return false. Then, will set pi_pending=true and KVM_REQ_EVENT. 4. Now CPU B continue and resumes into L2 guest without processing the posted-interrupt until next L2 entry! To fix both issues, we just need to change vmx_deliver_nested_posted_interrupt() to set pi_pending=true and KVM_REQ_EVENT before calling kvm_vcpu_trigger_posted_interrupt(). It will fix the first scenario by chaging step (6) to note that KVM_REQ_EVENT and pi_pending=true and therefore process nested posted-interrupt. It will fix the second scenario by two possible ways: 1. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B has changed vcpu->mode to IN_GUEST_MODE, physical IPI will be sent and will be received when CPU resumes into L2. 2. If kvm_vcpu_trigger_posted_interrupt() is called while CPU B hasn't yet changed vcpu->mode to IN_GUEST_MODE, then after CPU B will change vcpu->mode it will call kvm_request_pending() which will return true and therefore force another round of vcpu_enter_guest() which will note that KVM_REQ_EVENT and pi_pending=true and therefore process nested posted-interrupt. Fixes: 705699a1 ("KVM: nVMX: Enable nested posted interrupt processing") Signed-off-by:
Liran Alon <liran.alon@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Reviewed-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> [Add kvm_vcpu_kick to also handle the case where L1 doesn't intercept L2 HLT and L2 executes HLT instruction. - Paolo] Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Marc Zyngier authored
commit 20e8175d upstream. KVM doesn't follow the SMCCC when it comes to unimplemented calls, and inject an UNDEF instead of returning an error. Since firmware calls are now used for security mitigation, they are becoming more common, and the undef is counter productive. Instead, let's follow the SMCCC which states that -1 must be returned to the caller when getting an unknown function number. Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Horia Geantă authored
commit 225ece3e upstream. In case DECO0 cannot be acquired - i.e. run_descriptor_deco0() fails with -ENODEV, caam_probe() enters an endless loop: run_descriptor_deco0 ret -ENODEV -> instantiate_rng -ENODEV, overwritten by -EAGAIN ret -EAGAIN -> caam_probe -EAGAIN results in endless loop It turns out the error path in instantiate_rng() is incorrect, the checks are done in the wrong order. Fixes: 1005bccd ("crypto: caam - enable instantiation of all RNG4 state handles") Reported-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Suggested-by:
Auer Lukas <lukas.auer@aisec.fraunhofer.de> Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Daniel Mentz authored
commit a1dfb4c4 upstream. The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492 ("v4l: introduce string control support.") Signed-off-by:
Daniel Mentz <danielmentz@google.com> Co-developed-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
commit d83a8243 upstream. Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by:
-
Hans Verkuil authored
commit 169f24ca upstream. There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by:
-
Hans Verkuil authored
commit a751be5b upstream. put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by:
-
Daniel Mentz authored
commit 025a26fa upstream. Commit b2787845 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by:
-
Hans Verkuil authored
commit 273caa26 upstream. If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8 ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
