The 'QM_INIT' and 'QM_CLOSE' status of qm and 'QP_INIT'
and 'QP_CLOSE' status of queue are not actually used. Currently,
driver only needs to switch status when the device or queue
is enabled or stopped, Therefore, remove unneeded status to
simplify driver. In addition, rename'QM_START to'QM_WORK' for
ease to understand.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Remove unnecessary brackets in function hisi_acc_create_sgl_pool().
2. Modify local variable type, ensure that the variable type is
consistent with the variable type to be compared.
3. Because the function clear_hw_sgl_sge() is in the task process,
obtain the value of le16_to_cpu(hw_sgl->entry_sum_in_sgl) before
loop execting to shorten the loop execution time.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

To meet specific application scenarios, the function of switching between
the high performance mode and the high compression mode is added.

Use the perf_mode=0/1 configuration to set the compression high perf mode,
0(default, high compression mode), 1(high performance mode). These two
modes only apply to the compression direction and are compatible with
software algorithm in both directions.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The compiler doesn't know that `32` is an offset into the Hash table:

 56 struct Hash_ctx {
 57         u8 H[16];       /* subkey */
 58         u8 Htable[256]; /* Xi, Hash table(offset 32) */
 59 };

So, it legitimately complains about a potential out-of-bounds issue
if `256 bytes` are accessed in `htable` (this implies going
`32 bytes` beyond the boundaries of `Htable`):

arch/powerpc/crypto/aes-gcm-p10-glue.c: In function 'gcmp10_init':
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: error: 'gcm_init_htable' accessing 256 bytes in a region of size 224 [-Werror=stringop-overflow=]
  120 |         gcm_init_htable(hash->Htable+32, hash->H);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 1 of type 'unsigned char[256]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:120:9: note: referencing argument 2 of type 'unsigned char[16]'
arch/powerpc/crypto/aes-gcm-p10-glue.c:40:17: note: in a call to function 'gcm_init_htable'
   40 | asmlinkage void gcm_init_htable(unsigned char htable[256], unsigned char Xi[16]);
      |                 ^~~~~~~~~~~~~~~

Address this by avoiding specifying the size of `htable` in the function
prototype; and just for consistency, do the same for parameter `Xi`.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20231121131903.68a37932@canb.auug.org.au/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The qat_rl sysfs attribute group is registered within the adf_dev_start()
function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_rl attribute group was successful or not.

In cases where this condition is encountered, an error similar to
the following might be reported:

    4xxx 0000:6b:00.0: Starting device qat_dev0
    4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
    4xxx 0000:6b:00.0: Failed to send init message
    4xxx 0000:6b:00.0: Failed to start device qat_dev0
    sysfs group 'qat_rl' not found for kobject '0000:6b:00.0'
    ...
    sysfs_remove_groups+0x2d/0x50
    adf_sysfs_rl_rm+0x44/0x70 [intel_qat]
    adf_rl_stop+0x2d/0xb0 [intel_qat]
    adf_dev_stop+0x33/0x1d0 [intel_qat]
    adf_dev_down+0xf1/0x150 [intel_qat]
    ...
    4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
    4xxx 0000:6b:00.0: Resetting device qat_dev0

To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.

Fixes: d9fb8408 ("crypto: qat - add rate limiting feature to qat_4xxx")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The qat_ras sysfs attribute group is registered within the
adf_dev_start() function, alongside other driver components.
If any of the functions preceding the group registration fails,
the adf_dev_start() function returns, and the caller, to undo the
operation, invokes adf_dev_stop() followed by adf_dev_shutdown().
However, the current flow lacks information about whether the
registration of the qat_ras attribute group was successful or not.

In cases where this condition is encountered, an error similar to
the following might be reported:

    4xxx 0000:6b:00.0: Starting device qat_dev0
    4xxx 0000:6b:00.0: qat_dev0 started 9 acceleration engines
    4xxx 0000:6b:00.0: Failed to send init message
    4xxx 0000:6b:00.0: Failed to start device qat_dev0
    sysfs group 'qat_ras' not found for kobject '0000:6b:00.0'
    ...
    sysfs_remove_groups+0x29/0x50
    adf_sysfs_stop_ras+0x4b/0x80 [intel_qat]
    adf_dev_stop+0x43/0x1d0 [intel_qat]
    adf_dev_down+0x4b/0x150 [intel_qat]
    ...
    4xxx 0000:6b:00.0: qat_dev0 stopped 9 acceleration engines
    4xxx 0000:6b:00.0: Resetting device qat_dev0

To prevent attempting to remove attributes from a group that has not
been added yet, a flag named 'sysfs_added' is introduced. This flag
is set to true upon the successful registration of the attribute group.

Fixes: 532d7f6b ("crypto: qat - add error counters")
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Current dev_err_probe will return 0 instead of proper error code if
driver failed to get irq number. Fix the return err code.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311160649.3GhKCfhd-lkp@intel.com/Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Doing ipsec produces a spinlock recursion warning.
This is due to crypto_finalize_request() being called in the upper half.
Move virtual data queue processing of virtio-crypto driver to tasklet.

Fixes: dbaf0624 ("crypto: add virtio-crypto driver")
Reported-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: wangyangxin <wangyangxin1@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Aad requires padding with zeroes up to 15 bytes in some cases. This
patch increases the allocated buffer size for aad and prevents the
driver accessing uninitialized memory region.

v1->v2: Specify reason for alloc size change in descriptions.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This helps validating DTS files.

Cc: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Hardware could not clear irq status without resetting the entire module.
Driver receives irq immediately when mask bit is cleared causing
intermittent errors in RSA calculations. Switch to use csr polling for
done status instead.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change AMBA_PL08X to required dependency as the hash ops depends on it
for data transfer.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use pm_sleep_ptr for the freeze and restore functions instead of putting
them under #ifdef CONFIG_PM_SLEEP. The resulting code is slightly simpler.

pm_sleep_ptr lets the compiler see the functions but also allows removing
them as unused code if !CONFIG_PM_SLEEP.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This fixes list_add corruption error when the driver is returned
with -EPROBE_DEFER. It is also required to roll back the previous
probe sequences in case of deferred_probe. So, this removes
'err_probe_defer" goto label and just use err_dma_init instead.

Fixes: 42ef0e94 ("crypto: starfive - Add crypto engine support")
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The x86 SHA-256 module contains four implementations: SSSE3, AVX, AVX2,
and SHA-NI.  Commit 1c43c0f1 ("crypto: x86/sha - load modules based
on CPU features") made the module be autoloaded when SSSE3, AVX, or AVX2
is detected.  The omission of SHA-NI appears to be an oversight, perhaps
because of the outdated file-level comment.  This patch fixes this,
though in practice this makes no difference because SSSE3 is a subset of
the other three features anyway.  Indeed, sha256_ni_transform() executes
SSSE3 instructions such as pshufb.
Reviewed-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The x86 SHA-1 module contains four implementations: SSSE3, AVX, AVX2,
and SHA-NI.  Commit 1c43c0f1 ("crypto: x86/sha - load modules based
on CPU features") made the module be autoloaded when SSSE3, AVX, or AVX2
is detected.  The omission of SHA-NI appears to be an oversight, perhaps
because of the outdated file-level comment.  This patch fixes this,
though in practice this makes no difference because SSSE3 is a subset of
the other three features anyway.  Indeed, sha1_ni_transform() executes
SSSE3 instructions such as pshufb.
Reviewed-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The "ring" variable has an upper bounds check but nothing checks for
negatives.  This code uses kstrtouint() already and it was obviously
intended to be declared as unsigned int.  Make it so.

Fixes: dbc8876d ("crypto: qat - add rp2svc sysfs attribute")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

SP800-90C 3rd draft states that SHA-1 will be removed from all
specifications, including drbg by end of 2030. Given kernels built
today will be operating past that date, start complying with upcoming
requirements.

No functional change, as SHA-256 / SHA-512 based DRBG have always been
the preferred ones.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update code comment, self test & healthcheck to use HMAC SHA512,
instead of HMAC SHA256. These changes are in dead-code, or FIPS
enabled code-paths only and have not effect on usual kernel builds.

On systems booting in FIPS mode that has the effect of switch sanity
selftest to HMAC sha512 based (which has been the default DRBG).

This patch updates code from 9b7b9468 ("crypto: DRBG - switch to
HMAC SHA512 DRBG as default DRBG"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When originally drbg was introduced FIPS self-checks for all types but
CTR were using the most preferred parameters for each type of
DRBG. Update CTR self-check to use aes256.

This patch updates code from 541af946 ("crypto: drbg - SP800-90A
Deterministic Random Bit Generator"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drbg supports multiple types of drbg, and multiple parameters of
each. Health check sanity only checks one drbg of a single type. One
can enable all three types of drbg. And instead of checking the most
preferred algorithm (last one wins), it is currently checking first
one instead.

Update ifdef to ensure that healthcheck prefers HMAC, over HASH, over
CTR, last one wins, like all other code and functions.

This patch updates code from 541af946 ("crypto: drbg - SP800-90A
Deterministic Random Bit Generator"), but is not interesting to
cherry-pick for stable updates, because it doesn't affect regular
builds, nor has any tangible effect on FIPS certifcation.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Static checkers insist that the mpi_alloc() allocation can fail so add
a check to prevent a NULL dereference.  Small allocations like this
can't actually fail in current kernels, but adding a check is very
simple and makes the static checkers happy.

Fixes: 6637e11e ("crypto: rsa - allow only odd e and restrict value in FIPS mode")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

EINPROGRESS and EBUSY have special meaning for async operations.
However, shash is always synchronous, so these statuses have no special
meaning for shash and don't need to be excluded when handling errors.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Simplify sun8i_ss_hashkey() by using crypto_shash_tfm_digest() instead
of an alloc+init+update+final sequence.  This should also improve
performance.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The 'offset' type is unsigned long in 'struct debugfs_reg32',
so type of values casts to unsigned long long is incorrect, and the
values do not require type cast, remove them.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When device is abnormal and reports abnormal interrupt event to driver,
the driver can print device information for error analysis. This patch
adds some device error-related information output after the device reports
an abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc.

Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc.  The warnings are false positives
because nengines is at most 2.

Make the buffer bigger and change the snprintf to use unsigned
integers to eliminate these warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The heuristics used by gcc triggers false positive truncation
warnings in hifn_alg_alloc.  The warning triggered by the strings
here are clearly false positives (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=95755).

Add checks on snprintf calls to silence these warnings, including
the one for cra_driver_name even though it does not currently trigger
a gcc warning.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other and pull in various other headers. In
preparation to fix this, adjust the includes for what is actually needed.

of_device.h isn't needed, but of.h is and was implicitly included by it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add kernel documentation for the aesgcm_mac.
This function generates the authentication tag using the AES-GCM algorithm.
Signed-off-by: Sagar Vashnav <sagarvashnav72427@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document SM8650 compatible for the True Random Number Generator.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document the crypto engine on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Document the Inline Crypto Engine (ICE) on the SM8650 Platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))

Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:

 - Include the upper 5 address bits when inserting TLB entries on a
   64-bit kernel.

   On physical machines those are ignored, but in qemu it's nice to have
   them included and to be correct.

 - Stop the 64-bit kernel and show a warning if someone tries to boot on
   a machine with a 32-bit CPU

 - Fix a "no previous prototype" warning in parport-gsc

* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Prevent booting 64-bit kernels on PA1.x machines
  parport: gsc: mark init function static
  parisc/pgtable: Do not drop upper 5 address bits of physical address

Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - support PREEMPT_DYNAMIC with static keys

 - relax memory ordering for atomic operations

 - support BPF CPU v4 instructions for LoongArch

 - some build and runtime warning fixes

* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  selftests/bpf: Enable cpu v4 tests for LoongArch
  LoongArch: BPF: Support signed mod instructions
  LoongArch: BPF: Support signed div instructions
  LoongArch: BPF: Support 32-bit offset jmp instructions
  LoongArch: BPF: Support unconditional bswap instructions
  LoongArch: BPF: Support sign-extension mov instructions
  LoongArch: BPF: Support sign-extension load instructions
  LoongArch: Add more instruction opcodes and emit_* helpers
  LoongArch/smp: Call rcutree_report_cpu_starting() earlier
  LoongArch: Relax memory ordering for atomic operations
  LoongArch: Mark __percpu functions as always inline
  LoongArch: Disable module from accessing external data directly
  LoongArch: Support PREEMPT_DYNAMIC with static keys

Pull powerpc fixes from Michael Ellerman:

 - Finish a refactor of pgprot_framebuffer() which dependend
   on some changes that were merged via the drm tree

 - Fix some kernel-doc warnings to quieten the bots

Thanks to Nathan Lynch and Thomas Zimmermann.

* tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc
  powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc
  powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code
  powerpc: Remove file parameter from phys_mem_access_prot()
  powerpc/machdep: Remove trailing whitespaces

Pull smb client fixes from Steve French:

 - ctime caching fix (for setxattr)

 - encryption fix

 - DNS resolver mount fix

 - debugging improvements

 - multichannel fixes including cases where server stops or starts
   supporting multichannel after mount

 - reconnect fix

 - minor cleanups

* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number for cifs.ko
  cifs: handle when server stops supporting multichannel
  cifs: handle when server starts supporting multichannel
  Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
  smb3: allow dumping session and tcon id to improve stats analysis and debugging
  smb: client: fix mount when dns_resolver key is not available
  smb3: fix caching of ctime on setxattr
  smb3: minor cleanup of session handling code
  cifs: reconnect work should have reference on server struct
  cifs: do not pass cifs_sb when trying to add channels
  cifs: account for primary channel in the interface list
  cifs: distribute channels across interfaces based on speed
  cifs: handle cases where a channel is closed
  smb3: more minor cleanups for session handling routines
  smb3: minor RDMA cleanup
  cifs: Fix encryption of cleared, but unset rq_iter data buffers