- 13 Feb, 2023 3 commits
-
-
Miko Larsson authored
syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ Fixes: d4026123 ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com Signed-off-by: Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hangyu Hua authored
old_meter needs to be free after it is detached regardless of whether the new meter is successfully attached. Fixes: c7c4c44c ("net: openvswitch: expand the meters supported number") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hyunwoo Kim authored
Since x->encap of pfkey_msg2xfrm_state() is not initialized to 0, kernel heap data can be leaked. Fix with kzalloc() to prevent this. Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Feb, 2023 8 commits
-
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== sk->sk_forward_alloc fixes. The first patch fixes a negative sk_forward_alloc by adding sk_rmem_schedule() before skb_set_owner_r(), and second patch removes an unnecessary WARN_ON_ONCE(). v2: https://lore.kernel.org/netdev/20230209013329.87879-1-kuniyu@amazon.com/ v1: https://lore.kernel.org/netdev/20230207183718.54520-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20230210002202.81442-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Christoph Paasch reported that commit b5fc2923 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues(). [0 - 2] Also, we can reproduce it by a program in [3]. In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy() to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in inet_csk_destroy_sock(). The same check has been in inet_sock_destruct() from at least v2.6, we can just remove the WARN_ON_ONCE(). However, among the users of sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct(). Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor(). [0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/ [1]: https://github.com/multipath-tcp/mptcp_net-next/issues/341 [2]: WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0 Modules linked in: CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9 RSP: 0018:ffff88810570fc68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005 RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488 R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458 FS: 00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0 Call Trace: <TASK> inet_csk_destroy_sock+0x1a1/0x320 __tcp_close+0xab6/0xe90 tcp_close+0x30/0xc0 inet_release+0xe9/0x1f0 inet6_release+0x4c/0x70 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7fdf7ae28d Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000 R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8 </TASK> [3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/ Fixes: b5fc2923 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Christoph Paasch <christophpaasch@icloud.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
Eric Dumazet pointed out [0] that when we call skb_set_owner_r() for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called, resulting in a negative sk_forward_alloc. We add a new helper which clones a skb and sets its owner only when sk_rmem_schedule() succeeds. Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv() because tcp_send_synack() can make sk_forward_alloc negative before ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases. [0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/ Fixes: 323fbd0e ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()") Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Natalia Petrova authored
The result of nlmsg_find_attr() 'br_spec' is dereferenced in nla_for_each_nested(), but it can take NULL value in nla_find() function, which will result in an error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 51616018 ("i40e: Add support for getlink, setlink ndo ops") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209172833.3596034-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Larysa Zaremba authored
Incrementation of xsk_frames inside the for-loop produces infinite loop, if we have both normal AF_XDP-TX and XDP_TXed buffers to complete. Split xsk_frames into 2 variables (xsk_frames and completed_frames) to eliminate this bug. Fixes: 29322791 ("ice: xsk: change batched Tx descriptor cleaning") Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230209160130.1779890-1-larysa.zaremba@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pedro Tammela authored
The imperfect hash area can be updated while packets are traversing, which will cause a use-after-free when 'tcf_exts_exec()' is called with the destroyed tcf_ext. CPU 0: CPU 1: tcindex_set_parms tcindex_classify tcindex_lookup tcindex_lookup tcf_exts_change tcf_exts_exec [UAF] Stop operating on the shared area directly, by using a local copy, and update the filter with 'rcu_replace_pointer()'. Delete the old filter version only after a rcu grace period elapsed. Fixes: 9b0d4446 ("net: sched: avoid atomic swap in tcf_exts_change") Reported-by: valis <sec@valis.email> Suggested-by: valis <sec@valis.email> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230209143739.279867-1-pctammela@mojatatu.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pietro Borrello authored
Use list_is_first() to check whether tsp->asoc matches the first element of ep->asocs, as the list is not guaranteed to have an entry. Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230208-sctp-filter-v2-1-6e1f4017f326@diag.uniroma1.itSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Siddharth Vadapalli authored
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an interrupt. The process of servicing this interrupt involves flushing all pending RX DMA descriptors and clearing the teardown completion marker (TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX NAPI callback services the interrupt. Thus, it is necessary to wait for this handler to run, drain all packets and clear TDCM, before calling napi_disable() in am65_cpsw_nuss_common_stop() function post channel teardown. If napi_disable() executes before ensuring that TDCM is cleared, the TDCM remains set when the interfaces are down, resulting in an interrupt storm when the interfaces are brought up again. Since the interrupt raised to indicate the RX DMA Channel teardown is specific to the AM62x and AM64x SoCs, add a quirk for it. Fixes: 4f7cce27 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g") Co-developed-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 10 Feb, 2023 10 commits
-
-
Ronak Doshi authored
Commit b3973bb4 ("vmxnet3: set correct hash type based on rss information") added hashType information into skb. However, rssType field is populated for eop descriptor. This can lead to incorrectly reporting of hashType for packets which use multiple rx descriptors. Multiple rx descriptors are used for Jumbo frame or LRO packets, which can hit this issue. This patch moves the RSS codeblock under eop descritor. Cc: stable@vger.kernel.org Fixes: b3973bb4 ("vmxnet3: set correct hash type based on rss information") Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Peng Li <lpeng@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
syzbot was able to trigger a warning [1] from net_free() calling ref_tracker_dir_exit(&net->notrefcnt_tracker) while the corresponding ref_tracker_dir_init() has not been done yet. copy_net_ns() can indeed bypass the call to setup_net() in some error conditions. Note: We might factorize/move more code in preinit_net() in the future. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 5817 Comm: syz-executor.3 Not tainted 6.2.0-rc7-next-20230208-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:982 [inline] register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295 __lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951 lock_acquire.part.0+0x11c/0x370 kernel/locking/lockdep.c:5691 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 ref_tracker_dir_exit+0x52/0x600 lib/ref_tracker.c:24 net_free net/core/net_namespace.c:442 [inline] net_free+0x98/0xd0 net/core/net_namespace.c:436 copy_net_ns+0x4f3/0x6b0 net/core/net_namespace.c:493 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:228 ksys_unshare+0x449/0x920 kernel/fork.c:3205 __do_sys_unshare kernel/fork.c:3276 [inline] __se_sys_unshare kernel/fork.c:3274 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3274 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 Fixes: 0cafd77d ("net: add a refcount tracker for kernel sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230208182123.3821604-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Guillaume Nault says: ==================== ipv6: Fix socket connection with DSCP fib-rules. The "flowlabel" field of struct flowi6 is used to store both the actual flow label and the DS Field (or Traffic Class). However the .connect handlers of datagram and TCP sockets don't set the DS Field part when doing their route lookup. This breaks fib-rules that match on DSCP. ==================== Link: https://lore.kernel.org/r/cover.1675875519.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Add the fib_rule6_send and fib_rule4_send tests to verify that DSCP values are properly taken into account when UDP or TCP sockets try to connect(). Tests are done with nettest, which needs a new option to specify the DS Field value of the socket being tested. This new option is named '-Q', in reference to the similar option used by ping. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Take into account the IPV6_TCLASS socket option (DSCP) in tcp_v6_connect(). Otherwise fib6_rule_match() can't properly match the DSCP value, resulting in invalid route lookup. For example: ip route add unreachable table main 2001:db8::10/124 ip route add table 100 2001:db8::10/124 dev eth0 ip -6 rule add dsfield 0x04 table 100 echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04 Without this patch, socat fails at connect() time ("No route to host") because the fib-rule doesn't jump to table 100 and the lookup ends up being done in the main table. Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Guillaume Nault authored
Take into account the IPV6_TCLASS socket option (DSCP) in ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't properly match the DSCP value, resulting in invalid route lookup. For example: ip route add unreachable table main 2001:db8::10/124 ip route add table 100 2001:db8::10/124 dev eth0 ip -6 rule add dsfield 0x04 table 100 echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04 Without this patch, socat fails at connect() time ("No route to host") because the fib-rule doesn't jump to table 100 and the lookup ends up being done in the main table. Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Simon Horman says: ==================== nfp: fix schedule in atomic context when offloading sa Yinjun Zhang says: IPsec offloading callbacks may be called in atomic context, sleep is not allowed in the implementation. Now use workqueue mechanism to avoid this issue. Extend existing workqueue mechanism for multicast configuration only to universal use, so that all configuring through mailbox asynchoronously can utilize it. Also fix another two incorrect use of mailbox in IPsec: 1. Need lock for race condition when accessing mbox 2. Offset of mbox access should depends on tlv caps ==================== Link: https://lore.kernel.org/r/20230208102258.29639-1-simon.horman@corigine.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yinjun Zhang authored
IPsec offloading callbacks may be called in atomic context, sleep is not allowed in the implementation. Now use workqueue mechanism to avoid this issue. Extend existing workqueue mechanism for multicast configuration only to universal use, so that all configuring through mailbox asynchronously can utilize it. Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Yinjun Zhang authored
The mailbox configuration mechanism requires writing several registers, which shouldn't be interrupted, so need lock to avoid race condition. The base offset of mailbox configuration registers is not fixed, it depends on TLV caps read from application firmware. Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer") Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rafał Miłecki authored
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were incorrectly unified. Chip package values are not unique and cannot be checked independently. They are meaningful only in a context of a given chip. Packages BCM5358 and BCM47188 share the same value but then belong to different chips. Code unification resulted in treating BCM5358 as BCM47188 and broke its initialization. Link: https://github.com/openwrt/openwrt/issues/8278 Fixes: cb1b0f90 ("net: ethernet: bgmac: unify code of the same family") Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 09 Feb, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can and ipsec subtrees. Current release - regressions: - sched: fix off by one in htb_activate_prios() - eth: mana: fix accessing freed irq affinity_hint - eth: ice: fix out-of-bounds KASAN warning in virtchnl Current release - new code bugs: - eth: mtk_eth_soc: enable special tag when any MAC uses DSA Previous releases - always broken: - core: fix sk->sk_txrehash default - neigh: make sure used and confirmed times are valid - mptcp: be careful on subflow status propagation on errors - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr() - phylink: move phy_device_free() to correctly release phy device - eth: mlx5: - fix crash unsetting rx-vlan-filter in switchdev mode - fix hang on firmware reset - serialize module cleanup with reload and remove" * tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) selftests: forwarding: lib: quote the sysctl values net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used rds: rds_rm_zerocopy_callback() use list_first_entry() net: txgbe: Update support email address selftests: Fix failing VXLAN VNI filtering test selftests: mptcp: stop tests earlier selftests: mptcp: allow more slack for slow test-case mptcp: be careful on subflow status propagation on errors mptcp: fix locking for in-kernel listener creation mptcp: fix locking for setsockopt corner-case mptcp: do not wait for bare sockets' timeout net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0 nfp: ethtool: fix the bug of setting unsupported port speed txhash: fix sk->sk_txrehash default net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg() net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA net: sched: sch: Fix off by one in htb_activate_prios() igc: Add ndo_tx_timeout support net: mana: Fix accessing freed irq affinity_hint hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential infinite loop with a badly crafted HID device (Xin Zhao) - fix regression from 6.1 in USB logitech devices potentially making their mouse wheel not working (Bastien Nocera) - clean up in AMD sensors, which fixes a long time resume bug (Mario Limonciello) - few device small fixes and quirks * tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreen 29DF on HP HID: amd_sfh: if no sensors are enabled, clean up HID: logitech: Disable hi-res scrolling on USB HID: core: Fix deadloop in hid_apply_multiplier. HID: Ignore battery for Elan touchscreen on Asus TP420IA HID: elecom: add support for TrackBall 056E:011C
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifx fix from Steve French: "Small fix for use after free" * tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix use-after-free in rdata->read_into_pages()
-
Hangbin Liu authored
When set/restore sysctl value, we should quote the value as some keys may have multi values, e.g. net.ipv4.ping_group_range Fixes: f5ae5778 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
While running this selftest which usually passes: ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] if I start PTP timestamping then run it again (debug prints added by me), the unknown IPv6 MC traffic is seen by the CPU port even when it should have been dropped: ~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m ptp4l[225.410]: selected /dev/ptp1 as PTP clock [ 225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap [ 225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap [ 225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap [ 225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap [ 225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE ^C ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [FAIL] reception succeeded, but should have failed TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] The PGID_MCIPV6 is configured correctly to not flood to the CPU, I checked that. Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do that when it exists), packets are RX filtered again as they should be: ~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0 [ 218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap [ 218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap [ 218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap [ 218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap [ 218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap current settings: tx_type 1 rx_filter 12 new settings: tx_type 1 rx_filter 0 ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] So it's clear that something in the PTP RX trapping logic went wrong. Looking a bit at the code, I can see that there are 4 typos, which populate "ipv4" VCAP IS2 key filter fields for IPv6 keys. VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at &filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6. Simply put, when we populate the wrong key field, &filter->key.ipv6 fields "proto.mask" and "proto.value" remain all zeroes (or "don't care"). So is2_entry_set() will enter the "else" of this "if" condition: if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP)) and proceed to ignore the "proto" field. The resulting rule will match on all IPv6 traffic, trapping it to the CPU. This is the reason why the local_termination.sh selftest sees it, because control traps are stronger than the PGID_MCIPV6 used for flooding (from the forwarding data path). But the problem is in fact much deeper. We trap all IPv6 traffic to the CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software forwarding will not take place and IPv6 traffic will never reach its destination. The fix is simple - correct the typos. I was intentionally inaccurate in the commit message about the breakage occurring when any PTP timestamping is enabled. In fact it only happens when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT. I wanted people skimming through git logs to not think that the bug doesn't affect them because they only use ptp4l in L2 mode. Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230207183117.1745754-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
Pietro Borrello authored
rds_rm_zerocopy_callback() uses list_entry() on the head of a list causing a type confusion. Use list_first_entry() to actually access the first element of the rs_zcookie_queue list. Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification") Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230202-rds-zerocopy-v3-1-83b0df974f9a@diag.uniroma1.itSigned-off-by: Paolo Abeni <pabeni@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== ipsec 2023-02-08 1) Fix policy checks for nested IPsec tunnels when using xfrm interfaces. From Benedict Wong. 2) Fix netlink message expression on 32=>64-bit messages translators. From Anastasia Belova. 3) Prevent potential spectre v1 gadget in xfrm_xlate32_attr. From Eric Dumazet. 4) Always consistently use time64_t in xfrm_timer_handler. From Eric Dumazet. 5) Fix KCSAN reported bug: Multiple cpus can update use_time at the same time. From Eric Dumazet. 6) Fix SCP copy from IPv4 to IPv6 on interfamily tunnel. From Christian Hopps. * tag 'ipsec-2023-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: fix bug with DSCP copy to v6 from v4 tunnel xfrm: annotate data-race around use_time xfrm: consistently use time64_t in xfrm_timer_handler() xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr() xfrm: compat: change expression for switch in xfrm_xlate64 Fix XFRM-I support for nested ESP tunnels ==================== Link: https://lore.kernel.org/r/20230208114322.266510-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jiawen Wu authored
Update new email address for Wangxun 10Gb NIC support team. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20230208023035.3371250-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-02-07 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Serialize module cleanup with reload and remove net/mlx5: fw_tracer, Zero consumer index when reloading the tracer net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffers net/mlx5: Expose SF firmware pages counter net/mlx5: Store page counters in a single array net/mlx5e: IPoIB, Show unknown speed instead of error net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev mode net/mlx5: Bridge, fix ageing of peer FDB entries net/mlx5: DR, Fix potential race in dr_rule_create_rule_nic net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag change ==================== Link: https://lore.kernel.org/r/20230208030302.95378-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
iproute2 does not recognize the "group6" and "remote6" keywords. Fix by using "group" and "remote" instead. Before: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 25 Tests failed: 2 After: # ./test_vxlan_vnifiltering.sh [...] Tests passed: 27 Tests failed: 0 Fixes: 3edf5f66 ("selftests: add new tests for vxlan vnifiltering") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230207141819.256689-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 08 Feb, 2023 9 commits
-
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: fixes for v6.2 Patch 1 clears resources earlier if there is no more reasons to keep MPTCP sockets alive. Patches 2 and 3 fix some locking issues visible in some rare corner cases: the linked issues should be quite hard to reproduce. Patch 4 makes sure subflows are correctly cleaned after the end of a connection. Patch 5 and 6 improve the selftests stability when running in a slow environment by transfering data for a longer period on one hand and by stopping the tests when all expected events have been observed on the other hand. All these patches fix issues introduced before v6.2. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthieu Baerts authored
These 'endpoint' tests from 'mptcp_join.sh' selftest start a transfer in the background and check the status during this transfer. Once the expected events have been recorded, there is no reason to wait for the data transfer to finish. It can be stopped earlier to reduce the execution time by more than half. For these tests, the exchanged data were not verified. Errors, if any, were ignored but that's fine, plenty of other tests are looking at that. It is then OK to mute stderr now that we are sure errors will be printed (and still ignored) because the transfer is stopped before the end. Fixes: e274f715 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
A test-case is frequently failing on some extremely slow VMs. The mptcp transfer completes before the script is able to do all the required PM manipulation. Address the issue in the simplest possible way, making the transfer even more slow. Additionally dump more info in case of failures, to help debugging similar problems in the future and init dump_stats var. Fixes: e274f715 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/323Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently the subflow error report callback unconditionally propagates the fallback subflow status to the owning msk. If the msk is already orphaned, the above prevents the code from correctly tracking the msk moving to the TCP_CLOSE state and doing the appropriate cleanup. All the above causes increasing memory usage over time and sporadic self-tests failures. There is a great deal of infrastructure trying to propagate correctly the fallback subflow status to the owning mptcp socket, e.g. via mptcp_subflow_eof() and subflow_sched_work_if_closed(): in the error propagation path we need only to cope with unorphaned sockets. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/339 Fixes: 15cc1045 ("mptcp: deliver ssk errors to msk") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
For consistency, in mptcp_pm_nl_create_listen_socket(), we need to call the __mptcp_nmpc_socket() under the msk socket lock. Note that as a side effect, mptcp_subflow_create_socket() needs a 'nested' lockdep annotation, as it will acquire the subflow (kernel) socket lock under the in-kernel listener msk socket lock. The current lack of locking is almost harmless, because the relevant socket is not exposed to the user space, but in future we will add more complexity to the mentioned helper, let's play safe. Fixes: 1729cf18 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
We need to call the __mptcp_nmpc_socket(), and later subflow socket access under the msk socket lock, or e.g. a racing connect() could change the socket status under the hood, with unexpected results. Fixes: 54635bd0 ("mptcp: add TCP_FASTOPEN_CONNECT socket option") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If the peer closes all the existing subflows for a given mptcp socket and later the application closes it, the current implementation let it survive until the timewait timeout expires. While the above is allowed by the protocol specification it consumes resources for almost no reason and additionally causes sporadic self-tests failures. Let's move the mptcp socket to the TCP_CLOSE state when there are no alive subflows at close time, so that the allocated resources will be freed immediately. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Arınç reports that on his MT7621AT Unielec U7621-06 board and MT7623NI Bananapi BPI-R2, packets received by the CPU over mt7530 switch port 0 (of which this driver acts as the DSA master) are not processed correctly by software. More precisely, they arrive without a DSA tag (in packet or in the hwaccel area - skb_metadata_dst()), so DSA cannot demux them towards the switch's interface for port 0. Traffic from other ports receives a skb_metadata_dst() with the correct port and is demuxed properly. Looking at mtk_poll_rx(), it becomes apparent that this driver uses the skb vlan hwaccel area: union { u32 vlan_all; struct { __be16 vlan_proto; __u16 vlan_tci; }; }; as a temporary storage for the VLAN hwaccel tag, or the DSA hwaccel tag. If this is a DSA master it's a DSA hwaccel tag, and finally clears up the skb VLAN hwaccel header. I'm guessing that the problem is the (mis)use of API. skb_vlan_tag_present() looks like this: #define skb_vlan_tag_present(__skb) (!!(__skb)->vlan_all) So if both vlan_proto and vlan_tci are zeroes, skb_vlan_tag_present() returns precisely false. I don't know for sure what is the format of the DSA hwaccel tag, but I surely know that lowermost 3 bits of vlan_proto are 0 when receiving from port 0: unsigned int port = vlan_proto & GENMASK(2, 0); If the RX descriptor has no other bits set to non-zero values in RX_DMA_VTAG, then the call to __vlan_hwaccel_put_tag() will not, in fact, make the subsequent skb_vlan_tag_present() return true, because it's implemented like this: static inline void __vlan_hwaccel_put_tag(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) { skb->vlan_proto = vlan_proto; skb->vlan_tci = vlan_tci; } What we need to do to fix this problem (assuming this is the problem) is to stop using skb->vlan_all as temporary storage for driver affairs, and just create some local variables that serve the same purpose, but hopefully better. Instead of calling skb_vlan_tag_present(), let's look at a boolean has_hwaccel_tag which we set to true when the RX DMA descriptors have something. Disambiguate based on netdev_uses_dsa() whether this is a VLAN or DSA hwaccel tag, and only call __vlan_hwaccel_put_tag() if we're certain it's a VLAN tag. Arınç confirms that the treatment works, so this validates the assumption. Link: https://lore.kernel.org/netdev/704f3a72-fc9e-714a-db54-272e17612637@arinc9.com/ Fixes: 2d7605a7 ("net: ethernet: mtk_eth_soc: enable hardware DSA untagging") Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yu Xiao authored
Unsupported port speed can be set and cause error. Now fixing it and return an error if setting unsupported speed. This fix depends on the following, which was included in v6.2-rc1: commit a61474c4 ("nfp: ethtool: support reporting link modes"). Fixes: 7c698737 ("nfp: add support for .set_link_ksettings()") Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-