Pull USB updates from Greg KH:
 "Here is the big set of USB patches for 5.4-rc1.

  Two major chunks of code are moving out of the tree and into the
  staging directory, uwb and wusb (wireless USB support), because there
  are no devices that actually use this protocol anymore, and what we
  have today probably doesn't work at all given that the maintainers
  left many many years ago. So move it to staging where it will be
  removed in a few releases if no one screams.

  Other than that, lots of little things. The usual gadget and xhci and
  usb serial driver updates, along with a bunch of sysfs file cleanups
  due to the driver core changes to support that. Nothing really major,
  just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits)
  USB: usbcore: Fix slab-out-of-bounds bug during device reset
  usb: cdns3: Remove redundant dev_err call in cdns3_probe()
  USB: rio500: Fix lockdep violation
  USB: rio500: simplify locking
  usb: mtu3: register a USB Role Switch for dual role mode
  usb: common: add USB GPIO based connection detection driver
  usb: common: create Kconfig file
  usb: roles: get usb-role-switch from parent
  usb: roles: Add fwnode_usb_role_switch_get() function
  device connection: Add fwnode_connection_find_match()
  usb: roles: Introduce stubs for the exiting functions in role.h
  dt-bindings: usb: mtu3: add properties about USB Role Switch
  dt-bindings: usb: add binding for USB GPIO based connection detection driver
  dt-bindings: connector: add optional properties for Type-B
  dt-binding: usb: add usb-role-switch property
  usbip: Implement SG support to vhci-hcd and stub driver
  usb: roles: intel: Enable static DRD mode for role switch
  xhci-ext-caps.c: Add property to disable Intel SW switch
  usb: dwc3: remove generic PHY calibrate() calls
  usb: core: phy: add support for PHY calibration
  ...

Pull driver core updates from Greg Kroah-Hartman:
 "Here is the big driver core update for 5.4-rc1.

  There was a bit of a churn in here, with a number of core and OF
  platform patches being added to the tree, and then after much
  discussion and review and a day-long in-person meeting, they were
  decided to be reverted and a new set of patches is currently being
  reviewed on the mailing list.

  Other than that churn, there are two "persistent" branches in here
  that other trees will be pulling in as well during the merge window.
  One branch to add support for drivers to have the driver core
  automatically add sysfs attribute files when a driver is bound to a
  device so that the driver doesn't have to manually do it (and then
  clean it up, as it always gets it wrong).

  There's another branch in here for generic lookup helpers for the
  driver core that lots of busses are starting to use. That's the
  majority of the non-driver-core changes in this patch series.

  There's also some on-going debugfs file creation cleanup that has been
  slowly happening over the past few releases, with the goal to
  hopefully get that done sometime next year.

  All of these have been in linux-next for a while now with no reported
  issues"

[ Note that the above-mentioned generic lookup helpers branch was
  already brought in by the LED merge (commit 4feaab05) that had
  shared it.

  Also note that that common branch introduced an i2c bug due to a bad
  conversion, which got fixed here. - Linus ]

* tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits)
  coccinelle: platform_get_irq: Fix parse error
  driver-core: add include guard to linux/container.h
  sysfs: add BIN_ATTR_WO() macro
  driver core: platform: Export platform_get_irq_optional()
  hwmon: pwm-fan: Use platform_get_irq_optional()
  driver core: platform: Introduce platform_get_irq_optional()
  Revert "driver core: Add support for linking devices during device addition"
  Revert "driver core: Add edit_links() callback for drivers"
  Revert "of/platform: Add functional dependency link from DT bindings"
  Revert "driver core: Add sync_state driver/bus callback"
  Revert "of/platform: Pause/resume sync state during init and of_platform_populate()"
  Revert "of/platform: Create device links for all child-supplier depencencies"
  Revert "of/platform: Don't create device links for default busses"
  Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()"
  Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning"
  Revert "of/platform: Disable generic device linking code for PowerPC"
  devcoredump: fix typo in comment
  devcoredump: use memory_read_from_buffer
  of/platform: Disable generic device linking code for PowerPC
  device.h: Fix warnings for mismatched parameter names in comments
  ...

Pull KVM updates from Paolo Bonzini:
 "s390:
   - ioctl hardening
   - selftests

  ARM:
   - ITS translation cache
   - support for 512 vCPUs
   - various cleanups and bugfixes

  PPC:
   - various minor fixes and preparation

  x86:
   - bugfixes all over the place (posted interrupts, SVM, emulation
     corner cases, blocked INIT)
   - some IPI optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
  KVM: X86: Use IPI shorthands in kvm guest when support
  KVM: x86: Fix INIT signal handling in various CPU states
  KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
  KVM: VMX: Stop the preemption timer during vCPU reset
  KVM: LAPIC: Micro optimize IPI latency
  kvm: Nested KVM MMUs need PAE root too
  KVM: x86: set ctxt->have_exception in x86_decode_insn()
  KVM: x86: always stop emulation on page fault
  KVM: nVMX: trace nested VM-Enter failures detected by H/W
  KVM: nVMX: add tracepoint for failed nested VM-Enter
  x86: KVM: svm: Fix a check in nested_svm_vmrun()
  KVM: x86: Return to userspace with internal error on unexpected exit reason
  KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
  KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
  doc: kvm: Fix return description of KVM_SET_MSRS
  KVM: X86: Tune PLE Window tracepoint
  KVM: VMX: Change ple_window type to unsigned int
  KVM: X86: Remove tailing newline for tracepoints
  KVM: X86: Trace vcpu_id for vmexit
  KVM: x86: Manually calculate reserved bits when loading PDPTRS
  ...

Pull KVM fix from Paolo Bonzini:
 "Fix missing bounds-checking in coalesced_mmio (CVE-2019-14821)"

* tag 'for-linus-urgent' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: coalesced_mmio: add bounds checking

The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result.  This change sanity checks the index
before using it for writing to a potentially arbitrary address.

This fixes CVE-2019-14821.

Cc: stable@vger.kernel.org
Fixes: 5f94c174 ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull device properties framework updates from Rafael Wysocki:
 "Improve software node support (Heikki Krogerus) and clean up two
  assorted pieces of code (Andy Shevchenko, Geert Uytterhoeven)"

* tag 'devprop-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: Initialize the return value in software_node_find_by_name()
  software node: Initialize the return value in software_node_to_swnode()
  ACPI / property: Fix acpi_graph_get_remote_endpoint() name in kerneldoc
  device property: Remove duplicate test for NULL
  platform/x86: intel_cht_int33fe: Use new API to gain access to the role switch
  usb: roles: intel_xhci: Supplying software node for the role mux
  software node: Add software_node_find_by_name()

Pull ACPI updates from Rafael Wysocki:
 "These include an ACPICA update (to upstream revision 20190816),
  improvements of support for memory hot-add in the HMAT handling code
  and some assorted fixes and cleanups.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20190816
     including:
      * Internal limits change to support larger systems (Bob Moore).
      * Macros clean up (Bob Moore).
      * printf format string fixes (Bob Moore).
      * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore).
      * Tools improvements (Bob Moore, Colin Ian King).
      * Windows _OSI support fixes (Jung-uk Kim).

   - Improve memory hot-add support in the ACPI HMAT handling code (Dan
     Williams, Keith Busch).

   - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to
     save and restore private registers during system-wide suspend and
     resume on systems with the Lynxpoint PCH (Jarkko Nikula).

   - Convert the ACPI documentation related to LEDs to ReST (Sakari
     Ailus).

   - Fix assorted issues and make assorted minor improvements in the
     ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey
     Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang,
     YueHaibing)"

* tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  ACPI / PCI: fix acpi_pci_irq_enable() memory leak
  ACPI: custom_method: fix memory leaks
  ACPI: thermal: Remove redundant acpi_has_method() calls
  ACPI / CPPC: do not require the _PSD method
  ACPI: SBS: remove unused const variable 'SMBUS_PEC'
  ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint
  ACPI/PCI: Remove surplus parentheses from a return statement
  ACPICA: Update version to 20190816.
  ACPICA: Add "Windows 2019" string to _OSI support.
  ACPICA: Differentiate Windows 8.1 from Windows 8.
  ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
  ACPICA: iASL,acpi_dump: Improve y/n query
  ACPICA: Fix issues with arg types within printf format strings
  ACPICA: Macros: remove pointer math on a null pointer
  ACPICA: Increase total number of possible Owner IDs
  ACPICA: Debugger: remove redundant assignment on obj_desc
  Documentation: ACPI: DSD: Convert LED documentation to ReST
  ACPI / APEI: Release resources if gen_pool_add() fails
  HMAT: Skip publishing target info for nodes with no online memory
  HMAT: Register attributes for memory hot add
  ...

Pull power management updates from Rafael Wysocki:
 "These include a rework of the main suspend-to-idle code flow (related
  to the handling of spurious wakeups), a switch over of several users
  of cpufreq notifiers to QoS-based limits, a new devfreq driver for
  Tegra20, a new cpuidle driver and governor for virtualized guests, an
  extension of the wakeup sources framework to expose wakeup sources as
  device objects in sysfs, and more.

  Specifics:

   - Rework the main suspend-to-idle control flow to avoid repeating
     "noirq" device resume and suspend operations in case of spurious
     wakeups from the ACPI EC and decouple the ACPI EC wakeups support
     from the LPS0 _DSM support (Rafael Wysocki).

   - Extend the wakeup sources framework to expose wakeup sources as
     device objects in sysfs (Tri Vo, Stephen Boyd).

   - Expose system suspend statistics in sysfs (Kalesh Singh).

   - Introduce a new haltpoll cpuidle driver and a new matching governor
     for virtualized guests wanting to do guest-side polling in the idle
     loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell).

   - Fix the menu and teo cpuidle governors to allow the scheduler tick
     to be stopped if PM QoS is used to limit the CPU idle state exit
     latency in some cases (Rafael Wysocki).

   - Increase the resolution of the play_idle() argument to microseconds
     for more fine-grained injection of CPU idle cycles (Daniel
     Lezcano).

   - Switch over some users of cpuidle notifiers to the new QoS-based
     frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY
     policy notifier events (Viresh Kumar).

   - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li).

   - Add support for MT8183 and MT8516 to the mediatek cpufreq driver
     (Andrew-sh.Cheng, Fabien Parent).

   - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
     Huang).

   - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz).

   - Update the qcom cpufreq driver (among other things, to make it
     easier to extend and to use kryo cpufreq for other nvmem-based
     SoCs) and add qcs404 support to it (Niklas Cassel, Douglas
     RAILLARD, Sibi Sankar, Sricharan R).

   - Fix assorted issues and make assorted minor improvements in the
     cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli,
     Gustavo Silva, Hariprasad Kelam).

   - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd
     Bergmann).

   - Add new Exynos PPMU events to devfreq events and extend that
     mechanism (Lukasz Luba).

   - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny).

   - Improve devfreq documentation and governor code, fix spelling typos
     in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez,
     MyungJoo Ham, Gaël PORTAY).

   - Add regulators enable and disable to the OPP (operating performance
     points) framework (Kamil Konieczny).

   - Update the OPP framework to support multiple opp-suspend properties
     (Anson Huang).

   - Fix assorted issues and make assorted minor improvements in the OPP
     code (Niklas Cassel, Viresh Kumar, Yue Hu).

   - Clean up the generic power domains (genpd) framework (Ulf Hansson).

   - Clean up assorted pieces of power management code and documentation
     (Akinobu Mita, Amit Kucheria, Chuhong Yuan).

   - Update the pm-graph tool to version 5.5 including multiple fixes
     and improvements (Todd Brandt).

   - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven,
     Sébastien Szymanski)"

* tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits)
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  PM: runtime: Documentation: add runtime_status ABI document
  pm-graph: make setVal unbuffered again for python2 and python3
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  ...

Pull dmaengine updates from Vinod Koul:

 - Move Dmaengine DT bindings to YAML and convert Allwinner to schema.

 - FSL dma device_synchronize implementation

 - DW split acpi and of helpers and updates to driver and support for
   Elkhart Lake

 - Move filter fn as private for omap-dma and edma drivers and
   improvements to these drivers

 - Mark expected switch fall-through in couple of drivers

 - Renames of shdma and nbpfaxi binding document

 - Minor updates to bunch of drivers

* tag 'dmaengine-5.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (55 commits)
  dmaengine: ti: edma: Use bitmap_set() instead of open coded edma_set_bits()
  dmaengine: ti: edma: Only reset region0 access registers
  dmaengine: ti: edma: Do not reset reserved paRAM slots
  dmaengine: iop-adma.c: fix printk format warning
  dmaengine: stm32-dma: Use struct_size() helper
  dt-bindings: dmaengine: dma-common: Fix the dma-channel-mask property
  dmanegine: ioat/dca: Use struct_size() helper
  dmaengine: iop-adma: remove set but not used variable 'slots_per_op'
  dmaengine: dmatest: Add support for completion polling
  dmaengine: ti: omap-dma: Remove variable override in omap_dma_tx_status()
  dmaengine: ti: omap-dma: Remove 'Assignment in if condition'
  dmaengine: ti: edma: Remove 'Assignment in if condition'
  dmaengine: dw: platform: Split OF helpers to separate module
  dmaengine: dw: platform: Split ACPI helpers to separate module
  dmaengine: dw: platform: Move handle check to dw_dma_acpi_controller_register()
  dmaengine: dw: platform: Switch to acpi_dma_controller_register()
  dmaengine: dw: platform: Use devm_platform_ioremap_resource()
  dmaengine: dw: platform: Enable iDMA 32-bit on Intel Elkhart Lake
  dmaengine: dw: platform: Use struct dw_dma_chip_pdata
  dmaengine: dw: Export struct dw_dma_chip_pdata for wider use
  ...

Merge tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "In this cycle we've finally managed to contribute the patch set
  sorting out LED naming issues. Besides that there are many changes
  scattered among various LED class drivers and triggers.

  LED naming related improvements:

   - add new 'function' and 'color' fwnode properties and deprecate
     'label' property which has been frequently abused for conveying
     vendor specific names that have been available in sysfs anyway

   - introduce a set of standard LED_FUNCTION* definitions

   - introduce a set of standard LED_COLOR_ID* definitions

   - add a new {devm_}led_classdev_register_ext() API with the
     capability of automatic LED name composition basing on the
     properties available in the passed fwnode; the function is
     backwards compatible in a sense that it uses 'label' data, if
     present in the fwnode, for creating LED name

   - add tools/leds/get_led_device_info.sh script for retrieving LED
     vendor, product and bus names, if applicable; it also performs
     basic validation of an LED name

   - update following drivers and their DT bindings to use the new LED
     registration API:

        - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
          leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt

  Other LED class improvements:

   - replace {devm_}led_classdev_register() macros with inlines

   - allow to call led_classdev_unregister() unconditionally

   - switch to use fwnode instead of be stuck with OF one

  LED triggers improvements:

   - led-triggers:
        - fix dereferencing of null pointer
        - fix a memory leak bug

   - ledtrig-gpio:
        - GPIO 0 is valid

  Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
  more complete driver exists, based on a generic driver for the AMD
  SOCs gpio-controller, supporting LEDs as well other devices:

   - drop profile field from priv data

   - drop iosize field from priv data

   - drop enum_apu_led_platform_types

   - drop superseeded apu2/3 led support

   - add pr_fmt prefix for better log output

   - fix error message on probing failure

  Other misc fixes and improvements to existing LED class drivers:

   - leds-ns2, leds-max77650:
        - add of_node_put() before return

   - leds-pwm, leds-is31fl32xx:
        - use struct_size() helper

   - leds-lm3697, leds-lm36274, leds-lm3532:
        - switch to use fwnode_property_count_uXX()

   - leds-lm3532:
        - fix brightness control for i2c mode
        - change the define for the fs current register
        - fixes for the driver for stability
        - add full scale current configuration
        - dt: Add property for full scale current.
        - avoid potentially unpaired regulator calls
        - move static keyword to the front of declarations
        - fix optional led-max-microamp prop error handling

   - leds-max77650:
        - add of_node_put() before return
        - add MODULE_ALIAS()
        - Switch to fwnode property API

   - leds-as3645a:
        - fix misuse of strlcpy

   - leds-netxbig:
        - add of_node_put() in netxbig_leds_get_of_pdata()
        - remove legacy board-file support

   - leds-is31fl319x:
        - simplify getting the adapter of a client

   - leds-ti-lmu-common:
        - fix coccinelle issue
        - move static keyword to the front of declaration

   - leds-syscon:
        - use resource managed variant of device register

   - leds-ktd2692:
        - fix a typo in the name of a constant

   - leds-lp5562:
        - allow firmware files up to the maximum length

   - leds-an30259a:
        - fix typo

   - leds-pca953x:
        - include the right header"

* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
  leds: lm3532: Fix optional led-max-microamp prop error handling
  led: triggers: Fix dereferencing of null pointer
  leds: ti-lmu-common: Move static keyword to the front of declaration
  leds: lm3532: Move static keyword to the front of declarations
  leds: trigger: gpio: GPIO 0 is valid
  leds: pwm: Use struct_size() helper
  leds: is31fl32xx: Use struct_size() helper
  leds: ti-lmu-common: Fix coccinelle issue in TI LMU
  leds: lm3532: Avoid potentially unpaired regulator calls
  leds: syscon: Use resource managed variant of device register
  leds: Replace {devm_}led_classdev_register() macros with inlines
  leds: Allow to call led_classdev_unregister() unconditionally
  leds: lm3532: Add full scale current configuration
  dt: lm3532: Add property for full scale current.
  leds: lm3532: Fixes for the driver for stability
  leds: lm3532: Change the define for the fs current register
  leds: lm3532: Fix brightness control for i2c mode
  leds: Switch to use fwnode instead of be stuck with OF one
  leds: max77650: Switch to fwnode property API
  led: triggers: Fix a memory leak bug
  ...

Pull media updates from Mauro Carvalho Chehab:

 - a new sensor driver for ov5675

 - a new platform driver for Allwinner A10 sensor interface

 - some new remote controller keymaps

 - some cosmetic changes at V4L2 core in order to avoid #ifdefs and to
   merge two core modules into one

 - removal of bcm2048 radio driver from staging

 - removal of davinci_vpfe video driver from staging

 - regression fix since Kernel 5.1 at the legacy VideoBuffer version 1
   core

 - added some documentation for remote controller protocols

 - pixel format documentation was split on two files

 - lots of other driver improvements and cleanups

* tag 'media/v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (321 commits)
  media: videobuf-core.c: poll_wait needs a non-NULL buf pointer
  media: sun4i: Make sun4i_csi_formats static
  media: imx: remove unused including <linux/version.h>
  media: stm32-dcmi: Delete an unnecessary of_node_put() call in dcmi_probe()
  media: pvrusb2: qctrl.flag will be uninitlaized if cx2341x_ctrl_query() returns error code
  media: em28xx: Fix exception handling in em28xx_alloc_urbs()
  media: don't do a 31 bit shift on a signed int
  media: use the BIT() macro
  media: ov9650: add a sanity check
  media: aspeed-video: address a protential usage of an unitialized var
  media: vicodec: make life easier for static analyzers
  media: remove include stdarg.h from some drivers
  v4l2-core: fix coding style for the two new c files
  media: v4l2-core: Remove BUG() from i2c and spi helpers
  media: v4l2-core: introduce a helper to unregister a i2c subdev
  media: v4l2-core: introduce a helper to unregister a spi subdev
  media: v4l2-core: move i2c helpers out of v4l2-common.c
  media: v4l2-core: move spi helpers out of v4l2-common.c
  media: v4l2-core: Module re-organization
  media: usbvision: Remove dead code
  ...

Pull sound updates from Takashi Iwai:
 "As shown in diffstat and logs, it was again a busy development cycle
  at this time, too. The most significant changes are still on-going
  refactoring / modernization works for ASoC core and drivers, but there
  are lots of other changes as well. Here we go, some highlights below:

  ASoC:

   - Quite a lot of cleanup / refactoring of ASoC core and APIs; most of
     them are systematic, but also including cleanups and modernization

   - A bulk of updates for some ASoC platforms, Freescale, sunxi and
     Intel SST/SOF

   - Initial support for Sound Open Firmware on i.MX8

   - Removal of deprecated w90x900 and nuc900 drivers

   - New support for Cirrus Logic CS47L15 and CS47L92, Freescale i.MX
     7ULP and 8MQ, Meson G12A and NXP UDA1334

  USB-audio:

   - More validations of descriptor units for hardening against bugs
     reported by fuzzers

   - PCM device assignment workaround for a past call-order change

   - Scarlett Gen2 mixer interface, a few more more quirks

  HD-audio:

   - Support for audio component with AMD/ATI and Nvidia HDMI codecs

   - Clean up HD-audio core and remove indirect access ops for Intel SOF

   - DMIC detection at probe; it would make systems automatically
     falling back to SST/SOF driver on devices that need DMIC handling.
     Needs a new Kconfig to set, and beware that it's still new and a
     bit experimental

  FireWire:

   - Lots of code refactoring and cleanups"

* tag 'sound-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (521 commits)
  ASoC: sdm845: remove unneeded semicolon
  ASoC: fsl_sai: Implement set_bclk_ratio
  ASoC: dmaengine: Replace strncpy() with strscpy_pad() for pcm->name
  ASoC: wcd9335: remove redundant use of ret variable
  ALSA: firewire-tascam: check intermediate state of clock status and retry
  ALSA: firewire-tascam: handle error code when getting current source of clock
  ASoC: hdmi-codec: Add an op to set callback function for plug event
  ASoC: rt5677: keep analog power register at SND_SOC_BIAS_OFF
  ASoC: rt5677: Remove magic number register writes
  ASoC: soc-core: self contained soc_unbind_aux_dev()
  ASoC: soc-core: add soc_unbind_aux_dev()
  ASoC: soc-core: self contained soc_bind_aux_dev()
  ASoC: soc-core: move soc_probe_link_dais() next to soc_remove_link_dais()
  ASoC: soc-core: self contained soc_probe_link_dais()
  ASoC: soc-core: add new soc_link_init()
  ASoC: soc-core: move soc_probe_dai() next to soc_remove_dai()
  ASoC: soc-core: self contained soc_remove_link_dais()
  ASoC: soc-core: self contained soc_remove_link_components()
  ASoC: soc-core: self contained soc_probe_link_components()
  ASoC: rt1308: make array pd static const, makes object smaller
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Fixup processing of SDIO IRQs during system suspend/resume
   - Add helper function to indicate if SDIO IRQs is enabled

  MMC host:
   - bcm2835: Take SWIOTLB memory size limitation into account
   - dw_mmc: Improve SDIO IRQs support
   - mtk-sd: Various improvements
   - mtk-sd: Improve SDIO IRQs support
   - sdhci-iproc: Add support for emmc2 of the BCM2711
   - sdhci-of-arasan: Add Support for Intel LGM eMMC
   - sdhci-of-aspeed: Add support for the ASPEED SD controller
   - sdhci-of-esdhc: Deal with erratum A011334 support in ls1028a 1.0 SoC
   - sdhci-pci: Prepare to add support of Genesys Logic GL975x
   - sdhci-pci: Add another Id for Intel CML
   - sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
   - sunxi: Add support for H5 compatibles"

* tag 'mmc-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  ms_block: fix spelling mistake "randomally" -> "randomly"
  mmc: dw_mmc: hi3798cv200: make array degrees static const, makes object smaller
  mmc: sdhci: Convert to use sdio_irq_claimed()
  mmc: sdhci: Drop redundant code for SDIO IRQs
  mmc: sdhci: Drop redundant check in sdhci_ack_sdio_irq()
  mmc: core: Fixup processing of SDIO IRQs during system suspend/resume
  mmc: core: WARN if SDIO IRQs are enabled for non-powered card in suspend
  mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory
  mmc: core: Clarify sdio_irq_pending flag for MMC_CAP2_SDIO_IRQ_NOTHREAD
  mmc: core: Move code to get pending SDIO IRQs to a function
  mmc: mtk-sd: Re-store SDIO IRQs mask at system resume
  mmc: dw_mmc: Re-store SDIO IRQs mask at system resume
  mmc: core: Add helper function to indicate if SDIO IRQs is enabled
  mmc: sdhci-pci-o2micro: Fix O2 Host data read/write DLL Lock phase shift issue
  mmc: sdhci-pci-o2micro: Move functions in preparation to fix DLL lock phase shift issue
  mmc: sdhci-pci-o2micro: Change O2 Host PLL and DLL register name
  mmc: sdhci: Fix incorrect switch to HS mode
  mmc: sdhci-of-aspeed: Depend on CONFIG_OF_ADDRESS
  mmc: sdhci-of-aspeed: Allow max-frequency limitation of SDCLK
  mmc: sdhci-of-aspeed: Uphold clocks-on post-condition of set_clock()
  ...

Pull block updates from Jens Axboe:

 - Two NVMe pull requests:
     - ana log parse fix from Anton
     - nvme quirks support for Apple devices from Ben
     - fix missing bio completion tracing for multipath stack devices
       from Hannes and Mikhail
     - IP TOS settings for nvme rdma and tcp transports from Israel
     - rq_dma_dir cleanups from Israel
     - tracing for Get LBA Status command from Minwoo
     - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself
     - Some consolidation between the fabrics transports for handling
       the CAP register
     - reset race with ns scanning fix for fabrics (move fabrics
       commands to a dedicated request queue with a different lifetime
       from the admin request queue)."
     - controller reset and namespace scan races fixes
     - nvme discovery log change uevent support
     - naming improvements from Keith
     - multiple discovery controllers reject fix from James
     - some regular cleanups from various people

 - Series fixing (and re-fixing) null_blk debug printing and nr_devices
   checks (André)

 - A few pull requests from Song, with fixes from Andy, Guoqing,
   Guilherme, Neil, Nigel, and Yufen.

 - REQ_OP_ZONE_RESET_ALL support (Chaitanya)

 - Bio merge handling unification (Christoph)

 - Pick default elevator correctly for devices with special needs
   (Damien)

 - Block stats fixes (Hou)

 - Timeout and support devices nbd fixes (Mike)

 - Series fixing races around elevator switching and device add/remove
   (Ming)

 - sed-opal cleanups (Revanth)

 - Per device weight support for BFQ (Fam)

 - Support for blk-iocost, a new model that can properly account cost of
   IO workloads. (Tejun)

 - blk-cgroup writeback fixes (Tejun)

 - paride queue init fixes (zhengbin)

 - blk_set_runtime_active() cleanup (Stanley)

 - Block segment mapping optimizations (Bart)

 - lightnvm fixes (Hans/Minwoo/YueHaibing)

 - Various little fixes and cleanups

* tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits)
  null_blk: format pr_* logs with pr_fmt
  null_blk: match the type of parameter nr_devices
  null_blk: do not fail the module load with zero devices
  block: also check RQF_STATS in blk_mq_need_time_stamp()
  block: make rq sector size accessible for block stats
  bfq: Fix bfq linkage error
  raid5: use bio_end_sector in r5_next_bio
  raid5: remove STRIPE_OPS_REQ_PENDING
  md: add feature flag MD_FEATURE_RAID0_LAYOUT
  md/raid0: avoid RAID0 data corruption due to layout confusion.
  raid5: don't set STRIPE_HANDLE to stripe which is in batch list
  raid5: don't increment read_errors on EILSEQ return
  nvmet: fix a wrong error status returned in error log page
  nvme: send discovery log page change events to userspace
  nvme: add uevent variables for controller devices
  nvme: enable aen regardless of the presence of I/O queues
  nvme-fabrics: allow discovery subsystems accept a kato
  nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery()
  nvme: Remove redundant assignment of cq vector
  nvme: Assign subsys instance from first ctrl
  ...

Pull libata updates from Jens Axboe:

 - Kill unused export (Andy)

 - Use dma_set_mask_and_coherent() throughout (Christoph)

 - Drop PCS quirk on Denverton, which has different register layout
   (Dan)

 - Support non-boot time detection for pata_buddha (Max)

* tag 'for-5.4/libata-2019-09-15' of git://git.kernel.dk/linux-block:
  libata/ahci: Drop PCS quirk for Denverton and beyond
  ahci: Do not export local variable ahci_em_messages
  libata: switch remaining drivers to use dma_set_mask_and_coherent
  sata_sil24: use dma_set_mask_and_coherent
  sata_qstor: use dma_set_mask_and_coherent
  sata_nv: use dma_set_mask_and_coherent
  sata_mv: use dma_set_mask_and_coherent
  pdc_adma: use dma_set_mask_and_coherent
  ahci: use dma_set_mask_and_coherent
  acard_ahci: use dma_set_mask_and_coherent
  ata/pata_buddha: Probe via modalias instead of initcall

Pull io_uring updates from Jens Axboe:

 - Allocate SQ/CQ ring together, more efficient. Expose this through a
   feature flag as well, so we can reduce the number of mmaps by 1
   (Hristo and me)

 - Fix for sequence logic with SQ thread (Jackie).

 - Add support for links with drain commands (Jackie).

 - Improved async merging (me)

 - Improved buffered async write performance (me)

 - Support SQ poll wakeup + event get in single io_uring_enter() (me)

 - Support larger SQ ring size. For epoll conversions, the 4k limit was
   too small for some prod workloads (Daniel).

 - put_user_page() usage (John)

* tag 'for-5.4/io_uring-2019-09-15' of git://git.kernel.dk/linux-block:
  io_uring: increase IORING_MAX_ENTRIES to 32K
  io_uring: make sqpoll wakeup possible with getevents
  io_uring: extend async work merging
  io_uring: limit parallelism of buffered writes
  io_uring: add io_queue_async_work() helper
  io_uring: optimize submit_and_wait API
  io_uring: add support for link with drain
  io_uring: fix wrong sequence setting logic
  io_uring: expose single mmap capability
  io_uring: allocate the two rings together
  fs/io_uring.c: convert put_page() to put_user_page*()

Pull documentation updates from Jonathan Corbet:
 "It's a somewhat calmer cycle for docs this time, as the churn of the
  mass RST conversion is happily mostly behind us.

   - A new document on reproducible builds.

   - We finally got around to zapping the documentation for hardware
     support that was removed in 2004; one doesn't want to rush these
     things.

   - The usual assortment of fixes, typo corrections, etc"

* tag 'docs-5.4' of git://git.lwn.net/linux: (67 commits)
  Documentation: kbuild: Add document about reproducible builds
  docs: printk-formats: Stop encouraging use of unnecessary %h[xudi] and %hh[xudi]
  Documentation: Add "earlycon=sbi" to the admin guide
  doc:lock: remove reference to clever use of read-write lock
  devices.txt: improve entry for comedi (char major 98)
  docs: mtd: Update spi nor reference driver
  doc: arm64: fix grammar dtb placed in no attributes region
  Documentation: sysrq: don't recommend 'S' 'U' before 'B'
  mailmap: Update email address for Quentin Perret
  docs: ftrace: clarify when tracing is disabled by the trace file
  docs: process: fix broken link
  Documentation/arm/samsung-s3c24xx: Remove stray U+FEFF character to fix title
  Documentation/arm/sa1100/assabet: Fix 'make assabet_defconfig' command
  Documentation/arm/sa1100: Remove some obsolete documentation
  docs/zh_CN: update Chinese howto.rst for latexdocs making
  Documentation: virt: Fix broken reference to virt tree's index
  docs: Fix typo on pull requests guide
  kernel-doc: Allow anonymous enum
  Documentation: sphinx: Don't parse socket() as identifier reference
  Documentation: sphinx: Add missing comma to list of strings
  ...

Pull percpu updates from Dennis Zhou:
 "A couple of updates to clean up the code with no change in behavior"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: Use struct_size() helper
  percpu: fix typo in pcpu_setup_first_chunk() comment
  percpu: Make pcpu_setup_first_chunk() void function

Pull cgroup updates from Tejun Heo:
 "Three minor cleanup patches"

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Use kvmalloc in cgroups-v1
  cgroup: minor tweak for logic to get cgroup css
  cgroup: Replace a seq_printf() call by seq_puts() in cgroup_print_ss_mask()

Pull asm-generic updates from Arnd Bergmann:
 "Here are three small cleanup patches for the include/asm-generic
  directory.

  Christoph removes the __ioremap as part of a cleanup, Nico improves
  the constant do_div() optimization, and Denis changes BUG_ON() to be
  consistent with other implementations"

* tag 'asm-generic-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: add unlikely to default BUG_ON(x)
  __div64_const32(): improve the generic C version
  asm-generic: don't provide __ioremap

Pull Xtensa updates from Max Filippov:

 - add support for xtensa call0 ABI in userspace

 - update xtensa virt board DTS for PCI root complex in KIO range

 - remove free_initrd_mem

* tag 'xtensa-20190917' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: virt: move PCI root complex to KIO range
  xtensa: add support for call0 ABI in userspace
  xtensa: clean up PS_WOE_BIT usage
  xtensa: remove free_initrd_mem

Pull s390 updates from Vasily Gorbik:

 - Add support for IBM z15 machines.

 - Add SHA3 and CCA AES cipher key support in zcrypt and pkey
   refactoring.

 - Move to arch_stack_walk infrastructure for the stack unwinder.

 - Various kasan fixes and improvements.

 - Various command line parsing fixes.

 - Improve decompressor phase debuggability.

 - Lift no bss usage restriction for the early code.

 - Use refcount_t for reference counters for couple of places in mm
   code.

 - Logging improvements and return code fix in vfio-ccw code.

 - Couple of zpci fixes and minor refactoring.

 - Remove some outdated documentation.

 - Fix secure boot detection.

 - Other various minor code clean ups.

* tag 's390-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (48 commits)
  s390: remove pointless drivers-y in drivers/s390/Makefile
  s390/cpum_sf: Fix line length and format string
  s390/pci: fix MSI message data
  s390: add support for IBM z15 machines
  s390/crypto: Support for SHA3 via CPACF (MSA6)
  s390/startup: add pgm check info printing
  s390/crypto: xts-aes-s390 fix extra run-time crypto self tests finding
  vfio-ccw: fix error return code in vfio_ccw_sch_init()
  s390: vfio-ap: fix warning reset not completed
  s390/base: remove unused s390_base_mcck_handler
  s390/sclp: Fix bit checked for has_sipl
  s390/zcrypt: fix wrong handling of cca cipher keygenflags
  s390/kasan: add kdump support
  s390/setup: avoid using strncmp with hardcoded length
  s390/sclp: avoid using strncmp with hardcoded length
  s390/module: avoid using strncmp with hardcoded length
  s390/pci: avoid using strncmp with hardcoded length
  s390/kaslr: reserve memory for kasan usage
  s390/mem_detect: provide single get_mem_detect_end
  s390/cmma: reuse kstrtobool for option value parsing
  ...

Pull OpenRISC updates from Stafford Horne:
 "Few small things for 5.4:

   - Fixup ethoc ethernet device tree descriptors which were previously
     broken, now ethernet works on FPGAs running OpenRISC!

   - Switch ioremap to use uncached semantics - from Christoph Hellwig"

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: map as uncached in ioremap
  or1k: dts: Add ethoc device to SMP devicetree
  or1k: dts: Fix ethoc network configuration in or1ksim devicetree

Pull m68knommu fix from Greg Ungerer:
 "Only a single change, fix up header include in ColdFire specific GPIO
  handling code"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: coldfire: Include the GPIO driver header

Pull core timer updates from Thomas Gleixner:
 "Timers and timekeeping updates:

   - A large overhaul of the posix CPU timer code which is a preparation
     for moving the CPU timer expiry out into task work so it can be
     properly accounted on the task/process.

     An update to the bogus permission checks will come later during the
     merge window as feedback was not complete before heading of for
     travel.

   - Switch the timerqueue code to use cached rbtrees and get rid of the
     homebrewn caching of the leftmost node.

   - Consolidate hrtimer_init() + hrtimer_init_sleeper() calls into a
     single function

   - Implement the separation of hrtimers to be forced to expire in hard
     interrupt context even when PREEMPT_RT is enabled and mark the
     affected timers accordingly.

   - Implement a mechanism for hrtimers and the timer wheel to protect
     RT against priority inversion and live lock issues when a (hr)timer
     which should be canceled is currently executing the callback.
     Instead of infinitely spinning, the task which tries to cancel the
     timer blocks on a per cpu base expiry lock which is held and
     released by the (hr)timer expiry code.

   - Enable the Hyper-V TSC page based sched_clock for Hyper-V guests
     resulting in faster access to timekeeping functions.

   - Updates to various clocksource/clockevent drivers and their device
     tree bindings.

   - The usual small improvements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (101 commits)
  posix-cpu-timers: Fix permission check regression
  posix-cpu-timers: Always clear head pointer on dequeue
  hrtimer: Add a missing bracket and hide `migration_base' on !SMP
  posix-cpu-timers: Make expiry_active check actually work correctly
  posix-timers: Unbreak CONFIG_POSIX_TIMERS=n build
  tick: Mark sched_timer to expire in hard interrupt context
  hrtimer: Add kernel doc annotation for HRTIMER_MODE_HARD
  x86/hyperv: Hide pv_ops access for CONFIG_PARAVIRT=n
  posix-cpu-timers: Utilize timerqueue for storage
  posix-cpu-timers: Move state tracking to struct posix_cputimers
  posix-cpu-timers: Deduplicate rlimit handling
  posix-cpu-timers: Remove pointless comparisons
  posix-cpu-timers: Get rid of 64bit divisions
  posix-cpu-timers: Consolidate timer expiry further
  posix-cpu-timers: Get rid of zero checks
  rlimit: Rewrite non-sensical RLIMIT_CPU comment
  posix-cpu-timers: Respect INFINITY for hard RTTIME limit
  posix-cpu-timers: Switch thread group sampling to array
  posix-cpu-timers: Restructure expiry array
  posix-cpu-timers: Remove cputime_expires
  ...

Pull x86 apic updates from Thomas Gleixner:

 - Cleanup the apic IPI implementation by removing duplicated code and
   consolidating the functions into the APIC core.

 - Implement a safe variant of the IPI broadcast mode. Contrary to
   earlier attempts this uses the core tracking of which CPUs have been
   brought online at least once so that a broadcast does not end up in
   some dead end in BIOS/SMM code when the CPU is still waiting for
   init. Once all CPUs have been brought up once, IPI broadcasting is
   enabled. Before that regular one by one IPIs are issued.

 - Drop the paravirt CR8 related functions as they have no user anymore

 - Initialize the APIC TPR to block interrupt 16-31 as they are reserved
   for CPU exceptions and should never be raised by any well behaving
   device.

 - Emit a warning when vector space exhaustion breaks the admin set
   affinity of an interrupt.

 - Make sure to use the NMI fallback when shutdown via reboot vector IPI
   fails. The original code had conditions which prevent the code path
   to be reached.

 - Annotate various APIC config variables as RO after init.

[ The ipi broadcase change came in earlier through the cpu hotplug
  branch, but I left the explanation in the commit message since it was
  shared between the two different branches    - Linus ]

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86/apic/vector: Warn when vector space exhaustion breaks affinity
  x86/apic: Annotate global config variables as "read-only after init"
  x86/apic/x2apic: Implement IPI shorthands support
  x86/apic/flat64: Remove the IPI shorthand decision logic
  x86/apic: Share common IPI helpers
  x86/apic: Remove the shorthand decision logic
  x86/smp: Enhance native_send_call_func_ipi()
  x86/smp: Move smp_function_call implementations into IPI code
  x86/apic: Provide and use helper for send_IPI_allbutself()
  x86/apic: Add static key to Control IPI shorthands
  x86/apic: Move no_ipi_broadcast() out of 32bit
  x86/apic: Add NMI_VECTOR wait to IPI shorthand
  x86/apic: Remove dest argument from __default_send_IPI_shortcut()
  x86/hotplug: Silence APIC and NMI when CPU is dead
  x86/cpu: Move arch_smt_update() to a neutral place
  x86/apic/uv: Make x2apic_extra_bits static
  x86/apic: Consolidate the apic local headers
  x86/apic: Move apic_flat_64 header into apic directory
  x86/apic: Move ipi header into apic directory
  x86/apic: Cleanup the include maze
  ...

Pull core irq updates from Thomas Gleixner:
 "Updates from the irq departement:

   - Update the interrupt spreading code so it handles numa node with
     different CPU counts properly.

   - A large overhaul of the ARM GiCv3 driver to support new PPI and SPI
     ranges.

   - Conversion of all alloc_fwnode() users to use physical addresses
     instead of virtual addresses so the virtual addresses are not
     leaked. The physical address is sufficient to identify the
     associated interrupt chip.

   - Add support for Marvel MMP3, Amlogic Meson SM1 interrupt chips.

   - Enforce interrupt threading at compile time if RT is enabled.

   - Small updates and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  irqchip/gic-v3-its: Fix LPI release for Multi-MSI devices
  irqchip/uniphier-aidet: Use devm_platform_ioremap_resource()
  irqdomain: Add the missing assignment of domain->fwnode for named fwnode
  irqchip/mmp: Coexist with GIC root IRQ controller
  irqchip/mmp: Mask off interrupts from other cores
  irqchip/mmp: Add missing chained_irq_{enter,exit}()
  irqchip/mmp: Do not use of_address_to_resource() to get mux regs
  irqchip/meson-gpio: Add support for meson sm1 SoCs
  dt-bindings: interrupt-controller: New binding for the meson sm1 SoCs
  genirq/affinity: Remove const qualifier from node_to_cpumask argument
  genirq/affinity: Spread vectors on node according to nr_cpu ratio
  genirq/affinity: Improve __irq_build_affinity_masks()
  irqchip: Remove dev_err() usage after platform_get_irq()
  irqchip: Add include guard to irq-partition-percpu.h
  irqchip/mmp: Do not call irq_set_default_host() on DT platforms
  irqchip/gic-v3-its: Remove the redundant set_bit for lpi_map
  irqchip/gic-v3: Add quirks for HIP06/07 invalid GICD_TYPER erratum 161010803
  irqchip/gic: Skip DT quirks when evaluating IIDR-based quirks
  irqchip/gic-v3: Warn about inconsistent implementations of extended ranges
  irqchip/gic-v3: Add EPPI range support
  ...

Pull x86 interrupt updates from Thomas Gleixner:
 "A small set of changes to simplify and improve the interrupt handling
  in do_IRQ() by moving the common case into common code and thereby
  cleaning it up"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Check for VECTOR_UNUSED directly
  x86/irq: Move IS_ERR_OR_NULL() check into common do_IRQ() code
  x86/irq: Improve definition of VECTOR_SHUTDOWN et al

Pull x86 pti updates from Thomas Gleixner:
 "Two small PTI updates:

   - Handle unaligned addresses gracefully in pti_clone_pagetable(). Not
     an issue with current callers, but a correctness problem. Adds a
     warning so any caller which hands in an unaligned address gets
     pointed out clearly.

   - Prevent PTI functions from being invoked when PTI is disabled at
     boottime. While this does not cause any harm today, it's pointless
     code executed and prone to cause subtle issues if the PTI
     implementation changes internally over time"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/pti: Do not invoke PTI functions when PTI is disabled
  x86/mm/pti: Handle unaligned address gracefully in pti_clone_pagetable()

Pull CPU hotplug updates from Thomas Gleixner:
 "A small update for the SMP hotplug code code:

   - Track "booted once" CPUs in a cpumask so the x86 APIC code has an
     easy way to decide whether broadcast IPIs are safe to use or not.

   - Implement a cpumask_or_equal() helper for the IPI broadcast
     evaluation.

     The above two changes have been also pulled into the x86/apic
     branch for implementing the conditional IPI broadcast feature.

   - Cache the number of online CPUs instead of reevaluating it over and
     over. num_online_cpus() is an unreliable snapshot anyway except
     when it is used outside a cpu hotplug locked region. The cached
     access is not changing this, but it's definitely faster than
     calculating the bitmap wheight especially in hot paths"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Cache number of online CPUs
  cpumask: Implement cpumask_or_equal()
  smp/hotplug: Track booted once CPUs in a cpumask

Pull timer fix from Thomas Gleixner:
 "A single fix to prevent the alarm timer code from returning ENOTSUPP
  to user space.

  ENOTSUPP is a purely kernel internal error code related to NFSv3 and
  should never be handed back to user space. The risk for ABI breakage
  is low as the number of systems which do not have a working RTC is
  very limited"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Use EOPNOTSUPP instead of ENOTSUPP

* acpi-misc:
  ACPI: thermal: Remove redundant acpi_has_method() calls
  ACPI: SBS: remove unused const variable 'SMBUS_PEC'

* acpi-doc:
  Documentation: ACPI: DSD: Convert LED documentation to ReST

* acpi-apei:
  ACPI / APEI: Release resources if gen_pool_add() fails
  ACPI / APEI: Get rid of NULL_UUID_LE constant

* acpi-processor:
  ACPI / processor: don't print errors for processorIDs == 0xff

* acpi-tables:
  ACPI: custom_method: fix memory leaks
  HMAT: Skip publishing target info for nodes with no online memory
  HMAT: Register attributes for memory hot add
  HMAT: Register memory-side cache after parsing

* acpi-pci:
  ACPI / PCI: fix acpi_pci_irq_enable() memory leak
  ACPI/PCI: Remove surplus parentheses from a return statement

* acpi-soc:
  ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint

* acpica:
  ACPICA: Update version to 20190816.
  ACPICA: Add "Windows 2019" string to _OSI support.
  ACPICA: Differentiate Windows 8.1 from Windows 8.
  ACPICA: Fully deploy ACPI_PRINTF_LIKE macro
  ACPICA: iASL,acpi_dump: Improve y/n query
  ACPICA: Fix issues with arg types within printf format strings
  ACPICA: Macros: remove pointer math on a null pointer
  ACPICA: Increase total number of possible Owner IDs
  ACPICA: Debugger: remove redundant assignment on obj_desc

* pm-opp:
  PM / OPP: Correct Documentation about library location
  opp: of: Support multiple suspend OPPs defined in DT
  dt-bindings: opp: Support multiple opp-suspend properties
  opp: core: add regulators enable and disable
  opp: Don't decrement uninitialized list_kref

* pm-qos:
  PM: QoS: Get rid of unused flags

* acpi-pm:
  ACPI: PM: Print debug messages on device power state changes

* pm-domains:
  PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state()
  PM / Domains: Simplify genpd_lookup_dev()
  PM / Domains: Align in-parameter names for some genpd functions

* pm-tools:
  pm-graph: make setVal unbuffered again for python2 and python3
  cpupower: update German translation
  tools/power/cpupower: fix 64bit detection when cross-compiling
  cpupower: Add missing newline at end of file
  pm-graph v5.5

* pm-devfreq: (28 commits)
  PM / devfreq: passive: fix compiler warning
  PM / devfreq: passive: Use non-devm notifiers
  PM / devfreq: exynos-bus: Convert to use dev_pm_opp_set_rate()
  PM / devfreq: exynos-bus: Correct clock enable sequence
  PM / devfreq: Correct devm_devfreq_remove_device() documentation
  PM / devfreq: events: extend events by type of counted data
  PM / devfreq: exynos-events: change matching code during probe
  PM / devfreq: tegra20: add COMMON_CLK dependency
  PM / devfreq: events: add Exynos PPMU new events
  PM / devfreq: Fix kernel oops on governor module load
  PM / devfreq: rk3399_dmc: Fix spelling typo
  PM / devfreq: Fix spelling typo
  PM / devfreq: Introduce driver for NVIDIA Tegra20
  PM / devfreq: tegra: Rename tegra-devfreq.c to tegra30-devfreq.c
  PM / devfreq: tegra: Enable COMPILE_TEST for the driver
  PM / devfreq: tegra: Support Tegra30
  PM / devfreq: tegra: Reconfigure hardware on governor's restart
  PM / devfreq: tegra: Move governor registration to driver's probe
  PM / devfreq: tegra: Mark ACTMON's governor as immutable
  PM / devfreq: tegra: Avoid inconsistency of current frequency value
  ...

* pm-cpufreq: (36 commits)
  cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
  cpufreq: qcom: Add support for qcs404 on nvmem driver
  cpufreq: qcom: Refactor the driver to make it easier to extend
  cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
  dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
  dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
  Documentation: cpufreq: Update policy notifier documentation
  cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events
  sched/cpufreq: Align trace event behavior of fast switching
  ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier
  video: pxafb: Remove cpufreq policy notifier
  video: sa1100fb: Remove cpufreq policy notifier
  arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY
  cpufreq: powerpc_cbe: Switch to QoS requests for freq limits
  cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits
  cpufreq: Print driver name if cpufreq_suspend() fails
  cpufreq: mediatek: Add support for mt8183
  cpufreq: mediatek: change to regulator_get_optional
  cpufreq: imx-cpufreq-dt: Add i.MX8MN support
  cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
  ...

* pm-cpuidle:
  cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available
  cpuidle-haltpoll: do not set an owner to allow modunload
  cpuidle-haltpoll: return -ENODEV on modinit failure
  cpuidle-haltpoll: set haltpoll as preferred governor
  cpuidle: allow governor switch on cpuidle_register_driver()
  powercap: idle_inject: Use higher resolution for idle injection
  cpuidle: play_idle: Increase the resolution to usec
  cpuidle-haltpoll: vcpu hotplug support
  cpuidle: teo: Get rid of redundant check in teo_update()
  cpuidle: teo: Allow tick to be stopped if PM QoS is used
  cpuidle: menu: Allow tick to be stopped if PM QoS is used
  cpuidle: header file stubs must be "static inline"
  cpuidle-haltpoll: disable host side polling when kvm virtualized
  cpuidle: add haltpoll governor
  governors: unify last_state_idx
  cpuidle: add poll_limit_ns to cpuidle_device structure
  add cpuidle-haltpoll driver

* pm-sleep: (29 commits)
  ACPI: PM: s2idle: Always set up EC GPE for system wakeup
  ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily
  PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}()
  PM / wakeup: Register wakeup class kobj after device is added
  PM / wakeup: Fix sysfs registration error path
  PM / wakeup: Show wakeup sources stats in sysfs
  PM / wakeup: Use wakeup_source_register() in wakelock.c
  PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare()
  PM: sleep: Replace strncmp() with str_has_prefix()
  PM: suspend: Fix platform_suspend_prepare_noirq()
  intel-hid: Disable button array during suspend-to-idle
  intel-hid: intel-vbtn: Avoid leaking wakeup_mode set
  ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices
  ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message
  ACPI: EC: PM: Consolidate some code depending on PM_SLEEP
  ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()
  ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend
  ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
  ACPI: PM: s2idle: Rearrange lps0_device_attach()
  PM/sleep: Expose suspend stats in sysfs
  ...

* pm-s2idle-rework: (21 commits)
  ACPI: PM: s2idle: Always set up EC GPE for system wakeup
  ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily
  PM: suspend: Fix platform_suspend_prepare_noirq()
  intel-hid: Disable button array during suspend-to-idle
  intel-hid: intel-vbtn: Avoid leaking wakeup_mode set
  ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices
  ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message
  ACPI: EC: PM: Consolidate some code depending on PM_SLEEP
  ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events()
  ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend
  ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter
  ACPI: PM: s2idle: Rearrange lps0_device_attach()
  ACPI: PM: Set up EC GPE for system wakeup from drivers that need it
  PM: sleep: Drop dpm_noirq_begin() and dpm_noirq_end()
  PM: sleep: Integrate suspend-to-idle with generig suspend flow
  PM: sleep: Simplify suspend-to-idle control flow
  ACPI: PM: Set s2idle_wakeup earlier and clear it later
  PM: sleep: Fix possible overflow in pm_system_cancel_wakeup()
  ACPI: EC: Return bool from acpi_ec_dispatch_gpe()
  ACPICA: Return u32 from acpi_dispatch_gpe()
  ...