Dexuan Cui says:

====================
net: mana: some misc patches

Patch 1 is a small fix.

Patch 2 reports OS info to the PF driver.
Before the patch, the req fields were all zeros.

Patch 3 fixes and cleans up the error handling of HWC creation failure.

Patch 4 adds the callbacks for hibernation/kexec. It's based on patch 3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the suspend/resume/shutdown callbacks for hibernation/kexec.

Add mana_gd_setup() and mana_gd_cleanup() for some common code, and
use them in the mand_gd_* callbacks.

Reuse mana_probe/remove() for the hibernation path.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when the HWC creation fails, the error handling is flawed,
e.g. if mana_hwc_create_channel() -> mana_hwc_establish_channel() fails,
the resources acquired in mana_hwc_init_queues() is not released.

Enhance mana_hwc_destroy_channel() to do the proper cleanup work and
call it accordingly.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PF driver might use the OS info for statistical purposes.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct port index rather than 0.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: Some selftest improvements

Here are a couple of selftest changes for MPTCP.

Patch 1 fixes a mistake where the wrong protocol (TCP vs MPTCP) could be
requested on the listening socket in some link failure tests.

Patch 2 refactors the simulataneous flow tests to improve timing
accuracy and give more consistent results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the simult_flows.sh self-tests are not very stable,
especially when running on slow VMs.

The tests measure runtime for transfers on multiple subflows
and check that the time is near the theoretical maximum.

The current test infra introduces a bit of jitter in test
runtime, due to multiple explicit delays. Additionally the
runtime is measured by the shell script wrapper. On a slow
VM, the script overhead is measurable and subject to relevant
jitter.

One solution to make the test more stable would be adding more
slack to the expected time; that could possibly hide real
regressions. Instead move the measurement inside the command
doing the transfer, and drop most unneeded sleeps.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In listener_ns, we should pass srv_proto argument to mptcp_connect command,
not cl_proto.

Fixes: 7d1e6f16 ("selftests: mptcp: add testcase for active-back")
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The tunnel_type check only allows for "netif_is_gretap", but for
OVS the port is actually "netif_is_ip6gretap" when setting up GRE
for ipv6, which means offloading request was rejected before.

Therefore, adding "netif_is_ip6gretap" allow ipv6gretap interface
for offloading.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new DSA switch operation, phylink_get_interfaces, which should
fill in which PHY_INTERFACE_MODE_* are supported by given port.

Use this before phylink_create() to fill phylinks supported_interfaces
member, allowing phylink to determine which PHY_INTERFACE_MODEs are
supported.
Signed-off-by: Marek Behún <kabel@kernel.org>
[tweaked patch and description to add more complete support -- rmk]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-10-29

This series contains updates to ice and iavf drivers and virtchnl header
file.

Brett removes vlan_promisc argument from a function call for ice driver.
In the virtchnl header file he removes an unused, reserved define and
converts raw value defines to instead use the BIT macro.

Marcin adds syncing of MAC addresses when creating switchdev VFs to
remove error messages on link up and stops showing buffer information
for port representors to remove duplicated entries being displayed for
ice driver.

Karen introduces a helper to go from pci_dev to iavf_adapter in the
iavf driver.

Przemyslaw fixes an issue where iavf was attempting to free IRQs before
calling disable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2021-10-30

Just two minor changes this time:

1) Remove some superfluous header files from xfrm4_tunnel.c
   From Mianhan Liu.

2) Simplify some error checks in xfrm_input().
   From luo penghao.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Use array_size() in ebtables, from Gustavo A. R. Silva.

2) Attach IPS_ASSURED to internal UDP stream state, reported by
   Maciej Zenczykowski.

3) Add NFT_META_IFTYPE to match on the interface type either
   from ingress or egress.

4) Generalize pktinfo->tprot_set to flags field.

5) Allow to match on inner headers / payload data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2021-10-29

1) Minor trivial refactoring and improvements
2) Check for unsupported parameters fields in SW steering
3) Support TC offload for OVS internal port, from Ariel, see below.

Ariel Levkovich says:

=====================

Support HW offload of TC rules involving OVS internal port
device type as the filter device or the destination
device.

The support is for flows which explicitly use the internal
port as source or destination device as well as indirect offload
for flows performing tunnel set or unset via a tunnel device
and the internal port is the tunnel overlay device.

Since flows with internal port as source port are added
as egress rules while redirecting to internal port is done
as an ingress redirect, the series introduces the necessary
changes in mlx5_core driver to support the new types of flows
and actions.

=====================

====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow to match and mangle on inner headers / payload data after the
transport header. There is a new field in the pktinfo structure that
stores the inner header offset which is calculated only when requested.
Only TCP and UDP supported at this stage.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Generalize boolean field to store more flags on the pktinfo structure.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Generalize NFT_META_IIFTYPE to NFT_META_IFTYPE which allows you to match
on the interface type of the skb->dev field. This field is used by the
netdev family to add an implicit dependency to skip non-ethernet packets
when matching on layer 3 and 4 TCP/IP header fields.

For backward compatibility, add the NFT_META_IIFTYPE alias to
NFT_META_IFTYPE.

Add __NFT_META_IIFTYPE, to be used by userspace in the future to match
specifically on the iiftype.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The internal stream state sets the timeout to 120 seconds 2 seconds
after the creation of the flow, attach this internal stream state to the
IPS_ASSURED flag for consistent event reporting.

Before this patch:

      [NEW] udp      17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
   [UPDATE] udp      17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
   [UPDATE] udp      17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
  [DESTROY] udp      17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]

Note IPS_ASSURED for the flow not yet in the internal stream state.

after this update:

      [NEW] udp      17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 [UNREPLIED] src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
   [UPDATE] udp      17 30 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282
   [UPDATE] udp      17 120 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]
  [DESTROY] udp      17 src=10.246.11.13 dst=216.239.35.0 sport=37282 dport=123 src=216.239.35.0 dst=10.246.11.13 sport=123 dport=37282 [ASSURED]

Before this patch, short-lived UDP flows never entered IPS_ASSURED, so
they were already candidate flow to be deleted by early_drop under
stress.

Before this patch, IPS_ASSURED is set on regardless the internal stream
state, attach this internal stream state to IPS_ASSURED.

packet #1 (original direction) enters NEW state
packet #2 (reply direction) enters ESTABLISHED state, sets on IPS_SEEN_REPLY
paclet #3 (any direction) sets on IPS_ASSURED (if 2 seconds since the
          creation has passed by).
Reported-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

br_switchdev_mdb_notify() is conditionally compiled only when
CONFIG_NET_SWITCHDEV=y and CONFIG_BRIDGE_IGMP_SNOOPING=y. It is called
from br_mdb.c, which is conditionally compiled only when
CONFIG_BRIDGE_IGMP_SNOOPING=y.

The shim definition of br_switchdev_mdb_notify() is therefore needed for
the case where CONFIG_NET_SWITCHDEV=n, however we mistakenly put it
there for the case where CONFIG_BRIDGE_IGMP_SNOOPING=n. This results in
build failures when CONFIG_BRIDGE_IGMP_SNOOPING=y and
CONFIG_NET_SWITCHDEV=n.

To fix this, put the shim definition right next to
br_switchdev_fdb_notify(), which is properly guarded by NET_SWITCHDEV=n.
Since this is called only from br_mdb.c, we need not take any extra
safety precautions, when NET_SWITCHDEV=n and BRIDGE_IGMP_SNOOPING=n,
this shim definition will be absent but nobody will be needing it.

Fixes: 9776457c ("net: bridge: mdb: move all switchdev logic to br_switchdev.c")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20211029223606.3450523-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
1GbE Intel Wired LAN Driver Updates 2021-10-29

This series contains updates to igc driver only.

Sasha removes an unnecessary media type check, adds a new device ID, and
changes a device reset to a port reset command.
====================

Link: https://lore.kernel.org/r/20211029174101.2970935-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is only one bnxt ULP in the upstream kernel and definition
for other ULP can be safely removed.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/3a8ea720b28ec4574648012d2a00208f1144eff5.1635527693.git.leonro@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2021-10-29

This series contains updates to i40e, ice, igb, and ixgbevf drivers.

Yang Li simplifies return statements of bool values for i40e and ice.

Jan Kundrát corrects problems with I2C bit-banging for igb.

Colin Ian King removes unneeded variable initialization for ixgbevf.
====================

Link: https://lore.kernel.org/r/20211029164641.2714265-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit d3953819 ("netdevsim: Add max_vfs to bus_dev")
added this file and saved the dentry for no apparent reason.

Link: https://lore.kernel.org/r/20211028211753.22612-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When performing route device lookup for decap action, support
the case of ovs internal port as the lookup result.

In such case, an internal port struct is mapped and attached
to the flow attributes so that the source port matching of the
rule will match on the internal port's metadata value.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Adjust termination table logic to handle rules which
involve internal port as filter or forwarding device.

For cases where the rule forwards from internal port
to uplink, always choose to go via termination table.
This is because it is not known from where the packet
originally arrived to the internal port and it is possible
that it came from the uplink itself, in which case
a term table is required to perform hairpin.
If the packet arrived from a vport, going via term
table has no effect.

For cases where the rule forwards to an internal port
from uplink the rep pointer will point to the uplink rep,
avoid going via termination table as it is not required.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Register callbacks for tc blocks of ovs internal port devices.

This allows an indirect offloading rules that apply on
such devices as the filter device.

In case a rule is added to a tc block of an internal port,
the mlx5 driver will implicitly add a matching on the internal
port's unique vport metadata value to the rule's matching list.
Therefore, only packets that previously hit a rule that redirects
to an internal port and got the vport metadata overwritten to the
internal port's unique metadata, can match on such indirect rule.

Offloading of both ingress and egress tc blocks of internal ports
is supported as opposed to other devices where only ingress block
offloading is supported.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When pefroming encap action, a route lookup is performed
to find the routing device the packet should be forwarded
to after the encapsulation. This is the device that has the
local tunnel ip address.

This change adds support to offload an encap rule where the
route device ends up being an ovs internal port.
In such case, the driver will add a HW rule that will encapsulate
the packet with the tunnel header and will overwrite the vport
metadata in reg_c0 to the internal port metadata value.
Finally, the packet will be forwarded to the root table to be
processed again with the indication that it came from an internal
port.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Allow offloading rules that redirect to ovs internal port
ingress and egress.

To support redirect to ingress device, offloading of REDIRECT_INGRESS
action is added.

When a tc rule redirects to ovs internal port, the hw rule will
overwrite the input vport value in reg_c0 with a new vport metadata
value that is mapped for this internal port using the internal
port mapping api that is introduce in previous patches.
After that the hw rule will redirect the packet to the root table
to continue processing with the new vport metadata value.

The new vport metadata value indicates that this packet is now
arriving through an internal port and therefore should be processed
using rules that apply on the same internal port as the filter device.
Therefore, following rules that apply on this internal port will have
to match on the same vport metadata value as part of their matching
keys to make sure the packet belongs to the internal port.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Setting the skb packet type field to host is usually
done when performing forwarding to ingress device.

This is required since the receive handling that is used
by the redirect to ingress action checks whether the packet
doesn't belong to this host and drops the packet in such case.

In order to be able to offload action redirect ingress, tc offload
code needs to accept the skbedit ptype action as well.

There's no special handling in HW for such action since it will
be followed by a redirect action and therefore, this code
only allows us to accept such action in the actions list but
not performing anything specific in HW for it.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Adding infrastructure to map ovs internal port device to vport
match metadata to support offload of rules with internal port as
the filter device or as the destination device.

The infrastructure allows adding and removing internal port device
to an eswitch database and getting a unique vport metadata value to
be placed and match on in reg_c0 when offloading rules that are coming
from or going to an internal port.

The new int port metadata can be written to the source port register
in HW to indicate that current source port of the packet is the
internal port and not one of the actual HW vports (uplink or VF).
Using this method, it is possible to offload TC rules with an OVS
internal port as their destination port (overwriting the src vport
register) or as the filter port (matching on the value of the src
vport register and making sure it matches to the internal port's
value).

There is also a need to handle a miss case where the packet's
src port value was changed in HW to an internal port but a following
rule which matches on this new src port value wasn't found in HW.

In such case, the packet will be forwarded to the driver with
metadata which allows driver to restore the info of the internal
port's netdevice. Once this info is restored, the uplink driver
can forward the packet to the relevant netdevice in SW.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Rename tun_dev to fwd_dev within mlx5e_tc_update_priv struct
since future implementation may introduce other device types
which the handler is forwarding to.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Move the ownership of skb forwarding to network stack to the
tc update_skb handler as different cases will require different
handling of the skb.

While the tc handler will take care of the various cases and
properly handle the handover of the skb to the network stack
and freeing the skb, the main rx handler will be kept clean
from branches and usage of flags.
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When a matcher is being built, we "consume" (clear) mask fields one by one,
and to verify that we do support all the required fields we check if the
whole mask was consumed, else the matching request includes unsupported
fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>

CT creates a counter for each CT rule, and for each such counter,
fs_counters tries to queue mlx5_fc_stats_work() work again via
mod_delayed_work(0) call to refresh all counters. This call has a
large performance impact when reaching high insertion rate and
accounts for ~8% of the insertion time when using software steering.

Allow skipping the refresh of all counters during counter creation.
Change CT to use this refresh skipping for it's counters.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Part of code that is related solely to IPsec is always compiled in the
driver code regardless if the IPsec functionality is enabled or disabled
in the driver code, this will add unnecessary branch in case IPsec is
disabled at Tx data path.

Move IPsec related code to IPsec related file such that in case of IPsec
is disabled and because of unlikely macro the compiler should be able to
optimize and omit the checksum IPsec code all together from Tx data path
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ignore_flow_level isn't supported for VFs, and so it causes
post_act and ct to warn about it.

Instead of disabling CT for VFs, and a driver update will be need
to enable CT again once firmware support this, remove this warning
specifically for VFs. This way, it could be automatically enabled on
future firmwares where VFs support ignore_flow_level capability.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Clang warns:

drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c:635:34: error: variable 'esw' is uninitialized when used here [-Werror,-Wuninitialized]
        mlx5_eswitch_del_offloaded_rule(esw, sample_flow->pre_rule, sample_flow->pre_attr);
                                        ^~~
drivers/net/ethernet/mellanox/mlx5/core/en/tc/sample.c:626:26: note: initialize the variable 'esw' to silence this warning
        struct mlx5_eswitch *esw;
                                ^
                                 = NULL
1 error generated.

It appears that the assignment should have been shuffled instead of
removed outright like in mlx5e_tc_sample_offload(). Add it back so there
is no use of esw uninitialized.

Fixes: a64c5edb ("net/mlx5: Remove unnecessary checks for slow path flag")
Link: https://github.com/ClangBuiltLinux/linux/issues/1494Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Fix driver not freeing VF's traffic irqs, prior to calling
pci_disable_msix in iavf_remove.
There were possible 2 erroneous states in which, iavf_close would
not be called.
One erroneous state is fixed by allowing netdev to register, when state
is already running. It was possible for VF adapter to enter state loop
from running to resetting, where iavf_open would subsequently fail.
If user would then unload driver/remove VF pci, iavf_close would not be
called, as the netdev was not registered, leaving traffic pcis still
allocated.
Fixed this by breaking loop, allowing netdev to open device when adapter
state is __IAVF_RUNNING and it is not explicitily downed.
Other possiblity is entering to iavf_remove from __IAVF_RESETTING state,
where iavf_close would not free irqs, but just return 0.
Fixed this by checking for last adapter state and then removing irqs.

Kernel panic:
[ 2773.628585] kernel BUG at drivers/pci/msi.c:375!
...
[ 2773.631567] RIP: 0010:free_msi_irqs+0x180/0x1b0
...
[ 2773.640939] Call Trace:
[ 2773.641572]  pci_disable_msix+0xf7/0x120
[ 2773.642224]  iavf_reset_interrupt_capability.part.41+0x15/0x30 [iavf]
[ 2773.642897]  iavf_remove+0x12e/0x500 [iavf]
[ 2773.643578]  pci_device_remove+0x3b/0xc0
[ 2773.644266]  device_release_driver_internal+0x103/0x1f0
[ 2773.644948]  pci_stop_bus_device+0x69/0x90
[ 2773.645576]  pci_stop_and_remove_bus_device+0xe/0x20
[ 2773.646215]  pci_iov_remove_virtfn+0xba/0x120
[ 2773.646862]  sriov_disable+0x2f/0xe0
[ 2773.647531]  ice_free_vfs+0x2f8/0x350 [ice]
[ 2773.648207]  ice_sriov_configure+0x94/0x960 [ice]
[ 2773.648883]  ? _kstrtoull+0x3b/0x90
[ 2773.649560]  sriov_numvfs_store+0x10a/0x190
[ 2773.650249]  kernfs_fop_write+0x116/0x190
[ 2773.650948]  vfs_write+0xa5/0x1a0
[ 2773.651651]  ksys_write+0x4f/0xb0
[ 2773.652358]  do_syscall_64+0x5b/0x1a0
[ 2773.653075]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 22ead37f ("i40evf: Add longer wait after remove module")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add helper function to go from pci_dev to adapter to make work simple -
to go from a pci_dev to the adapter structure and make netdev assignment
instead of having to go to the net_device then the adapter.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently raw hex values are used to define specific bits for each
capability/offload in virtchnl.h. Using raw hex values makes it
unclear which bits are used/available. Fix this by using the BIT()
macro so it's immediately obvious which bits are used/available.

Also, move the VIRTCHNL_VF_CAP_ADV_LINK_SPEED define in the correct
place to line up with the other bit values and add a comment for its
purpose.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>