- 21 Jul, 2014 3 commits
-
-
Veaceslav Falico authored
netdev_name() returns dev->name only when the net_device is in NETREG_REGISTERED state. However, dev->name is always populated on creation, so we can easily use it. There are two cases when there's no real name - when it's an empty string or when the name is in form of "eth%d", then netdev_name() returns "unnamed net_device". CC: "David S. Miller" <davem@davemloft.net> CC: Tom Gundersen <teg@jklm.no> Signed-off-by:
Veaceslav Falico <vfalico@gmail.com> Acked-by:
Tom Gundersen <teg@jklm.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Currently we're limited by a constant level of vlan nestings, and fail to find anything beyound that level (currently 2). To fix this - remove the limit of nestings when going through device tree, and when the end device is found - allocate the needed amount of vlan tags and return them, instead of found/not found. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Cong Wang authored
We modify mirred action (m->tcfm_dev) in netdev event, we need to prevent on-going mirred actions from reading freed m->tcfm_dev. So we need to acquire this spin lock. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Cong Wang <cwang@twopensource.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- 20 Jul, 2014 1 commit
-
-
Anish Bhatt authored
Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver") Fixes: 759a0cc5 ("cxgb4i: Add ipv6 code to driver, call into libcxgbi ipv6 api") Signed-off-by:
Anish Bhatt <anish@chelsio.com> Signed-off-by:
-
- 17 Jul, 2014 36 commits
-
-
Hariprasad Shenai authored
Fixed error introduced in commit id 7730b4c7 (" cxgb4/iw_cxgb4: work request logging feature") while compiling on 32 bit architecture reported by kbuild. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Andrew Rybchenko authored
Implement per channel software TX and RX packet counters accessed as ethtool statistics. This allows confirmation with MAC statistics. Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Patches 1 to 6 address issues with return values of some ndo/ethtool driver methods. In error scenarios, either an inappropriate error or a +ve return value (where the stack expects a -ve value) was being returned. Patch 7 updates description strings for certain UE bits. Patch 8 cleans up (reduces) argument passing for a few routines in be_cmds.c. Patch 9 removes some unused code (unused definitions.) Patch 10 updates NULL check in the driver to a consistent "if (!foo)" style. Patchs 11 to 13 fix a few minor issues with the earlier patch bec84e6b ("create optimal number of queues on SR-IOV config"): - patch 11 fixes BEx_get_resources() code to use be_max_vfs() macro - patch 12 skips SR-IOV config code for BE2 that doesn't support SRIOV - patch 13 uses adapter->flags to track SRIOV enabled state Patch 14 updates the driver version. ==================== Signed-off-by:
-
Sathya Perla authored
Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
The driver so far used adapter->num_vfs value to check if SR-IOV is enabled or not. But, the patch bec84e6b("create optimal number of queues on SR-IOV config") changed this logic. The adapter->num_vfs value is validated and set much before SR-IOV is enabled. So, we now use an explicit flag to track SR-IOV enabled state. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
As SRIOV is not supported on BE2 chip, avoid calling be_get/set_sriov_config() for BE2 chip. Signed-off-by:
-
Vasundhara Volam authored
max-vfs value must be accessed via the macro be_max_vfs(adapter). The earlier patch "create optimal number of queues on SR-IOV config" by mistake, did not use this macro. This patch fixes it. fixes: bec84e6b ("be2net: create optimal number of queues on SR-IOV config") Signed-off-by:
-
Kalesh AP authored
Replace "if (foo == NULL)" statements with "if (!foo)" to be consistent across the driver. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
-
Kalesh AP authored
Signed-off-by:
-
Kalesh AP authored
A pointer to adapter struct is passed anyway to all of the FW-cmd routines in be_cmds.c. For routines which query data from FW, the adapter pointer is enough to return the queried fields. There is no need to separately pass pointers to individual members of the adapter structure. This patch fixes this for be_cmd_get_fw_ver() and be_cmd_get_fw_cfg() routines. Signed-off-by:
-
Vasundhara Volam authored
This patch updates some description strings for BEx/Skyhawk-R UE (unrecoverable error) status register bits. The appropriate strings are logged when a UE is detected in the adapter. Signed-off-by:
-
Kalesh AP authored
The netlink layer expects a -ve status value to be returned when a driver ndo method encounters an error. The driver was directly passing the error status returned by FW (a positive value) to the stack. This patch fixes this by returning -EIO status when a FW-cmd reports an error. Signed-off-by:
-
Kalesh AP authored
ethtool expects a -ve status value to be returned when a driver method encounters an error. The driver was directly passing the error status returned by FW (a positive value) to ethtool. This patch fixes this by returning -EIO status in cases where FW returns an error. Signed-off-by:
-
Kalesh AP authored
Signed-off-by:
-
Kalesh AP authored
When the FW stops responding with completions, return -ETIMEDOUT error (instead of -1) to the stack. Signed-off-by:
-
Kalesh AP authored
For FW download ethtool cmd, if the user provides an FW-image incompatible with the chip, return -EINVAL instead of -1. Signed-off-by:
-
Kalesh AP authored
Updating VF's tx-rate and FW-download are not allowed when the interface is down. In such cases return -ENETDOWN to the stack. Signed-off-by:
-
Veaceslav Falico authored
Currently we might arrive to bond_net_exit() with some bonds left (that were created while the module is unloading). We take care of that by destroying sysfs (the last possibility to add new bonds) and then destroying all the remaining bonds. However, we destroy the /proc/net/bonding directory before destroying those last bonds, and get a warning that we're trying to destroy a non-empty proc directory (containing /proc/net/bonding/bondX). Fix this by moving bond_destroy_proc_dir() after all the bonds are destroyed, so that we're sure that no bonds exist. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Veaceslav Falico authored
As it's always called with RTNL held, via dev_set_allmulti/promiscuity. Also, remove the wrong comment. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Anish Bhatt says: ==================== cxgb4i: Add ipv6 support The following patchset add ipv6 support for the cxgb4i(iscsi) driver. Patch 1 moves a define from the iw_cxgb4 to cxgb4 to prevent code duplication, as it is used by cxgb4i and iw_cxgb4 both. Patch 2 exports symbols needed by cxgb4i for ipv6 support from cxgb4. Patch 3 & 4 deal with actual ipv6 code in libcxgbi/cxgb4i. Submitting to net-next as changes were needed in cxgb4/iw_cxgb4, and submitting to scsi separately would break compilation, cc-ing scsi & rdma. v2 : Cleanup macro that prints ip addresses by using %pIS in patch 3 ==================== Signed-off-by: -
Anish Bhatt authored
Signed-off-by:
Karen Xie <kxie@chelsio.com> Signed-off-by:
Manoj Malviya <manojmalviya@chelsio.com> Signed-off-by:
-
Anish Bhatt authored
Signed-off-by:
-
Anish Bhatt authored
Signed-off-by:
-
Anish Bhatt authored
This define is used by cxgb4i and iw_cxgb4, moving to avoid code duplication Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Jianhua Xie authored
Document the Layer 2 hash factors with packet type ID field. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> CC: Pan Jiafei <Jiafei.Pan@freescale.com> Signed-off-by:
Jianhua Xie <jianhua.xie@freescale.com> Signed-off-by:
-
Jianhua Xie authored
Current L2 hash helper calculates destination eth addr and source ether addr as L2 hash factors. This patch is adding packet type ID field into L2 hash factors. While one of BOND_XMIT_POLICY_LAYER2 or BOND_XMIT_POLICY_{LAYER|ENCAP}23 is applied, for the 2nd level hash, enhanced hash method can help to distribute different types of packets like IPv4/IPv6 packets to different slave devices. CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: David S. Miller <davem@davemloft.net> CC: Pan Jiafei <Jiafei.Pan@freescale.com> Acked-by: -
Anish Bhatt authored
v2: fixed issue with checking return of dcbnl_rtnl_ops->getapp() Signed-off-by:
-
Cong Wang authored
Like other places, we need to cancel the nest attribute after we start. Fortunately the netlink message will not be sent on failure, so it's not a big problem at all. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-07-16 This series contains updates to i40e only. Neerav adds support to get the port MAC address from firmware and adds support to the ndo_get_phys_port_id() callback to provide port specific unique ids to the netdev layer. Jakub Kicinski provides 2 fixes, first fixes i40e to never generate a software time stamp if the hardware time stamp is provided. Second fixes a race condition on queueing skb for hardware time by using a simple bit lock to avoid race conditions and leaking skbs when multiple transmit rings try to claim time stamping. Paul does some general cleanup of the driver to remove unneeded spaces, comments that are no longer valid, and break that will never get touched. Jacob Keller adds a verbose warning message when the incorrect PF attempts to control timestamping for a port to which it was not assigned. The primary intent of this message is to help debugging the reason why the SIOCSHWSTAMP ioctl has failed and to help narrow the cause of the issue. ==================== Signed-off-by: -
stephen hemminger authored
Generic netlink tables can be const. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Mahesh Bandewar authored
In TLB mode if tlb_dynamic_lb is NOT set, slaves from the bond group are selected based on the hash distribution. This does not exclude dead links which are part of the bond. Also if there is a temporary link event which brings down the interface, packets hashed on that interface would be dropped too. This patch fixes these issues and distributes flows across the UP links only. Also the array construction of links which are capable of sending packets happen in the control path leaving only link-selection during the data-path. One possible side effect of this is - at a link event; all flows will be shuffled to get good distribution. But impact of this should be minimum with the assumption that a member or members of the bond group are not available is a very temporary situation. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
David S. Miller authored
Grygorii Strashko says: ==================== net: davinci_mdio: reuse for keystone2 arch The similar MDIO HW blocks is used by keystone 2 SoCs as in Davinci SoCs: - one in Gigabit Ethernet (GbE) Switch Subsystem See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf - one in 10 Gigabit Ethernet Subsystem See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf Hence, reuse Davinci MDIO driver for Keystone 2 and enable TI networking for Keystone 2 devices. Also, as part of this series, enable PHY's creation from DT, because Keystone 2 supports DT boot mode only. Changes in v2: - review comments applied. Keystone 2 compatibility string changed to "ti,keystone_mdio". ==================== Signed-off-by:
-
Grygorii Strashko authored
This patch allows to create PHYs from DT in case if they are explicitly defined. The of_mdiobus_register() is used for such purposes. For backward compatibility, call of_mdiobus_register() only in case if at least one PHY's child is defined in DT, otherwise rollback to mdiobus_register(). Reviewed-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Grygorii Strashko authored
The similar MDIO HW blocks is used by keystone 2 SoCs as in Davinci SoCs: - one in Gigabit Ethernet (GbE) Switch Subsystem See http://www.ti.com/lit/ug/sprugv9d/sprugv9d.pdf - one in 10 Gigabit Ethernet Subsystem See http://www.ti.com/lit/ug/spruhj5/spruhj5.pdf Hence, reuse Davinci MDIO driver for Keystone 2 and enable TI networking for Keystone 2 devices Reviewed-by:
-
Jeff Layton authored
sparse is throwing warnings when building sunrpc modules due to some endianness shenanigans in ipv6.h. Specifically: CHECK net/sunrpc/addr.c include/net/ipv6.h:573:17: warning: restricted __be64 degrades to integer include/net/ipv6.h:577:34: warning: restricted __be32 degrades to integer include/net/ipv6.h:573:17: warning: restricted __be64 degrades to integer include/net/ipv6.h:577:34: warning: restricted __be32 degrades to integer Sprinkle some endianness fixups to silence them. These should all get fixed up at compile time, so I don't think this will add any extra work to be done at runtime. Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
-
David S. Miller authored
David Held says: ==================== udp: Fix multicast performance issues. Fix performance issues with listening to many different multicast sockets on different addresses with the same port. Instead of always using hash1, fall back to hash2 lookup when hash1 lookup is long. Patch 1 is a general cleanup and simplification which also makes the main implementation in Patch 2 simpler. Eric's recent change 63c6f81c avoided this being an issue in early demux. This makes it work for regular delivery as well. v1->v2 - updated hash collision detection v2->v3 - avoid flushing under lock unnecessarily at ARRAY_SIZE boundary ==================== Signed-off-by:
-
