- 05 Oct, 2008 4 commits
-
-
Douglas Schilling Landgraf authored
Removed duplicated entry for EM2800_BOARD_KWORLD_USB2800 Signed-off-by:
Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Costantino Leandro authored
CS2102K stop streaming on setlightfreq (50Hz & 60Hz). Disable it for now until a correct solution is found. Signed-off-by:
Costantino Leandro <le_costantino@pixartargentina.com.ar> Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Hans Verkuil authored
Earlier fixes to get the tuner audio working correctly broke the audio on the Compro VideoMate H900 cards. This is now fixed. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
- 29 Sep, 2008 9 commits
-
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by:
-
Hans Verkuil authored
Exposure was always 0. Thanks to sparse for finding this. Signed-off-by:
-
Hans Verkuil authored
sparse found an unbalanced BKL usage. Signed-off-by:
-
Mike Isely authored
The device 2040:2950 is a really old variant of the PVR USB2 hardware. I have just learned of its existence. For the purposes of the pvrusb2 driver, it is functionally identical to the well known 29xxx series (2040:2900). Amazing that this went undetected for 3+ years. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Douglas Schilling Landgraf authored
Free allocated memory Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by:
-
Douglas Schilling Landgraf authored
Free allocated memory Cc: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by:
-
Douglas Schilling Landgraf authored
Free allocated memory Signed-off-by:
-
Douglas Schilling Landgraf authored
Free allocated memory Signed-off-by:
-
Douglas Schilling Landgraf authored
Fixed order of usb_alloc_urb pointer validation. Cc: Luca Risolia <luca.risolia@studio.unibo.it> Signed-off-by:
-
- 11 Sep, 2008 2 commits
-
-
Hans Verkuil authored
i2c_client is allocated for us, we should never free it ourselves. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 07 Sep, 2008 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - make Lenovo 3000 N100 blacklist entry more specific Input: bcm5974 - add BTN_TOUCH event for mousedev benefit Input: bcm5974 - improve finger tracking and counting Input: bcm5974 - small formatting cleanup Input: bcm5974 - add maintainer entry
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_init(): fix memory leak when using CPU hotplug x86: pda_init(): fix memory leak when using CPU hotplug x86, xen: Use native_pte_flags instead of native_pte_val for .pte_flags x86: move mtrr cpu cap setting early in early_init_xxxx x86: delay early cpu initialization until cpuid is done x86: use X86_FEATURE_NOPL in alternatives x86: add NOPL as a synthetic CPU feature bit x86: boot: stub out unimplemented CPU feature words
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource, acpi_pm.c: check for monotonicity clocksource, acpi_pm.c: use proper read function also in errata mode ntp: fix calculation of the next jiffie to trigger RTC sync x86: HPET: read back compare register before reading counter x86: HPET fix moronic 32/64bit thinko clockevents: broadcast fixup possible waiters HPET: make minimum reprogramming delta useful clockevents: prevent endless loop lockup clockevents: prevent multiple init/shutdown clockevents: enforce reprogram in oneshot setup clockevents: prevent endless loop in periodic broadcast handler clockevents: prevent clockevent event_handler ending up handler_noop
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: Fix CONFIG_AC97_BUS dependency
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Probe initrd header only if explicitly specified [MIPS] TX39xx: Add missing local_flush_icache_range initialization [MIPS] TXx9: Fix txx9_pcode initialization [MIPS] Fix WARNING: at kernel/smp.c:290 [MIPS] Fix data bus error recovery
-
- 06 Sep, 2008 12 commits
-
-
Andreas Herrmann authored
Exception stacks are allocated each time a CPU is set online. But the allocated space is never freed. Thus with one CPU hotplug offline/online cycle there is a memory leak of 24K (6 pages) for a CPU. Fix is to allocate exception stacks only once -- when the CPU is set online for the first time. Signed-off-by:
Andreas Herrmann <andreas.herrmann3@amd.com> Cc: akpm@linux-foundation.org Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Andreas Herrmann authored
pda->irqstackptr is allocated whenever a CPU is set online. But it is never freed. This results in a memory leak of 16K for each CPU offline/online cycle. Fix is to allocate pda->irqstackptr only once. Signed-off-by:
-
Eduardo Habkost authored
Using native_pte_val triggers the BUG_ON() in the paravirt_ops version of pte_flags(). Signed-off-by:
Eduardo Habkost <ehabkost@redhat.com> Acked-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by:
-
Yinghai Lu authored
Krzysztof Helt found MTRR is not detected on k6-2 root cause: we moved mtrr_bp_init() early for mtrr trimming, and in early_detect we only read the CPU capability from cpuid, so some cpu doesn't have that bit in cpuid. So we need to add early_init_xxxx to preset those bit before mtrr_bp_init for those earlier cpus. this patch is for v2.6.27 Reported-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by:
-
Krzysztof Helt authored
Move early cpu initialization after cpu early get cap so the early cpu initialization can fix up cpu caps. Signed-off-by:
-
Dominik Brodowski authored
The current check for monotonicity is way too weak: Andreas Mohr reports ( http://lkml.org/lkml/2008/8/10/77 ) that on one of his test systems the current check only triggers in 50% of all cases, leading to catastrophic timer behaviour. To fix this issue, expand the check for monotonicity by doing ten consecutive tests instead of one. Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dominik Brodowski authored
On all hardware (some Intel ICH4, PIIX4 and PIIX4E chipsets) affected by a hardware errata there's about a 4.2% chance that initialization of the ACPI PMTMR fails. On those chipsets, we need to read out the timer value at least three times to get a correct result, for every once in a while (i.e. within a 3 ns window every 69.8 ns) the read returns a bogus result. During normal operation we work around this issue, but during initialization reading a bogus value may lead to -EINVAL even though the hardware is usable. Thanks to Andreas Mohr for spotting this issue. Signed-off-by:
-
Maciej W. Rozycki authored
We have a bug in the calculation of the next jiffie to trigger the RTC synchronisation. The aim here is to run sync_cmos_clock() as close as possible to the middle of a second. Which means we want this function to be called less than or equal to half a jiffie away from when now.tv_nsec equals 5e8 (500000000). If this is not the case for a given call to the function, for this purpose instead of updating the RTC we calculate the offset in nanoseconds to the next point in time where now.tv_nsec will be equal 5e8. The calculated offset is then converted to jiffies as these are the unit used by the timer. Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode, where the resulting value is rounded up. As a result the range of now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2. As a result if for example sync_cmos_clock() happens to be called at the time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 + TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the same range of now.tv_nsec again. Similarly for cases offsetted by an integer multiple of TICK_NSEC. This change addresses the problem by subtracting TICK_NSEC / 2 from the nanosecond offset to the next point in time where now.tv_nsec will be equal 5e8, effectively shifting the following rounding in timespec_to_jiffies() so that it produces a rounded-to-nearest result. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
-
Takashi Iwai authored
CONFIG_AC97_BUS is used from both sound and ucb1400 drivers. The recent change in Kconfig introduced the exclusive dependency on CONFIG_SOUND, and disabled the ucb1400 build without sound. This patch makes CONFIG_AC97_BUS independent. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Randy Dunlap <randy.dunlap@oracle.com>
-
Thomas Gleixner authored
After fixing the u32 thinko I sill had occasional hickups on ATI chipsets with small deltas. There seems to be a delay between writing the compare register and the transffer to the internal register which triggers the interrupt. Reading back the value makes sure, that it hit the internal match register befor we compare against the counter value. Signed-off-by:Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
We use the HPET only in 32bit mode because: 1) some HPETs are 32bit only 2) on i386 there is no way to read/write the HPET atomic 64bit wide The HPET code unification done by the "moron of the year" did not take into account that unsigned long is different on 32 and 64 bit. This thinko results in a possible endless loop in the clockevents code, when the return comparison fails due to the 64bit/332bit unawareness. unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit. but the final compare will fail and return -ETIME causing endless loops. Signed-off-by: -
Thomas Gleixner authored
Until the C1E patches arrived there where no users of periodic broadcast before switching to oneshot mode. Now we need to trigger a possible waiter for a periodic broadcast when switching to oneshot mode. Otherwise we can starve them for ever. Signed-off-by:
-
- 05 Sep, 2008 8 commits
-
-
H. Peter Anvin authored
Use X86_FEATURE_NOPL to determine if it is safe to use P6 NOPs in alternatives. Also, replace table and loop with simple if statement. Signed-off-by:H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
The long noops ("NOPL") are supposed to be detected by family >= 6. Unfortunately, several non-Intel x86 implementations, both hardware and software, don't obey this dictum. Instead, probe for NOPL directly by executing a NOPL instruction and see if we get #UD. Signed-off-by: -
H. Peter Anvin authored
The CPU feature detection code in the boot code is somewhat minimal, and doesn't include all possible CPUID words. In particular, it doesn't contain the code for CPU feature words 2 (Transmeta), 3 (Linux-specific), 5 (VIA), or 7 (scattered). Zero them out, so we can still set those bits as known at compile time; in particular, this allows creating a Linux-specific NOPL flag and have it required (and therefore resolvable at compile time) in 64-bit mode. Signed-off-by: -
Andrew Morton authored
mmc_block_open() increments md->usage although it returns with -EROFS when default mounting a MMC/SD card with write protect switch on. This reference counting bug prevents /dev/mmcblkX from being released on card removal, and situation worsen with reinsertion until the minor number range runs out. Reported-by: <sasin@solomon-systech.com> Acked-by:
Pierre Ossman <drzeus-list@drzeus.cx> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roland McGrath authored
Fix some pasto's in comments in the new linux/tracehook.h and asm-generic/syscall.h files. Reported-by:
Wenji Huang <wenji.huang@oracle.com> Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
If framebuffer registration failed in platform driver ->probe() callback, dev_get_drvdata() points to freed memory region, but ->remove() function try to use it and the following oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000228 pgd = c3a20000 [00000228] *pgd=23a2b031, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] Modules linked in: atmel_lcdfb(-) cfbcopyarea cfbimgblt cfbfillrect [last unloaded: atmel_lcdfb] CPU: 0 Not tainted (2.6.27-rc2 #116) PC is at atmel_lcdfb_remove+0x14/0xf8 [atmel_lcdfb] LR is at platform_drv_remove+0x20/0x24 pc : [<bf006bc4>] lr : [<c0157d28>] psr: a0000013 sp : c3a45e84 ip : c3a45ea0 fp : c3a45e9c r10: 00000002 r9 : c3a44000 r8 : c0026c04 r7 : 00000880 r6 : c02bb228 r5 : 00000000 r4 : c02bb230 r3 : bf007e3c r2 : c02bb230 r1 : 00000004 r0 : c02bb228 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 23a20000 DAC: 00000015 Process rmmod (pid: 6799, stack limit = 0xc3a44260) Stack: (0xc3a45e84 to 0xc3a46000) 5e80: c02bb230 bf007e3c bf007e3c c3a45eac c3a45ea0 c0157d28 bf006bc0 5ea0: c3a45ec4 c3a45eb0 c0156d20 c0157d18 c02bb230 c02bb2d8 c3a45ee0 c3a45ec8 5ec0: c0156da8 c0156cb8 bf007e3c bf007ee0 c02c8e14 c3a45efc c3a45ee4 c0156018 5ee0: c0156d50 bf007e3c bf007ee0 00000000 c3a45f18 c3a45f00 c0157220 c0155f9c 5f00: 00000000 bf007ee0 bf008000 c3a45f28 c3a45f1c c0157e34 c01571ec c3a45f38 5f20: c3a45f2c bf006ba8 c0157e30 c3a45fa4 c3a45f3c c005772c bf006ba4 656d7461 5f40: 636c5f6c 00626664 c004c988 c3a45f80 c3a45f5c 00000000 c3a45fb0 00000000 5f60: ffffffff becaccd8 00000880 00000000 000a5e80 00000001 bf007ee0 00000880 5f80: c3a45f84 00000000 becaccd4 00000002 000003df 00000081 00000000 c3a45fa8 5fa0: c0026a60 c0057584 00000002 000003df 00900081 000a5e80 00000880 00000000 5fc0: becaccd4 00000002 000003df 00000000 000a5e80 00000001 00000002 0000005f 5fe0: 4004f5ec becacbe8 0001a158 4004f5fc 20000010 00900081 f9ffbadf 7bbfb2bb Backtrace: [<bf006bb0>] (atmel_lcdfb_remove+0x0/0xf8 [atmel_lcdfb]) from [<c0157d28>] (platform_drv_remove+0x20/0x24) r6:bf007e3c r5:bf007e3c r4:c02bb230 [<c0157d08>] (platform_drv_remove+0x0/0x24) from [<c0156d20>] (__device_release_driver+0x78/0x98) [<c0156ca8>] (__device_release_driver+0x0/0x98) from [<c0156da8>] (driver_detach+0x68/0x90) r5:c02bb2d8 r4:c02bb230 [<c0156d40>] (driver_detach+0x0/0x90) from [<c0156018>] (bus_remove_driver+0x8c/0xb4) r6:c02c8e14 r5:bf007ee0 r4:bf007e3c [<c0155f8c>] (bus_remove_driver+0x0/0xb4) from [<c0157220>] (driver_unregister+0x44/0x48) r6:00000000 r5:bf007ee0 r4:bf007e3c [<c01571dc>] (driver_unregister+0x0/0x48) from [<c0157e34>] (platform_driver_unregister+0x14/0x18) r6:bf008000 r5:bf007ee0 r4:00000000 [<c0157e20>] (platform_driver_unregister+0x0/0x18) from [<bf006ba8>] (atmel_lcdfb_exit+0x14/0x1c [atmel_lcdfb]) [<bf006b94>] (atmel_lcdfb_exit+0x0/0x1c [atmel_lcdfb]) from [<c005772c>] (sys_delete_module+0x1b8/0x22c) [<c0057574>] (sys_delete_module+0x0/0x22c) from [<c0026a60>] (ret_fast_syscall+0x0/0x2c) r7:00000081 r6:000003df r5:00000002 r4:becaccd4 Code: e92dd870 e24cb004 e59050c4 e1a06000 (e5954228) ---[ end trace 85476b184d9e68d8 ]--- This patch fixes the oops. Signed-off-by:
Stanislaw Gruszka <stf_xl@wp.pl> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
-
Rafael J. Wysocki authored
Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361 and caused by commit f735a2a1 ("[netdrvr] forcedeth: setup wake-on-lan before shutting down") that makes network adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced kernels. The problem appears to be that if the adapter is put into D3_hot during ->shutdown(), it cannot be brought back into D0 after kexec (ref. http://marc.info/?l=linux-kernel&m=121900062814967&w=4). Therefore, only put forcedeth into D3 during ->shutdown() if the system is to be powered off. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Tested-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Li Zefan authored
I found we can no longer set limit to 0 with 2.6.27-rcX: # mount -t cgroup -omemory xxx /mnt # mkdir /mnt/0 # echo 0 > /mnt/0/memory.limit_in_bytes bash: echo: write error: Device or resource busy It turned out 'limit' can't be set to 'usage', which is wrong IMO. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
