- 22 Feb, 2018 40 commits
-
-
Johan Hovold authored
commit eac56aa3 upstream. Fix child-node lookup during initialisation which was using the wrong OF-helper and ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent pci node could end up being prematurely freed as of_find_node_by_name() drops a reference to its first argument. Any matching child interrupt-controller node was also leaked. Fixes: 0c4ffcfe ("PCI: keystone: Add TI Keystone PCIe driver") Cc: stable <stable@vger.kernel.org> # 3.18 Acked-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Johan Hovold <johan@kernel.org> [lorenzo.pieralisi@arm.com: updated commit subject] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ray Jui authored
commit 3b65ca50 upstream. With the inbound DMA mapping supported added, the iProc PCIe driver parses DT property "dma-ranges" through call to "of_pci_dma_range_parser_init()". In the case of BCMA, this results in a NULL pointer deference due to a missing of_node. Fix this by adding a guard in pcie-iproc-platform.c to only enable the inbound DMA mapping logic when DT property "dma-ranges" is present. Fixes: dd9d4e74 ("PCI: iproc: Add inbound DMA mapping support") Reported-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Ray Jui <ray.jui@broadcom.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
-
Dongdong Liu authored
commit deb86999 upstream. HiSilicon Hip06/Hip07 can operate as either a Root Port or an Endpoint. It always advertises an MSI capability, but it can only generate MSIs when in Endpoint mode. The device has the same Vendor and Device IDs in both modes, so check the Class Code and disable MSI only when operating as a Root Port. [bhelgaas: changelog] Fixes: 72f2ff0d ("PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports") Signed-off-by:
Dongdong Liu <liudongdong3@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Zhou Wang <wangzhou1@hisilicon.com> Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
-
Marcin Nowakowski authored
commit 67a3ba25 upstream. Commit 73fbc1eb ("MIPS: fix mem=X@Y commandline processing") added a fix to ensure that the memory range between PHYS_OFFSET and low memory address specified by mem= cmdline argument is not later processed by free_all_bootmem. This change was incorrect for systems where the commandline specifies more than 1 mem argument, as it will cause all memory between PHYS_OFFSET and each of the memory offsets to be marked as reserved, which results in parts of the RAM marked as reserved (Creator CI20's u-boot has a default commandline argument 'mem=256M@0x0 mem=768M@0x30000000'). Change the behaviour to ensure that only the range between PHYS_OFFSET and the lowest start address of the memories is marked as protected. This change also ensures that the range is marked protected even if it's only defined through the devicetree and not only via commandline arguments. Reported-by:
Mathieu Malaterre <mathieu.malaterre@gmail.com> Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@mips.com> Fixes: 73fbc1eb ("MIPS: fix mem=X@Y commandline processing") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # v4.11+ Tested-by:
Mathieu Malaterre <malat@debian.org> Patchwork: https://patchwork.linux-mips.org/patch/18562/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Corentin Labbe authored
commit 2e6522c5 upstream. MIPS_GENERIC selects some options conditional on BIG_ENDIAN which does not exist. Replace BIG_ENDIAN with CPU_BIG_ENDIAN which is the correct kconfig name. Note that BMIPS_GENERIC does the same which confirms that this patch is needed. Fixes: eed0eabd ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by:
-
Jan H. Schönherr authored
commit 10a0cd6e upstream. The functions devm_memremap_pages() and devm_memremap_pages_release() use different ways to calculate the section-aligned amount of memory. The latter function may use an incorrect size if the memory region is small but straddles a section border. Use the same code for both. Cc: <stable@vger.kernel.org> Fixes: 5f29a77c ("mm: fix mixed zone detection in devm_memremap_pages") Signed-off-by:
Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit af27d940 upstream. We get a warning about some slow configurations in randconfig kernels: mm/memory.c:83:2: error: #warning Unfortunate NUMA and NUMA Balancing config, growing page-frame for last_cpupid. [-Werror=cpp] The warning is reasonable by itself, but gets in the way of randconfig build testing, so I'm hiding it whenever CONFIG_COMPILE_TEST is set. The warning was added in 2013 in commit 75980e97 ("mm: fold page->_last_nid into page->flags where possible"). Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ernesto A. Fernández authored
commit 9f037248 upstream. The grpid option is currently described as being the same as nogrpid. Signed-off-by:
Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Signed-off-by:
-
Zhouyi Zhou authored
commit 06f29cc8 upstream. In the function __ext4_grp_locked_error(), __save_error_info() is called to save error info in super block block, but does not sync that information to disk to info the subsequence fsck after reboot. This patch writes the error information to disk. After this patch, I think there is no obvious EXT4 error handle branches which leads to "Remounting filesystem read-only" will leave the disk partition miss the subsequence fsck. Signed-off-by:
Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by:
-
Harshad Shirwadkar authored
commit abbc3f93 upstream. This patch fixes a race between the shutdown path and bio completion handling. In the ext4 direct io path with async io, after submitting a bio to the block layer, if journal starting fails, ext4_direct_IO_write() would bail out pretending that the IO failed. The caller would have had no way of knowing whether or not the IO was successfully submitted. So instead, we return -EIOCBQUEUED in this case. Now, the caller knows that the IO was submitted. The bio completion handler takes care of the error. Tested: Ran the shutdown xfstest test 461 in loop for over 2 hours across 4 machines resulting in over 400 runs. Verified that the race didn't occur. Usually the race was seen in about 20-30 iterations. Signed-off-by:
Harshad Shirwadkar <harshads@google.com> Signed-off-by:
-
Tobin C. Harding authored
commit f69120ce upstream. Sphinx emits various (26) warnings when building make target 'htmldocs'. Currently struct definitions contain duplicate documentation, some as kernel-docs and some as standard c89 comments. We can reduce duplication while cleaning up the kernel docs. Move all kernel-docs to right above each struct member. Use the set of all existing comments (kernel-doc and c89). Add documentation for missing struct members and function arguments. Signed-off-by:
Tobin C. Harding <me@tobin.cc> Signed-off-by:
-
Lukas Wunner authored
commit d6fa7588 upstream. Commit 4eebd5a4 ("apple-gmux: lock iGP IO to protect from vgaarb changes") amended this driver's ->probe hook to lock decoding of normal (non-legacy) I/O space accesses to the integrated GPU on dual-GPU MacBook Pros. The lock stays in place until the driver is unbound. The change was made to work around an issue with the out-of-tree nvidia graphics driver (available at http://www.nvidia.com/object/unix.html). It contains the following sequence in nvidia/nv.c: #if defined(CONFIG_VGA_ARB) && !defined(NVCPU_PPC64LE) #if defined(VGA_DEFAULT_DEVICE) vga_tryget(VGA_DEFAULT_DEVICE, VGA_RSRC_LEGACY_MASK); #endif vga_set_legacy_decoding(dev, VGA_RSRC_NONE); #endif This code was reported to cause deadlocks with VFIO already in 2013: https://devtalk.nvidia.com/default/topic/545560 I've reported the issue to Nvidia developers once more in 2017: https://www.spinics.net/lists/dri-devel/msg138754.html On the MacBookPro10,1, this code apparently breaks backlight control (which is handled by apple-gmux via an I/O region starting at 0x700), as reported by Petri Hodju: https://bugzilla.kernel.org/show_bug.cgi?id=86121 I tried to replicate Petri's observations on my MacBook9,1, which uses the same Intel Ivy Bridge + Nvidia GeForce GT 650M architecture, to no avail. On my machine apple-gmux' I/O region remains accessible even with the nvidia driver loaded and commit 4eebd5a4 reverted. Petri reported that apple-gmux becomes accessible again after a suspend/resume cycle because the BIOS changed the VGA routing on the root port to the Nvidia GPU. Perhaps this is a BIOS issue after all that can be fixed with an update? In any case, the change made by commit 4eebd5a4 has turned out to cause two new issues: * Wilfried Klaebe reports a deadlock when launching Xorg because it opens /dev/vga_arbiter and calls vga_get(), but apple-gmux is holding a lock on I/O space indefinitely. It looks like apple-gmux' current behavior is an abuse of the vgaarb API as locks are not meant to be held for longer periods: https://bugzilla.kernel.org/show_bug.cgi?id=88861#c11 https://bugzilla.kernel.org/attachment.cgi?id=217541 * On dual GPU MacBook Pros introduced since 2013, the integrated GPU is powergated on boot und thus becomes invisible to Linux unless a custom EFI protocol is used to leave it powered on. (A patch exists but is not in mainline yet due to several negative side effects.) On these machines, locking I/O to the integrated GPU (as done by 4eebd5a4) fails and backlight control is therefore broken: https://bugzilla.kernel.org/show_bug.cgi?id=105051 So let's revert commit 4eebd5a4 please. Users experiencing the issue with the proprietary nvidia driver can comment out the above- quoted problematic code as a workaround (or try updating the BIOS). Cc: Petri Hodju <petrihodju@yahoo.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Andy Ritger <aritger@nvidia.com> Cc: Ronald Tschalär <ronald@innovation.ch> Tested-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
-
Sagi Grimberg authored
commit 2572cf57 upstream. The consumers of this routine expects the affinity map of of vector index relative to the first completion vector. The upper layers are not aware of internal/private completion vectors that mlx5 allocates for its own usage. Hence, return the affinity map of vector index relative to the first completion vector. Fixes: 05e0cc84 ("net/mlx5: Fix get vector affinity helper function") Reported-by:
Logan Gunthorpe <logang@deltatee.com> Tested-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jerome Brunet authored
commit fe0e5804 upstream. This reverts commit 0a446976. This commit was initially intended to fix problems with hs200 and hs400 on some boards, mainly the odroid-c2. The OC2 (Rev 0.2) I have performs well in this modes, so I could not confirm these issues. We've had several reports about the issues being still present on (some) OC2, so apparently, this change does not do what it was supposed to do. Maybe the eMMC signal quality is on the edge on the board. This may explain the variability we see in term of stability, but this is just a guess. Lowering the max_frequency to 100Mhz seems to do trick for those affected by the issue Worse, the commit created new issues (CRC errors and hangs) on other boards, such as the kvim 1 and 2, the p200 or the libretech-cc. According to amlogic, the Tx phase should not be tuned and left in its default configuration, so it is best to just revert the commit. Fixes: 0a446976 ("mmc: meson-gx: include tx phase in the tuning process") Cc: <stable@vger.kernel.org> # 4.14+ Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Phil Elwell authored
commit 118032be upstream. The optional DT parameter max-frequency could init the max bus frequency. So take care of this, before setting the max bus frequency. Fixes: 660fc733 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Cc: <stable@vger.kernel.org> # 4.12+ Signed-off-by:
-
Linus Walleij authored
commit bd9b9027 upstream. The bounce buffer is gone from the MMC core, and now we found out that there are some (crippled) i.MX boards out there that have broken ADMA (cannot do scatter-gather), and also broken PIO so they must use SDMA. Closer examination shows a less significant slowdown also on SDMA-only capable Laptop hosts. SDMA sets down the number of segments to one, so that each segment gets turned into a singular request that ping-pongs to the block layer before the next request/segment is issued. Apparently it happens a lot that the block layer send requests that include a lot of physically discontiguous segments. My guess is that this phenomenon is coming from the file system. These devices that cannot handle scatterlists in hardware can see major benefits from a DMA-contiguous bounce buffer. This patch accumulates those fragmented scatterlists in a physically contiguous bounce buffer so that we can issue bigger DMA data chunks to/from the card. When tested with a PCI-integrated host (1217:8221) that only supports SDMA: 0b:00.0 SD Host controller: O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05) This patch gave ~1Mbyte/s improved throughput on large reads and writes when testing using iozone than without the patch. dmesg: sdhci-pci 0000:0b:00.0: SDHCI controller found [1217:8221] (rev 5) mmc0 bounce up to 128 segments into one, max segment size 65536 bytes mmc0: SDHCI controller on PCI [0000:0b:00.0] using DMA On the i.MX SDHCI controllers on the crippled i.MX 25 and i.MX 35 the patch restores the performance to what it was before we removed the bounce buffers. Cc: Pierre Ossman <pierre@ossman.eu> Cc: Benoît Thébaudeau <benoit@wsystem.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Benjamin Beckmeyer <beckmeyer.b@rittal.de> Cc: stable@vger.kernel.org # v4.14+ Fixes: de3ee99b ("mmc: Delete bounce buffer handling") Tested-by:
Benjamin Beckmeyer <beckmeyer.b@rittal.de> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Alexander Potapenko authored
commit 3876bbe2 upstream. KMSAN reported use of uninitialized |entry->e_referenced| in a condition in mb_cache_shrink(): ================================================================== BUG: KMSAN: use of uninitialized memory in mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 CPU: 2 PID: 816 Comm: kswapd1 Not tainted 4.11.0-rc5+ #2877 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x172/0x1c0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:927 __msan_warning_32+0x61/0xb0 mm/kmsan/kmsan_instr.c:469 mb_cache_shrink+0x3b4/0xc50 fs/mbcache.c:287 mb_cache_scan+0x67/0x80 fs/mbcache.c:321 do_shrink_slab mm/vmscan.c:397 [inline] shrink_slab+0xc3d/0x12d0 mm/vmscan.c:500 shrink_node+0x208f/0x2fd0 mm/vmscan.c:2603 kswapd_shrink_node mm/vmscan.c:3172 [inline] balance_pgdat mm/vmscan.c:3289 [inline] kswapd+0x160f/0x2850 mm/vmscan.c:3478 kthread+0x46c/0x5f0 kernel/kthread.c:230 ret_from_fork+0x29/0x40 arch/x86/entry/entry_64.S:430 chained origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_save_stack mm/kmsan/kmsan.c:317 [inline] kmsan_internal_chain_origin+0x12a/0x1f0 mm/kmsan/kmsan.c:547 __msan_store_shadow_origin_1+0xac/0x110 mm/kmsan/kmsan_instr.c:257 mb_cache_entry_create+0x3b3/0xc60 fs/mbcache.c:95 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 origin: save_stack_trace+0x37/0x40 arch/x86/kernel/stacktrace.c:59 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:302 [inline] kmsan_internal_poison_shadow+0xb1/0x1a0 mm/kmsan/kmsan.c:198 kmsan_kmalloc+0x7f/0xe0 mm/kmsan/kmsan.c:337 kmem_cache_alloc+0x1c2/0x1e0 mm/slub.c:2766 mb_cache_entry_create+0x283/0xc60 fs/mbcache.c:86 ext4_xattr_cache_insert fs/ext4/xattr.c:1647 [inline] ext4_xattr_block_set+0x4c82/0x5530 fs/ext4/xattr.c:1022 ext4_xattr_set_handle+0x1332/0x20a0 fs/ext4/xattr.c:1252 ext4_xattr_set+0x4d2/0x680 fs/ext4/xattr.c:1306 ext4_xattr_trusted_set+0x8d/0xa0 fs/ext4/xattr_trusted.c:36 __vfs_setxattr+0x703/0x790 fs/xattr.c:149 __vfs_setxattr_noperm+0x27a/0x6f0 fs/xattr.c:180 vfs_setxattr fs/xattr.c:223 [inline] setxattr+0x6ae/0x790 fs/xattr.c:449 path_setxattr+0x1eb/0x380 fs/xattr.c:468 SYSC_lsetxattr+0x8d/0xb0 fs/xattr.c:490 SyS_lsetxattr+0x77/0xa0 fs/xattr.c:486 entry_SYSCALL_64_fastpath+0x13/0x94 ================================================================== Signed-off-by:
Alexander Potapenko <glider@google.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Cc: stable@vger.kernel.org # v4.6 Signed-off-by:
-
Stewart Smith authored
commit 5b8b5806 upstream. According to the OPAL docs: skiboot-5.2.5/doc/opal-api/opal-rtc-read-3.txt skiboot-5.2.5/doc/opal-api/opal-rtc-write-4.txt OPAL_HARDWARE may be returned from OPAL_RTC_READ or OPAL_RTC_WRITE and this indicates either a transient or permanent error. Prior to this patch, Linux was not dealing with OPAL_HARDWARE being a permanent error particularly well, in that you could end up in a busy loop. This was not too hard to trigger on an AMI BMC based OpenPOWER machine doing a continuous "ipmitool mc reset cold" to the BMC, the result of that being that we'd get stuck in an infinite loop in opal_get_rtc_time(). We now retry a few times before returning the error higher up the stack. Fixes: 16b1d26e ("rtc/tpo: Driver to support rtc and wakeup on PowerNV platform") Cc: stable@vger.kernel.org # v3.19+ Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Julia Lawall authored
commit 3a61b527 upstream. Check the variable that was most recently initialized. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x, y, f, g, e, m; statement S1,S2,S3,S4; @@ x = f(...); if (\(<+...x...+>\&e\)) S1 else S2 ( x = g(...); | m = g(...,&x,...); | y = g(...); *if (e) S3 else S4 ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 239b5f64 upstream. Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370Acked-by:
-
Shanker Donthineni authored
commit 16e574d7 upstream. References to CPU part number MIDR_QCOM_FALKOR were dropped from the mailing list patch due to mainline/arm64 branch dependency. So this patch adds the missing part number. Fixes: ec82b567 ("arm64: Implement branch predictor hardening for Falkor") Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Daniel Vetter authored
commit 24b8ef69 upstream. In the past the ast driver relied upon the fbdev emulation helpers to call ->load_lut at boot-up. But since commit b8e2b019 Author: Peter Rosin <peda@axentia.se> Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette that's cleaned up and drivers are expected to boot into a consistent lut state. This patch fixes that. Fixes: b8e2b019 ("drm/fb-helper: factor out pseudo-palette") Cc: Peter Rosin <peda@axenita.se> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.14+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123 Cc: Bill Fraser <bill.fraser@gmail.com> Reported-and-Tested-by:
Bill Fraser <bill.fraser@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Andrey Grodzovsky authored
commit adab595d upstream. The handle describes kernel logical address, should be unsigned long and not uint32_t. Fixes KASAN error and GFP on driver unload. Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Ray Strode authored
commit 16c6db36 upstream. qxl_cursor_atomic_update allocs a bo for the cursor that it never frees up at the end of the function. This commit fixes that. Signed-off-by:
Ray Strode <rstrode@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Tom St Denis authored
commit 95244db2 upstream. The buf pointer was not being incremented inside the loop meaning the same block of data would be read or written repeatedly. (v2) Change 'buf' pointer to uint8_t* type Cc: stable@vger.kernel.org Fixes: 09ac4fcb ("drm/ttm: Implement vm_operations_struct.access v2") Signed-off-by:
Tom St Denis <tom.stdenis@amd.com> Reviewed-by:
-
Felix Kuehling authored
commit fd5002d6 upstream. A BO that's already swapped would be added back to the swap-LRU list for example if its validation failed under high memory pressure. This could later lead to swapping it out again and leaking previous swap storage. This commit adds a condition to prevent that from happening. v2: Check page_flags instead of swap_storage Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Ingo Molnar authored
commit e4865757 upstream. Josh Poimboeuf noticed the following bug: "The paranoid exit code only restores the saved CR3 when it switches back to the user GS. However, even in the kernel GS case, it's possible that it needs to restore a user CR3, if for example, the paranoid exception occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and SWAPGS." Josh also confirmed via targeted testing that it's possible to hit this bug. Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch. The reason we haven't seen this bug reported by users yet is probably because "paranoid" entry points are limited to the following cases: idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry machine_check do_mce has_error_code=0 paranoid=1 Amongst those entry points only machine_check is one that will interrupt an IRQS-off critical section asynchronously - and machine check events are rare. The other main asynchronous entries are NMI entries, which can be very high-freq with perf profiling, but they are special: they don't use the 'idtentry' macro but are open coded and restore user CR3 unconditionally so don't have this bug. Reported-and-tested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180214073910.boevmg65upbk3vqb@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 24dbc600 upstream. Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/20180213192208.GA26414@embeddedor.comSigned-off-by:
-
Dan Carpenter authored
commit 9de29eac upstream. If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-janitors@vger.kernel.org Fixes: 9005c683 ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwandaSigned-off-by:
-
Jia Zhang authored
commit b399151c upstream. x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by:
Jia Zhang <qianyue.zj@alibaba-inc.com> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/1514771530-70829-1-git-send-email-qianyue.zj@alibaba-inc.comSigned-off-by:
-
Rui Wang authored
commit 961888b1 upstream. For distributions with old userspace header files, the _sigfault structure is different. mpx-mini-test fails with the following error: [root@Purley]# mpx-mini-test_64 tabletest XSAVE is supported by HW & OS XSAVE processor supported state mask: 0x2ff XSAVE OS supported state mask: 0x2ff BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0 BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0 starting mpx bounds table test ERROR: siginfo bounds do not match shadow bounds for register 0 Fix it by using the correct offset of _lower/_upper in _sigfault. RHEL needs this patch to work. Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave.hansen@linux.intel.com Fixes: e754aedc ("x86/mpx, selftests: Add MPX self test") Link: http://lkml.kernel.org/r/1513586050-1641-1-git-send-email-rui.y.wang@intel.comSigned-off-by:
-
Andy Lutomirski authored
commit 1299ef1d upstream. flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.orgSigned-off-by:
-
Michal Hocko authored
commit f335195a upstream. Commit 4675ff05 ("kmemcheck: rip it out") has removed the code but for some reason SPDX header stayed in place. This looks like a rebase mistake in the mmotm tree or the merge mistake. Let's drop those leftovers as well. Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 4675ff05 upstream. Fix up makefiles, remove references, and git rm kmemcheck. Link: http://lkml.kernel.org/r/20171007030159.22241-4-alexander.levin@verizon.comSigned-off-by:
Sasha Levin <alexander.levin@verizon.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Potapenko <glider@google.com> Cc: Tim Hansen <devtimhansen@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit d8be7566 upstream. Now that kmemcheck is gone, we don't need the NOTRACK flags. Link: http://lkml.kernel.org/r/20171007030159.22241-5-alexander.levin@verizon.comSigned-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 75f296d9 upstream. Convert all allocations that used a NOTRACK flag to stop using it. Link: http://lkml.kernel.org/r/20171007030159.22241-3-alexander.levin@verizon.comSigned-off-by:
-
Levin, Alexander (Sasha Levin) authored
commit 49502766 upstream. Patch series "kmemcheck: kill kmemcheck", v2. As discussed at LSF/MM, kill kmemcheck. KASan is a replacement that is able to work without the limitation of kmemcheck (single CPU, slow). KASan is already upstream. We are also not aware of any users of kmemcheck (or users who don't consider KASan as a suitable replacement). The only objection was that since KASAN wasn't supported by all GCC versions provided by distros at that time we should hold off for 2 years, and try again. Now that 2 years have passed, and all distros provide gcc that supports KASAN, kill kmemcheck again for the very same reasons. This patch (of 4): Remove kmemcheck annotations, and calls to kmemcheck from the kernel. [alexander.levin@verizon.com: correctly remove kmemcheck call from dma_map_sg_attrs] Link: http://lkml.kernel.org/r/20171012192151.26531-1-alexander.levin@verizon.com Link: http://lkml.kernel.org/r/20171007030159.22241-2-alexander.levin@verizon.comSigned-off-by:
-
Peter Zijlstra authored
commit ea00f301 upstream. Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by:
Joe Konno <joe.konno@linux.intel.com> Signed-off-by:
-
Will Deacon authored
commit 8fa80c50 upstream. For architectures providing their own implementation of array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to complain about out-of-range parameters using WARN_ON() results in a mess of mutually-dependent include files. Rather than unpick the dependencies, simply have the core code in nospec.h perform the checking for us. Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
-
Dan Williams authored
commit be3233fb upstream. Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by:
-
