Fix possible NULL pointer dereference in mtk_wed_detach routine checking
wo pointer is properly allocated before running mtk_wed_wo_reset() and
mtk_wed_wo_deinit().
Even if it is just a theoretical issue at the moment check wo pointer is
not NULL in mtk_wed_mcu_msg_update.
Moreover, honor mtk_wed_mcu_send_msg return value in mtk_wed_wo_reset()

Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support")
Fixes: 4c5de09e ("net: ethernet: mtk_wed: add configure wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There is a spelling mistake in a nn_dp_warn message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20221207094312.2281493-1-colin.i.king@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The BPF Makefile in net/bpf did incorrect path substitution for O=dir
builds, e.g.

  make O=/tmp/kselftest headers
  make O=/tmp/kselftest -C tools/testing/selftests

would fail in selftest builds [1] net/ with

  clang-16: error: no such file or directory: 'kselftest/net/bpf/nat6to4.c'
  clang-16: error: no input files

Add a pattern prerequisite and an order-only-prerequisite (for
creating the directory), to resolve the issue.

[1] https://lore.kernel.org/all/202212060009.34CkQmCN-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Fixes: 837a3d66 ("selftests: net: Add cross-compilation support for BPF programs")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20221206102838.272584-1-bjorn@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Petr Machata says:

====================
mlxsw: Add Spectrum-1 ip6gre support

Ido Schimmel writes:

Currently, mlxsw only supports ip6gre offload on Spectrum-2 and newer
ASICs. Spectrum-1 can also offload ip6gre tunnels, but it needs double
entry router interfaces (RIFs) for the RIFs representing these tunnels.
In addition, the RIF index needs to be even. This is handled in
patches #1-#3.

The implementation can otherwise be shared between all Spectrum
generations. This is handled in patches #4-#5.

Patch #6 moves a mlxsw ip6gre selftest to a shared directory, as ip6gre
is no longer only supported on Spectrum-2 and newer ASICs.

This work is motivated by users that require multiple GRE tunnels that
all share the same underlay VRF. Currently, mlxsw only supports
decapsulation based on the underlay destination IP (i.e., not taking the
GRE key into account), so users need to configure these tunnels with
different source IPs and IPv6 addresses are easier to spare than IPv4.

Tested using existing ip6gre forwarding selftests.
====================

Link: https://lore.kernel.org/r/cover.1670414573.git.petrm@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now that Spectrum-1 gained ip6gre support we can move the test out of
the Spectrum-2 directory.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As explained in the previous patch, the existing Spectrum-2 ip6gre
implementation can be reused for Spectrum-1. Change the Spectrum-1
ip6gre operations structure to use the common operations.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are two main differences between Spectrum-1 and newer ASICs in
terms of IP-in-IP support:

1. In Spectrum-1, RIFs representing ip6gre tunnels require two entries
   in the RIF table.

2. In Spectrum-2 and newer ASICs, packets ingress the underlay (during
   encapsulation) and egress the underlay (during decapsulation) via a
   special generic loopback RIF.

The first difference was handled in previous patches by adding the
'double_rif_entry' field to the Spectrum-1 operations structure of
ip6gre RIFs. The second difference is handled during RIF creation, by
only creating a generic loopback RIF in Spectrum-2 and newer ASICs.

Therefore, the ip6gre operations can be shared between Spectrum-1 and
newer ASIC in a similar fashion to how the ipgre operations are shared.

Rename the operations to not be Spectrum-2 specific and move them
earlier in the file so that they could later be used for Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In Spectrum-1, loopback router interfaces (RIFs) used for IP-in-IP
encapsulation with an IPv6 underlay require two RIF entries and the RIF
index must be even.

Prepare for this change by extending the RIF parameters structure with a
'double_entry' field that indicates if the RIF being created requires
two RIF entries or not. Only set it for RIFs representing ip6gre tunnels
in Spectrum-1.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, each router interface (RIF) consumes one entry in the RIFs
table. This is going to change in subsequent patches where some RIFs
will consume two table entries.

Prepare for this change by parametrizing the RIF allocation size. For
now, always pass '1'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, each router interface (RIF) consumes one entry in the RIFs
table and there are no alignment constraints. This is going to change in
subsequent patches where some RIFs will consume two table entries and
their indexes will need to be aligned to the allocation size (even).

Prepare for this change by converting the RIF index allocation to use
gen_pool with the 'gen_pool_first_fit_order_align' algorithm.

No Kconfig changes necessary as mlxsw already selects
'GENERIC_ALLOCATOR'.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, can and netfilter.

  Current release - new code bugs:

   - bonding: ipv6: correct address used in Neighbour Advertisement
     parsing (src vs dst typo)

   - fec: properly scope IRQ coalesce setup during link up to supported
     chips only

  Previous releases - regressions:

   - Bluetooth fixes for fake CSR clones (knockoffs):
       - re-add ERR_DATA_REPORTING quirk
       - fix crash when device is replugged

   - Bluetooth:
       - silence a user-triggerable dmesg error message
       - L2CAP: fix u8 overflow, oob access
       - correct vendor codec definition
       - fix support for Read Local Supported Codecs V2

   - ti: am65-cpsw: fix RGMII configuration at SPEED_10

   - mana: fix race on per-CQ variable NAPI work_done

  Previous releases - always broken:

   - af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
     avoid null-deref

   - af_can: fix NULL pointer dereference in can_rcv_filter

   - can: slcan: fix UAF with a freed work

   - can: can327: flush TX_work on ldisc .close()

   - macsec: add missing attribute validation for offload

   - ipv6: avoid use-after-free in ip6_fragment()

   - nft_set_pipapo: actually validate intervals in fields after the
     first one

   - mvneta: prevent oob access in mvneta_config_rss()

   - ipv4: fix incorrect route flushing when table ID 0 is used, or when
     source address is deleted

   - phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"

* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
  s390/qeth: fix use-after-free in hsci
  macsec: add missing attribute validation for offload
  net: mvneta: Fix an out of bounds check
  net: thunderbolt: fix memory leak in tbnet_open()
  ipv6: avoid use-after-free in ip6_fragment()
  net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
  net: phy: mxl-gpy: add MDINT workaround
  net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
  xen/netback: don't call kfree_skb() under spin_lock_irqsave()
  dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
  ethernet: aeroflex: fix potential skb leak in greth_init_rings()
  tipc: call tipc_lxc_xmit without holding node_read_lock
  can: esd_usb: Allow REC and TEC to return to zero
  can: can327: flush TX_work on ldisc .close()
  can: slcan: fix freed work crash
  can: af_can: fix NULL pointer dereference in can_rcv_filter
  net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
  ipv4: Fix incorrect route flushing when table ID 0 is used
  ipv4: Fix incorrect route flushing when source address is deleted
  ...

Eric Dumazet says:

====================
mlx4: better BIG-TCP support

mlx4 uses a bounce buffer in TX whenever the tx descriptors
wrap around the right edge of the ring.

Size of this bounce buffer was hard coded and can be
increased if/when needed.
====================

Link: https://lore.kernel.org/r/20221207141237.2575012-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Test against MLX4_MAX_DESC_TXBBS only matters if the TX
bounce buffer is going to be used.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Google production kernel has increased MAX_SKB_FRAGS to 45
for BIG-TCP rollout.

Unfortunately mlx4 TX bounce buffer is not big enough whenever
an skb has up to 45 page fragments.

This can happen often with TCP TX zero copy, as one frag usually
holds 4096 bytes of payload (order-0 page).

Tested:
 Kernel built with MAX_SKB_FRAGS=45
 ip link set dev eth0 gso_max_size 185000
 netperf -t TCP_SENDFILE

I made sure that "ethtool -G eth0 tx 64" was properly working,
ring->full_size being set to 15.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Wei Wang <weiwan@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

MAX_DESC_SIZE is really the size of the bounce buffer used
when reaching the right side of TX ring buffer.

MAX_DESC_TXBBS get a MLX4_ prefix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Saeed Mahameed says:

====================
Support tc police jump conform-exceed attribute

The tc police action conform-exceed option defines how to handle
packets which exceed or conform to the configured bandwidth limit.
One of the possible conform-exceed values is jump, which skips over
a specified number of actions.
This series adds support for conform-exceed jump action.

The series adds platform support for branching actions by providing
true/false flow attributes to the branching action.
This is necessary for supporting police jump, as each branch may
execute a different action list.

The first five patches are preparation patches:
- Patches 1 and 2 add support for actions with no destinations (e.g. drop)
- Patch 3 refactor the code for subsequent function reuse
- Patch 4 defines an abstract way for identifying terminating actions
- Patch 5 updates action list validations logic considering branching actions

The following three patches introduce an interface for abstracting branching
actions:
- Patch 6 introduces an abstract api for defining branching actions
- Patch 7 generically instantiates the branching flow attributes using
  the abstract API

Patch 8 adds the platform support for jump actions, by executing the following
sequence:
  a. Store the jumping flow attr
  b. Identify the jump target action while iterating the actions list.
  c. Instantiate a new flow attribute after the jump target action.
     This is the flow attribute that the branching action should jump to.
  d. Set the target post action id on:
    d.1. The jumping attribute, thus realizing the jump functionality.
    d.2. The attribute preceding the target jump attr, if not terminating.

The next patches apply the platform's branching attributes to the police
action:
- Patch 9 is a refactor patch
- Patch 10 initializes the post meter table with the red/green flow attributes,
           as were initialized by the platform
- Patch 11 enables the offload of meter actions using jump conform-exceed
           value.
====================

Link: https://lore.kernel.org/all/20221203221337.29267-1-saeed@kernel.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Separate the matchall police action validation from flower validation.
Isolate the action validation logic in the police action parser.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-12-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Instantiate the post meter actions with the platform initialized branching
action attributes.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-11-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently post meter supports only the pipe/drop conform-exceed policy.
This assumption is reflected in several variable names.
Rename the following variables as a pre-step for using the generalized
branching action platform.

Rename fwd_green_rule/drop_red_rule to green_rule/red_rule respectively.
Repurpose red_counter/green_counter to act_counter/drop_counter to allow
police conform-exceed configurations that do not drop.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-10-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Identify the jump target action when iterating the action list.
Initialize the jump target attr with the jumping attribute during the
parsing phase. Initialize the jumping attr post action with the target
during the offload phase.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-9-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Initialize flow attribute for drop, accept, pipe and jump branching actions.

Instantiate a flow attribute instance according to the specified branch
control action. Store the branching attributes on the branching action
flow attribute during the parsing phase. Then, during the offload phase,
allocate the relevant mod header objects to the branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-8-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Extend the act tc api to set the branch control params aligning with
the police conform/exceed use case.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-7-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the entire flow action list is validate for offload limitations.
For example, flow with both forward and drop actions are declared invalid
due to hardware restrictions.
However, a multi-table hardware model changes the limitations from a flow
scope to a single flow attribute scope.

Apply offload limitations to flow attributes instead of the entire flow.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-6-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Extend act api to identify actions that terminate action list.
Pre-step for terminating branching actions.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-5-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

After the tc action parsing phase the flow attribute is initialized with
relevant eswitch offload objects such as tunnel, vlan, header modify and
counter attributes. The post processing is done both for fdb and post-action
attributes.

Reuse the flow attribute post parsing logic by both fdb and post-action
offloads.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-4-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently create_flow_handle() assumes a null dest pointer when there
are no destinations.
This might not be the case as the caller may pass an allocated dest
array while setting the dest_num parameter to 0.

Assert null dest array for flow rules that have no destinations (e.g. drop
rule).
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-3-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rules with drop action are not required to have a destination.
Currently the destination list is allocated with the maximum number of
destinations and passed to the fs_core layer along with the actual number
of destinations.

Remove redundant passing of dest pointer when count of dest is 0.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221203221337.29267-2-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull HID fixes from Jiri Kosina:
 "A regression fix for handling Logitech HID++ devices and memory
  corruption fixes:

   - regression fix (revert) for catch-all handling of Logitech HID++
     Bluetooth devices; there are devices that turn out not to work with
     this, and the root cause is yet to be properly understood. So we
     are dropping it for now, and it will be revisited for 6.2 or 6.3
     (Benjamin Tissoires)

   - memory corruption fix in HID core (ZhangPeng)

   - memory corruption fix in hid-lg4ff (Anastasia Belova)

   - Kconfig fix for I2C_HID (Benjamin Tissoires)

   - a few device-id specific quirks that piggy-back on top of the
     important fixes above"

* tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices"
  Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices"
  HID: usbhid: Add ALWAYS_POLL quirk for some mice
  HID: core: fix shift-out-of-bounds in hid_report_raw_event
  HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
  HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is
  HID: hid-lg4ff: Add check for empty lbuf
  HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10
  HID: uclogic: Fix frame templates for big endian architectures

Pull ARM SoC fix from Arnd Bergmann:
 "One last build fix came in, addressing a link failure when building
  without CONFIG_OUTER_CACHE"

* tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: at91: fix build for SAMA5D3 w/o L2 cache

This reverts commit 532223c8.

As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice,
but there are corner cases where hid-logitech-hidpp just gives up on
the mouse. This leads the end user with a dead mouse.

Given that we are at -rc8, we are definitively too late to find a proper
fix. We already identified 2 issues less than 24 hours after the bug
report. One in that ->match() was never designed to be used anywhere else
than in hid-generic, and the other that hid-logitech-hidpp has corner
cases where it gives up on devices it is not supposed to.

So we have no choice but postpone this patch to the next kernel release.

[0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This reverts commit 8544c812.

We need to revert commit 532223c8 ("HID: logitech-hidpp: Enable HID++
for all the Logitech Bluetooth devices") because that commit might make
hid-logitech-hidpp bind on mice that are not well enough supported by
hid-logitech-hidpp, and the end result is that the probe of those mice
is now returning -ENODEV, leaving the end user with a dead mouse.

Given that commit 8544c812 ("HID: logitech-hidpp: Remove special-casing
of Bluetooth devices") is a direct dependency of 532223c8, revert it
too.

Note that this also adapt according to commit 908d325e ("HID:
logitech-hidpp: Detect hi-res scrolling support") to re-add support of
the devices that were removed from that commit too.

I have locally an MX Master and I tested this device with that revert,
ensuring we still have high-res scrolling.
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Merge tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Export smp_send_reschedule() for modules use, fix a huge page entry
  update issue, and add documents for booting description"

* tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  docs/zh_CN: Add LoongArch booting description's translation
  docs/LoongArch: Add booting description
  LoongArch: mm: Fix huge page entry update for virtual machine
  LoongArch: Export symbol for function smp_send_reschedule()

Pull xen fix from Juergen Gross:
 "A single fix for the recent security issue XSA-423"

* tag 'for-linus-xsa-6.1-rc9b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/netback: fix build warning

Pull gpio fixes from Bartosz Golaszewski:

 - fix a memory leak in gpiolib core

 - fix reference leaks in gpio-amd8111 and gpio-rockchip

* tag 'gpio-fixes-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio/rockchip: fix refcount leak in rockchip_gpiolib_register()
  gpio: amd8111: Fix PCI device reference count leak
  gpiolib: fix memory leak in gpiochip_setup_dev()

Pull ATA fix from Damien Le Moal:

 - Avoid a NULL pointer dereference in the libahci platform code that
   can happen on initialization when a device tree does not specify
   names for the adapter clocks (from Anders)

* tag 'ata-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libahci_platform: ahci_platform_find_clk: oops, NULL pointer

memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call.  As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file.  Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.

Prior to 347c4a87 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses.  The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently
dropped the file type check with it allowing any file to slip through.
With the invarients broken, the d_name and parent accesses can now race
against renames and removals of arbitrary files and cause
use-after-free's.

Fix the bug by resurrecting the file type check in __file_cft().  Now
that cgroupfs is implemented through kernfs, checking the file
operations needs to go through a layer of indirection.  Instead, let's
check the superblock and dentry type.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 347c4a87 ("memcg: remove cgroup_event->cft")
Cc: stable@kernel.org # v3.14+
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The SJA1105 family has 45 L2 policing table entries
(SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110
(SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but
accounting for the difference in port count (5 in SJA1105 vs 10 in
SJA1110) does not fully explain the difference. Rather, the SJA1110 also
has L2 ingress policers for multicast traffic. If a packet is classified
as multicast, it will be processed by the policer index 99 + SRCPORT.

The sja1105_init_l2_policing() function initializes all L2 policers such
that they don't interfere with normal packet reception by default. To have
a common code between SJA1105 and SJA1110, the index of the multicast
policer for the port is calculated because it's an index that is out of
bounds for SJA1105 but in bounds for SJA1110, and a bounds check is
performed.

The code fails to do the proper thing when determining what to do with the
multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast"
index will be equal to 45, which is also equal to
table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes
through the check. But at the same time, SJA1105 doesn't have multicast
policers. So the code programs the SHARINDX field of an out-of-bounds
element in the L2 Policing table of the static config.

The comparison between index 45 and 45 entries should have determined the
code to not access this policer index on SJA1105, since its memory wasn't
even allocated.

With enough bad luck, the out-of-bounds write could even overwrite other
valid kernel data, but in this case, the issue was detected using KASAN.

Kernel log:

sja1105 spi5.0: Probed switch chip: SJA1105Q
==================================================================
BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340
Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8
...
Workqueue: events_unbound deferred_probe_work_func
Call trace:
...
sja1105_setup+0x1cbc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...
Allocated by task 8:
...
sja1105_setup+0x1bcc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...

Fixes: 38fbe91f ("net: dsa: sja1105: configure the multicast policers, if present")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Radu Nicolae Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20221207132347.38698-1-radu-nicolae.pirea@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KASAN found that addr was dereferenced after br2dev_event_work was freed.

==================================================================
BUG: KASAN: use-after-free in qeth_l2_br2dev_worker+0x5ba/0x6b0
Read of size 1 at addr 00000000fdcea440 by task kworker/u760:4/540
CPU: 17 PID: 540 Comm: kworker/u760:4 Tainted: G            E      6.1.0-20221128.rc7.git1.5aa3bed4ce83.300.fc36.s390x+kasan #1
Hardware name: IBM 8561 T01 703 (LPAR)
Workqueue: 0.0.8000_event qeth_l2_br2dev_worker
Call Trace:
 [<000000016944d4ce>] dump_stack_lvl+0xc6/0xf8
 [<000000016942cd9c>] print_address_description.constprop.0+0x34/0x2a0
 [<000000016942d118>] print_report+0x110/0x1f8
 [<0000000167a7bd04>] kasan_report+0xfc/0x128
 [<000000016938d79a>] qeth_l2_br2dev_worker+0x5ba/0x6b0
 [<00000001673edd1e>] process_one_work+0x76e/0x1128
 [<00000001673ee85c>] worker_thread+0x184/0x1098
 [<000000016740718a>] kthread+0x26a/0x310
 [<00000001672c606a>] __ret_from_fork+0x8a/0xe8
 [<00000001694711da>] ret_from_fork+0xa/0x40
Allocated by task 108338:
 kasan_save_stack+0x40/0x68
 kasan_set_track+0x36/0x48
 __kasan_kmalloc+0xa0/0xc0
 qeth_l2_switchdev_event+0x25a/0x738
 atomic_notifier_call_chain+0x9c/0xf8
 br_switchdev_fdb_notify+0xf4/0x110
 fdb_notify+0x122/0x180
 fdb_add_entry.constprop.0.isra.0+0x312/0x558
 br_fdb_add+0x59e/0x858
 rtnl_fdb_add+0x58a/0x928
 rtnetlink_rcv_msg+0x5f8/0x8d8
 netlink_rcv_skb+0x1f2/0x408
 netlink_unicast+0x570/0x790
 netlink_sendmsg+0x752/0xbe0
 sock_sendmsg+0xca/0x110
 ____sys_sendmsg+0x510/0x6a8
 ___sys_sendmsg+0x12a/0x180
 __sys_sendmsg+0xe6/0x168
 __do_sys_socketcall+0x3c8/0x468
 do_syscall+0x22c/0x328
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
Freed by task 540:
 kasan_save_stack+0x40/0x68
 kasan_set_track+0x36/0x48
 kasan_save_free_info+0x4c/0x68
 ____kasan_slab_free+0x14e/0x1a8
 __kasan_slab_free+0x24/0x30
 __kmem_cache_free+0x168/0x338
 qeth_l2_br2dev_worker+0x154/0x6b0
 process_one_work+0x76e/0x1128
 worker_thread+0x184/0x1098
 kthread+0x26a/0x310
 __ret_from_fork+0x8a/0xe8
 ret_from_fork+0xa/0x40
Last potentially related work creation:
 kasan_save_stack+0x40/0x68
 __kasan_record_aux_stack+0xbe/0xd0
 insert_work+0x56/0x2e8
 __queue_work+0x4ce/0xd10
 queue_work_on+0xf4/0x100
 qeth_l2_switchdev_event+0x520/0x738
 atomic_notifier_call_chain+0x9c/0xf8
 br_switchdev_fdb_notify+0xf4/0x110
 fdb_notify+0x122/0x180
 fdb_add_entry.constprop.0.isra.0+0x312/0x558
 br_fdb_add+0x59e/0x858
 rtnl_fdb_add+0x58a/0x928
 rtnetlink_rcv_msg+0x5f8/0x8d8
 netlink_rcv_skb+0x1f2/0x408
 netlink_unicast+0x570/0x790
 netlink_sendmsg+0x752/0xbe0
 sock_sendmsg+0xca/0x110
 ____sys_sendmsg+0x510/0x6a8
 ___sys_sendmsg+0x12a/0x180
 __sys_sendmsg+0xe6/0x168
 __do_sys_socketcall+0x3c8/0x468
 do_syscall+0x22c/0x328
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
Second to last potentially related work creation:
 kasan_save_stack+0x40/0x68
 __kasan_record_aux_stack+0xbe/0xd0
 kvfree_call_rcu+0xb2/0x760
 kernfs_unlink_open_file+0x348/0x430
 kernfs_fop_release+0xc2/0x320
 __fput+0x1ae/0x768
 task_work_run+0x1bc/0x298
 exit_to_user_mode_prepare+0x1a0/0x1a8
 __do_syscall+0x94/0xf0
 system_call+0x82/0xb0
The buggy address belongs to the object at 00000000fdcea400
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 64 bytes inside of
 96-byte region [00000000fdcea400, 00000000fdcea460)
The buggy address belongs to the physical page:
page:000000005a9c26e8 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xfdcea
flags: 0x3ffff00000000200(slab|node=0|zone=1|lastcpupid=0x1ffff)
raw: 3ffff00000000200 0000000000000000 0000000100000122 000000008008cc00
raw: 0000000000000000 0020004100000000 ffffffff00000001 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
 00000000fdcea300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 00000000fdcea380: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
>00000000fdcea400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                                           ^
 00000000fdcea480: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 00000000fdcea500: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
==================================================================

Fixes: f7936b7b ("s390/qeth: Update MACs of LEARNING_SYNC device")
Reported-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20221207105304.20494-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing attribute validation for IFLA_MACSEC_OFFLOAD
to the netlink policy.

Fixes: 791bb3fc ("net: macsec: add support for specifying offload upon link creation")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20221207101618.989-1-ehakim@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>