Syzbot reported skb_over_panic() in llc_pdu_init_as_xid_cmd(). The
problem was in wrong LCC header manipulations.

Syzbot's reproducer tries to send XID packet. llc_ui_sendmsg() is
doing following steps:

	1. skb allocation with size = len + header size
		len is passed from userpace and header size
		is 3 since addr->sllc_xid is set.

	2. skb_reserve() for header_len = 3
	3. filling all other space with memcpy_from_msg()

Ok, at this moment we have fully loaded skb, only headers needs to be
filled.

Then code comes to llc_sap_action_send_xid_c(). This function pushes 3
bytes for LLC PDU header and initializes it. Then comes
llc_pdu_init_as_xid_cmd(). It initalizes next 3 bytes *AFTER* LLC PDU
header and call skb_push(skb, 3). This looks wrong for 2 reasons:

	1. Bytes rigth after LLC header are user data, so this function
	   was overwriting payload.

	2. skb_push(skb, 3) call can cause skb_over_panic() since
	   all free space was filled in llc_ui_sendmsg(). (This can
	   happen is user passed 686 len: 686 + 14 (eth header) + 3 (LLC
	   header) = 703. SKB_DATA_ALIGN(703) = 704)

So, in this patch I added 2 new private constansts: LLC_PDU_TYPE_U_XID
and LLC_PDU_LEN_U_XID. LLC_PDU_LEN_U_XID is used to correctly reserve
header size to handle LLC + XID case. LLC_PDU_TYPE_U_XID is used by
llc_pdu_header_init() function to push 6 bytes instead of 3. And finally
I removed skb_push() call from llc_pdu_init_as_xid_cmd().

This changes should not affect other parts of LLC, since after
all steps we just transmit buffer.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+5e5a981ad7cc54c4b2b4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NIX_RX_SW_SYNC ensures all existing transactions are finished and
pkts are written to LLC/DRAM, queues should be teared down after
successful SW_SYNC. Due to a HW errata, in some rare scenarios
an existing transaction might end after SW_SYNC operation. To
ensure operation is fully done, do the SW_SYNC twice.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we return when bnxt_open() fails in bnxt_fw_reset_task(),
there is no need to check for 'rc' value again before invoking
bnxt_reenable_sriov().

Fixes: 3958b1da ("bnxt_en: fix error path of FW reset")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver
has already acquired the spin lock, so the driver should not call 'ssleep'
in atomic context.

This bug can be fixed by using 'mdelay' instead of 'ssleep'.
Reported-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp_inet6addr_event deletes 'addr' from 'local_addr_list' when setting
netdev down, but it is possible to delete the incorrect entry (match
the first one with the same ipaddr, but the different 'ifindex'), if
there are some netdevs with the same 'local-link' ipaddr added already.
It should delete the entry depending on 'sin6_addr' and 'sin6_scope_id'
both. otherwise, the endpoint will call 'sctp_sf_ootb' if it can't find
the according association when receives 'heartbeat', and finally will
reply 'abort'.

For example:
1.when linux startup
the entries in local_addr_list:
ifindex:35 addr:fe80::40:43ff:fe80:0 (eths0.201)
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)

the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.209
local fe80::40:43ff:fe80:0 dev eths0.210

2.after 'ifconfig eths0.209 down'
the entries in local_addr_list:
ifindex:36 addr:fe80::40:43ff:fe80:0 (eths0.209)
ifindex:37 addr:fe80::40:43ff:fe80:0 (eths0.210)

the route table:
local fe80::40:43ff:fe80:0 dev eths0.201
local fe80::40:43ff:fe80:0 dev eths0.210

3.asoc not found for src:[fe80::40:43ff:fe80:0]:37381 dst:[:1]:53335
::1->fe80::40:43ff:fe80:0 HEARTBEAT
fe80::40:43ff:fe80:0->::1 ABORT
Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Assign dwmac5_est_irq_status to est_irq_status callback function for
GMAC 4.10 and 5.10. With this, EST related interrupts could be handled
properly.

Fixes: e49aa315 ("net: stmmac: EST interrupts handling and error reporting")
Cc: <stable@vger.kernel.org> # 5.13.x
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Acked-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: improve the pmtu probe in Search Complete state

Timo recently suggested to use the loss of (data) packets as
indication to send pmtu probe for Search Complete state, which
should also be implied by RFC8899. This patchset is to change
the current one that is doing probe with current pmtu all the
time.

v1->v2:
  - see Patch 2/2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch is to introduce last_rtx_chunks into sctp_transport to detect
if there's any packet retransmission/loss happened by checking against
asoc's rtx_data_chunks in sctp_transport_pl_send().

If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks,
the pmtu probe will be sent out. Otherwise, increment the pl.raise_count
and return when it's in Search Complete state.

With this patch, if in Search Complete state, which is a long period, it
doesn't need to keep probing the current pmtu unless there's data packet
loss. This will save quite some traffic.

v1->v2:
  - add the missing Fixes tag.

Fixes: 0dac127c ("sctp: do black hole detection in search complete state")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does 3 things:

  - make sctp_transport_pl_send() and sctp_transport_pl_recv()
    return bool type to decide if more probe is needed to send.

  - pr_debug() only when probe is really needed to send.

  - count pl.raise_count in sctp_transport_pl_send() instead of
    sctp_transport_pl_recv(), and it's only incremented for the
    1st probe for the same size.

These are preparations for the next patch to make probes happen
only when there's packet loss in Search Complete state.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The list_for_each_entry() iterator, "vlan" in this code, can never be
NULL so the warning will never be printed.
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'err'.

Eliminate the follow smatch warning:

drivers/net/ethernet/mellanox/mlx4/main.c:3538 mlx4_load_one() warn:
missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 7ae0e400 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restore PHY_ID_BCM54811 accidently removed by commit 5d4358ed.

Fixes: 5d4358ed ("net: phy: broadcom: Allow BCM54210E to configure APD")
Signed-off-by: Kevin Lo <kevlo@kevlo.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge commit cited in fixes tag was incorrect. Due to it phys_port_name
of the virtual port resulted in incorrect name.

Also the phys_port_name of the physical port was written twice due to
the merge error.

Fix it by removing the old code and inserting back the misplaced code.

Related commits of interest in net and net-next branches that resulted
in merge conflict are:

in net-next branch:
commit f285f37c ("devlink: append split port number to the port name")

in net branch:
commit b28d8f0c ("devlink: Correct VIRTUAL port to not have phys_port attributes")

Fixes: 12628565 ("Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid configure backpressure for LBK links as they
don't support it and enable lmacs before configuration
pause frames.

Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the existing code while changing the number of TX/RX
queues using ethtool the PF/VF interface resources are
freed and reallocated (otx2_stop and otx2_open is called)
if the device is in running state. If any resource allocation
fails in otx2_open, driver free already allocated resources
and return. But again, when the number of queues changes
as the device state still running oxt2_stop is called.
In which we try to free already freed resources leading
to driver crash.
This patch fixes the issue by setting the INTF_DOWN flag on
error and free the resources in otx2_stop only if the flag is
not set.

Fixes: 50fe6c02 ("octeontx2-pf: Register and handle link notifications")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently PKINDs are not assigned to LBK channels.
The default value of LBK_CHX_PKIND (channel to PKIND mapping) register
is zero, which is resulting in a overlap of pkind between LBK and CGX
LMACs. When KPU1 parser config is modified when PTP timestamping is
enabled on the CGX LMAC interface it is impacting traffic on LBK
interfaces as well.

This patch fixes the issue by reserving the PKIND#0 for LBK devices.
CGX mapped PF pkind starts from 1 and also fixes the max pkind available.

Fixes: 42157217 ("octeontx2-af: Support to enable/disable HW timestamping")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We use the timecounter APIs for the 48-bit PHC and packet timestamps.
We must periodically update the timecounter at roughly half the
overflow interval.  The overflow interval is about 78 hours, so
update it every 19 hours (1/4 interval) for some extra margins.

Fixes: 390862f4 ("bnxt_en: Get the full 48-bit hardware timestamp periodically")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One skb's skb_shinfo frags are not writable, and they can be shared with
other skbs' like by pskb_copy(). To write the frags may cause other skb's
data crash.

So before doing en/decryption, skb_cow_data() should always be called for
a cloned or nonlinear skb if req dst is using the same sg as req src.
While at it, the likely branch can be removed, as it will be covered
by skb_cow_data().

Note that esp_input() has the same issue, and I will fix it in another
patch. tipc_aead_encrypt() doesn't have this issue, as it only processes
linear data in the unlikely branch.

Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-5.14-20210724' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

linux-can-fixes-for-5.14-20210724

Marc Kleine-Budde says:

====================
pull-request: can 2021-07-24

this is a pull request of 6 patches for net/master.

The first patch is by Joakim Zhang targets the imx8mp device tree. It
removes the imx6 fallback from the flexcan binding, as the imx6 is not
compatible with the imx8mp.

Ziyang Xuan contributes a patch to fix a use-after-free in the CAN
raw's raw_setsockopt().

The next two patches target the CAN J1939 protocol. The first one is
by Oleksij Rempel and clarifies the lifetime of session object in
j1939_session_deactivate(). Zhang Changzhong's patch fixes the timeout
value between consecutive TP.DT.

Stephane Grosjean contributes a patch for the peak_usb driver to fix
reading of the rxerr/txerr values.

The last patch is by me for the mcp251xfd driver. It stops the
timestamp worker in case of a fatal error in the IRQ handler.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case an error occurred in the IRQ handler, the chip status is
dumped via devcoredump and all IRQs are disabled, but the chip stays
powered for further analysis.

The chip is in an undefined state and will not receive any CAN frames,
so shut down the timestamping worker, which reads the TBC register
regularly, too. This avoids any CRC read error messages if there is a
communication problem with the chip.

Fixes: efd8d98d ("can: mcp251xfd: add HW timestamp infrastructure")
Link: https://lore.kernel.org/r/20210724155131.471303-1-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

This patch fixes an incorrect way of reading error counters in messages
received for this purpose from the PCAN-USB interface. These messages
inform about the increase or decrease of the error counters, whose values
are placed in bytes 1 and 2 of the message data (not 0 and 1).

Fixes: ea8b33bd ("can: pcan_usb: add support of rxerr/txerr counters")
Link: https://lore.kernel.org/r/20210625130931.27438-4-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

For receive side, the max time interval between two consecutive TP.DT
should be 750ms.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/1625569210-47506-1-git-send-email-zhangchangzhong@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

The j1939_session_deactivate() is decrementing the session ref-count and
potentially can free() the session. This would cause use-after-free
situation.

However, the code calling j1939_session_deactivate() does always hold
another reference to the session, so that it would not be free()ed in
this code path.

This patch adds a comment to make this clear and a WARN_ON, to ensure
that future changes will not violate this requirement. Further this
patch avoids dereferencing the session pointer as a precaution to avoid
use-after-free if the session is actually free()ed.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/r/20210714111602.24021-1-o.rempel@pengutronix.deReported-by: Xiaochen Zou <xzou017@ucr.edu>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We get a bug during ltp can_filter test as following.

===========================================
[60919.264984] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[60919.265223] PGD 8000003dda726067 P4D 8000003dda726067 PUD 3dda727067 PMD 0
[60919.265443] Oops: 0000 [#1] SMP PTI
[60919.265550] CPU: 30 PID: 3638365 Comm: can_filter Kdump: loaded Tainted: G        W         4.19.90+ #1
[60919.266068] RIP: 0010:selinux_socket_sock_rcv_skb+0x3e/0x200
[60919.293289] RSP: 0018:ffff8d53bfc03cf8 EFLAGS: 00010246
[60919.307140] RAX: 0000000000000000 RBX: 000000000000001d RCX: 0000000000000007
[60919.320756] RDX: 0000000000000001 RSI: ffff8d5104a8ed00 RDI: ffff8d53bfc03d30
[60919.334319] RBP: ffff8d9338056800 R08: ffff8d53bfc29d80 R09: 0000000000000001
[60919.347969] R10: ffff8d53bfc03ec0 R11: ffffb8526ef47c98 R12: ffff8d53bfc03d30
[60919.350320] perf: interrupt took too long (3063 > 2500), lowering kernel.perf_event_max_sample_rate to 65000
[60919.361148] R13: 0000000000000001 R14: ffff8d53bcf90000 R15: 0000000000000000
[60919.361151] FS:  00007fb78b6b3600(0000) GS:ffff8d53bfc00000(0000) knlGS:0000000000000000
[60919.400812] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[60919.413730] CR2: 0000000000000010 CR3: 0000003e3f784006 CR4: 00000000007606e0
[60919.426479] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[60919.439339] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[60919.451608] PKRU: 55555554
[60919.463622] Call Trace:
[60919.475617]  <IRQ>
[60919.487122]  ? update_load_avg+0x89/0x5d0
[60919.498478]  ? update_load_avg+0x89/0x5d0
[60919.509822]  ? account_entity_enqueue+0xc5/0xf0
[60919.520709]  security_sock_rcv_skb+0x2a/0x40
[60919.531413]  sk_filter_trim_cap+0x47/0x1b0
[60919.542178]  ? kmem_cache_alloc+0x38/0x1b0
[60919.552444]  sock_queue_rcv_skb+0x17/0x30
[60919.562477]  raw_rcv+0x110/0x190 [can_raw]
[60919.572539]  can_rcv_filter+0xbc/0x1b0 [can]
[60919.582173]  can_receive+0x6b/0xb0 [can]
[60919.591595]  can_rcv+0x31/0x70 [can]
[60919.600783]  __netif_receive_skb_one_core+0x5a/0x80
[60919.609864]  process_backlog+0x9b/0x150
[60919.618691]  net_rx_action+0x156/0x400
[60919.627310]  ? sched_clock_cpu+0xc/0xa0
[60919.635714]  __do_softirq+0xe8/0x2e9
[60919.644161]  do_softirq_own_stack+0x2a/0x40
[60919.652154]  </IRQ>
[60919.659899]  do_softirq.part.17+0x4f/0x60
[60919.667475]  __local_bh_enable_ip+0x60/0x70
[60919.675089]  __dev_queue_xmit+0x539/0x920
[60919.682267]  ? finish_wait+0x80/0x80
[60919.689218]  ? finish_wait+0x80/0x80
[60919.695886]  ? sock_alloc_send_pskb+0x211/0x230
[60919.702395]  ? can_send+0xe5/0x1f0 [can]
[60919.708882]  can_send+0xe5/0x1f0 [can]
[60919.715037]  raw_sendmsg+0x16d/0x268 [can_raw]

It's because raw_setsockopt() concurrently with
unregister_netdevice_many(). Concurrent scenario as following.

	cpu0						cpu1
raw_bind
raw_setsockopt					unregister_netdevice_many
						unlist_netdevice
dev_get_by_index				raw_notifier
raw_enable_filters				......
can_rx_register
can_rcv_list_find(..., net->can.rx_alldev_list)

......

sock_close
raw_release(sock_a)

......

can_receive
can_rcv_filter(net->can.rx_alldev_list, ...)
raw_rcv(skb, sock_a)
BUG

After unlist_netdevice(), dev_get_by_index() return NULL in
raw_setsockopt(). Function raw_enable_filters() will add sock
and can_filter to net->can.rx_alldev_list. Then the sock is closed.
Followed by, we sock_sendmsg() to a new vcan device use the same
can_filter. Protocol stack match the old receiver whose sock has
been released on net->can.rx_alldev_list in can_rcv_filter().
Function raw_rcv() uses the freed sock. UAF BUG is triggered.

We can find that the key issue is that net_device has not been
protected in raw_setsockopt(). Use rtnl_lock to protect net_device
in raw_setsockopt().

Fixes: c18ce101 ("[CAN]: Add raw protocol")
Link: https://lore.kernel.org/r/20210722070819.1048263-1-william.xuanziyang@huawei.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

FlexCAN on i.MX8MP is not derived from i.MX6Q, instead reuses from
i.MX8QM with extra ECC added and default is enabled, so that the FlexCAN
would be put into freeze mode without FLEXCAN_QUIRK_DISABLE_MECR quirk.

This patch removes "fsl,imx6q-flexcan" fallback compatible string since
it's not compatible with the i.MX6Q.

Link: https://lore.kernel.org/r/20210719073437.32078-1-qiangqing.zhang@nxp.comSigned-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Shannon Nelson says:

====================
ionic: bug fixes

Fix a thread race in rx_mode, remove unnecessary log message,
fix dynamic coalescing issues, and count all csum_none cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Be sure to count the csum_none cases when csum offload is
enabled.

Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to count the correct Tx and/or Rx packets for dynamic
interrupt moderation, depending on which we're processing on
the queue interrupt.

Fixes: 04a83459 ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the interrupt coalesce value update out of the napi
thread and into the dim_work thread and set it only when it
has actually changed.

Fixes: 04a83459 ("ionic: dynamic interrupt moderation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

If PTP configuration is attempted on ports that don't support
it, such as VF ports, the driver will return an error status
-95, or EOPNOSUPP and print an error message
    enp98s0: hwstamp set failed: -95

Because some daemons can retry every few seconds, this can end
up filling the dmesg log and pushing out other more useful
messages.

We can catch this issue earlier in our handling and return
the error without a log message.

Fixes: 829600ce ("ionic: add ts_config replay")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the bulk of the code from ionic_set_rx_mode(), which
can be called from atomic context, into ionic_lif_rx_mode()
which is a safe context.

A call from the stack will get pushed off into a work thread,
but it is also possible to simultaneously have a call driven
by a queue reconfig request from an ethtool command or fw
recovery event.  We add a mutex around the rx_mode work to be
sure they don't collide.

Fixes: 81dbc241 ("ionic: change set_rx_mode from_ndo to can_sleep")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-07-23

This series contains updates to i40e driver only.

Arkadiusz corrects the order of calls for disabling queues to resolve
a false error message and adds a better message to the user when
transitioning FW LLDP back on while the firmware is still processing
the off request.

Lukasz adds additional information regarding possible incorrect cable
use when a PHY type error occurs.

Jedrzej adds ndo_select_queue support to resolve incorrect queue
selection when SW DCB is used and adds a warning when there are not
enough queues for desired TC configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'mac80211-for-net-2021-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Couple of fixes:
 * fix aggregation on mesh
 * fix late enabling of 4-addr mode
 * leave monitor SKBs with some headroom
 * limit band information for old applications
 * fix virt-wifi WARN_ON
 * fix memory leak in cfg80211 BSS list maintenance

Commit 7930742d, reverting 26fd962b, missed out on reverting an incorrect
change to a return value.  The niu_pci_vpd_scan_props(..) == 1 case appears
to be a normal path - treating it as an error and return -EINVAL was
breaking VPD_SCAN and causing the driver to fail to load.

Fix, so my Neptune card works again.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Shannon Nelson <shannon.lee.nelson@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Fixes: 7930742d ('Revert "niu: fix missing checks of niu_pci_eeprom_read"')
Signed-off-by: Paul Jakma <paul@jakma.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syzbot reported memory leak in qrtr. The problem was in unputted
struct sock. qrtr_local_enqueue() function calls qrtr_port_lookup()
which takes sock reference if port was found. Then there is the following
check:

if (!ipc || &ipc->sk == skb->sk) {
	...
	return -ENODEV;
}

Since we should drop the reference before returning from this function and
ipc can be non-NULL inside this if, we should add qrtr_port_put() inside
this if.

The similar corner case is in qrtr_endpoint_post() as Manivannan
reported. In case of sock_queue_rcv_skb() failure we need to put
port reference to avoid leaking struct sock pointer.

Fixes: e04df98a ("net: qrtr: Remove receive worker")
Fixes: bdabad3e ("net: Add Qualcomm IPC router")
Reported-and-tested-by: syzbot+35a511c72ea7356cdcf3@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayusosays:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Memleak in commit audit error path, from Dongliang Mu.

2) Avoid possible false sharing for flowtable timeout updates
   and nft_last use.

3) Adjust conntrack timestamp due to garbage collection delay,
   from Florian Westphal.

4) Fix nft_nat without layer 3 address for the inet family.

5) Fix compilation warning in nfnl_hook when ingress support
   is disabled, from Arnd Bergmann.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Get the number of VFs of a PF correctly by calling
rvu_get_pf_numvfs in rvu_switch_disable function.
Also hwvf is not required hence remove it.

Fixes: 23109f8d ("octeontx2-af: Introduce internal packet switching")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A wwan link created via the wwan_create_default_link procedure is
never notified to the user (RTM_NEWLINK), causing issues with user
tools relying on such event to track network links (NetworkManager).

This is because the procedure misses a call to rtnl_configure_link(),
which sets the link as initialized and notifies the new link (cf
proper usage in __rtnl_newlink()).

Cc: stable@vger.kernel.org
Fixes: ca374290 ("wwan: core: support default netdev creation")
Suggested-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit modified the driver to accept the addition of VID 0
without doing anything, but deleting that VID still fails:

[   32.080780] mv88e6085 d0032004.mdio-mii:10 lan8: failed to kill vid 0081/0

Modify mv88e6xxx_port_vlan_leave() to do the same thing as the addition.

Fixes: b8b79c41 ("net: dsa: mv88e6xxx: Fix adding vlan 0")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Decrease hop limit counter when deliver skb to ndp proxy.
Signed-off-by: Kangmin Park <l4stpr0gr4m@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>