- 01 Nov, 2017 3 commits
-
-
Guillaume Nault authored
These variables have never been used. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
With conversion to refcount_t, such manual debugging code doesn't make sense anymore. The tunnel part was already dropped by 54652eb1 ("l2tp: hold tunnel while looking up sessions in l2tp_netlink"). Signed-off-by:
-
Guillaume Nault authored
The ->ref() and ->deref() callbacks are unused since PPP stopped using them in ee40fb2e ("l2tp: protect sock pointer of struct pppol2tp_session with RCU"). We can thus remove them from struct l2tp_session and drop the do_ref parameter of l2tp_session_get*(). Signed-off-by:
-
- 31 Oct, 2017 1 commit
-
-
Jakub Kicinski authored
bpf_getsockopt bpf call sets the ret variable to zero and never changes it. What's worse in case CONFIG_INET is not selected the variable is completely unused generating a warning. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Quentin Monnet <quentin.monnet@netronome.com> Acked-by:
Lawrence Brakmo <brakmo@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
- 30 Oct, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Several conflicts here. NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to nfp_fl_output() needed some adjustments because the code block is in an else block now. Parallel additions to net/pkt_cls.h and net/sch_generic.h A bug fix in __tcp_retransmit_skb() conflicted with some of the rbtree changes in net-next. The tc action RCU callback fixes in 'net' had some overlap with some of the recent tcf_block reworking. Signed-off-by:
-
- 29 Oct, 2017 35 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix route leak in xfrm_bundle_create(). 2) In mac80211, validate user rate mask before configuring it. From Johannes Berg. 3) Properly enforce memory limits in fair queueing code, from Toke Hoiland-Jorgensen. 4) Fix lockdep splat in inet_csk_route_req(), from Eric Dumazet. 5) Fix TSO header allocation and management in mvpp2 driver, from Yan Markman. 6) Don't take socket lock in BH handler in strparser code, from Tom Herbert. 7) Don't show sockets from other namespaces in AF_UNIX code, from Andrei Vagin. 8) Fix double free in error path of tap_open(), from Girish Moodalbail. 9) Fix TX map failure path in igb and ixgbe, from Jean-Philippe Brucker and Alexander Duyck. 10) Fix DCB mode programming in stmmac driver, from Jose Abreu. 11) Fix err_count handling in various tunnels (ipip, ip6_gre). From Xin Long. 12) Properly align SKB head before building SKB in tuntap, from Jason Wang. 13) Avoid matching qdiscs with a zero handle during lookups, from Cong Wang. 14) Fix various endianness bugs in sctp, from Xin Long. 15) Fix tc filter callback races and add selftests which trigger the problem, from Cong Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (73 commits) selftests: Introduce a new test case to tc testsuite selftests: Introduce a new script to generate tc batch file net_sched: fix call_rcu() race on act_sample module removal net_sched: add rtnl assertion to tcf_exts_destroy() net_sched: use tcf_queue_work() in tcindex filter net_sched: use tcf_queue_work() in rsvp filter net_sched: use tcf_queue_work() in route filter net_sched: use tcf_queue_work() in u32 filter net_sched: use tcf_queue_work() in matchall filter net_sched: use tcf_queue_work() in fw filter net_sched: use tcf_queue_work() in flower filter net_sched: use tcf_queue_work() in flow filter net_sched: use tcf_queue_work() in cgroup filter net_sched: use tcf_queue_work() in bpf filter net_sched: use tcf_queue_work() in basic filter net_sched: introduce a workqueue for RCU callbacks of tc filter sctp: fix some type cast warnings introduced since very beginning sctp: fix a type cast warnings that causes a_rwnd gets the wrong value sctp: fix some type cast warnings introduced by transport rhashtable sctp: fix some type cast warnings introduced by stream reconf ... -
David S. Miller authored
Cong Wang says: ==================== net_sched: fix races with RCU callbacks Recently, the RCU callbacks used in TC filters and TC actions keep drawing my attention, they introduce at least 4 race condition bugs: 1. A simple one fixed by Daniel: commit c78e1746 Author: Daniel Borkmann <daniel@iogearbox.net> Date: Wed May 20 17:13:33 2015 +0200 net: sched: fix call_rcu() race on classifier module unloads 2. A very nasty one fixed by me: commit 1697c4bb Author: Cong Wang <xiyou.wangcong@gmail.com> Date: Mon Sep 11 16:33:32 2017 -0700 net_sched: carefully handle tcf_block_put() 3. Two more bugs found by Chris: https://patchwork.ozlabs.org/patch/826696/ https://patchwork.ozlabs.org/patch/826695/ Usually RCU callbacks are simple, however for TC filters and actions, they are complex because at least TC actions could be destroyed together with the TC filter in one callback. And RCU callbacks are invoked in BH context, without locking they are parallel too. All of these contribute to the cause of these nasty bugs. Alternatively, we could also: a) Introduce a spinlock to serialize these RCU callbacks. But as I said in commit 1697c4bb ("net_sched: carefully handle tcf_block_put()"), it is very hard to do because of tcf_chain_dump(). Potentially we need to do a lot of work to make it possible (if not impossible). b) Just get rid of these RCU callbacks, because they are not necessary at all, callers of these call_rcu() are all on slow paths and holding RTNL lock, so blocking is allowed in their contexts. However, David and Eric dislike adding synchronize_rcu() here. As suggested by Paul, we could defer the work to a workqueue and gain the permission of holding RTNL again without any performance impact, however, in tcf_block_put() we could have a deadlock when flushing workqueue while hodling RTNL lock, the trick here is to defer the work itself in workqueue and make it queued after all other works so that we keep the same ordering to avoid any use-after-free. Please see the first patch for details. Patch 1 introduces the infrastructure, patch 2~12 move each tc filter to the new tc filter workqueue, patch 13 adds an assertion to catch potential bugs like this, patch 14 closes another rcu callback race, patch 15 and patch 16 add new test cases. ==================== Reported-by:
Chris Mi <chrism@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Chris Mi authored
In this patchset, we fixed a tc bug. This patch adds the test case that reproduces the bug. To run this test case, user should specify an existing NIC device: # sudo ./tdc.py -d enp4s0f0 This test case belongs to category "flower". If user doesn't specify a NIC device, the test cases belong to "flower" will not be run. In this test case, we create 1M filters and all filters share the same action. When destroying all filters, kernel should not panic. It takes about 18s to run it. Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Acked-by:
Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
-
Chris Mi authored
# ./tdc_batch.py -h usage: tdc_batch.py [-h] [-n NUMBER] [-o] [-s] [-p] device file TC batch file generator positional arguments: device device name file batch file name optional arguments: -h, --help show this help message and exit -n NUMBER, --number NUMBER how many lines in batch file -o, --skip_sw skip_sw (offload), by default skip_hw -s, --share_action all filters share the same action -p, --prio all filters have different prio Acked-by: -
Cong Wang authored
Similar to commit c78e1746 ("net: sched: fix call_rcu() race on classifier module unloads"), we need to wait for flying RCU callback tcf_sample_cleanup_rcu(). Cc: Yotam Gigi <yotamg@mellanox.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
After previous patches, it is now safe to claim that tcf_exts_destroy() is always called with RTNL lock. Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Pirko <jiri@resnulli.us> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
Defer the tcf_exts_destroy() in RCU callback to tc filter workqueue and get RTNL lock. Reported-by:
-
Cong Wang authored
This patch introduces a dedicated workqueue for tc filters so that each tc filter's RCU callback could defer their action destroy work to this workqueue. The helper tcf_queue_work() is introduced for them to use. Because we hold RTNL lock when calling tcf_block_put(), we can not simply flush works inside it, therefore we have to defer it again to this workqueue and make sure all flying RCU callbacks have already queued their work before this one, in other words, to ensure this is the last one to execute to prevent any use-after-free. On the other hand, this makes tcf_block_put() ugly and harder to understand. Since David and Eric strongly dislike adding synchronize_rcu(), this is probably the only solution that could make everyone happy. Please also see the code comments below. Reported-by:
-
David S. Miller authored
Mahesh Bandewar says: ==================== add 'private' and 'vepa' attributes to ipvlan modes IPvlan has always been operating in bridge-mode for its supported modes i.e. if the packets are destined to the adjacent neighbor dev, then IPvlan driver will switch the packet internally without needing the packets to hit the wire or get routed. However, there are situations where this bridge-mode is not needed. e.g. two private processes running inside two namespaces which are having one IPvlan slave each for its namespace but sharing the master. These processes should reach the outside world through the master device but at the same time the bridge function should not work. Currently that's not possible hence the private attribute for the selected mode comes in play. VEPA or 802.1Qbg on the other hand has limited appeal with IPvlan since IPvlan uses the mac-address of the lower device. So packets that are destined to the adjacent neighbor slave-dev will have same src and dest mac. When these packets reach the external switch/router, they will send you the redirect message which the host will have to deal with. Having said that this attribute will have appeal in debugging as IPvlan will not switch / short-circuit packets internally. e.g. using VEPA mode with lower-device in loopback mode will avoid some complicated set-ups that use non-local-bind with some route jugglery. This patch-set implements these attributes for the existing modes that IPvlan has. Please see individual patches for their detailed implementation. A subsequent ip-utils patch is needed and will be sent soon. ==================== Signed-off-by: -
Mahesh Bandewar authored
This is very similar to the Macvlan VEPA mode, however, there is some difference. IPvlan uses the mac-address of the lower device, so the VEPA mode has implications of ICMP-redirects for packets destined for its immediate neighbors sharing same master since the packets will have same source and dest mac. The external switch/router will send redirect msg. Having said that, this will be useful tool in terms of debugging since IPvlan will not switch packets within its slaves and rely completely on the external entity as intended in 802.1Qbg. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
IPvlan has always operated in bridge mode. However there are scenarios where each slave should be able to talk through the master device but not necessarily across each other. Think of an environment where each of a namespace is a private and independant customer. In this scenario the machine which is hosting these namespaces neither want to tell who their neighbor is nor the individual namespaces care to talk to neighbor on short-circuited network path. This patch implements the mode that is very similar to the 'private' mode in macvlan where individual slaves can send and receive traffic through the master device, just that they can not talk among slave devices. Signed-off-by:
-
Quentin Monnet authored
Add a completion file for bash. The completion function runs bpftool when needed, making it smart enough to help users complete ids or tags for eBPF programs and maps currently on the system. Update Makefile to install completion file to /usr/share/bash-completion/completions when running `make install`. Emacs file mode and (at the end) Vim modeline have been added, to keep the style in use for most existing bash completion files. In this, it differs from tools/perf/perf-completion.sh, which seems to be the only other completion file among the kernel sources repository. This is also valid for indent style: 4-space indents, as in other completion files. Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: a bunch of fixes for some sparse warnings As Eric noticed, when running 'make C=2 M=net/sctp/', a plenty of warnings or errors checked by sparse appear. They are all problems about Endian and type cast. Most of them are just warnings by which no issues could be caused while some might be bugs. This patchset fixes them with four patches basically according to how they are introduced. ==================== Signed-off-by: -
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are there since very beginning. Note after this patch, there still one warning left in sctp_outq_flush(): sctp_chunk_fail(chunk, SCTP_ERROR_INV_STRM) Since it has been moved to sctp_stream_outq_migrate on net-next, to avoid the extra job when merging net-next to net, I will post the fix for it after the merging is done. Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. Commit d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") expected to use the peers old rwnd and add our flight size to the a_rwnd. But with the wrong Endian, it may not work as well as expected. So fix it by converting to the right value. Fixes: d4d6fb57 ("sctp: Try not to change a_rwnd when faking a SACK from SHUTDOWN.") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian for the port when coding transport rhashtable patches. Fixes: 7fda702f ("sctp: use new rhlist interface on sctp transport rhashtable") Reported-by:
-
Xin Long authored
These warnings were found by running 'make C=2 M=net/sctp/'. They are introduced by not aware of Endian when coding stream reconf patches. Since commit c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") enabled stream reconf feature for users, the Fixes tag below would use it. Fixes: c0d8bab6 ("sctp: add get and set sockopt for reconf_enable") Reported-by:
-
Cong Wang authored
Davide found the following script triggers a NULL pointer dereference: ip l a name eth0 type dummy tc q a dev eth0 parent :1 handle 1: htb This is because for a freshly created netdevice noop_qdisc is attached and when passing 'parent :1', kernel actually tries to match the major handle which is 0 and noop_qdisc has handle 0 so is matched by mistake. Commit 69012ae4 tries to fix a similar bug but still misses this case. Handle 0 is not a valid one, should be just skipped. In fact, kernel uses it as TC_H_UNSPEC. Fixes: 69012ae4 ("net: sched: fix handling of singleton qdiscs with qdisc_hash") Fixes: 59cc1f61 ("net: sched:convert qdisc linked list to hashtable") Reported-by:
Davide Caratti <dcaratti@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:224:5: warning: symbol 'aq_ethtool_get_coalesce' was not declared. Should it be static? drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c:245:5: warning: symbol 'aq_ethtool_set_coalesce' was not declared. Should it be static? Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Wei Wang authored
Cached routes should only be created by the system when receiving pmtu discovery or ip redirect msg. Users should not be allowed to create cached routes. Furthermore, after the patch series to move cached routes into exception table, user added cached routes will trigger the following warning in fib6_add(): WARNING: CPU: 0 PID: 2985 at net/ipv6/ip6_fib.c:1137 fib6_add+0x20d9/0x2c10 net/ipv6/ip6_fib.c:1137 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 2985 Comm: syzkaller320388 Not tainted 4.14.0-rc3+ #74 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:181 __warn+0x1c4/0x1d9 kernel/panic.c:542 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:178 do_trap_no_signal arch/x86/kernel/traps.c:212 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:261 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:298 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:311 invalid_op+0x18/0x20 arch/x86/entry/entry_64.S:905 RIP: 0010:fib6_add+0x20d9/0x2c10 net/ipv6/ip6_fib.c:1137 RSP: 0018:ffff8801cf09f6a0 EFLAGS: 00010297 RAX: ffff8801ce45e340 RBX: 1ffff10039e13eec RCX: ffff8801d749c814 RDX: 0000000000000000 RSI: ffff8801d749c700 RDI: ffff8801d749c780 RBP: ffff8801cf09fa08 R08: 0000000000000000 R09: ffff8801cf09f360 R10: ffff8801cf09f2d8 R11: 1ffff10039c8befb R12: 0000000000000001 R13: dffffc0000000000 R14: ffff8801d749c700 R15: ffffffff860655c0 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011 ip6_route_add+0x148/0x1a0 net/ipv6/route.c:2782 ipv6_route_ioctl+0x4d5/0x690 net/ipv6/route.c:3291 inet6_ioctl+0xef/0x1e0 net/ipv6/af_inet6.c:521 sock_do_ioctl+0x65/0xb0 net/socket.c:961 sock_ioctl+0x2c2/0x440 net/socket.c:1058 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1530 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe So we fix this by failing the attemp to add cached routes from userspace with returning EINVAL error. Fixes: 2b760fcf ("ipv6: hook up exception table to store dst cache") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
Tushar Dave authored
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure. e.g. [root@labbpf]# ./xdp_redirect_map $(</sys/class/net/eth2/ifindex) \ > $(</sys/class/net/eth3/ifindex) failed to create a map: 1 Operation not permitted The failure is 100% when multiple xdp programs are running. Fix it. Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Acked-by:
-
Tushar Dave authored
Default rlimit RLIMIT_MEMLOCK is 64KB, causes bpf map failure. e.g. [root@lab bpf]#./xdp1 -N $(</sys/class/net/eth2/ifindex) failed to create a map: 1 Operation not permitted Fix it. Signed-off-by:
-
Florian Fainelli authored
bcm_sf2 and b53 replicate the same operations: clear all VLANs and set their ports to the default VLAN tag (1 for these devices) so export the b53 function doing just that. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Felix Manlunas authored
Creating a macvtap interface with the liquidio VF driver as lower device causes this alarming message to show up in dmesg: liquidio_link_ctrl_cmd_completion Unknown cmd 27 That's actually a false alarm because cmd 27 is the value of the macro OCTNET_CMD_SET_UC_LIST which is known. It's a control command sent from host to NIC firmware to set the unicast MAC address list of the macvtap lower device. Make the false alarm go away by adding a case for OCTNET_CMD_SET_UC_LIST in liquidio_link_ctrl_cmd_completion(). Signed-off-by:Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by:
-
