- 13 Nov, 2017 20 commits
-
-
Jiri Olsa authored
Changing the way the annotation lines are allocated and adding annotation_line__(new|delete) functions to deal with this. Before the allocation schema was as follows: ----------------------------------------------------------- struct disasm_line | struct annotation_line | private space ----------------------------------------------------------- Where the private space is used in TUI code to store computed annotation data for events. The stdio code computes the data on the fly. The goal is to compute and store annotation line's data directly in the struct annotation_line itself, so this patch changes the line allocation schema as follows: ------------------------------------------------------------ privsize space | struct disasm_line | struct annotation_line ------------------------------------------------------------ Moving struct annotation_line to the end, because in following changes we will move here the non-fixed length event's data. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20171011150158.11895-15-jolsa@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Jiri Olsa authored
Move rb_node to struct annotation_line to make struct annotation_line the rb tree node for sorted lines used in both stdio and TUI code. This way we can unite the sorted lines lines codes for both TUI and stdio in the following patches. Signed-off-by:
-
Jiri Olsa authored
Rename disasm__add() into annotation_line__add() to make it work over a generic struct annotation_line. Signed-off-by:
-
Jiri Olsa authored
Rename disasm__get_next_ip_line() to annotation_line__next() to make it work over a generic struct annotation_line. Signed-off-by:
-
Jiri Olsa authored
Add evsel into struct annotate_args to reduce the number of arguments that need to travel all the way to line allocation. This change also allow us to move the arch name initialization under symbol__annotate function. Link: http://lkml.kernel.org/n/tip-a9ok53rrgt1s5e8uglyvy6qt@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
Add offset/line/line_nr into struct annotate_args to reduce the number of arguments that need to travel all the way to line allocation. Signed-off-by:
-
Jiri Olsa authored
Add map into struct annotate_args to reduce the number of arguments that need to travel all the way to line allocation. Signed-off-by:
-
Jiri Olsa authored
Add arch into struct annotate_args to reduce the number of arguments that need to travel all the way to line allocation. Signed-off-by:
-
Jiri Olsa authored
Adding struct annotate_args to reduce the number of arguments, that need to travel all the way to line allocation. This makes the code easier to read and ease up the changes for following patches. Signed-off-by:
-
Jiri Olsa authored
Add symbol__annotate function to have generic annotation function to be called for all annotation sources. It calls the generic annotation init and then the specific annotation data retrieval function. Signed-off-by:
-
Jiri Olsa authored
Move ipc/cycles into annotation_line struct to be used as generic members for any annotation source. Signed-off-by:
-
Jiri Olsa authored
Move the line/line_nr/offset menbers to the annotation_line struct to be used as generic members for any annotation source. Signed-off-by:
-
Jiri Olsa authored
In order to make the annotation support generic, addadding 'struct annotation_line', which will hold generic data common to annotation sources (such as the one for python scripts, coming on upcoming patches). Having this, we can add different annotation line support other than objdump disasm. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
When we use an initial delay, e.g.: 'perf record --delay 1000', we do not enable the events until that delay has passed after we started the workload, including the tracking event, i.e. the one for which we have attr.mmap, etc, enabled to ask the kernel to generate the PERF_RECORD_{MMAP,COMM,EXEC} metadata events that will then allow us to resolve addresses in samples to the map, dso and symbol. There will be a shadow that even synthesizing samples won't cover, i.e. the workload that we start and other processes forking while we wait for the initial delay to expire. So use a dummy event to be the tracking one and make it be enabled on exec. Before: # perf record --delay 1000 stress --cpu 1 --timeout 5 stress: info: [9029] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd stress: info: [9029] successful run completed in 5s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.624 MB perf.data (15908 samples) ] # perf script | head :9031 9031 32001.826888: 1 cycles:ppp: ffffffff831aa30d event_function (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826893: 1 cycles:ppp: ffffffff8300d1a0 intel_bts_enable_local (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826895: 7 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826897: 103 cycles:ppp: ffffffff8300c331 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826899: 1615 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826902: 26724 cycles:ppp: ffffffff8384c6a7 native_irq_return_iret (/lib/modules/4.14.0-rc6+/build/vmlinux) :9031 9031 32001.826913: 329739 cycles:ppp: 7fb2a5410932 [unknown] ([unknown]) :9031 9031 32001.827033: 1225451 cycles:ppp: 7fb2a5410930 [unknown] ([unknown]) :9031 9031 32001.827474: 1391725 cycles:ppp: 7fb2a5410930 [unknown] ([unknown]) :9031 9031 32001.827978: 1233697 cycles:ppp: 7fb2a5410928 [unknown] ([unknown]) # After: # perf record --delay 1000 stress --cpu 1 --timeout 5 stress: info: [9741] dispatching hogs: 1 cpu, 0 io, 0 vm, 0 hdd stress: info: [9741] successful run completed in 5s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.751 MB perf.data (15976 samples) ] # perf script | head stress 9742 32110.959106: 1 cycles:ppp: ffffffff831b26f6 __perf_event_task_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959110: 1 cycles:ppp: ffffffff8300c2e9 intel_pmu_handle_irq (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959112: 7 cycles:ppp: ffffffff830231e0 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959115: 101 cycles:ppp: ffffffff83023870 sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959117: 1533 cycles:ppp: ffffffff830231f8 native_sched_clock (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959119: 23992 cycles:ppp: ffffffff831b0900 ctx_sched_in (/lib/modules/4.14.0-rc6+/build/vmlinux) stress 9742 32110.959129: 329406 cycles:ppp: 7f4b1b661930 __random_r (/usr/lib64/libc-2.25.so) stress 9742 32110.959249: 1288322 cycles:ppp: 5566e1e7cbc9 hogcpu (/usr/bin/stress) stress 9742 32110.959712: 1464046 cycles:ppp: 7f4b1b66179e __random (/usr/lib64/libc-2.25.so) stress 9742 32110.960241: 1266918 cycles:ppp: 7f4b1b66195b __random_r (/usr/lib64/libc-2.25.so) # Reported-by:Bram Stolk <b.stolk@gmail.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
The evsel->idx field is used mainly to access the right bucket in per-event arrays such as the annotation ones, but also to set evsel->tracking, that in turn will decide what of the events will ask for PERF_RECORD_{MMAP,COMM,EXEC} to be generated, i.e. which perf_event_attr will have its mmap, etc fields set. When we were adding the "dummy" event using perf_evlist__add_dummy() we were not setting it correctly, which could result in multiple tracking events. Now that I'll try using a dummy event to be the tracking one when using 'perf record --delay', i.e. when we process the --delay setting we may already have the evlist set up, like with: perf record -e cycles,instructions --delay 1000 ./workload We will need to add a "dummy" event, then reset evsel->tracking for the first event, "cycles", and set it instead to the dummy one, and also setting its attr.enable_on_exec, so that we get the PERF_RECORD_MMAP, etc metadata events while waiting to enable the explicitely requested events, so lets get this straight and set the right evsel->idx. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Bram Stolk <b.stolk@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-nrdfchshqxf7diszhxcecqb9@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
To pick up fixes. Signed-off-by: -
Ingo Molnar authored
The jprobes APIs are deprecated - but are still in occasional use for code that few people seem to care about, so stop generating deprecation warnings. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
Linus Torvalds authored
The (alleged) users of the module addresses are the same: kernel profiling. So just expose the same helper and format macros, and unify the logic. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This code goes back to the historical bitkeeper tree commit 3f7b0672 ("Module section offsets in /sys/module"), where Jonathan Corbet wanted to show people how to debug loadable modules. See https://lwn.net/Articles/88052/ from June 2004. To expose the required load address information, Jonathan added the sections subdirectory for every module in /sys/modules, and made them S_IRUGO - readable by everybody. It was a more innocent time, plus those S_IRxxx macro names are a lot more confusing than the octal numbers are, so maybe it wasn't even intentional. But here we are, thirteen years later, and I'll just change it to S_IRUSR instead. Let's see if anybody even notices. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Linus Torvalds authored
Merge /proc/kallsyms pointer value restrictions. Instead of using %pK, and making it about root access (at the wrong time, no less), make the whole choice of whether to show the actual pointer value be very explicit to the kallsyms code. In particular, we can now default to not doing so, and yet avoid annoying kernel profiling by actually looking at whether kernel profiling is allowed or not (by default it is not). This is all mostly preparation for the real "let's stop leaking kernel addresses" work that Tobin Harding is working on. Small steps. * kallsyms-restrictions: stop using '%pK' for /proc/kallsyms pointer values
-
- 12 Nov, 2017 4 commits
-
-
Randy Dunlap authored
Partially revert commit 2fa36568 ("kbuild: soften MODULE_LICENSE check") so that modpost detects modules that do not have a MODULE_LICENSE. Sam's commit also changed the fatal error to a warning, which I am leaving as is. This gives advance notice of when a module has no license and will taint the kernel if the module is loaded. This produces the following warnings on x86_64 allmodconfig: MODPOST 6520 modules WARNING: modpost: missing MODULE_LICENSE() in drivers/auxdisplay/img-ascii-lcd.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-ath79.o WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/accel/kxsd9-i2c.o WARNING: modpost: missing MODULE_LICENSE() in drivers/iio/adc/qcom-vadc-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/mtk-vcodec/mtk-vcodec-common.o WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o WARNING: modpost: missing MODULE_LICENSE() in drivers/mtd/nand/denali_pci.o WARNING: modpost: missing MODULE_LICENSE() in drivers/net/phy/cortina.o WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pxa/pinctrl-pxa2xx.o WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o WARNING: modpost: missing MODULE_LICENSE() in drivers/rpmsg/qcom_glink_native.o WARNING: modpost: missing MODULE_LICENSE() in drivers/staging/comedi/drivers/ni_atmio.o WARNING: modpost: missing MODULE_LICENSE() in net/9p/9pnet_xen.o WARNING: modpost: missing MODULE_LICENSE() in sound/soc/codecs/snd-soc-pcm512x-spi.o Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of small fixes: - make KGDB work again which got broken by the conversion of WARN() to #UD. The WARN fixup needs to run before the notifier callchain, otherwise KGDB tries to handle it and crashes. - disable KASAN in the ORC unwinder to prevent false positive KASAN warnings - prevent default mapping above 47bit when 5 level page tables are enabled - make the delay calibration optimization work correctly, which had the conditionals the wrong way around and was operating on data which was not yet updated. - remove the bogus X86_TRAP_BP trap init from the default IDT init table, which broke 32bit int3 handling by overwriting the correct int3 setup. - replace this_cpu* with boot_cpu_data access in the preemptible oprofile init code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/debug: Handle warnings before the notifier chain, to fix KGDB crash x86/mm: Fix ELF_ET_DYN_BASE for 5-level paging x86/idt: Remove X86_TRAP_BP initialization in idt_setup_traps() x86/oprofile/ppro: Do not use __this_cpu*() in preemptible context x86/unwind: Disable KASAN checking in the ORC unwinder x86/smpboot: Make optimization of delay calibration work correctly -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tool fixes from Thomas Gleixner: "A small set of fixes for perf tool: - synchronize the i915 drm header to avoid the 'out of date' warning - make sure that perf trace cleans up its temporary files on exit - unbreak the build with newer flex versions - add missing braces in the eBPF parsing rules" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tooling/headers: Sync the tools/include/uapi/drm/i915_drm.h UAPI header perf trace: Call machine__exit() at exit perf tools: Fix eBPF event specification parsing perf tools: Add "reject" option for parse-events.l
-
- 11 Nov, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Use after free in vlan, from Cong Wang. 2) Handle NAPI poll with a zero budget properly in mlx5 driver, from Saeed Mahameed. 3) If DMA mapping fails in mlx5 driver, NULL out page, from Inbar Karmy. 4) Handle overrun in RX FIFO of sun4i CAN driver, from Gerhard Bertelsmann. 5) Missing return in mdb and vlan prepare phase of DSA layer, from Vivien Didelot. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: vlan: fix a use-after-free in vlan_device_event() net: dsa: return after vlan prepare phase net: dsa: return after mdb prepare phase can: ifi: Fix transmitter delay calculation tcp: fix tcp_fastretrans_alert warning tcp: gso: avoid refcount_t warning from tcp_gso_segment() can: peak: Add support for new PCIe/M2 CAN FD interfaces can: sun4i: handle overrun in RX FIFO can: c_can: don't indicate triple sampling support for D_CAN net/mlx5e: Increase Striding RQ minimum size limit to 4 multi-packet WQEs net/mlx5e: Set page to null in case dma mapping fails net/mlx5e: Fix napi poll with zero budget net/mlx5: Cancel health poll before sending panic teardown command net/mlx5: Loop over temp list to release delay events rds: ib: Fix NULL pointer dereference in debug code -
David S. Miller authored
Merge tag 'linux-can-fixes-for-4.14-20171110' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-11-10 this is a pull request for net/master. The first patch by Richard Schütz for the c_can driver removes the false indication to support triple sampling for d_can. Gerhard Bertelsmann's patch for the sun4i driver improves the RX overrun handling. The patch by Stephane Grosjean for the peak_canfd driver adds the PCI ids for various new PCIe/M2 interfaces. Marek Vasut's patch for the ifi driver fix transmitter delay calculation. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2017-11-08 The following series includes some fixes for mlx5 core and etherent driver. Sorry for the late submission but as you can see i have some very critical fixes below that i would like them merged into this RC. Please pull and let me know if there is any problem. For -stable: ('net/mlx5e: Set page to null in case dma mapping fails') kernels >= 4.13 ('net/mlx5: FPGA, return -EINVAL if size is zero') kernels >= 4.13 ('net/mlx5: Cancel health poll before sending panic teardown command') kernels >= 4.13 V1->V2: - Fix Reviewed-by tag of the 2nd patch. - Drop the FPGA 0 size fix, it needs some more change log info. ==================== Signed-off-by: -
Cong Wang authored
After refcnt reaches zero, vlan_vid_del() could free dev->vlan_info via RCU: RCU_INIT_POINTER(dev->vlan_info, NULL); call_rcu(&vlan_info->rcu, vlan_info_rcu_free); However, the pointer 'grp' still points to that memory since it is set before vlan_vid_del(): vlan_info = rtnl_dereference(dev->vlan_info); if (!vlan_info) goto out; grp = &vlan_info->grp; Depends on when that RCU callback is scheduled, we could trigger a use-after-free in vlan_group_for_each_dev() right following this vlan_vid_del(). Fix it by moving vlan_vid_del() before setting grp. This is also symmetric to the vlan_vid_add() we call in vlan_device_event(). Reported-by:Fengguang Wu <fengguang.wu@intel.com> Fixes: efc73f4b ("net: Fix memory leak - vlan_info struct") Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Girish Moodalbail <girish.moodalbail@oracle.com> Tested-by:
-
Ingo Molnar authored
Last minute upstream update to one of the UAPI headers - sync it with tooling, to address this warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: -
Ingo Molnar authored
Merge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf tooling fixes from Arnaldo Carvalho de Melo. Signed-off-by:
-
Vivien Didelot authored
The current code does not return after successfully preparing the VLAN addition on every ports member of a it. Fix this. Fixes: 1ca4aa9c ("net: dsa: check VLAN capability of every switch") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vivien Didelot authored
The current code does not return after successfully preparing the MDB addition on every ports member of a multicast group. Fix this. Fixes: a1a6b7ea ("net: dsa: add cross-chip multicast support") Reported-by:
Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by:
-
- 10 Nov, 2017 8 commits
-
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph gix from Ilya Dryomov: "Memory allocation flags fix, marked for stable" * tag 'ceph-for-4.14-rc9' of git://github.com/ceph/ceph-client: rbd: use GFP_NOIO for parent stat and data requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input layer updates from Dmitry Torokhov: - a new ACPI ID for Elan touchpad found in yet another Ideapad model - Synaptics RMI4 will allow binding to controllers reporting SMB version 3 (note that we are not adding any new ACPI IDs to the Synaptics PS/2 drover so unless user explicitly enables intertouch support there is no user-visible change) - a fixup to TSC 2004/5 touchscreen driver to mark input devices as "direct" to help userspace identify the type of device they are dealing with * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics-rmi4 - RMI4 can also use SMBUS version 3 Input: tsc200x-core - set INPUT_PROP_DIRECT Input: elan_i2c - add ELAN060C to the ACPI table
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fix from Radim Krčmář: "Fix PPC HV host crash that can occur as a result of resizing the guest hashed page table" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PPC: Book3S HV: Fix exclusion between HPT resizing and other HPT updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mipsLinus Torvalds authored
Pull MIPS fixes from James Hogan: "A final few MIPS fixes for 4.14: - fix BMIPS NULL pointer dereference (4.7) - fix AR7 early GPIO init allocation failure (3.19) - fix dead serial output on certain AR7 platforms (2.6.35)" * tag 'mips_fixes_4.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: AR7: Ensure that serial ports are properly set up MIPS: AR7: Defer registration of GPIO MIPS: BMIPS: Fix missing cbr address
-
Maciej W. Rozycki authored
Following my recent transition from Imagination Technologies to the=20 reincarnated MIPS company add a .mailmap mapping for my work address, so that `scripts/get_maintainer.pl' gets it right for past commits. Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Signed-off-by:
-
Linus Torvalds authored
This reverts commit 941f5f0f. Sadly, it turns out that we really can't just do the cross-CPU IPI to all CPU's to get their proper frequencies, because it's much too expensive on systems with lots of cores. So we'll have to revert this for now, and revisit it using a smarter model (probably doing one system-wide IPI at open time, and doing all the frequency calculations in parallel). Reported-by:
WANG Chao <chao.wang@ucloud.cn> Reported-by:
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Last few patches to wrap up. Two i915 fixes that are on their way to stable, one vmware black screen bug, and one const patch that I was going to drop, but it was clearly a pretty safe one liner" * tag 'drm-fixes-for-v4.14-rc9' of git://people.freedesktop.org/~airlied/linux: drm/i915: Deconstruct struct sgt_dma initialiser drm/i915: Reject unknown syncobj flags drm/vmwgfx: Fix Ubuntu 17.10 Wayland black screen issue drm/vmwgfx: constify vmw_fence_ops
-
Marek Vasut authored
The CANFD transmitter delay calculation formula was updated in the latest software drop from IFI and improves the behavior of the IFI CANFD core during bitrate switching. Use the new formula to improve stability of the CANFD operation. Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Markus Marb <markus@marb.org> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
