- 24 Feb, 2020 2 commits
-
-
Greg Kroah-Hartman authored
We need the staging fixes in here, and it resolves a merge issue in the MAINTAINERS file. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Torvalds authored
-
- 23 Feb, 2020 28 commits
-
-
Kaaira Gupta authored
exfat_buf_sync() is not called anywhere, hence remove it from exfat_cache.c and exfat.h Signed-off-by:
Kaaira Gupta <kgupta@es.iitr.ac.in> Link: https://lore.kernel.org/r/20200223191623.GA20122@kaaira-HP-Pavilion-NotebookSigned-off-by:
-
Kaaira Gupta authored
sync_alloc_bitmap() is not called anywhere, hence remove it from exfat_core.c and exfat.h Signed-off-by:
-
Colin Ian King authored
Pointer p_key is being initialized with a value that is never read, it is assigned a new value later on. The initialization is redundant and can be removed. Reviewed-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20200223153954.420731-1-colin.king@canonical.comSigned-off-by:
-
Geert Uytterhoeven authored
Using overlay sugar syntax makes the DTS overlay files easier to read (and write). Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200221122133.32024-4-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
When running "scripts/dtc/dtc -@ -I dts -O dtb -o pi433-overlay.dtbo.1 drivers/staging/pi433/Documentation/devicetree/pi433-overlay.dts": drivers/staging/pi433/Documentation/devicetree/pi433-overlay.dts:13.12-15.6: Warning (unit_address_vs_reg): /fragment@0/__overlay__/spidev@0: node has a unit name, but no reg property drivers/staging/pi433/Documentation/devicetree/pi433-overlay.dts:17.12-19.6: Warning (unit_address_vs_reg): /fragment@0/__overlay__/spidev@1: node has a unit name, but no reg property Add the missing "reg" properties to fix this. drivers/staging/pi433/Documentation/devicetree/pi433-overlay.dts:14.5-15: Warning (reg_format): /fragment@0/__overlay__/spidev@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) drivers/staging/pi433/Documentation/devicetree/pi433-overlay.dts:19.5-15: Warning (reg_format): /fragment@0/__overlay__/spidev@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Add the missing "#{address,size}-cells" to fix this. Signed-off-by: -
Geert Uytterhoeven authored
checkpatch.pl says: WARNING: DT compatible string "bcm,bcm2708" appears un-documented -- check ./Documentation/devicetree/bindings/ The vendor prefix of Broadcom Corporation is "brcm", not "bcm". Signed-off-by: -
Colin Ian King authored
The zero'ing of counter variable k is redundant as it is never read after breaking out of the while loop. Remove it. Addresses-Coverity: ("Unused value") Signed-off-by: -
Colin Ian King authored
Variable cond is initialized to a value that is never read and it is re-assigned later. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Colin Ian King authored
Currently variable CrystalCap is being initialized with the value 0x20 that is never read so that is redundant and can be removed. Clean up the code by removing the need for variable CrystalCap since the calculation of the return value is relatively simple. Addresses-Coverity: ("Unused Value") Signed-off-by: -
Colin Ian King authored
The pointer init_status is being initialized with a value that is never read, it is being updated later on. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: -
Ajay Singh authored
Use YAML schemas for wilc1000 DT binding documentations. Currently, the files are present in '/drivers/staging/wilc1000/' but these will be moved to '/Documentation/devicetree/bindings/net/wireless/' later once the driver move out-of-staging. Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Link: https://lore.kernel.org/r/20200221123817.16643-1-ajay.kathat@microchip.comSigned-off-by:
-
Ajay Singh authored
Possible double unlocking of 'wilc->hif_cs' mutex was identified by smatch [1]. Removed the extra call to release_bus() in wilc_wlan_handle_txq() which was missed in earlier commit fdc2ac1a ("staging: wilc1000: support suspend/resume functionality"). [1]. https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/NOEVW7C3GV74EWXJO3XX6VT2NKVB2HMT/Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Kaaira Gupta authored
match the next line with open parentheses by giving appropriate tabs. Signed-off-by:
-
Kaaira Gupta authored
add a blank line after union declaration to fix checkpatch.pl warning Signed-off-by:
-
Kaaira Gupta authored
Fix checkpatch.pl warnings of required spaces around '+' sign in multiple lines in octeon-stubs.h by adding spaces. Also add space before parentheses in the same file to fix checkpatch.pl warning. Signed-off-by:
-
Kaaira Gupta authored
Simplify code in ql_mpi_core_to_log() by calling print_hex_dump() instead of existing functions so that the debug and dump are emitted at the same KERN_<LEVEL> Signed-off-by:
-
Kaaira Gupta authored
Fix checkpatch.pl warnings of adding braces around macro arguments to prevent precedence issues by adding braces in qlge_dbg.c Signed-off-by:
-
Gustavo A. R. Silva authored
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732 ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20200220132908.GA30501@embeddedorSigned-off-by:
-
Kaaira Gupta authored
fix all checkpatch.pl warnings of 'braces {} should be used on all arms of this statement' in the file qlge_ethtool.c by adding the braces. Acked-by: -
Kaaira Gupta authored
exfat_fat_sync() is not called anywhere, hence remove it from exfat_cache.c and exfat.h Acked-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by:
-
Tetsuhiro Kohada authored
Remove symlink feature completely. Becouse -Uses reserved areas(defined in the Microsoft exfat specification), causing future incompatibilities. -Not described in Microsoft exfat specifications or SD standards. -For REMOVABLE media, causes incompatibility with other implementations. -Not supported by other major exfat drivers. -Not implemented symlink feature in linux FAT/VFAT. Remove this feature completely because of serious media compatibility issues. (Can't enable even with CONFIG) If you have any questions about this patch, please let me know. Reviewed-by:
Takahiro Mori <Mori.Takahiro@ab.MitsubishiElectric.co.jp> Acked-by:
Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp> Link: https://lore.kernel.org/r/20200219055727.12867-1-Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jpSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "These are fixes that were found during testing with help of error injection, plus some other stable material. There's a fixup to patch added to rc1 causing locking in wrong context warnings, tests found one more deadlock scenario. The patches are tagged for stable, two of them now in the queue but we'd like all three released at the same time. I'm not happy about fixes to fixes in such a fast succession during rcs, but I hope we found all the fallouts of commit 28553fa9 ('Btrfs: fix race between shrinking truncate and fiemap')" * tag 'for-5.6-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix deadlock during fast fsync when logging prealloc extents beyond eof Btrfs: fix btrfs_wait_ordered_range() so that it waits for all ordered extents btrfs: fix bytes_may_use underflow in prealloc error condtition btrfs: handle logged extent failure properly btrfs: do not check delayed items are empty for single transaction cleanup btrfs: reset fs_root to NULL on error in open_ctree btrfs: destroy qgroup extent records on transaction abort
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "More miscellaneous ext4 bug fixes (all stable fodder)" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix mount failure with quota configured as module jbd2: fix ocfs2 corrupt when clearing block group bits ext4: fix race between writepages and enabling EXT4_EXTENTS_FL ext4: rename s_journal_flag_rwsem to s_writepages_rwsem ext4: fix potential race between s_flex_groups online resizing and access ext4: fix potential race between s_group_info online resizing and access ext4: fix potential race between online resizing and write operations ext4: add cond_resched() to __ext4_find_entry() ext4: fix a data race in EXT4_I(inode)->i_disksize
-
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "Sorry, I missed 5.6-rc1 merge window, but in this pull request the most are the fixes and the rests are between fixes and features. The only outside modification is the MAINTAINERS file update with our mailing list. - cache flush implementation fixes - ftrace modify panic fix - CONFIG_SMP boot problem fix - fix pt_regs saving for atomic.S - fix fixaddr_init without highmem. - fix stack protector support - fix fake Tightly-Coupled Memory code compile and use - fix some typos and coding convention" * tag 'csky-for-linus-5.6-rc3' of git://github.com/c-sky/csky-linux: (23 commits) csky: Replace <linux/clk-provider.h> by <linux/of_clk.h> csky: Implement copy_thread_tls csky: Add PCI support csky: Minimize defconfig to support buildroot config.fragment csky: Add setup_initrd check code csky: Cleanup old Kconfig options arch/csky: fix some Kconfig typos csky: Fixup compile warning for three unimplemented syscalls csky: Remove unused cache implementation csky: Fixup ftrace modify panic csky: Add flush_icache_mm to defer flush icache all csky: Optimize abiv2 copy_to_user_page with VM_EXEC csky: Enable defer flush_dcache_page for abiv2 cpus (807/810/860) csky: Remove unnecessary flush_icache_* implementation csky: Support icache flush without specific instructions csky/Kconfig: Add Kconfig.platforms to support some drivers csky/smp: Fixup boot failed when CONFIG_SMP csky: Set regs->usp to kernel sp, when the exception is from kernel csky/mm: Fixup export invalid_pte_table symbol csky: Separate fixaddr_init from highmem ...
-
Geert Uytterhoeven authored
The C-Sky platform code is not a clock provider, and just needs to call of_clk_init(). Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>. Signed-off-by:
Guo Ren <guoren@linux.alibaba.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RAS fixes from Thomas Gleixner: "Two fixes for the AMD MCE driver: - Populate the per CPU MCA bank descriptor pointer only after it has been completely set up to prevent a use-after-free in case that one of the subsequent initialization step fails - Implement a proper release function for the sysfs entries of MCA threshold controls instead of freeing the memory right in the CPU teardown code, which leads to another use-after-free when the associated sysfs file is opened and accessed" * tag 'ras-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Fix kobject lifetime x86/mce/amd: Publish the bank pointer only after setup has succeeded -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "Two fixes for the irq core code which are follow ups to the recent MSI fixes: - The WARN_ON which was put into the MSI setaffinity callback for paranoia reasons actually triggered via a callchain which escaped when all the possible ways to reach that code were analyzed. The proc/irq/$N/*affinity interfaces have a quirk which came in when ALPHA moved to the generic interface: In case that the written affinity mask does not contain any online CPU it calls into ALPHAs magic auto affinity setting code. A few years later this mechanism was also made available to x86 for no good reasons and in a way which circumvents all sanity checks for interrupts which cannot have their affinity set from process context on X86 due to the way the X86 interrupt delivery works. It would be possible to make this work properly, but there is no point in doing so. If the interrupt is not yet started then the affinity setting has no effect and if it is started already then it is already assigned to an online CPU so there is no point to randomly move it to some other CPU. Just return EINVAL as the code has done before that change forever. - The new MSI quirk bit in the irq domain flags turned out to be already occupied, which escaped the author and the reviewers because the already in use bits were 0,6,2,3,4,5 listed in that order. That bit 6 was simply overlooked because the ordering was straight forward linear otherwise. So the new bit ended up being a duplicate. Fix it up by switching the oddball 6 to the obvious 1" * tag 'irq-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/irqdomain: Make sure all irq domain flags are distinct genirq/proc: Reject invalid affinity masks (again) -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "Two fixes for x86: - Remove the __force_oder definiton from the kaslr boot code as it is already defined in the page table code which makes GCC 10 builds fail because it changed the default to -fno-common. - Address the AMD erratum 1054 concerning the IRPERF capability and enable the Instructions Retired fixed counter on machines which are not affected by the erratum" * tag 'x86-urgent-2020-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable the fixed Instructions Retired counter IRPERF x86/boot/compressed: Don't declare __force_order in kaslr_64.c
-
- 22 Feb, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: "A single patch fixing typos in the documentation file" * tag 'zonefs-5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix documentation typos etc.
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Here's a small collection of fixes that were queued up: - Remove unnecessary NULL check (Dan) - Missing io_req_cancelled() call in fallocate (Pavel) - Put the cleanup check for aux data in the right spot (Pavel) - Two fixes for SQPOLL (Stefano, Xiaoguang)" * tag 'io_uring-5.6-2020-02-22' of git://git.kernel.dk/linux-block: io_uring: fix __io_iopoll_check deadlock in io_sq_thread io_uring: prevent sq_thread from spinning when it should stop io_uring: fix use-after-free by io_cleanup_req() io_uring: remove unnecessary NULL checks io_uring: add missing io_req_cancelled()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just a set of NVMe fixes via Keith" * tag 'block-5.6-2020-02-22' of git://git.kernel.dk/linux-block: nvme-multipath: Fix memory leak with ana_log_buf nvme: Fix uninitialized-variable warning nvme-pci: Use single IRQ vector for old Apple models nvme/pci: Add sleep quirk for Samsung and Toshiba drives
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four non-core fixes. Two are reverts of target fixes which turned out to have unwanted side effects, one is a revert of an RDMA fix with the same problem and the final one fixes an incorrect warning about memory allocation failures in megaraid_sas (the driver actually reduces the allocation size until it succeeds)" Signed-off-by:
James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Revert "target: iscsi: Wait for all commands to finish before freeing a session" scsi: Revert "RDMA/isert: Fix a recently introduced regression related to logout" scsi: megaraid_sas: silence a warning scsi: Revert "target/core: Inline transport_lun_remove_cmd()"
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix crash in w83627ehf driver seen with W83627DHG-P - Fix lockdep splat in acpi_power_meter driver - Fix xdpe12284 documentation Sphinx warnings * tag 'hwmon-for-v5.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Fix crash seen with W83627DHG-P hwmon: (acpi_power_meter) Fix lockdep splat Documentation/hwmon: fix xdpe12284 Sphinx warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes deom Rob Herring: "A handful of fixes in DT bindings for MDIO bus, Allwinner CSI, OMAP HSMMC, and Tegra124 EMC" * tag 'devicetree-fixes-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: csi: Fix clocks description dt-bindings: media: csi: Add interconnects properties dt-bindings: net: mdio: remove compatible string from example dt-bindings: memory-controller: Update example for Tegra124 EMC dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Remove ieee_emulation_warnings sysctl which is a dead code. - Avoid triggering rebuild of the kernel during make install. - Enable protected virtualization guest support in default configs. - Fix cio_ignore seq_file .next function to increase position index. And use kobj_to_dev instead of container_of in cio code. - Fix storage block address lists to contain absolute addresses in qdio code. - Few clang warnings and spelling fixes. * tag 's390-5.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: fill SBALEs with absolute addresses s390/qdio: fill SL with absolute addresses s390: remove obsolete ieee_emulation_warnings s390: make 'install' not depend on vmlinux s390/kaslr: Fix casts in get_random s390/mm: Explicitly compare PAGE_DEFAULT_KEY against zero in storage_key_init_range s390/pkey/zcrypt: spelling s/crytp/crypt/ s390/cio: use kobj_to_dev() API s390/defconfig: enable CONFIG_PROTECTED_VIRTUALIZATION_GUEST s390/cio: cio_ignore_proc_seq_next should increase position index
-
Xiaoguang Wang authored
Since commit a3a0e43f ("io_uring: don't enter poll loop if we have CQEs pending"), if we already events pending, we won't enter poll loop. In case SETUP_IOPOLL and SETUP_SQPOLL are both enabled, if app has been terminated and don't reap pending events which are already in cq ring, and there are some reqs in poll_list, io_sq_thread will enter __io_iopoll_check(), and find pending events, then return, this loop will never have a chance to exit. I have seen this issue in fio stress tests, to fix this issue, let io_sq_thread call io_iopoll_getevents() with argument 'min' being zero, and remove __io_iopoll_check(). Fixes: a3a0e43f ("io_uring: don't enter poll loop if we have CQEs pending") Signed-off-by:
Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jan Kara authored
When CONFIG_QFMT_V2 is configured as a module, the test in ext4_feature_set_ok() fails and so mount of filesystems with quota or project features fails. Fix the test to use IS_ENABLED macro which works properly even for modules. Link: https://lore.kernel.org/r/20200221100835.9332-1-jack@suse.cz Fixes: d65d87a0 ("ext4: improve explanation of a mount failure caused by a misconfigured kernel") Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
-
wangyan authored
I found a NULL pointer dereference in ocfs2_block_group_clear_bits(). The running environment: kernel version: 4.19 A cluster with two nodes, 5 luns mounted on two nodes, and do some file operations like dd/fallocate/truncate/rm on every lun with storage network disconnection. The fallocate operation on dm-23-45 caused an null pointer dereference. The information of NULL pointer dereference as follows: [577992.878282] JBD2: Error -5 detected when updating journal superblock for dm-23-45. [577992.878290] Aborting journal on device dm-23-45. ... [577992.890778] JBD2: Error -5 detected when updating journal superblock for dm-24-46. [577992.890908] __journal_remove_journal_head: freeing b_committed_data [577992.890916] (fallocate,88392,52):ocfs2_extend_trans:474 ERROR: status = -30 [577992.890918] __journal_remove_journal_head: freeing b_committed_data [577992.890920] (fallocate,88392,52):ocfs2_rotate_tree_right:2500 ERROR: status = -30 [577992.890922] __journal_remove_journal_head: freeing b_committed_data [577992.890924] (fallocate,88392,52):ocfs2_do_insert_extent:4382 ERROR: status = -30 [577992.890928] (fallocate,88392,52):ocfs2_insert_extent:4842 ERROR: status = -30 [577992.890928] __journal_remove_journal_head: freeing b_committed_data [577992.890930] (fallocate,88392,52):ocfs2_add_clusters_in_btree:4947 ERROR: status = -30 [577992.890933] __journal_remove_journal_head: freeing b_committed_data [577992.890939] __journal_remove_journal_head: freeing b_committed_data [577992.890949] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [577992.890950] Mem abort info: [577992.890951] ESR = 0x96000004 [577992.890952] Exception class = DABT (current EL), IL = 32 bits [577992.890952] SET = 0, FnV = 0 [577992.890953] EA = 0, S1PTW = 0 [577992.890954] Data abort info: [577992.890955] ISV = 0, ISS = 0x00000004 [577992.890956] CM = 0, WnR = 0 [577992.890958] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000f8da07a9 [577992.890960] [0000000000000020] pgd=0000000000000000 [577992.890964] Internal error: Oops: 96000004 [#1] SMP [577992.890965] Process fallocate (pid: 88392, stack limit = 0x00000000013db2fd) [577992.890968] CPU: 52 PID: 88392 Comm: fallocate Kdump: loaded Tainted: G W OE 4.19.36 #1 [577992.890969] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 [577992.890971] pstate: 60400009 (nZCv daif +PAN -UAO) [577992.891054] pc : _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891082] lr : _ocfs2_free_suballoc_bits+0x618/0x968 [ocfs2] [577992.891084] sp : ffff0000c8e2b810 [577992.891085] x29: ffff0000c8e2b820 x28: 0000000000000000 [577992.891087] x27: 00000000000006f3 x26: ffffa07957b02e70 [577992.891089] x25: ffff807c59d50000 x24: 00000000000006f2 [577992.891091] x23: 0000000000000001 x22: ffff807bd39abc30 [577992.891093] x21: ffff0000811d9000 x20: ffffa07535d6a000 [577992.891097] x19: ffff000001681638 x18: ffffffffffffffff [577992.891098] x17: 0000000000000000 x16: ffff000080a03df0 [577992.891100] x15: ffff0000811d9708 x14: 203d207375746174 [577992.891101] x13: 73203a524f525245 x12: 20373439343a6565 [577992.891103] x11: 0000000000000038 x10: 0101010101010101 [577992.891106] x9 : ffffa07c68a85d70 x8 : 7f7f7f7f7f7f7f7f [577992.891109] x7 : 0000000000000000 x6 : 0000000000000080 [577992.891110] x5 : 0000000000000000 x4 : 0000000000000002 [577992.891112] x3 : ffff000001713390 x2 : 2ff90f88b1c22f00 [577992.891114] x1 : ffff807bd39abc30 x0 : 0000000000000000 [577992.891116] Call trace: [577992.891139] _ocfs2_free_suballoc_bits+0x63c/0x968 [ocfs2] [577992.891162] _ocfs2_free_clusters+0x100/0x290 [ocfs2] [577992.891185] ocfs2_free_clusters+0x50/0x68 [ocfs2] [577992.891206] ocfs2_add_clusters_in_btree+0x198/0x5e0 [ocfs2] [577992.891227] ocfs2_add_inode_data+0x94/0xc8 [ocfs2] [577992.891248] ocfs2_extend_allocation+0x1bc/0x7a8 [ocfs2] [577992.891269] ocfs2_allocate_extents+0x14c/0x338 [ocfs2] [577992.891290] __ocfs2_change_file_space+0x3f8/0x610 [ocfs2] [577992.891309] ocfs2_fallocate+0xe4/0x128 [ocfs2] [577992.891316] vfs_fallocate+0x11c/0x250 [577992.891317] ksys_fallocate+0x54/0x88 [577992.891319] __arm64_sys_fallocate+0x28/0x38 [577992.891323] el0_svc_common+0x78/0x130 [577992.891325] el0_svc_handler+0x38/0x78 [577992.891327] el0_svc+0x8/0xc My analysis process as follows: ocfs2_fallocate __ocfs2_change_file_space ocfs2_allocate_extents ocfs2_extend_allocation ocfs2_add_inode_data ocfs2_add_clusters_in_btree ocfs2_insert_extent ocfs2_do_insert_extent ocfs2_rotate_tree_right ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2_journal_restart jbd2__journal_restart /* handle->h_transaction is NULL, * is_handle_aborted(handle) is true */ handle->h_transaction = NULL; start_this_handle return -EROFS; ocfs2_free_clusters _ocfs2_free_clusters _ocfs2_free_suballoc_bits ocfs2_block_group_clear_bits ocfs2_journal_access_gd __ocfs2_journal_access jbd2_journal_get_undo_access /* I think jbd2_write_access_granted() will * return true, because do_get_write_access() * will return -EROFS. */ if (jbd2_write_access_granted(...)) return 0; do_get_write_access /* handle->h_transaction is NULL, it will * return -EROFS here, so do_get_write_access() * was not called. */ if (is_handle_aborted(handle)) return -EROFS; /* bh2jh(group_bh) is NULL, caused NULL pointer dereference */ undo_bg = (struct ocfs2_group_desc *) bh2jh(group_bh)->b_committed_data; If handle->h_transaction == NULL, then jbd2_write_access_granted() does not really guarantee that journal_head will stay around, not even speaking of its b_committed_data. The bh2jh(group_bh) can be removed after ocfs2_journal_access_gd() and before call "bh2jh(group_bh)->b_committed_data". So, we should move is_handle_aborted() check from do_get_write_access() into jbd2_journal_get_undo_access() and jbd2_journal_get_write_access() before the call to jbd2_write_access_granted(). Link: https://lore.kernel.org/r/f72a623f-b3f1-381a-d91d-d22a1c83a336@huawei.comSigned-off-by:Yan Wang <wangyan122@huawei.com> Signed-off-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
-
