- 02 Jun, 2020 36 commits
-
-
Michael Ellerman authored
Since the previous commit that saves the value of FSCR configured at boot into init_task.thread.fscr, the static initialisation in INIT_THREAD now no longer has any effect. So remove it. For non DT CPU features, the end result is the same, because __init_FSCR() is called on all CPUs that have an FSCR (Power8, Power9), and it sets FSCR_TAR & FSCR_EBB. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-4-mpe@ellerman.id.au
-
Michael Ellerman authored
At boot the FSCR is initialised via one of two paths. On most systems it's set to a hard coded value in __init_FSCR(). On newer skiboot systems we use the device tree CPU features binding, where firmware can tell Linux what bits to set in FSCR (and HFSCR). In both cases the value that's configured at boot is not propagated into the init_task.thread.fscr value prior to the initial fork of init (pid 1), which means the value is not used by any processes other than swapper (the idle task). For the __init_FSCR() case this is OK, because the value in init_task.thread.fscr is initialised to something sensible. However it does mean that the value set in __init_FSCR() is not used other than for swapper, which is odd and confusing. The bigger problem is for the device tree CPU features case it prevents firmware from setting (or clearing) FSCR bits for use by user space. This means all existing kernels can not have features enabled/disabled by firmware if those features require setting/clearing FSCR bits. We can handle both cases by saving the FSCR value into init_task.thread.fscr after we have initialised it at boot. This fixes the bug for device tree CPU features, and will allow us to simplify the initialisation for the __init_FSCR() case in a future patch. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Michael Ellerman authored
The device tree CPU features binding includes FSCR bit numbers which Linux is instructed to set by firmware. Whether that's a good idea or not, in the case of the DSCR the Linux implementation has a hard requirement that the FSCR_DSCR bit not be set by default. We use it to track when a process reads/writes to DSCR, so it must be clear to begin with. So if firmware tells us to set FSCR_DSCR we must ignore it. Currently this does not cause a bug in our DSCR handling because the value of FSCR that the device tree CPU features code establishes is only used by swapper. All other tasks use the value hard coded in init_task.thread.fscr. However we'd like to fix that in a future commit, at which point this will become necessary. Fixes: 5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by:
-
Michael Ellerman authored
__init_FSCR() was added originally in commit 2468dcf6 ("powerpc: Add support for context switching the TAR register") (Feb 2013), and only set FSCR_TAR. At that point FSCR (Facility Status and Control Register) was not context switched, so the setting was permanent after boot. Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit 54c9b225 ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again that was permanent after boot. Then commit 2517617e ("powerpc: Fix context switch DSCR on POWER8") (Aug 2013) added a limited context switch of FSCR, just the FSCR_DSCR bit was context switched based on thread.dscr_inherit. That commit said "This clears the H/FSCR DSCR bit initially", but it didn't, it left the initialisation of FSCR_DSCR in __init_FSCR(). However the initial context switch from init_task to pid 1 would clear FSCR_DSCR because thread.dscr_inherit was 0. That commit also introduced the requirement that FSCR_DSCR be clear for user processes, so that we can take the facility unavailable interrupt in order to manage dscr_inherit. Then in commit 152d523e ("powerpc: Create context switch helpers save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to thread_struct. However it still wasn't fully context switched, we just took the existing value and set FSCR_DSCR if the new thread had dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR | FSCR_TAR, but that value was not propagated into the thread_struct, so the initial context switch set FSCR_DSCR back to 0. Finally commit b57bd2de ("powerpc: Improve FSCR init and context switching") (Jun 2016) added a full context switch of the FSCR, and added an initialisation of init_task.thread.fscr to FSCR_TAR | FSCR_EBB, but omitted FSCR_DSCR. The end result is that swapper runs with FSCR_DSCR set because of the initialisation in __init_FSCR(), but no other processes do, they use the value from init_task.thread.fscr. Having FSCR_DSCR set for swapper allows it to access SPR 3 from userspace, but swapper never runs userspace, so it has no useful effect. It's also confusing to have the value initialised in two places to two different values. So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the point where there's a single value of FSCR, even if it's still set in two places. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
-
Christophe Leroy authored
'thread' doesn't exist in kuap_check() macro. Use 'current' instead. Fixes: a68c31fc ("powerpc/32s: Implement Kernel Userspace Access Protection") Cc: stable@vger.kernel.org Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
Naveen N. Rao authored
Since commit c55d7b5e ("powerpc: Remove STRICT_KERNEL_RWX incompatibility with RELOCATABLE"), powerpc kernels with -mprofile-kernel can crash in certain scenarios with a trace like below: BUG: Unable to handle kernel instruction fetch (NULL pointer?) Faulting instruction address: 0x00000000 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=256 DEBUG_PAGEALLOC NUMA PowerNV <snip> NIP [0000000000000000] 0x0 LR [c0080000102c0048] ext4_iomap_end+0x8/0x30 [ext4] Call Trace: iomap_apply+0x20c/0x920 (unreliable) iomap_bmap+0xfc/0x160 ext4_bmap+0xa4/0x180 [ext4] bmap+0x4c/0x80 jbd2_journal_init_inode+0x44/0x1a0 [jbd2] ext4_load_journal+0x440/0x860 [ext4] ext4_fill_super+0x342c/0x3ab0 [ext4] mount_bdev+0x25c/0x290 ext4_mount+0x28/0x50 [ext4] legacy_get_tree+0x4c/0xb0 vfs_get_tree+0x4c/0x130 do_mount+0xa18/0xc50 sys_mount+0x158/0x180 system_call+0x5c/0x68 The NIP points to NULL, or a random location (data even), while the LR always points to the LEP of a function (with an offset of 8), indicating that something went wrong with ftrace. However, ftrace is not necessarily active when such crashes occur. The kernel OOPS sometimes follows a warning from ftrace indicating that some module functions could not be patched with a nop. Other times, if a module is loaded early during boot, instruction patching can fail due to a separate bug, but the error is not reported due to missing error reporting. In all the above cases when instruction patching fails, ftrace will be disabled but certain kernel module functions will be left with default calls to _mcount(). This is not a problem with ELFv1. However, with -mprofile-kernel, the default stub is problematic since it depends on a valid module TOC in r2. If the kernel (or a different module) calls into a function that does not use the TOC, the function won't have a prologue to setup the module TOC. When that function calls into _mcount(), we will end up in the relocation stub that will use the previous TOC, and end up trying to jump into a random location. From the above trace: iomap_apply+0x20c/0x920 [kernel TOC] | V ext4_iomap_end+0x8/0x30 [no GEP == kernel TOC] | V _mcount() stub [uses kernel TOC -> random entry] To address this, let's change over to using the special stub that is used for ftrace_[regs_]caller() for _mcount(). This ensures that we are not dependent on a valid module TOC in r2 for default _mcount() handling. Reported-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
-
Naveen N. Rao authored
For -mprofile-kernel, we need special handling when generating stubs for ftrace calls such as _mcount(). To faciliate this, we check if a R_PPC64_REL24 relocation is for a symbol named "_mcount()" along with also checking the instruction sequence. The latter is not really required since "_mcount()" is an exported symbol and kernel modules cannot use it. As such, drop the additional checking and simplify the code. This helps unify stub creation for ftrace stubs with -mprofile-kernel and aids in code reuse. Also rename is_mprofile_mcount_callsite() to is_mprofile_ftrace_call() to reflect the checking being done. Signed-off-by:
-
Naveen N. Rao authored
module_trampoline_target() is only used by ftrace. Move the prototype within the appropriate #ifdef in the header. Also, move the function body to the end of module_64.c so as to consolidate all ftrace code in one place. No functional changes. Signed-off-by:
-
Christophe Leroy authored
Mapping of early shadow area is implemented by using a single static page table having all entries pointing to the same early shadow page. The shadow area must therefore occupy full PGD entries. The shadow area has a size of 128MB starting at 0xf8000000. With 4k pages, a PGD entry is 4MB With 16k pages, a PGD entry is 64MB With 64k pages, a PGD entry is 1GB which is too big. Until we rework the early shadow mapping, disable KASAN when the page size is too big. Fixes: 2edb16ef ("powerpc/32: Add KASAN support") Cc: stable@vger.kernel.org # v5.2+ Reported-by:
-
Christophe Leroy authored
On book3s/32, KUEP is an heavy process as it requires to set/unset the NX bit in each of the 12 user segments everytime the kernel is entered/exited from/to user space. Don't select KUEP by default on book3s/32. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
On book3s/32, KUAP is an heavy process as it requires to determine which segments are impacted and unlock/lock each of them. And since the implementation of user_access_begin/end, it is even worth for the time being because unlike __get_user(), user_access_begin doesn't make difference between read and write and unlocks access also for read allthought that's unneeded on book3s/32. As shown by the size of a kernel built with KUAP and one without, the overhead is 64k bytes of code. As a comparison a similar build on an 8xx has an overhead of only 8k bytes of code. text data bss dec hex filename 7230416 1425868 837376 9493660 90dc9c vmlinux.kuap6xx 7165012 1425548 837376 9427936 8fdbe0 vmlinux.nokuap6xx 6519796 1960028 477464 8957288 88ad68 vmlinux.kuap8xx 6511664 1959864 477464 8948992 888d00 vmlinux.nokuap8xx Until a more optimised KUAP is implemented on book3s/32, don't select it by default. Signed-off-by:
-
Christophe Leroy authored
To enable/disable kernel access to user space, the 8xx has to modify the properties of access group 1. This is done by writing predefined values into SPRN_Mx_AP registers. As of today, a __put_user() gives: 00000d64 <my_test>: d64: 3d 20 4f ff lis r9,20479 d68: 61 29 ff ff ori r9,r9,65535 d6c: 7d 3a c3 a6 mtspr 794,r9 d70: 39 20 00 00 li r9,0 d74: 90 83 00 00 stw r4,0(r3) d78: 3d 20 6f ff lis r9,28671 d7c: 61 29 ff ff ori r9,r9,65535 d80: 7d 3a c3 a6 mtspr 794,r9 d84: 4e 80 00 20 blr Because only groups 0 and 1 are used, the definition of groups 2 to 15 doesn't matter. By setting unused bits to 0 instead on 1, one instruction is removed for each lock and unlock action: 00000d5c <my_test>: d5c: 3d 20 40 00 lis r9,16384 d60: 7d 3a c3 a6 mtspr 794,r9 d64: 39 20 00 00 li r9,0 d68: 90 83 00 00 stw r4,0(r3) d6c: 3d 20 60 00 lis r9,24576 d70: 7d 3a c3 a6 mtspr 794,r9 d74: 4e 80 00 20 blr Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. The very last part of exception exits cannot support a trap. Blacklist them from kprobe. While we are at it, remove exc_exit_start symbol which is not used to avoid having to blacklist it. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. The very last part of syscall cannot support a trap. Add a symbol syscall_exit_finish to identify that part and blacklist it from kprobe. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode. As exception entry points are running with MMU disabled, blacklist them. The handling of TLF_NAPPING and TLF_SLEEPING is moved before the CONFIG_TRACE_IRQFLAGS which contains 'reenable_mmu' because from there kprobe will be possible as the kernel will run with MMU enabled. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
machine_check_in_rtas() is just a trap. Do the trap directly in the machine check exception handler. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
In hash_low.S, a lot of named local symbols are used instead of numbers to ease code readability. However, they don't need to be visible. In order to ease blacklisting of functions running with MMU disabled for kprobe, rename the symbols to .Lsymbols in order to hide them as if they were numbered labels. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
kprobe does not handle events happening in real mode, all functions running with MMU disabled have to be blacklisted. Signed-off-by:
-
Christophe Leroy authored
In order to avoid Oopses, use probe_address() to read the instruction at the address where the trap happened. Signed-off-by:
-
Michael Neuling authored
This gives us OF_PMEM which is useful in mambo. This adds 153K to the text of ppc64le_defconfig which 0.8% of the total text. LIBNVDIMM text data bss dec hex Without 18574833 5518150 1539240 25632223 1871ddf With 18727834 5546206 1539368 25813408 189e1a0 Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
-
Leonardo Bras authored
Implement rtas_call_reentrant() for reentrant rtas-calls: "ibm,int-on", "ibm,int-off",ibm,get-xive" and "ibm,set-xive". On LoPAPR Version 1.1 (March 24, 2016), from 7.3.10.1 to 7.3.10.4, items 2 and 3 say: 2 - For the PowerPC External Interrupt option: The * call must be reentrant to the number of processors on the platform. 3 - For the PowerPC External Interrupt option: The * argument call buffer for each simultaneous call must be physically unique. So, these rtas-calls can be called in a lockless way, if using a different buffer for each cpu doing such rtas call. For this, it was suggested to add the buffer (struct rtas_args) in the PACA struct, so each cpu can have it's own buffer. The PACA struct received a pointer to rtas buffer, which is allocated in the memory range available to rtas 32-bit. Reentrant rtas calls are useful to avoid deadlocks in crashing, where rtas-calls are needed, but some other thread crashed holding the rtas.lock. This is a backtrace of a deadlock from a kdump testing environment: #0 arch_spin_lock #1 lock_rtas () #2 rtas_call (token=8204, nargs=1, nret=1, outputs=0x0) #3 ics_rtas_mask_real_irq (hw_irq=4100) #4 machine_kexec_mask_interrupts #5 default_machine_crash_shutdown #6 machine_crash_shutdown #7 __crash_kexec #8 crash_kexec #9 oops_end Signed-off-by:
Leonardo Bras <leobras.c@gmail.com> [mpe: Move under #ifdef PSERIES to avoid build breakage] Signed-off-by:
-
Leonardo Bras authored
In order to get any rtas* struct into other headers, including rtas.h may cause a lot of errors, regarding include dependency needed for inline functions. Create rtas-types.h and move there all type/struct definitions from rtas.h, then include rtas-types.h into rtas.h. Also, as suggested by checkpath.pl, replace uint8_t for u8. Signed-off-by:
-
Leonardo Bras authored
Currently, if printk lock (logbuf_lock) is held by other thread during crash, there is a chance of deadlocking the crash on next printk, and blocking a possibly desired kdump. At the start of default_machine_crash_shutdown, make printk enter NMI context, as it will use per-cpu buffers to store the message, and avoid locking logbuf_lock. Suggested-by:
-
Leonardo Bras authored
While providing guests, it's desirable to resize it's memory on demand. By now, it's possible to do so by creating a guest with a small base memory, hot-plugging all the rest, and using 'movable_node' kernel command-line parameter, which puts all hot-plugged memory in ZONE_MOVABLE, allowing it to be removed whenever needed. But there is an issue regarding guest reboot: If memory is hot-plugged, and then the guest is rebooted, all hot-plugged memory goes to ZONE_NORMAL, which offers no guaranteed hot-removal. It usually prevents this memory to be hot-removed from the guest. It's possible to use device-tree information to fix that behavior, as it stores flags for LMB ranges on ibm,dynamic-memory-vN. It involves marking each memblock with the correct flags as hotpluggable memory, which mm/memblock.c puts in ZONE_MOVABLE during boot if 'movable_node' is passed. For carrying such information, the new flag DRCONF_MEM_HOTREMOVABLE was proposed and accepted into Power Architecture documentation. This flag should be: - true (b=1) if the hypervisor may want to hot-remove it later, and - false (b=0) if it does not care. During boot, guest kernel reads the device-tree, early_init_drmem_lmb() is called for every added LMBs. Here, checking for this new flag and marking memblocks as hotplugable memory is enough to get the desirable behavior. This should cause no change if 'movable_node' parameter is not passed in kernel command-line. Signed-off-by:
Leonardo Bras <leonardo@linux.ibm.com> Reviewed-by:
Bharata B Rao <bharata@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Show the address of the tasks regs in the process listing in xmon. The regs should always be on the stack page that we also print the address of, but it's still helpful not to have to find them by hand. Signed-off-by:
-
Michael Ellerman authored
This adds the CPU or thread number to printk messages. This helps a lot when deciphering concurrent oopses that have been interleaved. Example output, of PID1 (T1) triggering a warning: [ 1.581678][ T1] WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:539 pkcs1pad_verify+0x38/0x140 [ 1.581681][ T1] Modules linked in: [ 1.581693][ T1] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty #1515 [ 1.581700][ T1] NIP: c000000000207d64 LR: c000000000207d3c CTR: c000000000207d2c [ 1.581708][ T1] REGS: c0000000fd2e7560 TRAP: 0700 Not tainted (5.5.0-rc5-gcc-8.2.0-00121-gf84c2e595927-dirty) [ 1.581712][ T1] MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44000222 XER: 00040000 Signed-off-by:
-
Michael Neuling authored
Currently when we boot on a big core system, we get this print: [ 0.040500] Using small cores at SMT level This is misleading as we've actually detected big cores. This patch clears up the print to say we've detect big cores but are using small cores for scheduling. Signed-off-by:
-
Hari Bathini authored
If the memory chunk found for reserving memory overshoots the memory limit imposed, do not proceed with reserving memory. Default behavior was this until commit 140777a3 ("powerpc/fadump: consider reserved ranges while reserving memory") changed it unwittingly. Fixes: 140777a3 ("powerpc/fadump: consider reserved ranges while reserving memory") Cc: stable@vger.kernel.org Reported-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Pingfan Liu authored
'mem=" option is an easy way to put high pressure on memory during some test. Hence after applying the memory limit, instead of total mem, the actual usable memory should be considered when reserving mem for crashkernel. Otherwise the boot up may experience OOM issue. E.g. it would reserve 4G prior to the change and 512M afterward, if passing crashkernel="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G", and mem=5G on a 256G machine. This issue is powerpc specific because it puts higher priority on fadump and kdump reservation than on "mem=". Referring the following code: if (fadump_reserve_mem() == 0) reserve_crashkernel(); ... /* Ensure that total memory size is page-aligned. */ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE); memblock_enforce_memory_limit(limit); While on other arches, the effect of "mem=" takes a higher priority and pass through memblock_phys_mem_size() before calling reserve_crashkernel(). Signed-off-by:Pingfan Liu <kernelfans@gmail.com> Reviewed-by:
-
Ravi Bangoria authored
kbuild test robot reported some build warnings in the hw_breakpoint code when compiled with clang[1]. Some of them were introduced by the recent powerpc change to add arch_reserve_bp_slot() and arch_release_bp_slot(). Fix them all. kernel/events/hw_breakpoint.c:71:12: warning: no previous prototype for function 'hw_breakpoint_weight' kernel/events/hw_breakpoint.c:216:12: warning: no previous prototype for function 'arch_reserve_bp_slot' kernel/events/hw_breakpoint.c:221:13: warning: no previous prototype for function 'arch_release_bp_slot' kernel/events/hw_breakpoint.c:228:13: warning: no previous prototype for function 'arch_unregister_hw_breakpoint' [1]: https://lore.kernel.org/linuxppc-dev/202005192233.oi9CjRtA%25lkp@intel.com/ Fixes: 29da4f91 ("powerpc/watchpoint: Don't allow concurrent perf and ptrace events") Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> [mpe: Drop extern, flesh out change log, add Fixes tag] Signed-off-by:
-
- 28 May, 2020 4 commits
-
-
Ram Pai authored
XIVE interrupt controller uses an Event Queue (EQ) to enqueue event notifications when an exception occurs. The EQ is a single memory page provided by the O/S defining a circular buffer, one per server and priority couple. On baremetal, the EQ page is configured with an OPAL call. On pseries, an extra hop is necessary and the guest OS uses the hcall H_INT_SET_QUEUE_CONFIG to configure the XIVE interrupt controller. The XIVE controller being Hypervisor privileged, it will not be allowed to enqueue event notifications for a Secure VM unless the EQ pages are shared by the Secure VM. Hypervisor/Ultravisor still requires support for the TIMA and ESB page fault handlers. Until this is complete, QEMU can use the emulated XIVE device for Secure VMs, option "kernel_irqchip=off" on the QEMU pseries machine. Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Reviewed-by:
Cedric Le Goater <clg@kaod.org> Reviewed-by:
Greg Kurz <groug@kaod.org> Signed-off-by:
-
Kajol Jain authored
Function 'read_sys_info_pseries()' is added to get system parameter values like number of sockets and chips per socket. and it gets these details via rtas_call with token "PROCESSOR_MODULE_INFO". Incase lpar migrate from one system to another, system parameter details like chips per sockets or number of sockets might change. So, it needs to be re-initialized otherwise, these values corresponds to previous system values. This patch adds a call to 'read_sys_info_pseries()' from 'post-mobility_fixup()' to re-init the physsockets and physchips values Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Kajol Jain authored
Add documentation for the following sysfs files: /sys/devices/hv_24x7/interface/chipspersocket, /sys/devices/hv_24x7/interface/sockets, /sys/devices/hv_24x7/interface/coresperchip Signed-off-by:
-
Kajol Jain authored
To expose the system dependent parameter like total number of sockets and numbers of chips per socket, patch adds two sysfs files. "sockets" and "chips" are added to /sys/devices/hv_24x7/interface/ of the "hv_24x7" pmu. Signed-off-by:
-
