- 16 Sep, 2009 2 commits
-
-
Ingo Molnar authored
Use 'perf sched latency' to track the current task based on context-switch events, and flag the cases where there's some impossible transition: such as a PID being switched out that was not switched in. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Output such lost event and state machine weirdness stats: TOTAL: | 14974.910 ms | 46384 | --------------------------------------------------- INFO: 8.865% lost events (19132 out of 215819, in 8 chunks) INFO: 0.198% state machine bugs (49 out of 24708) (due to lost events?) And increase buffering to -m 1024 (4 MB) by default. Since we use output multiplexing that kind of space is needed. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
- 14 Sep, 2009 6 commits
-
-
mingo authored
This allows more precise 'perf sched latency' output: --------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | --------------------------------------------------------------------------------------- ksoftirqd/0-4 | 0.010 ms | 2 | avg: 2.476 ms | max: 2.977 ms | perf-12328 | 15.844 ms | 66 | avg: 1.118 ms | max: 9.979 ms | bdi-default-235 | 0.009 ms | 1 | avg: 0.998 ms | max: 0.998 ms | events/1-8 | 0.020 ms | 2 | avg: 0.998 ms | max: 0.998 ms | events/0-7 | 0.018 ms | 2 | avg: 0.992 ms | max: 0.996 ms | sleep-12329 | 0.742 ms | 3 | avg: 0.906 ms | max: 2.289 ms | sshd-12122 | 0.163 ms | 2 | avg: 0.283 ms | max: 0.562 ms | loop-getpid-lon-12322 | 1023.636 ms | 69 | avg: 0.208 ms | max: 5.996 ms | loop-getpid-lon-12321 | 1038.638 ms | 5 | avg: 0.073 ms | max: 0.171 ms | migration/1-5 | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | --------------------------------------------------------------------------------------- TOTAL: | 2079.078 ms | 153 | ------------------------------------------------- Also, streamline the code a bit more, add asserts for various state machine failures (they should be debugged if they occur) and fix a few odd ends. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
mingo authored
Often it's useful to know the PID of the task as well - print it out too. ( While at it, reformat the output to be a bit more paste-into-commit-logs friendly. ) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Before: ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- perf |4853313.251 ms | 10 | avg: 0.046 ms | max: 0.337 ms | flush-8:0 |2426659.202 ms | 5 | avg: 0.015 ms | max: 0.016 ms | sleep |485331.966 ms | 1 | avg: 0.012 ms | max: 0.012 ms | ksoftirqd/1 |485331.320 ms | 1 | avg: 0.005 ms | max: 0.005 ms | ----------------------------------------------------------------------------------- TOTAL: |8250635.739 ms | 17 | --------------------------------------------- After: ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- perf | 0.206 ms | 10 | avg: 0.046 ms | max: 0.337 ms | flush-8:0 | 2.680 ms | 5 | avg: 0.015 ms | max: 0.016 ms | sleep | 0.662 ms | 1 | avg: 0.012 ms | max: 0.012 ms | ksoftirqd/1 | 0.015 ms | 1 | avg: 0.005 ms | max: 0.005 ms | ----------------------------------------------------------------------------------- TOTAL: | 3.563 ms | 17 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Frederic Weisbecker authored
Currently it's possible to meet such too high latency results with 'perf sched latency'. ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- xfce4-panel | 0.222 ms | 2 | avg: 4718.345 ms | max: 9436.493 ms | scsi_eh_3 | 3.962 ms | 36 | avg: 55.957 ms | max: 1977.829 ms | The origin is on traces that are sometimes badly serialized across cpus. For example the raw traces that raised such results for xfce4-panel: (1) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (2) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (3) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] The traces are processed in the order they arrive. Then in (2), xfce4-panel sleeps, it is first waken up in (3) and eventually scheduled in (5). The latency reported is then 1504 - 1495 = 9 secs, as reported by perf sched. But this is wrong, we are confident in the fact the traces are nicely serialized while we should actually more trust the timestamps. If we reorder by timestamps we get: (1) Xorg-4276 [001] 1494.663860125: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (2) [init]-0 [000] 1494.663899990: sched_switch: task swapper:0 [140] (R) ==> xfce4-panel:4569 [120] (3) xfce4-panel-4569 [000] 1494.663928373: sched_switch: task xfce4-panel:4569 [120] (S) ==> swapper:0 [140] (4) Xorg-4276 [001] 1504.098252756: sched_wakeup: task xfce4-panel:4569 [120] success=1 [000] (5) perf-5219 [000] 1504.100353302: sched_switch: task perf:5219 [120] (S) ==> xfce4-panel:4569 [120] Now the trace make more sense, xfce4-panel is sleeping. Then it is woken up in (1), scheduled in (2) It goes to sleep in (3), woken up in (4) and scheduled in (5). Now, latency captured between (1) and (2) is of 39 us. And between (4) and (5) it is 2.1 ms. Such pattern of bad serializing is the origin of the high latencies reported by perf sched. Basically, we need to check whether wake up time is higher than schedule out time. If it's not the case, we need to tag the current work atom as invalid. Beside that, we may need to work later on a better ordering of the traces given by the kernel. After this patch: xfce4-session | 0.221 ms | 1 | avg: 0.538 ms | max: 0.538 ms | Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Frederic Weisbecker authored
Add an option to multiplex counters output in the channel of the group leader, ie: the first counter opened: -M --multiplex The effect is better serialized samples. This is especially useful for tracepoint samples that need to be well serialized for their post-processing. Also make use of this option in 'perf sched'. Signed-off-by:
-
- 13 Sep, 2009 24 commits
-
-
Ingo Molnar authored
This allows more precise tracking of how the scheduler accounts (and acts upon) a task having spent N nanoseconds of CPU time. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Alias 'perf sched trace' to 'perf trace', for workflow completeness. Add a bit of documentation for perf sched. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Before: $ perf sched record -f sleep 1 Error: failed to mmap with 1 (Operation not permitted) After: $ perf sched record -f sleep 1 [ perf record: Captured and wrote 0.095 MB perf.data (~4161 samples) ] Note, this is only allowed if perfcounter_paranoid is set to the most permissive (non-default) value of -1. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Implement the 'perf sched record' subcommand that adds a default list of events, turns on raw sampling and system-wide tracing and passes off the rest of the command to perf record. This is more convenient than having to specify the events all the time. Before: $ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1 After: $ perf sched record -f sleep 1 Also fix an assumption in the event string parser that assumed that strings passed in can be modified. (In this case they wont be as they come from a readonly constant section.) Signed-off-by: -
Ingo Molnar authored
Use a sort list for thread atoms insertion as well - instead of hardcoded for PID. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
- Rename 'latency' field/variable names to the better 'atom' ones - Reduce the number of #include lines and consolidate them - Gather file scope variables at the top of the file - Remove unused bits No change in functionality. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Separate the option parsing cleanly and add two variants: - 'perf sched latency' (can be abbreviated via 'perf sched lat') - 'perf sched replay' (can be abbreviated via 'perf sched rep') Also add a repeat count option to replay and add a separation set of options for replay. Do the sorting setup only in the latency sub-command. Display separate help screens for 'perf sched' and 'perf sched replay -h' - i.e. further separation of the sub-commands. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Frederic Weisbecker authored
Implement multidimensional sorting on perf sched so that you can sort either by number of switches, latency average, latency maximum, runtime. perf sched -l -s avg,max (this is the default) ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- gnome-power-man | 0.113 ms | 1 | avg: 4998.531 ms | max: 4998.531 ms | xfdesktop | 1.190 ms | 7 | avg: 136.475 ms | max: 940.933 ms | xfce-mcs-manage | 2.194 ms | 22 | avg: 38.534 ms | max: 735.174 ms | notification-da | 2.749 ms | 31 | avg: 27.436 ms | max: 731.791 ms | xfce4-session | 3.343 ms | 28 | avg: 26.796 ms | max: 734.891 ms | xfwm4 | 3.159 ms | 22 | avg: 12.406 ms | max: 241.333 ms | xchat | 42.789 ms | 214 | avg: 11.886 ms | max: 100.349 ms | xfce4-terminal | 5.386 ms | 22 | avg: 11.414 ms | max: 241.611 ms | firefox | 151.992 ms | 123 | avg: 9.543 ms | max: 153.717 ms | xfce4-panel | 24.324 ms | 47 | avg: 8.189 ms | max: 242.352 ms | :5090 | 6.932 ms | 111 | avg: 8.131 ms | max: 102.665 ms | events/0 | 0.758 ms | 12 | avg: 1.964 ms | max: 21.879 ms | Xorg | 280.558 ms | 340 | avg: 1.864 ms | max: 99.526 ms | geany | 63.391 ms | 295 | avg: 1.099 ms | max: 9.334 ms | reiserfs/0 | 0.039 ms | 2 | avg: 0.854 ms | max: 1.487 ms | kondemand/0 | 8.251 ms | 245 | avg: 0.691 ms | max: 34.372 ms | Signed-off-by:
-
Frederic Weisbecker authored
We are dividing a time in ns by 1e9. This is a nsec to sec conversion. What we want is msecs. Fix it by dividing by 1e6. Signed-off-by:
-
Frederic Weisbecker authored
Add a field in the thread atom list that keeps track of the total and max latencies and also the total runtime. This makes a faster output and also prepares for sorting. Signed-off-by:
-
Frederic Weisbecker authored
Currently in perf sched, we are measuring the scheduler wakeup latencies. Now we also want measure the time a task wait to be scheduled after it gets preempted. Signed-off-by:
-
Frederic Weisbecker authored
To measures the latencies, we capture the sched atoms data into a specific structure named struct lat_snapshot. As this structure can be used for other purposes of scheduler profiling and mirrors what happens in a thread work atom, lets rename it to struct work_atom and propagate this renaming in other functions and structures names to keep it coherent. Signed-off-by:
-
Ingo Molnar authored
After: ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- make | 0.678 ms | 13 | avg: 0.018 ms | max: 0.050 ms | gcc | 0.014 ms | 2 | avg: 0.320 ms | max: 0.627 ms | gcc | 0.000 ms | 2 | avg: 0.185 ms | max: 0.369 ms | ... ----------------------------------------------------------------------------------- TOTAL: | 21.316 ms | 63 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Extend the latency tracking structure with scheduling atom runtime info - and sum it up during per task display. (Also clean up a few details.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
After: ----------------------------------------------------------------------------------- Task | runtime ms | switches | average delay ms | maximum delay ms | ----------------------------------------------------------------------------------- migration/0 | 0.000 ms | 1 | avg: 0.047 ms | max: 0.047 ms | ksoftirqd/0 | 0.000 ms | 1 | avg: 0.039 ms | max: 0.039 ms | migration/1 | 0.000 ms | 3 | avg: 0.013 ms | max: 0.016 ms | migration/3 | 0.000 ms | 2 | avg: 0.003 ms | max: 0.004 ms | migration/4 | 0.000 ms | 1 | avg: 0.022 ms | max: 0.022 ms | distccd | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | distccd | 0.000 ms | 1 | avg: 0.014 ms | max: 0.014 ms | distccd | 0.000 ms | 2 | avg: 0.000 ms | max: 0.000 ms | distccd | 0.000 ms | 2 | avg: 0.012 ms | max: 0.019 ms | distccd | 0.000 ms | 1 | avg: 0.002 ms | max: 0.002 ms | as | 0.000 ms | 2 | avg: 0.019 ms | max: 0.019 ms | as | 0.000 ms | 3 | avg: 0.015 ms | max: 0.017 ms | as | 0.000 ms | 1 | avg: 0.009 ms | max: 0.009 ms | perf | 0.000 ms | 1 | avg: 0.001 ms | max: 0.001 ms | gcc | 0.000 ms | 1 | avg: 0.021 ms | max: 0.021 ms | run-mozilla.sh | 0.000 ms | 2 | avg: 0.010 ms | max: 0.017 ms | mozilla-plugin- | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | gcc | 0.000 ms | 2 | avg: 0.013 ms | max: 0.013 ms | ----------------------------------------------------------------------------------- (The runtime ms column is not filled in yet.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
- Separate the latency and the replay commands more cleanly - Use consistent naming - Display help page on 'perf sched' outlining comments, instead of aborting Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Frederic Weisbecker authored
Add the -l --latency option that reports statistics about the scheduler latencies. For now, the latencies are measured in the following sequence scope: - task A is sleeping (D or S state) - task B wakes up A ^ | | latency timeframe | | v - task A is scheduled in Start by recording every scheduler events: perf record -e sched:* and then fetch the results: perf sched -l Tasks count total avg max migration/0 2 39849 19924 28826 ksoftirqd/0 7 756383 108054 373014 migration/1 5 45391 9078 10452 ksoftirqd/1 2 399055 199527 359130 events/0 8 4780110 597513 4500250 events/1 9 6353057 705895 2986012 kblockd/0 42 37805097 900121 5077684 The snapshot are in nanoseconds. - Count: number of snapshots taken for the given task - Total: total latencies in nanosec - Avg : average of latency between wake up and sched in - Max : max snapshot latency Signed-off-by: -
Frederic Weisbecker authored
Create a sched event structure of handlers in which various sched events reader can plug their own callbacks. This makes easier the addition of new perf sched sub commands. Signed-off-by:
-
Frederic Weisbecker authored
perf sched raises the following error when it meets a sched switch event: perf: builtin-sched.c:286: register_pid: Assertion `!(pid >= 65536)' failed. Abandon Currently in x86-64, the sched switch events have a hole in the middle of the structure: u16 common_type; u8 common_flags; u8 common_preempt_count; u32 common_pid; u32 common_tgid; char prev_comm[16]; u32 prev_pid; u32 prev_prio; <--- there u64 prev_state; char next_comm[16]; u32 next_pid; u32 next_prio; Gcc inserts a 4 bytes hole there for prev_state to be u64 aligned. And the events are exported to userspace with this hole. But in userspace, from perf sched, we fetch it using a structure that has a new field in the beginning: u32 size. This is because our trace is exported with its size as a field. But now that we have this new field, the hole in the middle disappears because it makes prev_state becoming well aligned. And since we are using a pointer to the raw trace using this struct, instead of reading prev_state, we are reading the hole. We could fix it by keeping the size seperate from the struct but actually there a lot of other potential problems: some fields may be saved as long in a 64 bits system and later read as long in a 32 bits system. Also this direct cast doesn't care about the endianness differences between the host traced machine and the machine in which we do the post processing. So instead of using such dangerous direct casts, fetch the values using the trace parsing API that already takes care of all these problems. Signed-off-by:
-
Frederic Weisbecker authored
Currently, when one wants to activate every tracepoint counters of a subsystem from perf record, the current sequence is needed: perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3 This may annoy the most patient of us. Now we can just do: perf record -e subsys:* Signed-off-by:
-
Ingo Molnar authored
Various small cleanups - removal of debug printks and dead functions, etc. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Integrate the schedbench.c bits with the raw trace events that we get from the perf machinery, and activate the workload replayer/simulator. Example of a captured 'make -j' workload: $ perf sched run measurement overhead: 90 nsecs sleep measurement overhead: 2724743 nsecs the run test took 1000081 nsecs the sleep test took 2981111 nsecs version = 0.5 ... nr_run_events: 70 nr_sleep_events: 66 nr_wakeup_events: 9 target-less wakeups: 71 multi-target wakeups: 47 run events optimized: 139 task 0 ( perf: 6607), nr_events: 2 task 1 ( perf: 6608), nr_events: 6 task 2 ( : 0), nr_events: 1 task 3 ( make: 6609), nr_events: 5 task 4 ( sh: 6610), nr_events: 4 task 5 ( make: 6611), nr_events: 6 task 6 ( sh: 6612), nr_events: 4 task 7 ( make: 6613), nr_events: 5 task 8 ( migration/11: 25), nr_events: 1 task 9 ( migration/13: 29), nr_events: 1 task 10 ( migration/15: 33), nr_events: 1 task 11 ( migration/9: 21), nr_events: 1 task 12 ( sh: 6614), nr_events: 4 task 13 ( make: 6615), nr_events: 5 task 14 ( sh: 6616), nr_events: 4 task 15 ( make: 6617), nr_events: 7 task 16 ( migration/3: 9), nr_events: 1 task 17 ( migration/5: 13), nr_events: 1 task 18 ( migration/7: 17), nr_events: 1 task 19 ( migration/1: 5), nr_events: 1 task 20 ( sh: 6618), nr_events: 4 task 21 ( make: 6619), nr_events: 5 task 22 ( sh: 6620), nr_events: 4 task 23 ( make: 6621), nr_events: 10 task 24 ( sh: 6623), nr_events: 3 task 25 ( gcc: 6624), nr_events: 4 task 26 ( gcc: 6625), nr_events: 4 task 27 ( gcc: 6626), nr_events: 5 task 28 ( collect2: 6627), nr_events: 5 task 29 ( sh: 6622), nr_events: 1 task 30 ( make: 6628), nr_events: 7 task 31 ( sh: 6630), nr_events: 4 task 32 ( gcc: 6631), nr_events: 4 task 33 ( sh: 6629), nr_events: 1 task 34 ( gcc: 6632), nr_events: 4 task 35 ( gcc: 6633), nr_events: 4 task 36 ( collect2: 6634), nr_events: 4 task 37 ( make: 6635), nr_events: 8 task 38 ( sh: 6637), nr_events: 4 task 39 ( sh: 6636), nr_events: 1 task 40 ( gcc: 6638), nr_events: 4 task 41 ( gcc: 6639), nr_events: 4 task 42 ( gcc: 6640), nr_events: 4 task 43 ( collect2: 6641), nr_events: 4 task 44 ( make: 6642), nr_events: 6 task 45 ( sh: 6643), nr_events: 5 task 46 ( sh: 6644), nr_events: 3 task 47 ( sh: 6645), nr_events: 4 task 48 ( make: 6646), nr_events: 6 task 49 ( sh: 6647), nr_events: 3 task 50 ( make: 6648), nr_events: 5 task 51 ( sh: 6649), nr_events: 5 task 52 ( sh: 6650), nr_events: 6 task 53 ( make: 6651), nr_events: 4 task 54 ( make: 6652), nr_events: 5 task 55 ( make: 6653), nr_events: 4 task 56 ( make: 6654), nr_events: 4 task 57 ( make: 6655), nr_events: 5 task 58 ( sh: 6656), nr_events: 4 task 59 ( gcc: 6657), nr_events: 9 task 60 ( ksoftirqd/3: 10), nr_events: 1 task 61 ( gcc: 6658), nr_events: 4 task 62 ( make: 6659), nr_events: 5 task 63 ( sh: 6660), nr_events: 3 task 64 ( gcc: 6661), nr_events: 5 task 65 ( collect2: 6662), nr_events: 4 ------------------------------------------------------------ #1 : 256.745, ravg: 256.74, cpu: 0.00 / 0.00 #2 : 439.372, ravg: 275.01, cpu: 0.00 / 0.00 #3 : 411.971, ravg: 288.70, cpu: 0.00 / 0.00 #4 : 385.500, ravg: 298.38, cpu: 0.00 / 0.00 #5 : 366.526, ravg: 305.20, cpu: 0.00 / 0.00 #6 : 381.281, ravg: 312.81, cpu: 0.00 / 0.00 #7 : 410.756, ravg: 322.60, cpu: 0.00 / 0.00 #8 : 368.009, ravg: 327.14, cpu: 0.00 / 0.00 #9 : 408.098, ravg: 335.24, cpu: 0.00 / 0.00 #10 : 368.582, ravg: 338.57, cpu: 0.00 / 0.00 I.e. we successfully analyzed the trace, replayed it via real threads and measured the replayed workload's scheduling properties. This is how it looked like in 'top' output: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 7164 mingo 20 0 1434m 8080 888 R 57.0 0.1 0:02.04 :perf 7165 mingo 20 0 1434m 8080 888 R 41.8 0.1 0:01.52 :perf 7228 mingo 20 0 1434m 8080 888 R 39.8 0.1 0:01.44 :gcc 7225 mingo 20 0 1434m 8080 888 R 33.8 0.1 0:01.26 :gcc 7202 mingo 20 0 1434m 8080 888 R 31.2 0.1 0:01.16 :sh 7222 mingo 20 0 1434m 8080 888 R 25.2 0.1 0:00.96 :sh 7211 mingo 20 0 1434m 8080 888 R 21.9 0.1 0:00.82 :sh 7213 mingo 20 0 1434m 8080 888 D 19.2 0.1 0:00.74 :sh 7194 mingo 20 0 1434m 8080 888 D 18.6 0.1 0:00.72 :make There's still various kinks in it - more patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
Import the schedbench.c tool that i wrote some time ago to simulate scheduler behavior but never finished. It's a good basis for perf sched nevertheless. Most of its guts are not hooked up to the perf event loop yet - that will be done in the patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: -
Ingo Molnar authored
This turn-key tool allows scheduler measurements to be conducted and the results be displayed numerically. First baby step towards that goal: clone the new command off of perf trace. Fix a few other details along the way: - add (minimal) perf trace documentation - reorder a few places - list perf trace in the mainporcelain list as well as it's a very useful utility. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by:
-
- 11 Sep, 2009 8 commits
-
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (87 commits) NFSv4: Disallow 'mount -t nfs4 -overs=2' and 'mount -t nfs4 -overs=3' NFS: Allow the "nfs" file system type to support NFSv4 NFS: Move details of nfs4_get_sb() to a helper NFS: Refactor NFSv4 text-based mount option validation NFS: Mount option parser should detect missing "port=" NFS: out of date comment regarding O_EXCL above nfs3_proc_create() NFS: Handle a zero-length auth flavor list SUNRPC: Ensure that sunrpc gets initialised before nfs, lockd, etc... nfs: fix compile error in rpc_pipefs.h nfs: Remove reference to generic_osync_inode from a comment SUNRPC: cache must take a reference to the cache detail's module on open() NFS: Use the DNS resolver in the mount code. NFS: Add a dns resolver for use with NFSv4 referrals and migration SUNRPC: Fix a typo in cache_pipefs_files nfs: nfs4xdr: optimize low level decoding nfs: nfs4xdr: get rid of READ_BUF nfs: nfs4xdr: simplify decode_exchange_id by reusing decode_opaque_inline nfs: nfs4xdr: get rid of COPYMEM nfs: nfs4xdr: introduce decode_sessionid helper nfs: nfs4xdr: introduce decode_verifier helper ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (25 commits) pata_rz1000: use printk_once ahci: kill @force_restart and refine CLO for ahci_kick_engine() pata_cs5535: add pci id for AMD based CS5535 controllers ahci: Add AMD SB900 SATA/IDE controller device IDs drivers/ata: use resource_size sata_fsl: Defer non-ncq commands when ncq commands active libata: add SATA PMP revision information for spec 1.2 libata: fix off-by-one error in ata_tf_read_block() ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMA ahci: make ahci_asus_m2a_vm_32bit_only() quirk more generic dmi: extend dmi_get_year() to dmi_get_date() dmi: fix date handling in dmi_get_year() libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru() sata_sis: convert to slave_link sata_sil24: always set protocol override for non-ATAPI data commands libata: Export AHCI capabilities libata: Delegate nonrot flag setting to SCSI [libata] Add pata_rdc driver for RDC ATA devices drivers/ata: Remove unnecessary semicolons libata: remove spindown skipping and warning ...
-
Linus Torvalds authored
Merge branch 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits) ring-buffer: only enable ring_buffer_swap_cpu when needed ring-buffer: check for swapped buffers in start of committing tracing: report error in trace if we fail to swap latency buffer tracing: add trace_array_printk for internal tracers to use tracing: pass around ring buffer instead of tracer tracing: make tracing_reset safe for external use tracing: use timestamp to determine start of latency traces tracing: Remove mentioning of legacy latency_trace file from documentation tracing/filters: Defer pred allocation, fix memory leak tracing: remove users of tracing_reset tracing: disable buffers and synchronize_sched before resetting tracing: disable update max tracer while reading trace tracing: print out start and stop in latency traces ring-buffer: disable all cpu buffers when one finds a problem ring-buffer: do not count discarded events ring-buffer: remove ring_buffer_event_discard ring-buffer: fix ring_buffer_read crossing pages ring-buffer: remove unnecessary cpu_relax ring-buffer: do not swap buffers during a commit ring-buffer: do not reset while in a commit ...
-
Linus Torvalds authored
Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (64 commits) sched: Fix sched::sched_stat_wait tracepoint field sched: Disable NEW_FAIR_SLEEPERS for now sched: Keep kthreads at default priority sched: Re-tune the scheduler latency defaults to decrease worst-case latencies sched: Turn off child_runs_first sched: Ensure that a child can't gain time over it's parent after fork() sched: enable SD_WAKE_IDLE sched: Deal with low-load in wake_affine() sched: Remove short cut from select_task_rq_fair() sched: Turn on SD_BALANCE_NEWIDLE sched: Clean up topology.h sched: Fix dynamic power-balancing crash sched: Remove reciprocal for cpu_power sched: Try to deal with low capacity, fix update_sd_power_savings_stats() sched: Try to deal with low capacity sched: Scale down cpu_power due to RT tasks sched: Implement dynamic cpu_power sched: Add smt_gain sched: Update the cpu_power sum during load-balance sched: Add SD_PREFER_SIBLING ...
-
Linus Torvalds authored
Merge branch 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits) perf tools: Avoid unnecessary work in directory lookups perf stat: Clean up statistics calculations a bit more perf stat: More advanced variance computation perf stat: Use stddev_mean in stead of stddev perf stat: Remove the limit on repeat perf stat: Change noise calculation to use stddev x86, perf_counter, bts: Do not allow kernel BTS tracing for now x86, perf_counter, bts: Correct pointer-to-u64 casts x86, perf_counter, bts: Fail if BTS is not available perf_counter: Fix output-sharing error path perf trace: Fix read_string() perf trace: Print out in nanoseconds perf tools: Seek to the end of the header area perf trace: Fix parsing of perf.data perf trace: Sample timestamps as well perf_counter: Introduce new (non-)paranoia level to allow raw tracepoint access perf trace: Sample the CPU too perf tools: Work around strict aliasing related warnings perf tools: Clean up warnings list in the Makefile perf tools: Complete support for dynamic strings ...
-
Linus Torvalds authored
Merge branch 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'oprofile-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (55 commits) arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type Revert "x86: oprofile/op_model_amd.c set return values for op_amd_handle_ibs()" x86/oprofile: Small coding style fixes x86/oprofile: Add counter reservation check for virtual counters x86/oprofile: Implement op_x86_virt_to_phys() oprofile: Adding switch counter to oprofile statistic variables x86/oprofile: Implement mux_clone() x86/oprofile: Enable multiplexing only if the model supports it x86/oprofile: Add function has_mux() to check multiplexing support x86/oprofile: Modify initialization of num_virt_counters x86/oprofile: Remove unused num_virt_controls from struct op_x86_model_spec x86/oprofile: Remove const qualifier from struct op_x86_model_spec x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in nmi_int.c x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c x86/oprofile: Implement multiplexing setup/shutdown functions oprofile: Grouping multiplexing code in op_model_amd.c oprofile: Introduce op_x86_phys_to_virt() oprofile: Grouping multiplexing code in oprof.c oprofile: Remove oprofile_multiplexing_init() ...
-
Linus Torvalds authored
Merge branch 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-threaded-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Do not mask oneshot edge type interrupts genirq: Support nested threaded irq handling genirq: Add buslock support genirq: Add oneshot support
-
Linus Torvalds authored
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: pci/intr_remapping: Allocate irq_iommu on node irq: Add irq_node() primitive irq: Make sure irq_desc for legacy irq get correct node setting genirq: Add prototype for handle_nested_irq() irq: Remove superfluous NULL pointer check in check_irq_resend() irq: Clean up by removing irqfixup MODULE_PARM_DESC() genirq: Fix comment describing suspend_device_irqs() genirq: Remove obsolete defines and typedefs
-
