Skip to content

L
linux
Switch branch/tag
  1. 17 Apr, 2019 21 commits
  3. 05 Apr, 2019 19 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.14.111 · 1ec8f1f0
      Greg Kroah-Hartman authored
      1ec8f1f0
    • Hans de Goede's avatar
      ACPI / video: Extend chassis-type detection with a "Lunch Box" check · 30d7823d
      Hans de Goede authored 
      [ Upstream commit d693c008 ]

Commit 53fa1f6e ("ACPI / video: Only default only_lcd to true on
Win8-ready _desktops_") introduced chassis type detection, limiting the
lcd_only check for the backlight to devices where the chassis-type
indicates their is no builtin LCD panel.

The purpose of the lcd_only check is to avoid advertising a backlight
interface on desktops, since skylake and newer machines seem to always
have a backlight interface even if there is no LCD panel. The limiting
of this check to desktops only was done to avoid breaking backlight
support on some laptops which do not have the lcd flag set.

The Fujitsu ESPRIMO Q910 which is a compact (NUC like) desktop machine
has a chassis type of 0x10 aka "Lunch Box". Without the lcd_only check
we end up falsely advertising backlight/brightness control on this
device. This commit extend the dmi_is_desktop check to return true
for type 0x10 to fix this.

Fixes: 53fa1f6e ("ACPI / video: Only default only_lcd to true ...")
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      30d7823d
    • Ville Syrjälä's avatar
      drm/dp/mst: Configure no_stop_bit correctly for remote i2c xfers · 5cf6953f
      Ville Syrjälä authored 
      [ Upstream commit c978ae9b ]

We aren't supposed to force a stop+start between every i2c msg
when performing multi message transfers. This should eg. cause
the DDC segment address to be reset back to 0 between writing
the segment address and reading the actual EDID extension block.

To quote the E-DDC spec:
"... this standard requires that the segment pointer be
 reset to 00h when a NO ACK or a STOP condition is received."

Since we're going to touch this might as well consult the
I2C_M_STOP flag to determine whether we want to force the stop
or not.

Cc: Brian Vincent <brainn@gmail.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by: default avatarVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by: default avatarDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      5cf6953f
    • Ben Dooks's avatar
      dmaengine: tegra: avoid overflow of byte tracking · cf44af74
      Ben Dooks authored 
      [ Upstream commit e486df39 ]

The dma_desc->bytes_transferred counter tracks the number of bytes
moved by the DMA channel. This is then used to calculate the information
passed back in the in the tegra_dma_tx_status callback, which is usually
fine.

When the DMA channel is configured as continous, then the bytes_transferred
counter will increase over time and eventually overflow to become negative
so the residue count will become invalid and the ALSA sound-dma code will
report invalid hardware pointer values to the application. This results in
some users becoming confused about the playout position and putting audio
data in the wrong place.

To fix this issue, always ensure the bytes_transferred field is modulo the
size of the request. We only do this for the case of the cyclic transfer
done ISR as anyone attempting to move 2GiB of DMA data in one transfer
is unlikely.

Note, we don't fix the issue that we should /never/ transfer a negative
number of bytes so we could make those fields unsigned.
Reviewed-by: default avatarDmitry Osipenko <digetx@gmail.com>
Signed-off-by: default avatarBen Dooks <ben.dooks@codethink.co.uk>
Acked-by: default avatarJon Hunter <jonathanh@nvidia.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      cf44af74
    • Katsuhiro Suzuki's avatar
      clk: rockchip: fix frac settings of GPLL clock for rk3328 · 80433260
      Katsuhiro Suzuki authored 
      [ Upstream commit a0e447b0 ]

This patch fixes settings of GPLL frequency in fractional mode for
rk3328. In this mode, FOUTVCO is calcurated by following formula:
  FOUTVCO = FREF * FBDIV / REFDIV + ((FREF * FRAC / REFDIV) >> 24)

The problem is in FREF * FRAC >> 24 term. This result always lacks
one from target value is specified by rate member. For example first
itme of rk3328_pll_frac_rate originally has
  - rate  : 1016064000
  - refdiv: 3
  - fbdiv : 127
  - frac  : 134217
  - FREF * FBDIV / REFDIV        = 1016000000
  - (FREF * FRAC / REFDIV) >> 24 = 63999
Thus calculated rate is 1016063999. It seems wrong.

If frac has 134218 (it is increased 1 from original value), second
term is 64000. All other items have same situation. So this patch
adds 1 to frac member in all items of rk3328_pll_frac_rate.
Signed-off-by: default avatarKatsuhiro Suzuki <katsuhiro@katsuster.net>
Acked-by: default avatarElaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      80433260
    • Rafael Ávila de Espíndola's avatar
      x86/build: Mark per-CPU symbols as absolute explicitly for LLD · 1d0961c1
      Rafael Ávila de Espíndola authored 
      [ Upstream commit d071ae09 ]

Accessing per-CPU variables is done by finding the offset of the
variable in the per-CPU block and adding it to the address of the
respective CPU's block.

Section 3.10.8 of ld.bfd's documentation states:

  For expressions involving numbers, relative addresses and absolute
  addresses, ld follows these rules to evaluate terms:

  Other binary operations, that is, between two relative addresses
  not in the same section, or between a relative address and an
  absolute address, first convert any non-absolute term to an
  absolute address before applying the operator."

Note that LLVM's linker does not adhere to the GNU ld's implementation
and as such requires implicitly-absolute terms to be explicitly marked
as absolute in the linker script. If not, it fails currently with:

  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute
  ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute
  Makefile:1040: recipe for target 'vmlinux' failed

This is not a functional change for ld.bfd which converts the term to an
absolute symbol anyways as specified above.

Based on a previous submission by Tri Vo <trong@android.com>.
Reported-by: default avatarDmitry Golovin <dima@golovin.in>
Signed-off-by: default avatarRafael Ávila de Espíndola <rafael@espindo.la>
[ Update commit message per Boris' and Michael's suggestions. ]
Signed-off-by: default avatarNick Desaulniers <ndesaulniers@google.com>
[ Massage commit message more, fix typos. ]
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Tested-by: default avatarDmitry Golovin <dima@golovin.in>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Cao Jin <caoj.fnst@cn.fujitsu.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tri Vo <trong@android.com>
Cc: dima@golovin.in
Cc: morbo@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181219190145.252035-1-ndesaulniers@google.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      1d0961c1
    • Zumeng Chen's avatar
      wlcore: Fix memory leak in case wl12xx_fetch_firmware failure · d2a1b60a
      Zumeng Chen authored 
      [ Upstream commit ba2ffc96 ]

Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware
failed instead of meaningless goto out to avoid the following memory leak
reports(Only the last one listed):

unreferenced object 0xc28a9a00 (size 512):
  comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<6624adab>] kmemleak_alloc+0x40/0x74
    [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270
    [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore]
    [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore]
    [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211]
    [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211]
    [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211]
    [<7e1d425a>] process_one_work+0x284/0x42c
    [<55f9432e>] worker_thread+0x2fc/0x48c
    [<abb582c6>] kthread+0x148/0x160
    [<63144b13>] ret_from_fork+0x14/0x2c
    [< (null)>] (null)
    [<1f6e7715>] 0xffffffff
Signed-off-by: default avatarZumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d2a1b60a
    • Ondrej Mosnacek's avatar
      selinux: do not override context on context mounts · 0ce68e86
      Ondrej Mosnacek authored 
      [ Upstream commit 53e0c2aa ]

Ignore all selinux_inode_notifysecctx() calls on mounts with SBLABEL_MNT
flag unset. This is achived by returning -EOPNOTSUPP for this case in
selinux_inode_setsecurtity() (because that function should not be called
in such case anyway) and translating this error to 0 in
selinux_inode_notifysecctx().

This fixes behavior of kernfs-based filesystems when mounted with the
'context=' option. Before this patch, if a node's context had been
explicitly set to a non-default value and later the filesystem has been
remounted with the 'context=' option, then this node would show up as
having the manually-set context and not the mount-specified one.

Steps to reproduce:
    # mount -t cgroup2 cgroup2 /sys/fs/cgroup/unified
    # chcon unconfined_u:object_r:user_home_t:s0 /sys/fs/cgroup/unified/cgroup.stat
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:cgroup_t:s0        0 Dec 13 10:41 cgroup.threads
    # umount /sys/fs/cgroup/unified
    # mount -o context=system_u:object_r:tmpfs_t:s0 -t cgroup2 cgroup2 /sys/fs/cgroup/unified

Result before:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root unconfined_u:object_r:user_home_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0         0 Dec 13 10:41 cgroup.threads

Result after:
    # ls -lZ /sys/fs/cgroup/unified
    total 0
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.controllers
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.depth
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.max.descendants
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.procs
    -r--r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.stat
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.subtree_control
    -rw-r--r--. 1 root root system_u:object_r:tmpfs_t:s0 0 Dec 13 10:41 cgroup.threads
Signed-off-by: default avatarOndrej Mosnacek <omosnace@redhat.com>
Reviewed-by: default avatarStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: default avatarPaul Moore <paul@paul-moore.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      0ce68e86
    • George Rimar's avatar
      x86/build: Specify elf_i386 linker emulation explicitly for i386 objects · 621f35e5
      George Rimar authored 
      [ Upstream commit 927185c1 ]

The kernel uses the OUTPUT_FORMAT linker script command in it's linker
scripts. Most of the time, the -m option is passed to the linker with
correct architecture, but sometimes (at least for x86_64) the -m option
contradicts the OUTPUT_FORMAT directive.

Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object
files, but are linked with the -m elf_x86_64 linker flag when building
for x86_64.

The GNU linker manpage doesn't explicitly state any tie-breakers between
-m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT
overrides the emulation value specified with the -m option.

LLVM lld has a different behavior, however. When supplied with
contradicting -m and OUTPUT_FORMAT values it fails with the following
error message:

  ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64

Therefore, just add the correct -m after the incorrect one (it overrides
it), so the linker invocation looks like this:

  ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \
    realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf

This is not a functional change for GNU ld, because (although not
explicitly documented) OUTPUT_FORMAT overrides -m EMULATION.

Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting
it in QEMU.

 [ bp: massage and clarify text. ]
Suggested-by: default avatarDmitry Golovin <dima@golovin.in>
Signed-off-by: default avatarGeorge Rimar <grimar@accesssoftek.com>
Signed-off-by: default avatarTri Vo <trong@android.com>
Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
Tested-by: default avatarTri Vo <trong@android.com>
Tested-by: default avatarNick Desaulniers <ndesaulniers@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Matz <matz@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: morbo@google.com
Cc: ndesaulniers@google.com
Cc: ruiu@google.com
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190111201012.71210-1-trong@android.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      621f35e5
    • Daniel Vetter's avatar
      drm/nouveau: Stop using drm_crtc_force_disable · 3025691e
      Daniel Vetter authored 
      [ Upstream commit 934c5b32 ]

The correct way for legacy drivers to update properties that need to
do a full modeset, is to do a full modeset.

Note that we don't need to call the drm_mode_config_internal helper
because we're not changing any of the refcounted paramters.

v2: Fixup error handling (Ville). Since the old code didn't bother
I decided to just delete it instead of adding even more code for just
error handling.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217194303.14397-2-daniel.vetter@ffwll.chSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      3025691e
    • Paul Kocialkowski's avatar
      drm: Auto-set allow_fb_modifiers when given modifiers at plane init · 0cab1159
      Paul Kocialkowski authored 
      [ Upstream commit 890880dd ]

When drivers pass non-empty lists of modifiers for initializing their
planes, we can infer that they allow framebuffer modifiers and set the
driver's allow_fb_modifiers mode config element.

In case the allow_fb_modifiers element was not set (some drivers tend
to set them after registering planes), the modifiers will still be
registered but won't be available to userspace unless the flag is set
later. However in that case, the IN_FORMATS blob won't be created.

In order to avoid this case and generally reduce the trouble associated
with the flag, always set allow_fb_modifiers when a non-empty list of
format modifiers is passed at plane init.
Reviewed-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarPaul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190104085610.5829-1-paul.kocialkowski@bootlin.comSigned-off-by: default avatarSasha Levin <sashal@kernel.org>
      0cab1159
    • Axel Lin's avatar
      regulator: act8865: Fix act8600_sudcdc_voltage_ranges setting · 8fbaad2c
      Axel Lin authored 
      [ Upstream commit f01a7beb ]

The act8600_sudcdc_voltage_ranges setting does not match the datasheet.

The problems in below entry:
  REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000),

1. The off-by-one min_sel causes wrong volatage calculation.
   The min_sel should be 192.
2. According to the datasheet[1] Table 7. (on page 43):
   The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V.

Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM.

[1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf

Fixes: df3a950e ("regulator: act8865: Add act8600 support")
Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8fbaad2c
    • Pawe? Chmiel's avatar
      media: s5p-jpeg: Check for fmt_ver_flag when doing fmt enumeration · 644bdba7
      Pawe? Chmiel authored 
      [ Upstream commit 49710c32 ]

Previously when doing format enumeration, it was returning all
 formats supported by driver, even if they're not supported by hw.
Add missing check for fmt_ver_flag, so it'll be fixed and only those
 supported by hw will be returned. Similar thing is already done
 in s5p_jpeg_find_format.

It was found by using v4l2-compliance tool and checking result
 of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test
and using v4l2-ctl to get list of all supported formats.

Tested on s5pv210-galaxys (Samsung i9000 phone).

Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver")
Signed-off-by: default avatarPawe? Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: default avatarJacek Anaszewski <jacek.anaszewski@gmail.com>
[hverkuil-cisco@xs4all.nl: fix a few alignment issues]
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      644bdba7
    • Florian Westphal's avatar
      netfilter: physdev: relax br_netfilter dependency · 2230f5e2
      Florian Westphal authored 
      [ Upstream commit 8e2f311a ]

Following command:
  iptables -D FORWARD -m physdev ...
causes connectivity loss in some setups.

Reason is that iptables userspace will probe kernel for the module revision
of the physdev patch, and physdev has an artificial dependency on
br_netfilter (xt_physdev use makes no sense unless a br_netfilter module
is loaded).

This causes the "phydev" module to be loaded, which in turn enables the
"call-iptables" infrastructure.

bridged packets might then get dropped by the iptables ruleset.

The better fix would be to change the "call-iptables" defaults to 0 and
enforce explicit setting to 1, but that breaks backwards compatibility.

This does the next best thing: add a request_module call to checkentry.
This was a stray '-D ... -m physdev' won't activate br_netfilter
anymore.
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Signed-off-by: default avatarPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2230f5e2
    • Shunyong Yang's avatar
      dmaengine: qcom_hidma: initialize tx flags in hidma_prep_dma_* · 0999f638
      Shunyong Yang authored 
      [ Upstream commit 875aac8a ]

In async_tx_test_ack(), it uses flags in struct dma_async_tx_descriptor
to check the ACK status. As hidma reuses the descriptor in a free list
when hidma_prep_dma_*(memcpy/memset) is called, the flag will keep ACKed
if the descriptor has been used before. This will cause a BUG_ON in
async_tx_quiesce().

  kernel BUG at crypto/async_tx/async_tx.c:282!
  Internal error: Oops - BUG: 0 1 SMP
  ...
  task: ffff8017dd3ec000 task.stack: ffff8017dd3e8000
  PC is at async_tx_quiesce+0x54/0x78 [async_tx]
  LR is at async_trigger_callback+0x98/0x110 [async_tx]

This patch initializes flags in dma_async_tx_descriptor by the flags
passed from the caller when hidma_prep_dma_*(memcpy/memset) is called.

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: default avatarSinan Kaya <okaya@kernel.org>
Signed-off-by: default avatarShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      0999f638
    • Shunyong Yang's avatar
      dmaengine: qcom_hidma: assign channel cookie correctly · c67ed493
      Shunyong Yang authored 
      [ Upstream commit 546c0547 ]

When dma_cookie_complete() is called in hidma_process_completed(),
dma_cookie_status() will return DMA_COMPLETE in hidma_tx_status(). Then,
hidma_txn_is_success() will be called to use channel cookie
mchan->last_success to do additional DMA status check. Current code
assigns mchan->last_success after dma_cookie_complete(). This causes
a race condition of dma_cookie_status() returns DMA_COMPLETE before
mchan->last_success is assigned correctly. The race will cause
hidma_tx_status() return DMA_ERROR but the transaction is actually a
success. Moreover, in async_tx case, it will cause a timeout panic
in async_tx_quiesce().

 Kernel panic - not syncing: async_tx_quiesce: DMA error waiting for
 transaction
 ...
 Call trace:
 [<ffff000008089994>] dump_backtrace+0x0/0x1f4
 [<ffff000008089bac>] show_stack+0x24/0x2c
 [<ffff00000891e198>] dump_stack+0x84/0xa8
 [<ffff0000080da544>] panic+0x12c/0x29c
 [<ffff0000045d0334>] async_tx_quiesce+0xa4/0xc8 [async_tx]
 [<ffff0000045d03c8>] async_trigger_callback+0x70/0x1c0 [async_tx]
 [<ffff0000048b7d74>] raid_run_ops+0x86c/0x1540 [raid456]
 [<ffff0000048bd084>] handle_stripe+0x5e8/0x1c7c [raid456]
 [<ffff0000048be9ec>] handle_active_stripes.isra.45+0x2d4/0x550 [raid456]
 [<ffff0000048beff4>] raid5d+0x38c/0x5d0 [raid456]
 [<ffff000008736538>] md_thread+0x108/0x168
 [<ffff0000080fb1cc>] kthread+0x10c/0x138
 [<ffff000008084d34>] ret_from_fork+0x10/0x18

Cc: Joey Zheng <yu.zheng@hxt-semitech.com>
Reviewed-by: default avatarSinan Kaya <okaya@kernel.org>
Signed-off-by: default avatarShunyong Yang <shunyong.yang@hxt-semitech.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      c67ed493
    • Anders Roxell's avatar
      dmaengine: imx-dma: fix warning comparison of distinct pointer types · d66f368b
      Anders Roxell authored 
      [ Upstream commit 9227ab56 ]

The warning got introduced by commit 930507c1 ("arm64: add basic
Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning
haven't been seen before since size_t was 'unsigned int' when built on
arm32.

../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’:
../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast
   (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                             ^~
../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’
   (__typecheck(x, y) && __no_side_effects(x, y))
    ^~~~~~~~~~~
../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’
  __builtin_choose_expr(__safe_cmp(x, y), \
                        ^~~~~~~~~~
../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’
 #define min(x, y) __careful_cmp(x, y, <)
                   ^~~~~~~~~~~~~
../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’
  now = min(d->len, sg_dma_len(sg));
        ^~~

Rework so that we use min_t and pass in the size_t that returns the
minimum of two values, using the specified type.
Signed-off-by: default avatarAnders Roxell <anders.roxell@linaro.org>
Acked-by: default avatarOlof Johansson <olof@lixom.net>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Signed-off-by: default avatarVinod Koul <vkoul@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d66f368b
    • Valentin Schneider's avatar
      cpu/hotplug: Mute hotplug lockdep during init · 2ae0dd16
      Valentin Schneider authored 
      [ Upstream commit ce48c457 ]

Since we've had:

  commit cb538267 ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations")

we've been getting some lockdep warnings during init, such as on HiKey960:

[    0.820495] WARNING: CPU: 4 PID: 0 at kernel/cpu.c:316 lockdep_assert_cpus_held+0x3c/0x48
[    0.820498] Modules linked in:
[    0.820509] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G S                4.20.0-rc5-00051-g4cae42a #34
[    0.820511] Hardware name: HiKey960 (DT)
[    0.820516] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.820520] pc : lockdep_assert_cpus_held+0x3c/0x48
[    0.820523] lr : lockdep_assert_cpus_held+0x38/0x48
[    0.820526] sp : ffff00000a9cbe50
[    0.820528] x29: ffff00000a9cbe50 x28: 0000000000000000
[    0.820533] x27: 00008000b69e5000 x26: ffff8000bff4cfe0
[    0.820537] x25: ffff000008ba69e0 x24: 0000000000000001
[    0.820541] x23: ffff000008fce000 x22: ffff000008ba70c8
[    0.820545] x21: 0000000000000001 x20: 0000000000000003
[    0.820548] x19: ffff00000a35d628 x18: ffffffffffffffff
[    0.820552] x17: 0000000000000000 x16: 0000000000000000
[    0.820556] x15: ffff00000958f848 x14: 455f3052464d4d34
[    0.820559] x13: 00000000769dde98 x12: ffff8000bf3f65a8
[    0.820564] x11: 0000000000000000 x10: ffff00000958f848
[    0.820567] x9 : ffff000009592000 x8 : ffff00000958f848
[    0.820571] x7 : ffff00000818ffa0 x6 : 0000000000000000
[    0.820574] x5 : 0000000000000000 x4 : 0000000000000001
[    0.820578] x3 : 0000000000000000 x2 : 0000000000000001
[    0.820582] x1 : 00000000ffffffff x0 : 0000000000000000
[    0.820587] Call trace:
[    0.820591]  lockdep_assert_cpus_held+0x3c/0x48
[    0.820598]  static_key_enable_cpuslocked+0x28/0xd0
[    0.820606]  arch_timer_check_ool_workaround+0xe8/0x228
[    0.820610]  arch_timer_starting_cpu+0xe4/0x2d8
[    0.820615]  cpuhp_invoke_callback+0xe8/0xd08
[    0.820619]  notify_cpu_starting+0x80/0xb8
[    0.820625]  secondary_start_kernel+0x118/0x1d0

We've also had a similar warning in sched_init_smp() for every
asymmetric system that would enable the sched_asym_cpucapacity static
key, although that was singled out in:

  commit 40fa3780 ("sched/core: Take the hotplug lock in sched_init_smp()")

Those warnings are actually harmless, since we cannot have hotplug
operations at the time they appear. Instead of starting to sprinkle
useless hotplug lock operations in the init codepaths, mute the
warnings until they start warning about real problems.
Suggested-by: default avatarPeter Zijlstra <peterz@infradead.org>
Signed-off-by: default avatarValentin Schneider <valentin.schneider@arm.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: cai@gmx.us
Cc: daniel.lezcano@linaro.org
Cc: dietmar.eggemann@arm.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: longman@redhat.com
Cc: marc.zyngier@arm.com
Cc: mark.rutland@arm.com
Link: https://lkml.kernel.org/r/1545243796-23224-2-git-send-email-valentin.schneider@arm.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      2ae0dd16
    • Buland Singh's avatar
      hpet: Fix missing '=' character in the __setup() code of hpet_mmap_enable · 96fc367d
      Buland Singh authored 
      [ Upstream commit 24d48a61 ]

Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.

Before this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.204152] HPET mmap disabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204192] HPET mmap disabled

After this patch:

dmesg output with the kernel command line parameter hpet_mmap=1

[    0.203945] HPET mmap enabled

dmesg output with the kernel command line parameter hpet_mmap=0

[    0.204652] HPET mmap disabled

Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: default avatarBuland Singh <bsingh@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      96fc367d
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7