- 05 Feb, 2022 10 commits
-
-
Ard Biesheuvel authored
Instead of falling back to C code to deal with the final bit of input that is not a round multiple of the block size, handle this in the asm code, permitting us to use overlapping loads and stores for performance, and implement the 16-byte wide XOR using a single NEON instruction. Since NEON loads and stores have a natural width of 16 bytes, we need to handle inputs of less than 16 bytes in a special way, but this rarely occurs in practice so it does not impact performance. All other input sizes can be consumed directly by the NEON asm code, although it should be noted that the core AES transform can still only process 128 bytes (8 AES blocks) at a time. Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
Instead of falling back to C code to do a memcpy of the output of the last block, handle this in the asm code directly if possible, which is the case if the entire input is longer than 16 bytes. Cc: Nathan Huckleberry <nhuck@google.com> Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Srujana Challa authored
LDWB is getting incorrectly used in HW when CPT_AF_LF()_PTR_CTL[IQB_LDWB]=1 and CPT instruction queue has less than 320 free entries. So, increase HW instruction queue size by 320 and give 320 entries less for SW/NIX RX as a SW workaround. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
Shijith Thotton <sthotton@marvell.com> Signed-off-by:
-
Srujana Challa authored
When CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to LLC/DRAM encounters a fault/poison, a rare case may result in unpredictable data being delivered to a CPT engine. So, this patch adds code to set FLT_DIS as a workaround. Signed-off-by:
-
Srujana Challa authored
When software sets CPT_AF_CTL[RNM_REQ_EN]=1 and RNM in not producing entropy(i.e., RNM_ENTROPY_STATUS[NORMAL_CNT] < 0x40), the first cycle of the response may be lost due to a conditional clocking issue. Due to this, the subsequent random number stream will be corrupted. So, this patch adds support to ensure RNM_ENTROPY_STATUS[NORMAL_CNT] = 0x40 before writing CPT_AF_CTL[RNM_REQ_EN] = 1, as a workaround. Signed-off-by:
-
Dominik Brodowski authored
For two reasons, current_quality may become zero within the rngd kernel thread: (1) The user lowers current_quality to 0 by writing to the sysfs module parameter file (note that increasing the quality from zero is without effect at the moment), or (2) there are two or more hwrng devices registered, and those which provide quality>0 are unregistered, but one with quality==0 remains. If current_quality is 0, the randomness is not trusted and cannot help to increase the entropy count. That will lead to continuous calls to the hwrngd thread and continuous stirring of the input pool with untrusted bits. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Dominik Brodowski authored
In case the user-specified rng device is not working, it is not used; therefore cur_rng_set_by_user must not be set to 1. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
Using rng_buffer in add_early_randomness() may race with rng_dev_read(). Use rng_fillbuf instead, as it is otherwise only used within the kernel by hwrng_fillfn() and therefore never exposed to userspace. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
According to <linux/hw_random.h>, the @max parameter of the ->read callback "is a multiple of 4 and >= 32 bytes". That promise was not kept by add_early_randomness(), which only asked for 16 bytes. As rng_buffer_size() is at least 32, we can simply ask for 32 bytes. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Dominik Brodowski authored
hw-random device drivers depend on the hw-random core being initialized. Make this ordering explicit, also for the case these drivers are built-in. As the core itself depends on misc_register() which is set up at subsys_initcall time, advance the initialization of the core (only) to the fs_initcall() level. Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
- 31 Jan, 2022 27 commits
-
-
Yury Norov authored
padata_do_parallel() calls cpumask_weight() to check if any bit of a given cpumask is set. We can do it more efficiently with cpumask_empty() because cpumask_empty() stops traversing the cpumask as soon as it finds first set bit, while cpumask_weight() counts all bits unconditionally. Signed-off-by:
Yury Norov <yury.norov@gmail.com> Signed-off-by:
-
Tomas Paukrt authored
This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption. Fixes: 2e6d793e ("crypto: mxs-dcp - Use sg_mapping_iter to copy data") Signed-off-by:
Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by:
-
Kai Ye authored
The kernel test rebot report this warning: Uninitialized variable: ret. The code flow may return value of ret directly. This value is an uninitialized variable, here is fix it. Signed-off-by:
Kai Ye <yekai13@huawei.com> Signed-off-by:
-
Kai Ye authored
Use the correct print format. Printing an unsigned int value should use %u instead of %d. Signed-off-by:
-
Kai Ye authored
The CTR counter is 32bit rollover default on the BD. But the NIST standard is 128bit rollover. it cause the testing failed, so need to fix the BD configuration. Signed-off-by:
-
Kai Ye authored
Fix the maximum length of AAD for the CCM mode due to the hardware limited. Signed-off-by:
-
Kai Ye authored
Modify the print of information that might lead to user misunderstanding. Currently only XTS mode need the fallback tfm when using 192bit key. Others algs not need soft fallback tfm. So others algs can return directly. Signed-off-by:
-
Kai Ye authored
Fixup icv(integrity check value) checking enabled wrong on Kunpeng 930 Signed-off-by:
-
Shijith Thotton authored
OcteonTX2 CPT driver will fail to link without devlink support. aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_delete': otx2_cpt_devlink.c:18: undefined reference to `devlink_priv' aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_egrp_create': otx2_cpt_devlink.c:9: undefined reference to `devlink_priv' aarch64-linux-gnu-ld: otx2_cpt_devlink.o: in function `otx2_cpt_dl_uc_info': otx2_cpt_devlink.c:27: undefined reference to `devlink_priv' Fixes: fed8f4d5 ("crypto: octeontx2 - parameters for custom engine groups") Signed-off-by:
-
Ard Biesheuvel authored
The C standard does not support dereferencing pointers that are not aligned with respect to the pointed-to type, and doing so is technically undefined behavior, even if the underlying hardware supports it. This means that conditionally dereferencing such pointers based on whether CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y is not the right thing to do, and actually results in alignment faults on ARM, which are fixed up on a slow path. Instead, we should use the unaligned accessors in such cases: on architectures that don't care about alignment, they will result in identical codegen whereas, e.g., codegen on ARM will avoid doubleword loads and stores but use ordinary ones, which are able to tolerate misalignment. Link: https://lore.kernel.org/linux-crypto/CAHk-=wiKkdYLY0bv+nXrcJz3NH9mAqPAafX7PpW5EwVtxsEu7Q@mail.gmail.com/Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Herbert Xu authored
The function crypto_authenc_decrypt_tail discards its flags argument and always relies on the flags from the original request when starting its sub-request. This is clearly wrong as it may cause the SLEEPABLE flag to be set when it shouldn't. Fixes: 92d95ba9 ("crypto: authenc - Convert to new AEAD interface") Reported-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Eric Biggers authored
The new convention for akcipher_alg::verify makes it unclear which values are the lengths of the signature and digest. Add local variables to make it clearer what is going on. Also rename the digest_size variable in pkcs1pad_sign(), as it is actually the digest *info* size, not the digest size which is different. Signed-off-by:
-
Eric Biggers authored
Before checking whether the expected digest_info is present, we need to check that there are enough bytes remaining. Fixes: a49de377 ("crypto: Add hash param to pkcs1pad") Cc: <stable@vger.kernel.org> # v4.6+ Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Signed-off-by:
-
Eric Biggers authored
RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA key size. RFC8017 specifically requires the verifier to check this (https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2). Commit a49de377 ("crypto: Add hash param to pkcs1pad") changed the kernel to allow longer signatures, but didn't explain this part of the change; it seems to be unrelated to the rest of the commit. Revert this change, since it doesn't appear to be correct. We can be pretty sure that no one is relying on overly-long signatures (which would have to be front-padded with zeroes) being supported, given that they would have been broken since commit c7381b01 ("crypto: akcipher - new verify API for public key algorithms"). Fixes: a49de377 ("crypto: Add hash param to pkcs1pad") Cc: <stable@vger.kernel.org> # v4.6+ Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Suggested-by:
Vitaly Chikunov <vt@altlinux.org> Signed-off-by:
-
Eric Biggers authored
Commit c7381b01 ("crypto: akcipher - new verify API for public key algorithms") changed akcipher_alg::verify to take in both the signature and the actual hash and do the signature verification, rather than just return the hash expected by the signature as was the case before. To do this, it implemented a hack where the signature and hash are concatenated with each other in one scatterlist. Obviously, for this to work correctly, akcipher_alg::verify needs to correctly extract the two items from the scatterlist it is given. Unfortunately, it doesn't correctly extract the hash in the case where the signature is longer than the RSA key size, as it assumes that the signature's length is equal to the RSA key size. This causes a prefix of the hash, or even the entire hash, to be taken from the *signature*. (Note, the case of a signature longer than the RSA key size should not be allowed in the first place; a separate patch will fix that.) It is unclear whether the resulting scheme has any useful security properties. Fix this by correctly extracting the hash from the scatterlist. Fixes: c7381b01 ("crypto: akcipher - new verify API for public key algorithms") Cc: <stable@vger.kernel.org> # v5.2+ Reviewed-by:
-
Eric Biggers authored
The pkcs1pad template can be instantiated with an arbitrary akcipher algorithm, which doesn't make sense; it is specifically an RSA padding scheme. Make it check that the underlying algorithm really is RSA. Fixes: 3d5b1ecd ("crypto: rsa - RSA padding algorithm") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
-
Giovanni Cabiddu authored
The logic that detects, enables and disables pfvf interrupts was expecting a single CSR per VF. Instead, the source and mask register are two registers with a bit per VF. Due to this, the driver is reading and setting reserved CSRs and not masking the correct source of interrupts. Fix the access to the source and mask register for QAT GEN4 devices by removing the outer loop in adf_gen4_get_vf2pf_sources(), adf_gen4_enable_vf2pf_interrupts() and adf_gen4_disable_vf2pf_interrupts() and changing the helper macros ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK. Fixes: a9dc0d96 ("crypto: qat - add PFVF support to the GEN4 host driver") Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Co-developed-by:
Siming Wan <siming.wan@intel.com> Signed-off-by:
Xin Zeng <xin.zeng@intel.com> Reviewed-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by:
Marco Chiappero <marco.chiappero@intel.com> Signed-off-by:
-
Kevin Bracey authored
It makes no sense to leave crc32_be using the generic code while we only accelerate the little-endian ops. Even though the big-endian form doesn't fit as smoothly into the arm64, we can speed it up and avoid hitting the D cache. Tested on Cortex-A53. Without acceleration: crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 crc32: self tests passed, processed 225944 bytes in 192240 nsec crc32c: CRC_LE_BITS = 64 crc32c: self tests passed, processed 112972 bytes in 21360 nsec With acceleration: crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 crc32: self tests passed, processed 225944 bytes in 53480 nsec crc32c: CRC_LE_BITS = 64 crc32c: self tests passed, processed 112972 bytes in 21480 nsec Signed-off-by:Kevin Bracey <kevin@bracey.fi> Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kevin Bracey authored
crc32c_le self test had a stray multiply by two inherited from the crc32_le+crc32_be test loop. Signed-off-by:
-
Kevin Bracey authored
crc32_le and __crc32c_le can be overridden - extend this to crc32_be. Signed-off-by:
-
Kevin Bracey authored
Casts were added in commit 8f243af4 ("sections: fix const sections for crc32 table") to cope with the tables not being const. They are no longer required since commit f5e38b92 ("lib: crc32: constify crc32 lookup table"). Signed-off-by:
-
Herbert Xu authored
In addition to sha256 we must also enable hmac for the kdf self-test to work. Reported-by:
kernel test robot <oliver.sang@intel.com> Fixes: 304b4ace ("crypto: kdf - select SHA-256 required...") Fixes: 026a733e ("crypto: kdf - add SP800-108 counter key...") Signed-off-by:
-
Corentin Labbe authored
When adding hashes support to sun8i-ss, I have added them only on A83T. But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but with an incorrect ID. Anyway, even with correct IDs, hashes do not work on A80 and I cannot find why. So let's disable all of them on A80. Fixes: d9b45418 ("crypto: sun8i-ss - support hash algorithms") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Nathan Huckleberry authored
Use SPDX-License-Identifier instead of a verbose license text and update external link. Cc: James Guilford <james.guilford@intel.com> Cc: Sean Gulley <sean.m.gulley@intel.com> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
-
Herbert Xu authored
As testmgr is part of cryptomgr which was designed to be unloadable as a module, it shouldn't export any symbols for other crypto modules to use as that would prevent it from being unloaded. All its functionality is meant to be accessed through notifiers. The symbol crypto_simd_disabled_for_test was added to testmgr which caused it to be pinned as a module if its users were also loaded. This patch moves it out of testmgr and into crypto/algapi.c so cryptomgr can again be unloaded and replaced on demand. Signed-off-by:
-
Geert Uytterhoeven authored
The Cavium ThunderX Random Number Generator is only present on Cavium ThunderX SoCs, and not available as an independent PCIe endpoint. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder SoC support. Fixes: cc2f1908 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Minghao Chi authored
Return value from ccp_crypto_enqueue_request() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
-
- 28 Jan, 2022 3 commits
-
-
Dan Carpenter authored
The "ret" variable needs to be signed or there is an error message which will not be printed correctly. Fixes: 0cec19c7 ("crypto: qat - add support for compression for 4xxx") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Peter Gonda authored
Initialize psp_ret inside of __sev_platform_init_locked() because there are many failure paths with PSP initialization that do not set __sev_do_cmd_locked(). Fixes: e423b9d7: ("crypto: ccp - Move SEV_INIT retry for corrupted data") Signed-off-by:
Peter Gonda <pgonda@google.com> Reported-by:
-
Tianjia Zhang authored
tcrypt supports testing of SM3 hash algorithms that use AVX instruction acceleration. In order to add the sm3 asynchronous test to the appropriate position, shift the testcase sequence number of the multi buffer backward and start from 450. Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
