- 08 Jun, 2018 40 commits
-
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 49ee23b7 ] The s3c24xx_serial_ports[] array is indexed using a value derived from the "serialN" alias in DT, or from an incrementing probe index, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_SAMSUNG_UARTS), so this can even be triggered using a legitimate DTB or legitimate board code. Fixes: 13a9f6c6 ("serial: samsung: Consider DT alias when probing ports") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e7d75e18 ] The cdns_uart_port[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: 928e9263 ("tty: xuartps: Initialize ports according to aliases") Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 347876ad ] The shifting of buf[5] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. If the top bit of buf[5] is set then all then all the upper bits sec end up as also being set because of the sign-extension. Fix this by casting buf[5] to an unsigned long before the shift. Detected by CoverityScan, CID#1465292 ("Unintended sign extension") Fixes: 0e149233 ("rtc: add rtc-tx4939 driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e1a74185 ] Currently the allocation of priv->oldaddr is not null checked which will lead to subsequent errors when accessing priv->oldaddr. Fix this with a null pointer check and a return of -ENOMEM on allocation failure. Detected with Coccinelle: drivers/staging/rtl8192u/r8192U_core.c:1708:2-15: alloc with no test, possible model on line 1723 Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
-
lionel.debieve@st.com authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 326ed382 ] Avoid issue when probing the RNG without reset if bad status has been detected previously Signed-off-by:
Lionel Debieve <lionel.debieve@st.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Govindarajulu Varadarajan authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit e8588e26 ] rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Shawn Lin authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 4bf59902 ] The MMC sample and drv clock for rockchip platforms are derived from the bus clock output to the MMC/SDIO card. So it should never happens that the clk rate is zero given it should inherits the clock rate from its parent. If something goes wrong and makes the clock rate to be zero, the calculation would be wrong but may still make the mmc tuning process work luckily. However it makes people harder to debug when the following data transfer is unstable. Signed-off-by:
Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Brad Love authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit c7c7e8d7 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by:
Brad Love <brad@nextdimension.cc> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Qi Hou authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a3ca8312 ] When booting up with "threadirqs" in command line, all irq handlers of the DMA controller pl330 will be threaded forcedly. These threads will race for the same list, pl330->req_done. Before the callback, the spinlock was released. And after it, the spinlock was taken. This opened an race window where another threaded irq handler could steal the spinlock and be permitted to delete entries of the list, pl330->req_done. If the later deleted an entry that was still referred to by the former, there would be a kernel panic when the former was scheduled and tried to get the next sibling of the deleted entry. The scenario could be depicted as below: Thread: T1 pl330->req_done Thread: T2 | | | | -A-B-C-D- | Locked | | | | Waiting Del A | | | -B-C-D- | Unlocked | | | | Locked Waiting | | | | Del B | | | | -C-D- Unlocked Waiting | | | Locked | get C via B \ - Kernel panic The kernel panic looked like as below: Unable to handle kernel paging request at virtual address dead000000000108 pgd = ffffff8008c9e000 [dead000000000108] *pgd=000000027fffe003, *pud=000000027fffe003, *pmd=0000000000000000 Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 85 Comm: irq/59-66330000 Not tainted 4.8.24-WR9.0.0.12_standard #2 Hardware name: Broadcom NS2 SVK (DT) task: ffffffc1f5cc3c00 task.stack: ffffffc1f5ce0000 PC is at pl330_irq_handler+0x27c/0x390 LR is at pl330_irq_handler+0x2a8/0x390 pc : [<ffffff80084cb694>] lr : [<ffffff80084cb6c0>] pstate: 800001c5 sp : ffffffc1f5ce3d00 x29: ffffffc1f5ce3d00 x28: 0000000000000140 x27: ffffffc1f5c530b0 x26: dead000000000100 x25: dead000000000200 x24: 0000000000418958 x23: 0000000000000001 x22: ffffffc1f5ccd668 x21: ffffffc1f5ccd590 x20: ffffffc1f5ccd418 x19: dead000000000060 x18: 0000000000000001 x17: 0000000000000007 x16: 0000000000000001 x15: ffffffffffffffff x14: ffffffffffffffff x13: ffffffffffffffff x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000840 x9 : ffffffc1f5ce0000 x8 : ffffffc1f5cc3338 x7 : ffffff8008ce2020 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : dead000000000200 x2 : dead000000000100 x1 : 0000000000000140 x0 : ffffffc1f5ccd590 Process irq/59-66330000 (pid: 85, stack limit = 0xffffffc1f5ce0020) Stack: (0xffffffc1f5ce3d00 to 0xffffffc1f5ce4000) 3d00: ffffffc1f5ce3d80 ffffff80080f09d0 ffffffc1f5ca0c00 ffffffc1f6f7c600 3d20: ffffffc1f5ce0000 ffffffc1f6f7c600 ffffffc1f5ca0c00 ffffff80080f0998 3d40: ffffffc1f5ce0000 ffffff80080f0000 0000000000000000 0000000000000000 3d60: ffffff8008ce202c ffffff8008ce2020 ffffffc1f5ccd668 ffffffc1f5c530b0 3d80: ffffffc1f5ce3db0 ffffff80080f0d70 ffffffc1f5ca0c40 0000000000000001 3da0: ffffffc1f5ce0000 ffffff80080f0cfc ffffffc1f5ce3e20 ffffff80080bf4f8 3dc0: ffffffc1f5ca0c80 ffffff8008bf3798 ffffff8008955528 ffffffc1f5ca0c00 3de0: ffffff80080f0c30 0000000000000000 0000000000000000 0000000000000000 3e00: 0000000000000000 0000000000000000 0000000000000000 ffffff80080f0b68 3e20: 0000000000000000 ffffff8008083690 ffffff80080bf420 ffffffc1f5ca0c80 3e40: 0000000000000000 0000000000000000 0000000000000000 ffffff80080cb648 3e60: ffffff8008b1c780 0000000000000000 0000000000000000 ffffffc1f5ca0c00 3e80: ffffffc100000000 ffffff8000000000 ffffffc1f5ce3e90 ffffffc1f5ce3e90 3ea0: 0000000000000000 ffffff8000000000 ffffffc1f5ce3eb0 ffffffc1f5ce3eb0 3ec0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3ee0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f00: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f40: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3f80: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fa0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 3fc0: 0000000000000000 0000000000000005 0000000000000000 0000000000000000 3fe0: 0000000000000000 0000000000000000 0000000275ce3ff0 0000000275ce3ff8 Call trace: Exception stack(0xffffffc1f5ce3b30 to 0xffffffc1f5ce3c60) 3b20: dead000000000060 0000008000000000 3b40: ffffffc1f5ce3d00 ffffff80084cb694 0000000000000008 0000000000000e88 3b60: ffffffc1f5ce3bb0 ffffff80080dac68 ffffffc1f5ce3b90 ffffff8008826fe4 3b80: 00000000000001c0 00000000000001c0 ffffffc1f5ce3bb0 ffffff800848dfcc 3ba0: 0000000000020000 ffffff8008b15ae4 ffffffc1f5ce3c00 ffffff800808f000 3bc0: 0000000000000010 ffffff80088377f0 ffffffc1f5ccd590 0000000000000140 3be0: dead000000000100 dead000000000200 0000000000000001 0000000000000000 3c00: 0000000000000000 ffffff8008ce2020 ffffffc1f5cc3338 ffffffc1f5ce0000 3c20: 0000000000000840 0000000000000001 0000000000000000 ffffffffffffffff 3c40: ffffffffffffffff ffffffffffffffff 0000000000000001 0000000000000007 [<ffffff80084cb694>] pl330_irq_handler+0x27c/0x390 [<ffffff80080f09d0>] irq_forced_thread_fn+0x38/0x88 [<ffffff80080f0d70>] irq_thread+0x140/0x200 [<ffffff80080bf4f8>] kthread+0xd8/0xf0 [<ffffff8008083690>] ret_from_fork+0x10/0x40 Code: f2a00838 f9405763 aa1c03e1 aa1503e0 (f9000443) ---[ end trace f50005726d31199c ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0-1 Kernel Offset: disabled Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt To fix this, re-start with the list-head after dropping the lock then re-takeing it. Reviewed-by:
Frank Mori Hess <fmh6jj@gmail.com> Tested-by:
Qi Hou <qi.hou@windriver.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a398e043 ] While experimenting with older compiler versions, I ran into a warning that no longer shows up on gcc-4.8 or newer: drivers/media/platform/s3c-camif/camif-capture.c: In function '__camif_subdev_try_format': drivers/media/platform/s3c-camif/camif-capture.c:1265:25: error: array subscript is below array bounds This is an off-by-one bug, leading to an access before the start of the array, while newer compilers silently assume this undefined behavior cannot happen and leave the loop at index 0 if no other entry matches. As Sylvester explains, we actually need to ensure that the value is within the range, so this reworks the loop to be easier to parse correctly, and an additional check to fall back on the first format value for any unexpected input. I found an existing gcc bug for it and added a reduced version of the function there. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69249#c3 Fixes: babde1c2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Brad Love authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 5ceade1d ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by:
-
Brad Love authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 779c79d4 ] Hauppauge produced a revision of ImpactVCBe using an 888, with a 25MHz crystal, instead of using the default third overtone 50Mhz crystal. This overrides that frequency so that the cx25840 is properly configured. Without the proper crystal setup the cx25840 cannot load the firmware or decode video. Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 2e2c177c ] In slave_update() of vmaster code ignores the error from the slave get() callback and copies the values. It's not only about the missing error code but also that this may potentially lead to a leak of uninitialized variables when the slave get() don't clear them. This patch fixes slave_update() not to copy the potentially uninitialized values when an error is returned from the slave get() callback, and to propagate the error value properly. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ivan Gorinov authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 0a5169ad ] IRQ parameters for the SoC devices connected directly to I/O APIC lines (without PCI IRQ routing) may be specified in the Device Tree. Called from DT IRQ parser, irq_create_fwspec_mapping() calls irq_domain_alloc_irqs() with a pointer to irq_fwspec structure as @arg. But x86-specific DT IRQ allocation code casts @arg to of_phandle_args structure pointer and crashes trying to read the IRQ parameters. The function was not converted when the mapping descriptor was changed to irq_fwspec in the generic irqdomain code. Fixes: 11e4438e ("irqdomain: Introduce a firmware-specific IRQ specifier structure") Signed-off-by:
Ivan Gorinov <ivan.gorinov@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/a234dee27ea60ce76141872da0d6bdb378b2a9ee.1520450752.git.ivan.gorinov@intel.comSigned-off-by:
-
Ivan Gorinov authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 628df9dc ] Commit 08d53aa5 added CRC32 calculation in early_init_dt_verify() and checking in late initcall of_fdt_raw_init(), making early_init_dt_verify() mandatory. The required call to early_init_dt_verify() was not added to the x86-specific implementation, causing failure to create the sysfs entry in of_fdt_raw_init(). Fixes: 08d53aa5 ("of/fdt: export fdt blob as /sys/firmware/fdt") Signed-off-by:
-
Chris Dickens authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 5d6ae4f0 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by:
Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit ac87e560 ] Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Andreas Gruenbacher authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 174d1232 ] The chunk size of allocations in __gfs2_fallocate is calculated incorrectly. The size can collapse, causing __gfs2_fallocate to allocate one block at a time, which is very inefficient. This needs fixing in two places: In gfs2_quota_lock_check, always set ap->allowed to UINT_MAX to indicate that there is no quota limit. This fixes callers that rely on ap->allowed to be set even when quotas are off. In __gfs2_fallocate, reset max_blks to UINT_MAX in each iteration of the loop to make sure that allocation limits from one resource group won't spill over into another resource group. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
-
Maurizio Lombardi authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 2bbea6e1 ] when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit ecb29abd ] A negative page register value means that no page needs to be selected. This is used by status register read operations and needs to be accepted. The failure to do so so results in missed status and limit registers. Fixes: da8e48ab ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a46f8cd6 ] A negative page register value means that no page needs to be selected. This is used by status register evaluations and needs to be accepted. Fixes: da8e48ab ("hwmon: (pmbus) Always call _pmbus_read_byte in core driver") Signed-off-by:
-
Peter Zijlstra authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 9e5b127d ] Mark reported his arm64 perf fuzzer runs sometimes splat like: armv8pmu_read_counter+0x1e8/0x2d8 armpmu_event_update+0x8c/0x188 armpmu_read+0xc/0x18 perf_output_read+0x550/0x11e8 perf_event_read_event+0x1d0/0x248 perf_event_exit_task+0x468/0xbb8 do_exit+0x690/0x1310 do_group_exit+0xd0/0x2b0 get_signal+0x2e8/0x17a8 do_signal+0x144/0x4f8 do_notify_resume+0x148/0x1e8 work_pending+0x8/0x14 which asserts that we only call pmu::read() on ACTIVE events. The above callchain does: perf_event_exit_task() perf_event_exit_task_context() task_ctx_sched_out() // INACTIVE perf_event_exit_event() perf_event_set_state(EXIT) // EXIT sync_child_event() perf_event_read_event() perf_output_read() perf_output_read_group() leader->pmu->read() Which results in doing a pmu::read() on an !ACTIVE event. I _think_ this is 'new' since we added attr.inherit_stat, which added the perf_event_read_event() to the exit path, without that perf_event_read_output() would only trigger from samples and for @event to trigger a sample, it's leader _must_ be ACTIVE too. Still, adding this check makes it consistent with the @sub case for the siblings. Reported-and-Tested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ranjani Sridharan authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit bde8b388 ] This patch adds the change required to create the TLV data for dapm widget kcontrols from topology. This also fixes the following TLV read error shown in amixer while showing the card control contents. "amixer: Control hw:1 element TLV read error: No such device or address" Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mathieu Malaterre authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit f5246862 ] In commit 4f8b50bb ("irq_work, ppc: Fix up arch hooks") a new function arch_irq_work_raise() was added without a prototype in header irq_work.h. Fix the following warning (treated as error in W=1): arch/powerpc/kernel/time.c:523:6: error: no previous prototype for ‘arch_irq_work_raise’ Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Lars-Peter Clausen authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 4058ebf3 ] When using a AIO read() operation on the function FS gadget driver a URB is submitted asynchronously and on URB completion the received data is copied to the userspace buffer associated with the read operation. This is done from a kernel worker thread invoking copy_to_user() (through copy_to_iter()). And while the user space process memory is made available to the kernel thread using use_mm(), some architecture require in addition to this that the operation runs with USER_DS set. Otherwise the userspace memory access will fail. For example on ARM64 with Privileged Access Never (PAN) and User Access Override (UAO) enabled the following crash occurs. Internal error: Accessing user space memory with fs=KERNEL_DS: 9600004f [#1] SMP Modules linked in: CPU: 2 PID: 1636 Comm: kworker/2:1 Not tainted 4.9.0-04081-g8ab2dfb-dirty #487 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) Workqueue: events ffs_user_copy_worker task: ffffffc87afc8080 task.stack: ffffffc87a00c000 PC is at __arch_copy_to_user+0x190/0x220 LR is at copy_to_iter+0x78/0x3c8 [...] [<ffffff800847b790>] __arch_copy_to_user+0x190/0x220 [<ffffff80086f25d8>] ffs_user_copy_worker+0x70/0x130 [<ffffff80080b8c64>] process_one_work+0x1dc/0x460 [<ffffff80080b8f38>] worker_thread+0x50/0x4b0 [<ffffff80080bf5a0>] kthread+0xd8/0xf0 [<ffffff8008083680>] ret_from_fork+0x10/0x50 Address this by placing a set_fs(USER_DS) before of the copy operation and revert it again once the copy operation has finished. This patch is analogous to commit d7ffde35 ("vhost: use USER_DS in vhost_worker thread") which addresses the same underlying issue. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 946ef68a ] Some UDC drivers (like the DWC3) expect that the response to a setup() request is queued from within the setup function itself so that it is available as soon as setup() has completed. Upon receiving a setup request the function fs driver creates an event that is made available to userspace. And only once userspace has acknowledged that event the response to the setup request is queued. So it violates the requirement of those UDC drivers and random failures can be observed. This is basically a race condition and if userspace is able to read the event and queue the response fast enough all is good. But if it is not, for example because other processes are currently scheduled to run, the USB host that sent the setup request will observe an error. To avoid this the gadget framework provides the USB_GADGET_DELAYED_STATUS return code. If a setup() callback returns this value the UDC driver is aware that response is not yet available and can uses the appropriate methods to handle this case. Since in the case of function fs the response will never be available when the setup() function returns make sure that this status code is used. This fixed random occasional failures that were previously observed on a DWC3 based system under high system load. Signed-off-by:
-
Grigor Tovmasyan authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 12814a3f ] The maximum value that unsigned char can hold is 255, meanwhile the maximum value of interval is 2^(bIntervalMax-1)=2^15. Signed-off-by:
Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by:
-
Kamlakant Patel authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit f002612b ] This happens when BMC doesn't return any data and the code is trying to print the value of data[2]. Getting following crash: [ 484.728410] Unable to handle kernel NULL pointer dereference at virtual address 00000002 [ 484.736496] pgd = ffff0000094a2000 [ 484.739885] [00000002] *pgd=00000047fcffe003, *pud=00000047fcffd003, *pmd=0000000000000000 [ 484.748158] Internal error: Oops: 96000005 [#1] SMP [...] [ 485.101451] Call trace: [...] [ 485.188473] [<ffff000000a46e68>] msg_done_handler+0x668/0x700 [ipmi_ssif] [ 485.195249] [<ffff000000a456b8>] ipmi_ssif_thread+0x110/0x128 [ipmi_ssif] [ 485.202038] [<ffff0000080f1430>] kthread+0x108/0x138 [ 485.206994] [<ffff0000080838e0>] ret_from_fork+0x10/0x30 [ 485.212294] Code: aa1903e1 aa1803e0 b900227f 95fef6a5 (39400aa3) Adding a check to validate the data len before printing data[2] to fix this issue. Signed-off-by:
Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 5775b843 ] We leave PCI devices not bound to a driver in D0 during runtime suspend. But they may have a parent which is bound and can be transitioned to D3cold at runtime. Once the parent goes to D3cold, the unbound child may go to D3cold as well. When the child goes to D3cold, its internal state, including configuration of BARs, MSI, ASPM, MPS, etc., is lost. One example are recent hybrid graphics laptops which cut power to the discrete GPU when the root port above it goes to ACPI power state D3. Users may provoke this by unbinding the GPU driver and allowing runtime PM on the GPU via sysfs: The PM core will then treat the GPU as "suspended", which in turn allows the root port to runtime suspend, causing the power resources listed in its _PR3 object to be powered off. The GPU's BARs will be uninitialized when a driver later probes it. Another example are hybrid graphics laptops where the GPU itself (rather than the root port) is capable of runtime suspending to D3cold. If the GPU's integrated HDA controller is not bound and the GPU's driver decides to runtime suspend to D3cold, the HDA controller's BARs will be uninitialized when a driver later probes it. Fix by saving and restoring config space over a runtime suspend cycle even if the device is not bound. Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Tested-by: Peter Wu <peter@lekensteyn.nl> # Nvidia Optimus Tested-by: Lukas Wunner <lukas@wunner.de> # MacBook Pro Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [lukas: add commit message, bikeshed code comments for clarity] Signed-off-by:
Lukas Wunner <lukas@wunner.de> Link: https://patchwork.freedesktop.org/patch/msgid/92fb6e6ae2730915eb733c08e2f76c6a313e3860.1520068884.git.lukas@wunner.deSigned-off-by:
-
Mathias Kresin authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 05454c1b ] According to the QCA u-boot source the "PCIE Phase Lock Loop Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the QCA955X and QCA956X at offset 0x10. Since the PCIE PLL config register is only defined for the AR724x fix only this value. The value is wrong since the day it was added and isn't used by any driver yet. Signed-off-by:
Mathias Kresin <dev@kresin.me> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16048/Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit a400efe4 ] set udev->slot_id to zero when disabling and freeing the xhci slot. Prevents usb core from calling xhci with a stale slot id. xHC controller may be reset during resume to recover from some error. All slots are unusable as they are disabled and freed. xhci driver starts slot enumeration again from 1 in the order they are enabled. In the worst case a stale udev->slot_id for one device matches a newly enabled slot_id for a different device, causing us to perform a action on the wrong device. Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Vitaly Kuznetsov authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 0bcc3fb9 ] Devices which use level-triggered interrupts under Windows 2016 with Hyper-V role enabled don't work: Windows disables EOI broadcast in SPIV unconditionally. Our in-kernel IOAPIC implementation emulates an old IOAPIC version which has no EOI register so EOI never happens. The issue was discovered and discussed a while ago: https://www.spinics.net/lists/kvm/msg148098.html While this is a guest OS bug (it should check that IOAPIC has the required capabilities before disabling EOI broadcast) we can workaround it in KVM: advertising DIRECTED_EOI with in-kernel IOAPIC makes little sense anyway. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Gregory CLEMENT authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 31184d8c ] The errata FE-8471889 description has been updated. There is still a timing violation for repeated start. But the errata now states that it was only the case for the Standard mode (100 kHz), in Fast mode (400 kHz) there is no issue. This patch limit the errata fix to the Standard mode. It has been tesed successfully on the clearfog (Aramda 388 based board). Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Seunghun Han authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 97f3c0a4 ] I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.464168] ACPI: Added _OSI(Module Device) >[ 0.467022] ACPI: Added _OSI(Processor Device) >[ 0.469376] ACPI: Added _OSI(3.0 _SCP Extensions) >[ 0.471647] ACPI: Added _OSI(Processor Aggregator Device) >[ 0.477997] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174) >[ 0.482706] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461) >[ 0.487503] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.492136] ACPI Error: Method parse/execution failed [\_SB._INI] (Node ffff88021710a618), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.497683] ACPI: Interpreter enabled >[ 0.499385] ACPI: (supports S0) >[ 0.501151] ACPI: Using IOAPIC for interrupt routing >[ 0.503342] ACPI Error: Null stack entry at ffff880215c0aad8 (20170303/exresop-174) >[ 0.506522] ACPI Exception: AE_AML_INTERNAL, While resolving operands for [opcode_name unavailable] (20170303/dswexec-461) >[ 0.510463] ACPI Error: Method parse/execution failed [\DBG] (Node ffff88021710ab40), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.514477] ACPI Error: Method parse/execution failed [\_PIC] (Node ffff88021710ab18), AE_AML_INTERNAL (20170303/psparse-543) >[ 0.518867] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20170303/bus-991) >[ 0.522384] kmem_cache_destroy Acpi-Operand: Slab cache still has objects >[ 0.524597] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.12.0-rc5 #26 >[ 0.526795] Hardware name: innotek gmb_h virtual_box/virtual_box, BIOS virtual_box 12/01/2006 >[ 0.529668] Call Trace: >[ 0.530811] ? dump_stack+0x5c/0x81 >[ 0.532240] ? kmem_cache_destroy+0x1aa/0x1c0 >[ 0.533905] ? acpi_os_delete_cache+0xa/0x10 >[ 0.535497] ? acpi_ut_delete_caches+0x3f/0x7b >[ 0.537237] ? acpi_terminate+0xa/0x14 >[ 0.538701] ? acpi_init+0x2af/0x34f >[ 0.540008] ? acpi_sleep_proc_init+0x27/0x27 >[ 0.541593] ? do_one_initcall+0x4e/0x1a0 >[ 0.543008] ? kernel_init_freeable+0x19e/0x21f >[ 0.546202] ? rest_init+0x80/0x80 >[ 0.547513] ? kernel_init+0xa/0x100 >[ 0.548817] ? ret_from_fork+0x25/0x30 >[ 0.550587] vgaarb: loaded >[ 0.551716] EDAC MC: Ver: 3.0.0 >[ 0.553744] PCI: Probing PCI hardware >[ 0.555038] PCI host bridge to bus 0000:00 > ... Continue to boot and log is omitted ... I analyzed this memory leak in detail and found acpi_ns_evaluate() function only removes Info->return_object in AE_CTRL_RETURN_VALUE case. But, when errors occur, the status value is not AE_CTRL_RETURN_VALUE, and Info->return_object is also not null. Therefore, this causes acpi operand memory leak. This cache leak causes a security threat because an old kernel (<= 4.9) shows memory locations of kernel functions in stack dump. Some malicious users could use this information to neutralize kernel ASLR. I made a patch to fix ACPI operand cache leak. Signed-off-by:
Seunghun Han <kkamagui@gmail.com> Signed-off-by:
Erik Schmauss <erik.schmauss@intel.com> Signed-off-by:
-
Erik Schmauss authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit b4c0de31 ] This ensures that acpi_ev_fixed_event_detect() does not use fixed_status and and fixed_enable as uninitialized variables. Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit fadd94e0 ] In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", cached_dev_get() is called when creating dc->writeback_thread, and cached_dev_put() is called when exiting dc->writeback_thread. This modification works well unless people detach the bcache device manually by 'echo 1 > /sys/block/bcache<N>/bcache/detach' Because this sysfs interface only calls bch_cached_dev_detach() which wakes up dc->writeback_thread but does not stop it. The reason is, before patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", inside bch_writeback_thread(), if cache is not dirty after writeback, cached_dev_put() will be called here. And in cached_dev_make_request() when a new write request makes cache from clean to dirty, cached_dev_get() will be called there. Since we don't operate dc->count in these locations, refcount d->count cannot be dropped after cache becomes clean, and cached_dev_detach_finish() won't be called to detach bcache device. This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is set inside bch_writeback_thread(). If this bit is set and cache is clean (no existing writeback_keys), break the while-loop, call cached_dev_put() and quit the writeback thread. Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the writeback thread should continue to perform writeback, this is the original design of manually detach. It is safe to do the following check without locking, let me explain why, + if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) && + (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) { If the kenrel thread does not sleep and continue to run due to conditions are not updated in time on the running CPU core, it just consumes more CPU cycles and has no hurt. This should-sleep-but-run is safe here. We just focus on the should-run-but-sleep condition, which means the writeback thread goes to sleep in mistake while it should continue to run. 1, First of all, no matter the writeback thread is hung or not, kthread_stop() from cached_dev_detach_finish() will wake up it and terminate by making kthread_should_stop() return true. And in normal run time, bit on index BCACHE_DEV_DETACHING is always cleared, the condition !test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) is always true and can be ignored as constant value. 2, If one of the following conditions is true, the writeback thread should go to sleep, "!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)" each of them independently controls the writeback thread should sleep or not, let's analyse them one by one. 2.1 condition "!atomic_read(&dc->has_dirty)" If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will call bch_writeback_queue() immediately or call bch_writeback_add() which indirectly calls bch_writeback_queue() too. In bch_writeback_queue(), wake_up_process(dc->writeback_thread) is called. It sets writeback thread's task state to TASK_RUNNING and following an implicit memory barrier, then tries to wake up the writeback thread. In writeback thread, its task state is set to TASK_INTERRUPTIBLE before doing the condition check. If other CPU core sets the TASK_RUNNING state after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread will be scheduled to run very soon because its state is not TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier of wake_up_process() will make sure modification of dc->has_dirty on other CPU core is updated and observed on the CPU core of writeback thread. Therefore the condition check will correctly be false, and continue writeback code without sleeping. 2.2 condition "!dc->writeback_running)" dc->writeback_running can be changed via sysfs file, every time it is modified, a following bch_writeback_queue() is alwasy called. So the change is always observed on the CPU core of writeback thread. If dc->writeback_running is changed from 0 to 1 on other CPU core, this condition check will observe the modification and allow writeback thread to continue to run without sleeping. Now we can see, even without a locking protection, multiple conditions check is safe here, no deadlock or process hang up will happen. I compose a separte patch because that patch "bcache: fix cached_dev->count usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes Reinecke. Also this fix is not trivial and good for a separate patch. Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Cc: Huijun Tang <tang.junhui@zte.com.cn> Signed-off-by:
-
Michael Schmitz authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 55496d3f ] The generic DMA API uses dev->dma_mask to check the DMA addressable memory bitmask, and warns if no mask is set or even allocated. Set z->dev.dma_coherent_mask on Zorro bus scan, and make z->dev.dma_mask to point to z->dev.dma_coherent_mask so device drivers that need DMA have everything set up to avoid warnings from dma_alloc_coherent(). Drivers can still use dma_set_mask_and_coherent() to explicitly set their DMA bit mask. Signed-off-by:
Michael Schmitz <schmitzmic@gmail.com> [geert: Handle Zorro II with 24-bit address space] Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Shawn Lin authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 1f9c63e8 ] It's found that the clock phase output from clk_summary is wrong compared to the actual phase reading from the register. cat /sys/kernel/debug/clk/clk_summary | grep sdio_sample sdio_sample 0 1 0 50000000 0 -22 It exposes an issue that clk core, clk_core_get_phase, always returns the cached core->phase which should be either updated by calling clk_set_phase or directly from the first place the clk was registered. When registering the clk, the core->phase geting from ->get_phase() may return negative value indicating error. This is quite common since the clk's phase may be highly related to its parent chain, but it was temporarily orphan when registered, since its parent chains hadn't be ready at that time, so the clk drivers decide to return error in this case. However, if no clk_set_phase is called or maybe the ->set_phase() isn't even implemented, the core->phase would never be updated. This is wrong, and we should try to update it when all its parent chains are settled down, like the way of updating clock rate for that. But it's not deserved to complicate the code now and just update it anyway when calling clk_core_get_phase, which would be much simple and enough. Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Chunyu Hu authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 55b55abc ] Kmemleak reported the below leak. When cppc_cpufreq_init went into failure path, the cpu mask is not freed. After fix, this report is gone. And to avaoid potential NULL pointer reference, check the cpu value first. unreferenced object 0xffff800fd5ea4880 (size 128): comm "swapper/0", pid 1, jiffies 4294939510 (age 668.680s) hex dump (first 32 bytes): 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 .... ........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffff0000082c4ae4>] __kmalloc_node+0x278/0x634 [<ffff0000088f4a74>] alloc_cpumask_var_node+0x28/0x60 [<ffff0000088f4af0>] zalloc_cpumask_var+0x14/0x1c [<ffff000008d20254>] cppc_cpufreq_init+0xd0/0x19c [<ffff000008083828>] do_one_initcall+0xec/0x15c [<ffff000008cd1018>] kernel_init_freeable+0x1f4/0x2a4 [<ffff0000089099b0>] kernel_init+0x18/0x10c [<ffff000008084d50>] ret_from_fork+0x10/0x18 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Chunyu Hu <chuhu@redhat.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Thinh Nguyen authored
BugLink: https://bugs.launchpad.net/bugs/1775771 [ Upstream commit 0cab8d26 ] Update two GTXFIFOSIZ bit fields for the DWC_usb31 controller. TXFDEP is a 15-bit value instead of 16-bit value, and bit 15 is TXFRAMNUM. The GTXFIFOSIZ register for DWC_usb31 is as follows: +-------+-----------+----------------------------------+ | BITS | Name | Description | +=======+===========+==================================+ | 31:16 | TXFSTADDR | Transmit FIFOn RAM Start Address | | 15 | TXFRAMNUM | Asynchronous/Periodic TXFIFO | | 14:0 | TXFDEP | TXFIFO Depth | +-------+-----------+----------------------------------+ Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
