- 25 Aug, 2019 40 commits
-
-
Anders Roxell authored
commit 3d584a3c upstream. When fall-through warnings was enabled by default, commit d93512ef0f0e ("Makefile: Globally enable fall-through warning"), the following warnings was starting to show up: In file included from ../arch/arm64/include/asm/kvm_emulate.h:19, from ../arch/arm64/kvm/regmap.c:13: ../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’: ../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \ ^~~ ../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’ #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12) ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’ write_sysreg_el1(v, SYS_SPSR); ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:181:2: note: here case KVM_SPSR_ABT: ^~~~ In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/asm-generic/bug.h:18, from ../arch/arm64/include/asm/bug.h:26, from ../include/linux/bug.h:5, from ../include/linux/mmdebug.h:5, from ../include/linux/mm.h:9, from ../arch/arm64/kvm/regmap.c:11: ../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile("msr " __stringify(r) ", %x0" \ ^~~ ../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’ write_sysreg(v, spsr_abt); ^~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:183:2: note: here case KVM_SPSR_UND: ^~~~ Rework to add a 'break;' in the swich-case since it didn't have that, leading to an interresting set of bugs. Cc: stable@vger.kernel.org # v4.17+ Fixes: a8928195 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> [maz: reworked commit message, fixed stable range] Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Qian Cai authored
[ Upstream commit cbedfe11 ] Commit d66acc39 ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39 ("bitops: Optimise get_order()") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: James Y Knight <jyknight@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 7bc36e3c ] Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find: fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Yang Shi authored
[ Upstream commit df9576de ] When running ltp's oom test with kmemleak enabled, the below warning was triggerred since kernel detects __GFP_NOFAIL & ~__GFP_DIRECT_RECLAIM is passed in: WARNING: CPU: 105 PID: 2138 at mm/page_alloc.c:4608 __alloc_pages_nodemask+0x1c31/0x1d50 Modules linked in: loop dax_pmem dax_pmem_core ip_tables x_tables xfs virtio_net net_failover virtio_blk failover ata_generic virtio_pci virtio_ring virtio libata CPU: 105 PID: 2138 Comm: oom01 Not tainted 5.2.0-next-20190710+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__alloc_pages_nodemask+0x1c31/0x1d50 ... kmemleak_alloc+0x4e/0xb0 kmem_cache_alloc+0x2a7/0x3e0 mempool_alloc_slab+0x2d/0x40 mempool_alloc+0x118/0x2b0 bio_alloc_bioset+0x19d/0x350 get_swap_bio+0x80/0x230 __swap_writepage+0x5ff/0xb20 The mempool_alloc_slab() clears __GFP_DIRECT_RECLAIM, however kmemleak has __GFP_NOFAIL set all the time due to d9570ee3 ("kmemleak: allow to coexist with fault injection"). But, it doesn't make any sense to have __GFP_NOFAIL and ~__GFP_DIRECT_RECLAIM specified at the same time. According to the discussion on the mailing list, the commit should be reverted for short term solution. Catalin Marinas would follow up with a better solution for longer term. The failure rate of kmemleak metadata allocation may increase in some circumstances, but this should be expected side effect. Link: http://lkml.kernel.org/r/1563299431-111710-1-git-send-email-yang.shi@linux.alibaba.com Fixes: d9570ee3 ("kmemleak: allow to coexist with fault injection") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Suggested-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Qian Cai <cai@lca.pw> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 1bbbab09 ] Currently the retry counter is not being decremented, leading to a potential infinite spin if the scalar_reads don't change state. Addresses-Coverity: ("Infinite loop") Fixes: 280e54c9 ("drm/exynos: scaler: Reset hardware before starting the operation") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Jeffrey Hugo authored
[ Upstream commit 9ca7ad6c ] add_gpu_components() adds found GPU nodes from the DT to the match list, regardless of the status of the nodes. This is a problem, because if the nodes are disabled, they should not be on the match list because they will not be matched. This prevents display from initing if a GPU node is defined, but it's status is disabled. Fix this by checking the node's status before adding it to the match list. Fixes: dc3ea265 (drm/msm: Drop the gpu binding) Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
Jack Morgenstein authored
[ Upstream commit 770b7d96 ] We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc6 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.orgSigned-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Guy Levi authored
[ Upstream commit e5366d30 ] Driver shouldn't allow to use UMR to register a MR when umr_modify_atomic_disabled is set. Otherwise it will always end up with a failure in the post send flow which sets the UMR WQE to modify atomic access right. Fixes: c8d75a98 ("IB/mlx5: Respect new UMR capabilities") Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Luck, Tony authored
[ Upstream commit 61f25982 ] Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.comSigned-off-by:
-
Qian Cai authored
[ Upstream commit 7d4e2dcf ] GCC throws a warning, arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page': arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used [-Wunused-but-set-variable] pud_t pud; ^~~ because pud_table() is a macro and compiled away. Fix it by making it a static inline function and for pud_sect() as well. Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit ee07b93e ] Prohibit probing on return_address() and subroutines which is called from return_address(), since the it is invoked from trace_hardirqs_off() which is also kprobe blacklisted. Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
-
Qian Cai authored
[ Upstream commit f1d48362 ] GCC throws out this warning on arm64. drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry': drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si' set but not used [-Wunused-but-set-variable] Fix it by making free_screen_info() a static inline function. Acked-by:
-
Stephen Boyd authored
[ Upstream commit e8de12fb ] If the particular version of clang a user has doesn't enable -Werror=unknown-warning-option by default, even though it is the default[1], then make sure to pass the option to the Kconfig cc-option command so that testing options from Kconfig files works properly. Otherwise, depending on the default values setup in the clang toolchain we will silently assume options such as -Wmaybe-uninitialized are supported by clang, when they really aren't. A compilation issue only started happening for me once commit 589834b3 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") was applied on top of commit b303c6df ("kbuild: compute false-positive -Wmaybe-uninitialized cases in Kconfig"). This leads kbuild to try and test for the existence of the -Wmaybe-uninitialized flag with the cc-option command in scripts/Kconfig.include, and it doesn't see an error returned from the option test so it sets the config value to Y. Then the Makefile tries to pass the unknown option on the command line and -Werror=unknown-warning-option catches the invalid option and breaks the build. Before commit 589834b3 ("kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS") the build works fine, but any cc-option test of a warning option in Kconfig files silently evaluates to true, even if the warning option flag isn't supported on clang. Note: This doesn't change cc-option usages in Makefiles because those use a different rule that includes KBUILD_CFLAGS by default (see the __cc-option command in scripts/Kbuild.incluide). The KBUILD_CFLAGS variable already has the -Werror=unknown-warning-option flag set. Thanks to Doug for pointing out the different rule. [1] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option Cc: Peter Smith <peter.smith@linaro.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit cb481993 ] KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given. I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here. Signed-off-by:
-
Miquel Raynal authored
[ Upstream commit 090bb803 ] Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbd ("ata: libahci: allow to use multiple PHYs") Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wang Xiayang authored
[ Upstream commit 929e571c ] Coccinelle reports a path that the array "data" is never initialized. The path skips the checks in the conditional branches when either of callback functions, read_wave_vgprs and read_wave_sgprs, is not registered. Later, the uninitialized "data" array is read in the while-loop below and passed to put_user(). Fix the path by allocating the array with kcalloc(). The patch is simplier than adding a fall-back branch that explicitly calls memset(data, 0, ...). Also it does not need the multiplication 1024*sizeof(*data) as the size parameter for memset() though there is no risk of integer overflow. Signed-off-by:
Wang Xiayang <xywang.sjtu@sjtu.edu.cn> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit e82f04ec ] In qla2x00_alloc_fcport(), fcport is assigned to NULL in the error handling code on line 4880: fcport = NULL; Then fcport is used on lines 4883-4886: INIT_WORK(&fcport->del_work, qla24xx_delete_sess_fn); INIT_WORK(&fcport->reg_work, qla_register_fcport_fn); INIT_LIST_HEAD(&fcport->gnl_entry); INIT_LIST_HEAD(&fcport->list); Thus, possible null-pointer dereferences may occur. To fix these bugs, qla2x00_alloc_fcport() directly returns NULL in the error handling code. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Acked-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Don Brace authored
[ Upstream commit eeebce18 ] Reviewed-by:
Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit a6d155d2 ] The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdb ("Btrfs: do not start a transaction during fiemap") Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit f4cc743a ] If DRM_LVDS_ENCODER=y but CONFIG_DRM_KMS_HELPER=m, build fails: drivers/gpu/drm/bridge/lvds-encoder.o: In function `lvds_encoder_probe': lvds-encoder.c:(.text+0x155): undefined reference to `devm_drm_panel_bridge_add' Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: dbb58bfd ("drm/bridge: Fix lvds-encoder since the panel_bridge rework.") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Kees Cook authored
[ Upstream commit 71d6c505 ] Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99b ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe75951 ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Numfor Mbiziwo-Tiapo authored
[ Upstream commit 20f9781f ] When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6". This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c". In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning. To reproduce this warning, build perf by running: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\ -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\ -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by:
Numfor Mbiziwo-Tiapo <nums@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vince Weaver authored
[ Upstream commit 7622236c ] So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool. First issue found: If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error. Committer note: Added a pr_err() to tell the user why the command failed. Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-airSigned-off-by:
-
Lucas Stach authored
[ Upstream commit 9a446ef0 ] The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't care about the IRQ type itself, but needs to forward the type to the parent IRQ controller, so this one can be configured correctly. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Nianyao Tang authored
[ Upstream commit 34f8eb92 ] In its_vpe_init, when its_alloc_vpe_table fails, we should free vpt_page allocated just before, instead of vpe->vpt_page. Let's fix it. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Nianyao Tang <tangnianyao@huawei.com> Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 09e088a4 ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write: drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning: variable old_state set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit e1f1ae80 ] The module reset code in the Renesas CPG/MSSR driver uses read-modify-write (RMW) operations to write to a Software Reset Register (SRCRn), and simple writes to write to a Software Reset Clearing Register (SRSTCLRn), as was mandated by the R-Car Gen2 and Gen3 Hardware User's Manuals. However, this may cause a race condition when two devices are reset in parallel: if the reset for device A completes in the middle of the RMW operation for device B, device A may be reset again, causing subtle failures (e.g. i2c timeouts): thread A thread B -------- -------- val = SRCRn val |= bit A SRCRn = val delay val = SRCRn (bit A is set) SRSTCLRn = bit A (bit A in SRCRn is cleared) val |= bit B SRCRn = val (bit A and B are set) This can be reproduced on e.g. Salvator-XS using: $ while true; do i2cdump -f -y 4 0x6A b > /dev/null; done & $ while true; do i2cdump -f -y 2 0x10 b > /dev/null; done & i2c-rcar e6510000.i2c: error -110 : 40000002 i2c-rcar e66d8000.i2c: error -110 : 40000002 According to the R-Car Gen3 Hardware Manual Errata for Rev. 0.80 of Feb 28, 2018, reflected in Rev. 1.00 of the R-Car Gen3 Hardware User's Manual, writes to SRCRn do not require read-modify-write cycles. Note that the R-Car Gen2 Hardware User's Manual has not been updated yet, and still says a read-modify-write sequence is required. According to the hardware team, the reset hardware block is the same on both R-Car Gen2 and Gen3, though. Hence fix the issue by replacing the read-modify-write operations on SRCRn by simple writes. Reported-by:
Yao Lihua <Lihua.Yao@desay-svautomotive.com> Fixes: 6197aa65 ("clk: renesas: cpg-mssr: Add support for reset control") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Linh Phung <linh.phung.jy@renesas.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Chunyan Zhang authored
[ Upstream commit c9a67cbb ] Make REGMAP_MMIO selected to avoid undefined reference to regmap symbols. Fixes: d41f59fd ("clk: sprd: Add common infrastructure") Signed-off-by:
Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by:
-
Codrin Ciubotariu authored
[ Upstream commit 1573eebe ] In clk_generated_determine_rate(), if the divisor is greater than GENERATED_MAX_DIV + 1, then the wrong best_rate will be returned. If clk_generated_set_rate() will be called later with this wrong rate, it will return -EINVAL, so the generated clock won't change its value. Do no let the divisor be greater than GENERATED_MAX_DIV + 1. Fixes: 8c7aa632 ("clk: at91: clk-generated: remove useless divisor loop") Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Vincent Chen authored
commit 69703eb9 upstream. Make the __fstate_clean() function correctly set the state of sstatus.FS in pt_regs to SR_FS_CLEAN. Fixes: 7db91e57 ("RISC-V: Task implementation") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Reviewed-by:
Anup Patel <anup@brainfault.org> Reviewed-by:
Christoph Hellwig <hch@lst.de> [paul.walmsley@sifive.com: expanded "Fixes" commit ID] Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by:
-
Florian Westphal authored
commit 3b48300d upstream. ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by: syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com Fixes: 2035f3ff ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Denis Kirjanov authored
commit 224c0497 upstream. get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Oliver Neukum authored
commit 849f5ae3 upstream. The endpoint type should also be checked before a device is accepted. Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Oliver Neukum authored
commit c88090df upstream. The driver should check whether the endpoint it uses has the correct type. Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com Signed-off-by:
-
Hillf Danton authored
commit 6d4472d7 upstream. Undo what we did for opening before releasing the memory slice. Reported-by:
syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hillf Danton authored
commit 9c09b214 upstream. syzbot found the following crash on: HEAD commit: e96407b4 usb-fuzzer: main usb gadget fuzzer driver git tree: https://github.com/google/kasan.git usb-fuzzer console output: https://syzkaller.appspot.com/x/log.txt?x=147ac20c600000 kernel config: https://syzkaller.appspot.com/x/.config?x=792eb47789f57810 dashboard link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e compiler: gcc (GCC) 9.0.0 20181231 (experimental) ================================================================== BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 Read of size 8 at addr ffff8881cf591a08 by task syz-executor.1/26260 CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x6a/0x32c mm/kasan/report.c:351 __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482 kasan_report+0xe/0x12 mm/kasan/common.c:612 __lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753 lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159 hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221 __fput+0x2d7/0x840 fs/file_table.c:280 task_work_run+0x13f/0x1c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x8ef/0x2c50 kernel/exit.c:878 do_group_exit+0x125/0x340 kernel/exit.c:982 get_signal+0x466/0x23d0 kernel/signal.c:2728 do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815 exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath arch/x86/entry/common.c:274 [inline] do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x459829 Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f75b2a6ccf8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 000000000075c078 RCX: 0000000000459829 RDX: 0000000000000000 RSI: 0000000000000080 RDI: 000000000075c078 RBP: 000000000075c070 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000075c07c R13: 00007ffcdfe1023f R14: 00007f75b2a6d9c0 R15: 000000000075c07c Allocated by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc mm/kasan/common.c:487 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:748 [inline] hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Freed by task 104: save_stack+0x1b/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:449 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1470 [inline] slab_free mm/slub.c:3012 [inline] kfree+0xe4/0x2f0 mm/slub.c:3953 hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914 hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882 hid_hw_start drivers/hid/hid-core.c:1981 [inline] hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972 appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308 hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365 usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x650 drivers/base/dd.c:548 driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:882 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2114 usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536 hub_port_connect drivers/usb/core/hub.c:5098 [inline] hub_port_connect_change drivers/usb/core/hub.c:5213 [inline] port_event drivers/usb/core/hub.c:5359 [inline] hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441 process_one_work+0x92b/0x1530 kernel/workqueue.c:2269 worker_thread+0x96/0xe20 kernel/workqueue.c:2415 kthread+0x318/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff8881cf591900 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 264 bytes inside of 512-byte region [ffff8881cf591900, ffff8881cf591b00) The buggy address belongs to the page: page:ffffea00073d6400 refcount:1 mapcount:0 mapping:ffff8881da002500 index:0x0 compound_mapcount: 0 flags: 0x200000000010200(slab|head) raw: 0200000000010200 0000000000000000 0000000100000001 ffff8881da002500 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== In order to avoid opening a disconnected device, we need to check exist again after acquiring the existance lock, and bail out if necessary. Reported-by:
-
Oliver Neukum authored
commit 01ec0a5f upstream. The ioctl handler uses the intfdata of a second interface, which may not be present in a broken or malicious device, hence the intfdata needs to be checked for NULL. [jkosina@suse.cz: fix newly added spurious space] Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com Signed-off-by:
-
Hui Wang authored
commit 401714d9 upstream. We have 3 new lenovo laptops which have conexant codec 0x14f11f86, these 3 laptops also have the noise issue when rebooting, after letting the codec enter D3 before rebooting or poweroff, the noise disappers. Instead of adding a new ID again in the reboot_notify(), let us make this function apply to all conexant codec. In theory make codec enter D3 before rebooting or poweroff is harmless, and I tested this change on a couple of other Lenovo laptops which have different conexant codecs, there is no side effect so far. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 871b9066 upstream. Make codec enter D3 before rebooting or poweroff can fix the noise issue on some laptops. And in theory it is harmless for all codecs to enter D3 before rebooting or poweroff, let us add a generic reboot_notify, then realtek and conexant drivers can call this function. Cc: stable@vger.kernel.org Signed-off-by:
-
Wenwen Wang authored
commit cfef67f0 upstream. In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc(). Then, the pin widgets in 'codec' are parsed. However, if the parsing process fails, 'spec' is not deallocated, leading to a memory leak. To fix the above issue, free 'spec' before returning the error. Fixes: 352f7f91 ("ALSA: hda - Merge Realtek parser code to generic parser") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
-
