- 12 Oct, 2007 40 commits
-
-
Dhaval Giani authored
drivers/scsi/gdth.c: In function ‘gdth_search_dev’: drivers/scsi/gdth.c:646: warning: ‘pci_find_device’ is deprecated (declared at include/linux/pci.h:482) drivers/scsi/gdth.c: In function ‘gdth_init_isa’: drivers/scsi/gdth.c:857: error: ‘gdth_irq_tab’ undeclared (first use in this function) drivers/scsi/gdth.c:857: error: (Each undeclared identifier is reported only once drivers/scsi/gdth.c:857: error: for each function it appears in.) drivers/scsi/gdth.c: In function ‘gdth_copy_internal_data’: drivers/scsi/gdth.c:2362: warning: unused variable ‘sg’ Looking into the code I notice that gdth_irq_tab is not declared with CONFIG_ISA=y and !CONFIG_EISA. The values seem to be same in 2.6.23 (I am not sure why it has been put with #ifdefs in -mm) so I have just modified the #ifdef to take care of CONFIG_ISA as well. Signed-off-by:
Dhaval Giani <dhaval@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Adrian Bunk authored
Since scsi_esp_{,un}register() are EXPORT_SYMBOL'ed, these functions (and the functions they use) can't be __dev{init,exit}. Based on a bug report by Rob Landley. Signed-off-by:Adrian Bunk <bunk@kernel.org> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Boaz Harrosh authored
gdth_execute() will issue an internal, none scsi-standard commands onto __gdth_queuecommand(). Since it is not recommended to set struct scsi_cmnd IO members in llds, gdth now uses internal IO members for IO. In the case of gdth_execute() these members will be set properly. In case the command was issued from scsi-ml (by gdth_queuecommand) they will be set from scsi IO accessors. * define gdth IO accessors and use them throughout the driver. * use an sg-of-one in gdth_execute() and fix gdth_special_cmd() accordingly. * Clean the not use_sg code path and company Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Boaz Harrosh authored
- Cleanup the rest of the scsi_cmnd->SCp members and move them to gdth_cmndinfo: SCp.this_residual => priority SCp.buffers_residual => timeout SCp.Status => status and dma_dir SCp.Message => info SCp.have_data_in => volatile wait_for_completion SCp.sent_command => OpCode SCp.phase => phase - Two more members will be naturally removed in the !use_sg cleanup TODO: What is the meaning of gdth_cmndinfo.phase? (rhetorically) Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Boaz Harrosh authored
- scsi_cmnd and specifically ->SCp of, where heavily abused with internal meaning members and flags. So introduce a new struct gdth_cmndinfo, put it on ->host_scribble and define a gdth_cmnd_priv() accessor to retrieve it from a scsi_cmnd. - The structure now holds two members: internal_command - replaces the IS_GDTH_INTERNAL_CMD() croft. sense_paddr - which was a 64-bit spanning on 2 32-bit members of SCp. More overloaded members from SCp and scsi_cmnd will be moved in a later patch (For easy review). - Split up gdth_queuecommand to an additional internal_function. The later is the one called by gdth_execute(). This will be more evident later in the scsi accessors patch, but it also facilitates in the differentiation between internal_command and external. And the setup of gdth_cmndinfo of each command. Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Boaz Harrosh authored
- Places like Initialization and Reset that Just loop on all devices can use the link list with the list_for_each_entry macro. But the io_ctrl from user mode now suffers performance-wise because code has to do a sequential search for the requested host number. I have isolated this search in a gdth_find_ha(int hanum) member for future enhancement if needed. Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Christoph Hellwig authored
- Use scsi_add_host and friends and track instances ourselves. And generally modernize the driver's structure. - TODO: Next we can remove the controller table - TODO: Fix use of deprecated pci_find_device() Signed-off-by:Christoph Hellwig <hch@lst.de> Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Signed-off-by:
-
Boaz Harrosh authored
- gdth_get_status() returns a single device interrupt IStatus - gdth_interrupt split to __gdth_interrupt() that receives flags if is called from gdth_wait(). - Use dev_id passed from kernel and do not loop on all controllers. - gdth_wait(), get read of all global variables and call the new __gdth_interrupt with these variables on the stack Signed-off-by Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: -
Boaz Harrosh authored
- Based on same patch from Christoph Hellwig <hch@lst.de> - Get rid of all the indirection in the Scsi_Host private data and always put the gdth_ha_str directly into it. - Change all internal functions prototype to recieve an "gdth_ha_str *ha" pointer directlly and kill all that redundent access to the "gdth_ctr_tab[]" controller-table. Signed-off-by: -
Christoph Hellwig authored
The virt_ctr option allows to register a new scsi_host for each bus on the raid controller. This non-default option makes no sense with the current scsi code and prevents cleaning up the host registration, so remove it. Signed-off-by:
-
Jeff Garzik authored
shuffle scsi_host_template members such that they appear in the order in which they are defined in the header. this makes is easier to verify when initializers are missing members. Signed-off-by:
Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Jeff Garzik authored
They are direct equivalents to {read,write}[bwl]. Signed-off-by: -
Jeff Garzik authored
* Remove in-source changelog. It's archived permanently in git and various kernel archives, and changelogs should exist purely in git. * Remove 2.4.x kernel support. It is an active obstacle to modernizing this driver, at this point. This includes killing gdth_kcompat.h which is 100% redundant in modern kernels. Signed-off-by: -
Christoph Hellwig authored
Split out per-device pci probing and put it under proper CONFIG_PCI. Signed-off-by:
-
Christoph Hellwig authored
Split eisa probing into it's own helper, and do proper error unwinding. Protect EISA probind by the proper CONFIG_EISA symbol. Signed-off-by:
-
Christoph Hellwig authored
(note: this is ontop of Jeff's pci cleanup patch) Split out isa probing into a helper of it's own. Error handling is cleaned up, but errors are not propagated yet. Also enclose the isa probe under the proper CONFIG_ISA symbol instead of the !IA64 hack. Signed-off-by:
-
Matthew Wilcox authored
Rather than having internal commands abuse scsi_done to call gdth_scsi_done, have all the places that use to call scsi_done directly call gdth_scsi_done, which now checks whether the command was internal, and calls scsi_done if not. Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Boaz Harrosh authored
- Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation. Signed-off-by: -
Boaz Harrosh authored
- Use new scsi_eh_prep/restor_cmnd() for synchronous REQUEST_SENSE invocation. Signed-off-by:Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Boaz Harrosh authored
- Drivers/transports that want to send a synchronous REQUEST_SENSE command as part of their .queuecommand sequence, have 2 new API's that facilitate in doing so and abstract them from scsi-ml internals. void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *sesci, unsigned char *cmnd, int cmnd_size, int sense_bytes) Will hijack a command and prepare it for request sense if needed. And will save any later needed info into a scsi_eh_save structure. void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *sesci); Will undo any changes done to a command by above function. Making it ready for completion. - Re-factor scsi_send_eh_cmnd() to use above APIs Signed-off-by:
-
Boaz Harrosh authored
- regrouped variables for easier reviewing of next patch - Support of cmnd==NULL in call to scsi_send_eh_cmnd() - In the @sense_bytes case set transfer size to the minimum size of sense_buffer and passed @sense_bytes. cmnd[4] is set accordingly. - REQUEST_SENSE is set into cmnd[0] so if @sense_bytes is not Zero passed @cmnd should be NULL. - Also save/restore resid of failed command. - Adjust caller Signed-off-by: -
Gabriel C authored
I get this warnings on current git when CONFIG_PCI is not set : drivers/scsi/fdomain.c:390: warning: 'PCI_dev' defined but not used drivers/scsi/fdomain.c:1768: warning: 'fdomain_pci_tbl' defined but not used Signed-off-by:
Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joe Korty authored
Fix section mismatch in the Adaptec DPT SCSI Raid driver. WARNING: vmlinux.o(.init.text+0x1fcd2): Section mismatch: reference to .exit.text:adpt_exit (between 'adpt_init' and 'ahc_linux_init') This warning is due to adaptec device detection calling the exit routine on failure to properly register the adaptec device. The exit routine + call was added on July 30 by Commit: 55d9fcf5 Author: Matthew Wilcox Subject: [SCSI] dpt_i2o: convert to SCSI hotplug model. Mathew: isn't a module exit routine a little too strong to be calling on the failure of a single device? Module exit implies that other, non-failing adaptec raid devices will also get shut down. Signed-off-by:
Joe Korty <joe.korty@ccur.com> Signed-off-by:
-
Michael S. Tsirkin authored
scsi/scsi_transport_iscsi.h uses struct mutex and struct list_head, so while linux/mutex.h and linux/list.h seem to be pulled in indirectly by one of the headers it includes, the right thing is to include linux/mutex.h and linus/list.h directly. Signed-off-by:
Michael S. Tsirkin <mst@dev.mellanox.co.il> Acked-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Adrian Bunk authored
The Coverity checker spotted that we have already oops'ed if "cmd" was NULL. Since "cmd" being NULL doesn't seem to be possible at this point this patch removes the NULL check. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
drivers/scsi/arcmsr/arcmsr_hba.c:129: error: 'arcmsr_pci_error_detected' undeclared here (not in a function) drivers/scsi/arcmsr/arcmsr_hba.c:130: error: 'arcmsr_pci_slot_reset' undeclared here (not in a function) Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
-
Robert P. J. Day authored
Remove the useless references to the obsolete MODULE_PARM macro. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Signed-off-by:
-
Matthew Wilcox authored
Change PortAddr to be an unsigned int instead of an unsigned short (IO Port address are 24 bit on parisc). Fix a couple of printk argument warnings. Remove the Kconfig marking as 'BROKEN'. I haven't removed the #warning yet because virt_to_bus/bus_to_virt are only eliminated for narrow boards. Wide boards need more work. Signed-off-by:
-
Matthew Wilcox authored
Convert the call to virt_to_bus() into a call to dma_map_single(). Some architectures may require different DMA addresses for different devices, so allocate one overrun buffer per host rather than one for all cards. Signed-off-by:
-
Matthew Wilcox authored
Replace ASC_VADDR_TO_U32 and ASC_U32_TO_VADDR with an auto-expanding array that maps pointers to 32-bit IDs and back. One of the uses of ASC_VADDR_TO_U32 was in error; it should have been using ADV_VADDR_TO_U32. Also replace the use of virt_to_bus when setting the sense_address with a call to dma_map_single() followed by dma_cache_sync. This part cribbed from the 53c700 driver. Signed-off-by:
-
Matthew Wilcox authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> - convert the statistics to not distinguish between single and sg xfers - replace ASC_CEILING with DIV_ROUND_UP - remove an obsolete comment Signed-off-by:
-
Matthew Wilcox authored
This rather complex function boiled down to calling virt_to_bus(). Also get rid of some obsolete defines and variables that could never vary. Signed-off-by:
-
Matthew Wilcox authored
board->carrp is a duplicate of asc_dvc->carrier_buf, so cut out the middle-man and assign directly to carrier_buf. Move orig_reqp to adv_dvc too, since it's wide-board specific. Also eliminate an unnecessary BUG_ON (we'll never get there with a NULL carrier_buf, and will crash if we do). The bulk of this patch is rearranging structures so everything's declared in the right order. Signed-off-by:
-
Matthew Wilcox authored
It's somewhat neater to make this a pointer to one of two tables than initialising an array in the driver. Also delete the unused AscSynIndexToPeriod and rename host_init_sdtr_index to min_sdtr_index Signed-off-by:
-
Matthew Wilcox authored
It's always a mistake to have your own index of boards; just use the scsi host number. Signed-off-by:
-
Matthew Wilcox authored
The board lock was essentially identical with the host lock. Signed-off-by:
-
Matthew Wilcox authored
Replace ASC_DBG{,1,2,3,4,5} with a single variadic macro ASC_DBG. As suggested by Jeff Garzik, include DRV_NAME and __FUNCTION__ in the output. Change all callers to no longer include the function name in the string. Enabling ADVANSYS_DEBUG to test this feature shows a lot of other problems that need to be fixed: - Reorder asc_prt_* functions now that their prototypes have been removed. - There is no longer a struct device in ASC_DVC_CFG/ADV_DVC_CFG, and it wasn't necessarily a PCI device to begin with. Print the bus_id from asc_board->dev instead. - isr_callback no longer exists. - ASC_DBG_PRT_SCSI_CMND isn't being used, so delete asc_prt_scsi_cmnd too. - A missing semicolon Signed-off-by: -
Matthew Wilcox authored
With the ASC and ADV libraries merged into the driver, there really is no point in reporting their version numbers, or even trying to maintain them. Signed-off-by:
-
Matthew Wilcox authored
asc_board_t was simply a typedef for struct asc_board. ASC_BOARDP() can be replaced by shost_priv() except in the ASC_STATS* macros which rely on the cast; add an explicit cast there. Signed-off-by:
-
