- 12 Jan, 2020 40 commits
-
-
Jose Abreu authored
[ Upstream commit 8d558f02 ] We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a ("stmmac: Move the STMicroelectronics driver") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jose Abreu authored
[ Upstream commit 11d55fd9 ] When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by:
-
Jose Abreu authored
[ Upstream commit eaf4fac4 ] The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a ("stmmac: Move the STMicroelectronics driver") Signed-off-by:
-
Eric Sandeen authored
[ Upstream commit 04646aeb ] Anything that walks all inodes on sb->s_inodes list without rescheduling risks softlockups. Previous efforts were made in 2 functions, see: c27d82f5 fs/drop_caches.c: avoid softlockups in drop_pagecache_sb() ac05fbb4 inode: don't softlockup when evicting inodes but there hasn't been an audit of all walkers, so do that now. This also consistently moves the cond_resched() calls to the bottom of each loop in cases where it already exists. One loop remains: remove_dquot_ref(), because I'm not quite sure how to deal with that one w/o taking the i_lock. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexander Shishkin authored
[ Upstream commit 92ca7da4 ] Commit: ccbebba4 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") skips the PT/LBR exclusivity check on CPUs where PT and LBRs coexist, but also inadvertently skips the active_events bump for PT in that case, which is a bug. If there aren't any hardware events at the same time as PT, the PMI handler will ignore PT PMIs, as active_events reads zero in that case, resulting in the "Uhhuh" spurious NMI warning and PT data loss. Fix this by always increasing active_events for PT events. Fixes: ccbebba4 ("perf/x86/intel/pt: Bypass PT vs. LBR exclusivity if the core supports it") Reported-by:
Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lkml.kernel.org/r/20191210105101.77210-1-alexander.shishkin@linux.intel.comSigned-off-by:
-
Thomas Hebb authored
[ Upstream commit 272a7210 ] NULL expressions are taken to always be true, as implemented by the expr_is_yes() macro and by several other functions in expr.c. As such, they ought to be valid inputs to expr_eq(), which compares two expressions. Signed-off-by:
Thomas Hebb <tommyhebb@gmail.com> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Xiaotao Yin authored
[ Upstream commit 472d26df ] During ethernet(Marvell octeontx2) set ring buffer test: ethtool -G eth1 rx <rx ring size> tx <tx ring size> following kmemleak will happen sometimes: unreferenced object 0xffff000b85421340 (size 64): comm "ethtool", pid 867, jiffies 4295323539 (age 550.500s) hex dump (first 64 bytes): 80 13 42 85 0b 00 ff ff ff ff ff ff ff ff ff ff ..B............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ff ff ff ff ff ff ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000001b204ddf>] kmem_cache_alloc+0x1b0/0x350 [<00000000d9ef2e50>] alloc_iova+0x3c/0x168 [<00000000ea30f99d>] alloc_iova_fast+0x7c/0x2d8 [<00000000b8bb2f1f>] iommu_dma_alloc_iova.isra.0+0x12c/0x138 [<000000002f1a43b5>] __iommu_dma_map+0x8c/0xf8 [<00000000ecde7899>] iommu_dma_map_page+0x98/0xf8 [<0000000082004e59>] otx2_alloc_rbuf+0xf4/0x158 [<000000002b107f6b>] otx2_rq_aura_pool_init+0x110/0x270 [<00000000c3d563c7>] otx2_open+0x15c/0x734 [<00000000a2f5f3a8>] otx2_dev_open+0x3c/0x68 [<00000000456a98b5>] otx2_set_ringparam+0x1ac/0x1d4 [<00000000f2fbb819>] dev_ethtool+0xb84/0x2028 [<0000000069b67c5a>] dev_ioctl+0x248/0x3a0 [<00000000af38663a>] sock_ioctl+0x280/0x638 [<000000002582384c>] do_vfs_ioctl+0x8b0/0xa80 [<000000004e1a2c02>] ksys_ioctl+0x84/0xb8 The reason: When alloc_iova_mem() without initial with Zero, sometimes fpn_lo will equal to IOVA_ANCHOR by chance, so when return with -ENOMEM(iova32_full) from __alloc_and_insert_iova_range(), the new_iova will not be freed in free_iova_mem(). Fixes: bb68b2fb ("iommu/iova: Add rbtree anchor node") Signed-off-by:
Xiaotao Yin <xiaotao.yin@windriver.com> Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Andreas Kemnade authored
[ Upstream commit 62a1923c ] platform device aliases were missing, preventing autoloading of module. Fixes: 811b7006 ("regulator: rn5t618: add driver for Ricoh RN5T618 regulators") Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Link: https://lore.kernel.org/r/20191211221600.29438-1-andreas@kemnade.infoSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Shengjiu Wang authored
[ Upstream commit 556672d7 ] According to user manual, it is required that FLL_LAMBDA > 0 in all cases (Integer and Franctional modes). Fixes: 9a76f1ff ("ASoC: Add initial WM8962 CODEC driver") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 6fc232db ] In rfkill_register, the struct rfkill pointer is first derefernced and then checked for NULL. This patch removes the BUG_ON and returns an error to the caller in case rfkill is NULL. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Link: https://lore.kernel.org/r/20191215153409.21696-1-pakki001@umn.eduSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit aeea5eae ] compilation failed with: MODPOST vmlinux.o WARNING: vmlinux.o(.text.unlikely+0xa0c): Section mismatch in reference from the function walk_lower_bus() to the function .init.text:walk_native_bus() The function walk_lower_bus() references the function __init walk_native_bus(). This is often because walk_lower_bus lacks a __init annotation or the annotation of walk_native_bus is wrong. FATAL: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. make[2]: *** [/home/svens/linux/parisc-linux/src/scripts/Makefile.modpost:64: __modpost] Error 1 make[1]: *** [/home/svens/linux/parisc-linux/src/Makefile:1077: vmlinux] Error 2 make[1]: Leaving directory '/home/svens/linux/parisc-linux/build' make: *** [Makefile:179: sub-make] Error 2 Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Cristian Birsan authored
[ Upstream commit 858ce8ca ] Display the return code as decimal integer. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Vishal Kulkarni authored
[ Upstream commit 479a0d13 ] The sge_info debugfs collects offload queue info even when offload capability is disabled and leads to panic. [ 144.139871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0 [ 144.139876] Call Trace: [ 144.139887] sge_queue_start+0x12/0x30 [cxgb4] [ 144.139897] seq_read+0x1d4/0x3d0 [ 144.139906] full_proxy_read+0x50/0x70 [ 144.139913] vfs_read+0x89/0x140 [ 144.139916] ksys_read+0x55/0xd0 [ 144.139924] do_syscall_64+0x5b/0x1d0 [ 144.139933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 144.139936] RIP: 0033:0x7f4b01493990 Fix this crash by skipping the offload queue access in sge_qinfo when offload capability is disabled Signed-off-by:
Herat Ramani <herat@chelsio.com> Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit ee699f89 ] Driver doesn't calculate total number of PFs configured on a given engine correctly which messed up resources in the PFs loaded on that engine, leading driver to exceed configuration of resources (like vlan filters etc.) beyond the limit per engine, which ended up with asserts from the firmware. Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 7113f796 ] Parity error from the hardware will cause PF to lose the state of their VFs due to PF's internal reload and hardware reset following the parity error. Restrict any configuration request from the VFs after the parity as it could cause unexpected hardware behavior, only way for VFs to recover would be to trigger FLR on VFs and reload them. Signed-off-by:
-
Lorenz Bauer authored
[ Upstream commit 5133498f ] Redirecting a packet from ingress to egress by using bpf_redirect breaks if the egress interface has an fq qdisc installed. This is the same problem as fixed in 'commit 8203e2d8 ("net: clear skb->tstamp in forwarding paths") Clear skb->tstamp when redirecting into the egress path. Fixes: 80b14dee ("net: Add a new socket option for a future transmit time.") Fixes: fb420d5d ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by:
Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/bpf/20191213180817.2510-1-lmb@cloudflare.comSigned-off-by:
-
Nikolay Borisov authored
[ Upstream commit 37d02592 ] The branch of qgroup_rescan_init which is executed from the mount path prints wrong errors messages. The textual print out in case BTRFS_QGROUP_STATUS_FLAG_RESCAN/BTRFS_QGROUP_STATUS_FLAG_ON are not set are transposed. Fix it by exchanging their place. Signed-off-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Mike Rapoport authored
[ Upstream commit 8fabc623 ] Some powerpc platforms (e.g. 85xx) limit DMA-able memory way below 4G. If a system has more physical memory than this limit, the swiotlb buffer is not addressable because it is allocated from memblock using top-down mode. Force memblock to bottom-up mode before calling swiotlb_init() to ensure that the swiotlb buffer is DMA-able. Reported-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191204123524.22919-1-rppt@kernel.orgSigned-off-by:
-
Daniel T. Lee authored
[ Upstream commit fe330089 ] Currently, open() is called from the user program and it calls the syscall 'sys_openat', not the 'sys_open'. This leads to an error of the program of user side, due to the fact that the counter maps are zero since no function such 'sys_open' is called. This commit adds the kernel bpf program which are attached to the tracepoint 'sys_enter_openat' and 'sys_enter_openat'. Fixes: 1da236b6 ("bpf: add a test case for syscalls/sys_{enter|exit}_* tracepoints") Signed-off-by:
Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by:
-
Daniel T. Lee authored
[ Upstream commit bba1b2a8 ] Previously, when this sample is added, commit 1c47910e ("samples/bpf: add perf_event+bpf example"), a symbol 'sys_read' and 'sys_write' has been used without no prefixes. But currently there are no exact symbols with these under kallsyms and this leads to failure. This commit changes exact compare to substring compare to keep compatible with exact symbol or prefixed symbol. Fixes: 1c47910e ("samples/bpf: add perf_event+bpf example") Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit c6b16761 ] The LCD panel on AM4 GP EVMs and ePOS boards seems to be osd070t1718-19ts. The current dts files say osd057T0559-34ts. Possibly the panel has changed since the early EVMs, or there has been a mistake with the panel type. Update the DT files accordingly. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Vignesh Raghavendra authored
[ Upstream commit c52c91bb ] When switching ChipSelect from default CS0 to any other CS, driver fails to update the bits in system control module register that control which CS is mapped for MMIO access. This causes reads to fail when driver tries to access QSPI flash on CS1/2/3. Fix this by updating appropriate bits whenever active CS changes. Reported-by:
Andreas Dannenberg <dannenberg@ti.com> Signed-off-by:
Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20191211155216.30212-1-vigneshr@ti.comSigned-off-by:
-
Paul Chaignon authored
[ Upstream commit e49e6f6d ] All BPF JIT compilers except RISC-V's and MIPS' enforce a 33-tail calls limit at runtime. In addition, a test was recently added, in tailcalls2, to check this limit. This patch updates the tail call limit in MIPS' JIT compiler to allow 33 tail calls. Fixes: b6bd53f9 ("MIPS: Add missing file for eBPF JIT.") Reported-by:
Mahshid Khezri <khezri.mahshid@gmail.com> Signed-off-by:
Paul Chaignon <paul.chaignon@orange.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/b8eb2caac1c25453c539248e56ca22f74b5316af.1575916815.git.paul.chaignon@gmail.comSigned-off-by:
-
Vasundhara Volam authored
[ Upstream commit c74751f4 ] If any change happened in the configuration of VF in VM while collecting live dump, there could be a race and firmware can return more data than allocated dump length. Fix it by keeping track of the accumulated core dump length copied so far and abort the copy with error code if the next chunk of core dump will exceed the original dump length. Fixes: 6c5657d0 ("bnxt_en: Add support for ethtool get dump.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit 30e647a7 ] During definition of the CPU thermal zone of BCM283x SoC family there was a misunderstanding of the meaning "criticial trip point" and the thermal throttling range of the VideoCore firmware. The latter one takes effect when the core temperature is at least 85 degree celsius or higher So the current critical trip point doesn't make sense, because the thermal shutdown appears before the firmware has a chance to throttle the ARM core(s). Fix these unwanted shutdowns by increasing the critical trip point to a value which shouldn't be reached with working thermal throttling. Fixes: 0fe4d218 ("ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point") Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Dragos Tarcatu authored
[ Upstream commit a3039aef ] The return value of soc_tplg_pcm_create() is currently not checked in soc_tplg_pcm_elems_load(). If an error is to occur there, the topology ignores it and continues loading. Fix that by checking the status and rejecting the topology on error. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Chuhong Yuan authored
[ Upstream commit a841e285 ] The driver forgets to call pci_release_regions() in probe failure and remove. Add the missed calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191206075500.18525-1-hslester96@gmail.comSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit fac2c2da ] The MDIO node on Cygnus had an reversed #address-cells and #size-cells properties, correct those. Fixes: 40c26d3a ("ARM: dts: Cygnus: Add the ethernet switch and ethernet PHY") Reported-by:
Simon Horman <simon.horman@netronome.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
-
Masami Hiramatsu authored
[ Upstream commit 5cc6c8d4 ] Fix multiple kprobe event testcase to work it correctly. There are 2 bugfixes. - Since `wc -l FILE` returns not only line number but also FILE filename, following "if" statement always failed. Fix this bug by replacing it with 'cat FILE | wc -l' - Since "while do-done loop" block with pipeline becomes a subshell, $N local variable is not update outside of the loop. Fix this bug by using actual target number (256) instead of $N. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 093c3f94 ] The MDIO node on BCM5301X had an reversed #address-cells and #size-cells properties, correct those, silencing checker warnings: .../linux/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: mdio@18003000: #address-cells:0:0: 1 was expected Reported-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 0d2c96af ] Userspace might bogusly sent NFT_DATA_VERDICT in several netlink attributes that assume NFT_DATA_VALUE. Moreover, make sure that error path invokes nft_data_release() to decrement the reference count on the chain object. Fixes: 96518518 ("netfilter: add nftables") Fixes: 0f3cd9b3 ("netfilter: nf_tables: add range expression") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit bffc124b ] Only NFTA_SET_ELEM_KEY and NFTA_SET_ELEM_FLAGS make sense for elements whose NFT_SET_ELEM_INTERVAL_END flag is set on. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit db3b665d ] The existing rbtree implementation might store consecutive elements where the closing element and the opening element might overlap, eg. [ a, a+1) [ a+1, a+2) This patch removes the optimization for non-anonymous sets in the exact matching case, where it is assumed to stop searching in case that the closing element is found. Instead, invalidate candidate interval and keep looking further in the tree. The lookup/get operation might return false, while there is an element in the rbtree. Moreover, the get operation returns true as if a+2 would be in the tree. This happens with named sets after several set updates. The existing lookup optimization (that only works for the anonymous sets) might not reach the opening [ a+1,... element if the closing ...,a+1) is found in first place when walking over the rbtree. Hence, walking the full tree in that case is needed. This patch fixes the lookup and get operations. Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Fixes: ba0e4d99 ("netfilter: nf_tables: get set elements via netlink") Signed-off-by:
-
Phil Sutter authored
[ Upstream commit 16416655 ] With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by:
Phil Sutter <phil@nwl.cc> Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2a76352a ] Currently we add individual copy of same OPP table for each CPU within the cluster. This is redundant and doesn't reflect the reality. We can't use core cpumask to set policy->cpus in ve_spc_cpufreq_init() anymore as it gets called via cpuhp_cpufreq_online()->cpufreq_online() ->cpufreq_driver->init() and the cpumask gets updated upon CPU hotplug operations. It also may cause issues when the vexpress_spc_cpufreq driver is built as a module. Since ve_spc_clk_init is built-in device initcall, we should be able to use the same topology_core_cpumask to set the opp sharing cpumask via dev_pm_opp_set_sharing_cpus and use the same later in the driver via dev_pm_opp_get_sharing_cpus. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Tested-by:
Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Stefan Roese authored
[ Upstream commit 0aeb1f2b ] Without this "jedec,spi-nor" compatible property, probing of the SPI NOR does not work on the NXP i.MX6ULL EVK. Fix this by adding this compatible property to the DT. Fixes: 7d77b850 ("ARM: dts: imx6ull: fix the imx6ull-14x14-evk configuration") Signed-off-by:
Stefan Roese <sr@denx.de> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Reviewed-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit ff397be6 ] efi_graphics_output_protocol::query_mode() returns info in callee-allocated memory which must be freed by the caller, which we aren't doing. We don't actually need to call query_mode() in order to obtain the info for the current graphics mode, which is already there in gop->mode->info, so just access it directly in the setup_gop32/64() functions. Also nothing uses the size of the info structure, so don't update the passed-in size (which is the size of the gop_handle table in bytes) unnecessarily. Signed-off-by:
Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-5-ardb@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit dbd89c30 ] If we've found a usable instance of the Graphics Output Protocol (GOP) with a framebuffer, it is possible that one of the later EFI calls fails while checking if any support console output. In this case status may be an EFI error code even though we found a usable GOP. Fix this by explicitly return EFI_SUCCESS if a usable GOP has been located. Signed-off-by:
-
Arvind Sankar authored
[ Upstream commit 6fc3cec3 ] If we don't find a usable instance of the Graphics Output Protocol (GOP) because none of them have a framebuffer (i.e. they were all PIXEL_BLT_ONLY), but all the EFI calls succeeded, we will return EFI_SUCCESS even though we didn't find a usable GOP. Fix this by explicitly returning EFI_NOT_FOUND if no usable GOPs are found, allowing the caller to probe for UGA instead. Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 7eccc05c ] When the Teclast X89 quirk was added we did not have jack-detection support yet. Note the over-current detection limit is set to 2mA instead of the usual 1.5mA because this tablet tends to give false-positive button-presses when it is set to 1.5mA. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
