- 25 Nov, 2019 4 commits
-
-
Nathan Chancellor authored
Commit aea44714 ("powerpc: Disable -Wbuiltin-requires-header when setjmp is used") disabled -Wbuiltin-requires-header because of a warning about the setjmp and longjmp declarations. r367387 in clang added another diagnostic around this, complaining that there is no jmp_buf declaration. In file included from ../arch/powerpc/xmon/xmon.c:47: ../arch/powerpc/include/asm/setjmp.h:10:13: error: declaration of built-in function 'setjmp' requires the declaration of the 'jmp_buf' type, commonly provided in the header <setjmp.h>. [-Werror,-Wincomplete-setjmp-declaration] extern long setjmp(long *); ^ ../arch/powerpc/include/asm/setjmp.h:11:13: error: declaration of built-in function 'longjmp' requires the declaration of the 'jmp_buf' type, commonly provided in the header <setjmp.h>. [-Werror,-Wincomplete-setjmp-declaration] extern void longjmp(long *, long); ^ 2 errors generated. We are not using the standard library's longjmp/setjmp implementations for obvious reasons; make this clear to clang by using -ffreestanding on these files. Cc: stable@vger.kernel.org # 4.14+ Suggested-by:
Segher Boessenkool <segher@kernel.crashing.org> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191119045712.39633-3-natechancellor@gmail.com
-
Nathan Chancellor authored
When building pseries_defconfig, building vdso32 errors out: error: unknown target ABI 'elfv1' This happens because -m32 in clang changes the target to 32-bit, which does not allow the ABI to be changed. Commit 4dc831aa ("powerpc: Fix compiling a BE kernel with a powerpc64le toolchain") added these flags to fix building big endian kernels with a little endian GCC. Clang doesn't need -mabi because the target triple controls the default value. -mlittle-endian and -mbig-endian manipulate the triple into either powerpc64-* or powerpc64le-*, which properly sets the default ABI. Adding a debug print out in the PPC64TargetInfo constructor after line 383 above shows this: $ echo | ./clang -E --target=powerpc64-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 $ echo | ./clang -E --target=powerpc64le-linux -mbig-endian -o /dev/null - Default ABI: elfv1 $ echo | ./clang -E --target=powerpc64le-linux -mlittle-endian -o /dev/null - Default ABI: elfv2 Don't specify -mabi when building with clang to avoid the build error with -m32 and not change any code generation. -mcall-aixdesc is not an implemented flag in clang so it can be safely excluded as well, see commit 238abecd ("powerpc: Don't use gcc specific options on clang"). pseries_defconfig successfully builds after this patch and powernv_defconfig and ppc44x_defconfig don't regress. Reviewed-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Krzysztof Kozlowski authored
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Christophe Leroy authored
fixmap is intended to map things permanently like the IMMR region on FSL SOC (8xx, 83xx, ...), so don't clear it when initialising paging() Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
- 21 Nov, 2019 5 commits
-
-
Michael Ellerman authored
The spectre_v2 test must be built 64-bit, it includes hand-written asm that is 64-bit only, and segfaults if built 32-bit. Fixes: c790c3d2 ("selftests/powerpc: Add a test of spectre_v2 mitigations") Signed-off-by:
-
Oliver O'Halloran authored
On PowerNV the PCIe topology is (currently) managed by the powernv platform code in Linux in cooperation with the platform firmware. Linux's native PCIe port service drivers operate independently of both and this can cause problems. The main issue is that the portbus driver will conflict with the platform specific hotplug driver (pnv_php) over ownership of the MSI used to notify the host when a hotplug event occurs. The portbus driver claims this MSI on behalf of the individual port services because the same interrupt is used for hotplug events, PMEs (on root ports), and link bandwidth change notifications. The portbus driver will always claim the interrupt even if the individual port service drivers, such as pciehp, are compiled out. The second, bigger, problem is that the hotplug port service driver fundamentally does not work on PowerNV. The platform assumes that all PCI devices have a corresponding arch-specific handle derived from the DT node for the device (pci_dn) and without one the platform will not allow a PCI device to be enabled. This problem is largely due to historical baggage, but it can't be resolved without significant re-factoring of the platform PCI support. We can fix these problems in the interim by setting the "pcie_ports_disabled" flag during platform initialisation. The flag indicates the platform owns the PCIe ports which stops the portbus driver from being registered. This does have the side effect of disabling all port services drivers that is: AER, PME, BW notifications, hotplug, and DPC. However, this is not a huge disadvantage on PowerNV since these services are either unused or handled through other means. Fixes: 66725152 ("PCI/hotplug: PowerPC PowerNV PCI hotplug driver") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
Christophe Leroy authored
arch/powerpc/kernel/ contains 8 files dedicated to kexec. Move them into a dedicated subdirectory. Signed-off-by:
-
Christophe Leroy authored
Almost half of misc_32.S is dedicated to kexec. That's the relocation function for kexec. Drop it into a dedicated kexec_relocate_32.S Signed-off-by:
-
Christophe Leroy authored
There is a config item CONFIG_SIMPLE_GPIO which provides simple memory mapped GPIOs specific to powerpc. However, the only platform which selects this option is mpc5200, and this platform doesn't use it. There are three boards calling simple_gpiochip_init(), but as they don't select CONFIG_SIMPLE_GPIO, this is just a nop. Simple_gpio is just redundant with the generic MMIO GPIO driver which can be found in driver/gpio/ and selected via CONFIG_GPIO_GENERIC_PLATFORM, so drop simple_gpio driver. Signed-off-by:
-
- 19 Nov, 2019 7 commits
-
-
Christophe Leroy authored
On mpc83xx with a QE, IMMR is 2Mbytes and aligned on 2Mbytes boundarie. On mpc83xx without a QE, IMMR is 1Mbyte and 1Mbyte aligned. Each driver will map a part of it to access the registers it needs. Some drivers will map the same part of IMMR as other drivers. In order to reduce TLB misses, map the full IMMR with a BAT. If it is 2Mbytes aligned, map 2Mbytes. If there is no QE, the upper part will remain unused, but it doesn't harm as it is mapped as guarded memory. When the IMMR is not aligned on a 2Mbytes boundarie, only map 1Mbyte. Signed-off-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Christophe Leroy authored
If no BAT is given to setbat(), select an available BAT. Signed-off-by:
-
Christophe Leroy authored
Powerpc now has EARLY_IOREMAP. Next step is to convert all early users of ioremap() to early_ioremap(). Add a warning to help locate those users. Signed-off-by:
-
Christophe Leroy authored
Add support for GENERIC_EARLY_IOREMAP. Let's define 16 slots of 256Kbytes each for early ioremap. Signed-off-by:
-
Christophe Leroy authored
Modify back __set_fixmap() to using __fix_to_virt() instead of fix_to_virt() otherwise the following happens because it seems GCC doesn't see idx as a builtin const. CC mm/early_ioremap.o In file included from ./include/linux/kernel.h:11:0, from mm/early_ioremap.c:11: In function ‘fix_to_virt’, inlined from ‘__set_fixmap’ at ./arch/powerpc/include/asm/fixmap.h:87:2, inlined from ‘__early_ioremap’ at mm/early_ioremap.c:156:4: ./include/linux/compiler.h:350:38: error: call to ‘__compiletime_assert_32’ declared with attribute error: BUILD_BUG_ON failed: idx >= __end_of_fixed_addresses _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^ ./include/linux/compiler.h:331:4: note: in definition of macro ‘__compiletime_assert’ prefix ## suffix(); \ ^ ./include/linux/compiler.h:350:2: note: in expansion of macro ‘_compiletime_assert’ _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^ ./include/linux/build_bug.h:39:37: note: in expansion of macro ‘compiletime_assert’ #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^ ./include/linux/build_bug.h:50:2: note: in expansion of macro ‘BUILD_BUG_ON_MSG’ BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) ^ ./include/asm-generic/fixmap.h:32:2: note: in expansion of macro ‘BUILD_BUG_ON’ BUILD_BUG_ON(idx >= __end_of_fixed_addresses); ^ Signed-off-by: -
Christophe Leroy authored
Since commit f86ef74e ("powerpc/8xx: Fix vaddr for IMMR early remap"), the IMMR area has been mapped at startup with fixmap. Use that fixmap directly instead of calling ioremap(), this avoids calling ioremap() early before the slab is available. Signed-off-by:
-
Christophe Leroy authored
Functions cpm1_clk_setup(), cpm1_set_pin(), cpm_pic_init() and mpc8xx_pic_init() are only called from __init functions, so mark them __init as well. Signed-off-by:
-
- 18 Nov, 2019 8 commits
-
-
Christophe Leroy authored
SET_MSR_EE() is just use in this file and doesn't provide any added value compared to mtmsr(). Drop it. Add a wrtee() inline function to use wrtee/wrteei insn. Replace #ifdefs by IS_ENABLED() Signed-off-by:
-
Christophe Leroy authored
Most 8xx registers have specific names, so just include reg_8xx.h all the time in reg.h in order to have them defined even when CONFIG_PPC_8xx is not selected. This will avoid the need for #ifdefs in C code. Guard SPRN_ICTRL in an #ifdef CONFIG_PPC_8xx as this register has same name but different meaning and different spr number as another register in the mpc7450. Signed-off-by:
-
Christophe Leroy authored
mftb() includes a feature fixup for CELL ppc. Use ASM_FTR_IFSET() macro instead of opencoding the setup of the fixup sections. Signed-off-by:
-
Christophe Leroy authored
Commit d2f15e09 ("powerpc/32: always populate page tables for Abatron BDI.") wrongly sets page tables for any PPC32 for using BDI, and does't update them after init (remove RX on init section, set text and rodata read-only) Only the 8xx requires page tables to be populated for using the BDI. They also need to be populated in order to see the mappings in /sys/kernel/debug/kernel_page_tables On BOOK3S_32, pages that are not mapped by page tables are mapped by BATs. The BDI knows BATs and they can be viewed in /sys/kernel/debug/powerpc/block_address_translation Only set pagetables for RAM and IMMR on the 8xx and properly update them at the end of init. Signed-off-by:
-
Christophe Leroy authored
DSISR (or ESR on some CPUs) has a bit to tell if the fault is due to a read or a write. Display it. Signed-off-by:
Santosh Sivaraj <santosh@fossix.org> Signed-off-by:
-
Christophe Leroy authored
powerpc always selects CONFIG_MMU and CONFIG_MMU is not checked anywhere else in powerpc code. Drop the #ifdef and the alternative part of is_ioremap_addr() Fixes: 9bd3bb67 ("mm/nvdimm: add is_ioremap_addr and use that to check ioremap address") Signed-off-by:
-
Christophe Leroy authored
BUG(), WARN() and friends are using a similar inline assembly to implement various traps with various flags. Lets refactor via a new BUG_ENTRY() macro. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linuxMichael Ellerman authored
Merge changes from Scott: Includes a couple of device tree fixes, a spelling fix, and leftover code cleanup.
-
- 17 Nov, 2019 4 commits
-
-
Valentin Longchamp authored
This removes the warnings about the fact that the 4 pci bridges (i.e. the 4 pci hosts) don't have any ranges. Signed-off-by:
Valentin Longchamp <valentin@longchamp.me> Signed-off-by:
-
Geert Uytterhoeven authored
Caching dates is never a good idea ;-) Fixes: e7affb1d ("powerpc/cache: add cache flush operation for various e500") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Rasmus Villemoes authored
Since commit 302c059f (QE: use subsys_initcall to init qe), mpc85xx_qe_init() has done nothing apart from possibly emitting a pr_err(). As part of reducing the amount of QE-related code in arch/powerpc/ (and eventually support QE on other architectures), remove this low-hanging fruit. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Valentin Longchamp authored
Change all phy-connection-type properties to phy-mode that are better supported by the fman driver. Use the more readable fixed-link node for the 2 sgmii links. Change the RGMII link to rgmii-id as the clock delays are added by the phy. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
- 14 Nov, 2019 2 commits
-
-
Harish authored
On older distributions like Sles12SP5 gcc does not recognize -no-pie option making the powerpc selftests build to fail Fixes the following: gcc: error: unrecognized command line option ‘-no-pie’ Signed-off-by:
Harish <harish@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
This is a slight rebase of Scott's next branch, which contained the KASLR support for book3e 32-bit, to squash in a couple of small fixes. See the original pull request: https://lore.kernel.org/r/20191022232155.GA26174@home.buserror.net
-
- 13 Nov, 2019 10 commits
-
-
Jason Yan authored
Add document to explain how we implement KASLR for fsl_booke32. Signed-off-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
Jason Yan authored
Like all other architectures such as x86 or arm64, include KASLR offset in VMCOREINFO ELF notes to assist in debugging. After this, we can use crash --kaslr option to parse vmcore generated from a kaslr kernel. Note: The crash tool needs to support --kaslr too. Signed-off-by:
-
Jason Yan authored
When kaslr is enabled, the kernel offset is different for every boot. This brings some difficult to debug the kernel. Dump out the kernel offset when panic so that we can easily debug the kernel. This code is derived from x86/arm64 which has similar functionality. Signed-off-by:
Diana Craciun <diana.craciun@nxp.com> Tested-by:
-
Jason Yan authored
One may want to disable kaslr when boot, so provide a cmdline parameter 'nokaslr' to support this. Signed-off-by:
-
Jason Yan authored
The original kernel still exists in the memory, clear it now. Signed-off-by:
-
Jason Yan authored
After we have the basic support of relocate the kernel in some appropriate place, we can start to randomize the offset now. Entropy is derived from the banner and timer, which will change every build and boot. This not so much safe so additionally the bootloader may pass entropy via the /chosen/kaslr-seed node in device tree. We will use the first 512M of the low memory to randomize the kernel image. The memory will be split in 64M zones. We will use the lower 8 bit of the entropy to decide the index of the 64M zone. Then we chose a 16K aligned offset inside the 64M zone to put the kernel in. We also check if we will overlap with some areas like the dtb area, the initrd area or the crashkernel area. If we cannot find a proper area, kaslr will be disabled and boot from the original kernel. Some pieces of code are derived from arch/x86/boot/compressed/kaslr.c or arch/arm64/kernel/kaslr.c such as rotate_xor(). Credit goes to Kees and Ard. Signed-off-by:
-
Jason Yan authored
This patch add support to boot kernel from places other than KERNELBASE. Since CONFIG_RELOCATABLE has already supported, what we need to do is map or copy kernel to a proper place and relocate. Freescale Book-E parts expect lowmem to be mapped by fixed TLB entries(TLB1). The TLB1 entries are not suitable to map the kernel directly in a randomized region, so we chose to copy the kernel to a proper place and restart to relocate. The offset of the kernel was not randomized yet(a fixed 64M is set). We will randomize it in the next patch. Signed-off-by:
-
Jason Yan authored
Add a new helper reloc_kernel_entry() to jump back to the start of the new kernel. After we put the new kernel in a randomized place we can use this new helper to enter the kernel and begin to relocate again. Signed-off-by:
-
Jason Yan authored
Add a new helper create_kaslr_tlb_entry() to create a tlb entry by the virtual and physical address. This is a preparation to support boot kernel at a randomized address. Signed-off-by:
-
Jason Yan authored
Now the kernel base is a fixed value - KERNELBASE. To support KASLR, we need a variable to store the kernel base. Signed-off-by:
-
