Add Device Tree suport to the omap-rng driver.
Currently, only support for OMAP2 and OMAP3 is
being added but support for OMAP4 and OMAP5 will
be added in a subsequent patch.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

platform_set_drvdata() is called twice in driver probe.
Removing the duplicated call.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

module_platform_driver() makes the code simpler.
Using the macro in the driver.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The co-processor has several limits regarding the length of
scatter/gather lists and the total number of bytes in it. These limits
are available in the device tree, as following:

 - "ibm,max-sg-len": maximum number of bytes of each scatter/gather
   list.

 - "ibm,max-sync-cop": used for synchronous operations, it is an array
   of structures that contains information regarding the limits that
   must be considered for each mode and operation. The most important
   limits in it are:
   	- The total number of bytes that a scatter/gather list can hold.
	- The maximum number of elements that a scatter/gather list can
	  have.

This patch updates the NX driver to perform several hyper calls if
needed in order to always respect the length limits for scatter/gather
lists.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The co-processor receives data to be hashed through scatter/gather lists
pointing to physical addresses. When a vmalloc'ed data is given, the
driver must calculate the physical address to each page of the data.

However the current version of it just calculates the physical address
once and keeps incrementing it even when a page boundary is crossed.
This patch fixes this behaviour.
Reviewed-by: Fionnuala Gunter <fin@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Reviewed-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Signed-off-by: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch removes redundant execution of the same test suite in cases
where alg and driver variables are the same (e.g. when alg_test is
called from tcrypt_test)
Signed-off-by: Cristian Stoica <cristian.stoica@freescale.com>
Reviewed-by: Horia Geanta <horia.geanta@freescale.com>
Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Additional and optional dependencies not found while building the kernel and
modules, can now be declared explicitly.
Signed-off-by: Andreas Robinson <andr345@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use devm_kzalloc() to make cleanup paths simpler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Using devm_request_irq() rather than request_irq().
So removing free_irq() calls from the probe error
path and the remove handler.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for the OMAP5 version of the SHAM module
that is present on OMAP5 and AM43xx SoCs.

This module is very simialar to OMAP4 version of SHAM module,
and adds SHA384 SHA512 hardware-accelerated hash functions to it.
To handle the higher digest size of SHA512, few SHA512_DIGEST_i
(i=1-16, and first 8 registers are duplicated from SHA_DIGEST_i
registers) registers are added at the end of register set.
So adding the above register offsets and module info in pdata.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adding support for SHA348 and SHA512 in addition to MD5, SHA1, SHA224
SHA256 that the omap sha module supports.

In order to add the support
- Removed hard coded register offsets and passing offsets from pdata
- Updating Flag offsets so that they can be used for SHA256 and SHA512
- Adding the algo info.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() may fail, so let's check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Logging messages without newlines are possibly interleaved
with other messages.  Add terminating newlines to avoid
this.

Other miscellaneous changes:

Make arrays const to reduce data size
Add pr_fmt to prefix pr_<level>, remove now unused DEV_DBG_NAME
Coalesce formats, align arguments
Remove unnecessary OOM messages as dump_stack is already done
Remove unnecessary cast of void *
Change kzalloc(sizeof(struct)...) to kzalloc(sizeof(*var), ...)
Reduce indents in struct definitions
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove the dependency of RNG instantiation on Job Ring. Now
RNG instantiation for devices with RNG version > 4 is done
by directly programming DECO 0.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

DESC_JOB_IO_LEN is a generic macro which indicates the space required in
the descriptor for placing SEQIN/OUT commands, job descriptor header,
shared descriptor pointer. Moving it to descriptor construction file
which can be supposedly included by different algo offload files.

Change-Id: Ic8900990d465e9079827b0c7fcacc61766d7efb6
Signed-off-by: Vakul Garg <vakul@freescale.com>
Reviewed-by: Geanta Neag Horia Ioan-B05471 <horia.geanta@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Pull crypto update from Herbert Xu:
 - Do not idle omap device between crypto operations in one session.
 - Added sha224/sha384 shims for SSSE3.
 - More optimisations for camellia-aesni-avx2.
 - Removed defunct blowfish/twofish AVX2 implementations.
 - Added unaligned buffer self-tests.
 - Added PCLMULQDQ optimisation for CRCT10DIF.
 - Added support for Freescale's DCP co-processor
 - Misc fixes.

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (44 commits)
  crypto: testmgr - test hash implementations with unaligned buffers
  crypto: testmgr - test AEADs with unaligned buffers
  crypto: testmgr - test skciphers with unaligned buffers
  crypto: testmgr - check that entries in alg_test_descs are in correct order
  Revert "crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher"
  Revert "crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher"
  crypto: camellia-aesni-avx2 - tune assembly code for more performance
  hwrng: bcm2835 - fix MODULE_LICENSE tag
  hwrng: nomadik - use clk_prepare_enable()
  crypto: picoxcell - replace strict_strtoul() with kstrtoul()
  crypto: dcp - Staticize local symbols
  crypto: dcp - Use NULL instead of 0
  crypto: dcp - Use devm_* APIs
  crypto: dcp - Remove redundant platform_set_drvdata()
  hwrng: use platform_{get,set}_drvdata()
  crypto: omap-aes - Don't idle/start AES device between Encrypt operations
  crypto: crct10dif - Use PTR_RET
  crypto: ux500 - Cocci spatch "resource_size.spatch"
  crypto: sha256_ssse3 - add sha224 support
  crypto: sha512_ssse3 - add sha384 support
  ...

Pull ubi fixes from Artem Bityutskiy:
 "A couple of fixes and clean-ups, allow for assigning user-defined UBI
  device numbers when attaching MTD devices by using the "mtd=" module
  parameter"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubi:
  UBI: support ubi_num on mtd.ubi command line
  UBI: fastmap break out of used PEB search
  UBI: document UBI_IOCVOLUP better in user header
  UBI: do not abort init when ubi.mtd devices cannot be found
  UBI: drop redundant "UBI error" string

Pull ubifs fix from Artem Bityutskiy:
 "Only a single patch which fixes a message"

* tag 'upstream-3.11-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: correct mount message

Pull device tree updates from Grant Likely:
 "This branch contains the following changes:
   - Removal of CONFIG_OF_DEVICE, it is always enabled by CONFIG_OF
   - Remove #ifdef from linux/of_platform.h to increase compiler syntax
     coverage
   - Bug fix for address decoding on Bimini and js2x powerpc platforms.
   - miscellaneous binding changes

  One note on the above.  The binding changes going in from all kinds of
  different trees has gotten rather out of hand.  I picked up some
  during this cycle, but even going though my tree isn't a great fit.

  Ian Campbell has prototyped splitting the bindings and .dtb files into
  a separate repository.  The plan is to migrate to using that sometime
  in the next few kernel releases which should get rid of a lot of the
  churn on binding docs and .dts files"

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux:
  of: Fix address decoding on Bimini and js2x machines
  of: remove CONFIG_OF_DEVICE
  usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE
  of: remove of_platform_driver
  ibmebus: convert of_platform_driver to platform_driver
  driver core: move to_platform_driver to platform_device.h
  mfd: DT bindings for the palmas family MFD
  ARM: dts: omap3-devkit8000: fix NAND memory binding
  of/base: fix typos
  of: remove #ifdef from linux/of_platform.h

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.

  You will get a new touchsreen driver for Cypress 4th generation
  devices, a driver for a special controller implementing PS/2 protocol
  in OLPC devices, and a driver for power key for SiRFprimaII PWRC.

  HID and bcm5497 now support for the 2013 MacBook Air.

  EVIOCGKEY and the rest of evdev ioctls now flush events of matching
  type from the client's event queue so that clients can be sure any
  events received after issuing EVIOCG* ioctl are new events.

  And a host of cleanups and improvements in other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: cyttsp4 - kfree xfer_buf on error path in probe()
  Input: tps6507x-ts - select INPUT_POLLDEV
  Input: bcm5974 - add support for the 2013 MacBook Air
  HID: apple: Add support for the 2013 Macbook Air
  Input: cyttsp4 - leak on error path in probe()
  Input: cyttsp4 - silence NULL dereference warning
  Input: cyttsp4 - silence shift wrap warning
  Input: tps6507x-ts - convert to polled input device infrastructure
  ARM: davinci: da850-evm: remove vref from touchscreen platform data
  Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp - I2C driver split into two modules
  Input: add OLPC AP-SP driver
  Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
  Input: tps6507x-ts - remove vref from platform data
  Input: tps6507x-ts - use bool for booleans
  Input: tps6507x-ts - remove bogus unreachable code
  Input: samsung-keypad - let device core setup the default pin configuration
  Input: wacom_i2c - implement hovering capability
  ...

If probe() fails after cd->xfer_buf allocated, it will not freed.
Added kfree(cd->xfer_buf) with and error label.
Signed-off-by: Ferruh Yigit <fery@cypress.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull i2c updates from Wolfram Sang:
 - new drivers: Kontron PLD, Wondermedia VT
 - mv64xxx driver gained sun4i support and a bigger cleanup
 - duplicate driver 'intel-mid' removed
 - added generic device tree binding for sda holding time (and
   designware driver already uses it)
 - we tried to allow driver probing with only device tree and no i2c
   ids, but I had to revert it because of side effects.  Needs some
   rethinking.
 - driver bugfixes, cleanups...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c-designware: use div_u64 to fix link
  i2c: Kontron PLD i2c bus driver
  i2c: iop3xxx: fix build failure after waitqueue changes
  i2c-designware: make SDA hold time configurable
  i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided
  i2c: imx: allow autoloading on dt ids
  i2c: mv64xxx: Fix transfer error code
  i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs
  i2c: omap: correct usage of the interrupt enable register
  i2c-pxa: prepare clock before use
  Revert "i2c: core: make it possible to match a pure device tree driver"
  i2c: nomadik: allocate adapter number dynamically
  i2c: nomadik: support elder Nomadiks
  i2c: mv64xxx: Add Allwinner sun4i compatible
  i2c: mv64xxx: make the registers offset configurable
  i2c: mv64xxx: Add macros to access parts of registers
  i2c: vt8500: Add support for I2C bus on Wondermedia SoCs
  i2c: designware: fix race between subsequent xfers
  i2c: bfin-twi: Read and write the FIFO in loop
  i2c: core: make it possible to match a pure device tree driver
  ...

Pull first round of SCSI updates from James Bottomley:
 "The patch set is mostly driver updates (usf, zfcp, lpfc, mpt2sas,
  megaraid_sas, bfa, ipr) and a few bug fixes.  Also of note is that the
  Buslogic driver has been rewritten to a better coding style and 64 bit
  support added.  We also removed the libsas limitation on 16 bytes for
  the command size (currently no drivers make use of this)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
  [SCSI] megaraid: minor cut and paste error fixed.
  [SCSI] ufshcd-pltfrm: remove unnecessary dma_set_coherent_mask() call
  [SCSI] ufs: fix register address in UIC error interrupt handling
  [SCSI] ufshcd-pltfrm: add missing empty slot in ufs_of_match[]
  [SCSI] ufs: use devres functions for ufshcd
  [SCSI] ufs: Fix the response UPIU length setting
  [SCSI] ufs: rework link start-up process
  [SCSI] ufs: remove version check before IS reg clear
  [SCSI] ufs: amend interrupt configuration
  [SCSI] ufs: wrap the i/o access operations
  [SCSI] storvsc: Update the storage protocol to win8 level
  [SCSI] storvsc: Increase the value of scsi timeout for storvsc devices
  [SCSI] MAINTAINERS: Add myself as the maintainer for BusLogic SCSI driver
  [SCSI] BusLogic: Port driver to 64-bit.
  [SCSI] BusLogic: Fix style issues
  [SCSI] libiscsi: Added new boot entries in the session sysfs
  [SCSI] aacraid: Fix for arrays are going offline in the system. System hangs
  [SCSI] ipr: IOA Status Code(IOASC) update
  [SCSI] sd: Update WRITE SAME heuristics
  [SCSI] fnic: potential dead lock in fnic_is_abts_pending()
  ...

Pull trivial tree updates from Jiri Kosina:
 "The usual stuff from trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  treewide: relase -> release
  Documentation/cgroups/memory.txt: fix stat file documentation
  sysctl/net.txt: delete reference to obsolete 2.4.x kernel
  spinlock_api_smp.h: fix preprocessor comments
  treewide: Fix typo in printk
  doc: device tree: clarify stuff in usage-model.txt.
  open firmware: "/aliasas" -> "/aliases"
  md: bcache: Fixed a typo with the word 'arithmetic'
  irq/generic-chip: fix a few kernel-doc entries
  frv: Convert use of typedef ctl_table to struct ctl_table
  sgi: xpc: Convert use of typedef ctl_table to struct ctl_table
  doc: clk: Fix incorrect wording
  Documentation/arm/IXP4xx fix a typo
  Documentation/networking/ieee802154 fix a typo
  Documentation/DocBook/media/v4l fix a typo
  Documentation/video4linux/si476x.txt fix a typo
  Documentation/virtual/kvm/api.txt fix a typo
  Documentation/early-userspace/README fix a typo
  Documentation/video4linux/soc-camera.txt fix a typo
  lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment
  ...

Pull HID updates from Jiri Kosina:
 - HID battery handling cleanup by David Herrmann
 - ELO 4000/4500 driver, which has been finally ported to be proper HID
   driver by Jiri Slaby
 - ps3remote driver functionality is now provided by generic sony
   driver, by Jiri Kosina
 - PS2/3 Buzz controllers support, by Colin Leitner
 - rework of wiimote driver including full extensions hotpluggin
   support, sub-device modularization and speaker support by David
   Herrmann

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits)
  HID: wacom: Intuos4 battery charging changes
  HID: i2c-hid: support sending HID output reports using the output register
  HID: kye: Add report fixup for Genius Gila Gaming mouse
  HID: wiimote: support Nintendo Wii U Pro Controller
  Input: make gamepad API keycodes more clear
  input: document gamepad API and add extra keycodes
  HID: explain out-of-range check better
  HID: fix false positive out of range values
  HID: wiimote: fix coccinelle warnings
  HID: roccat: check cdev_add return value
  HID: fold ps3remote driver into generic Sony driver
  HID: hyperv: convert alloc+memcpy to memdup
  HID: core: fix reporting of raw events
  HID: wiimote: discard invalid EXT data reports
  HID: wiimote: fix classic controller parsing
  HID: wiimote: init EXT/MP during device detection
  HID: wiimote: fix DRM debug-attr to correctly parse input
  HID: wiimote: add MP quirks
  HID: wiimote: remove old static extension support
  HID: wiimote: add "bboard_calib" attribute
  ...

Pull md updates from NeilBrown:
 "Mostly fixes, with a few minor features (eg 'last_sync_action' sysfs
  file)

  A couple marked for -stable including one recent bug which causes a
  RAID10 reshape to complete without moving any data :-(

  A couple more bugfixes (at least) to come, but haven't confirmed the
  right solution yet."

* tag 'md-3.11' of git://neil.brown.name/md:
  md/raid10: fix bug which causes all RAID10 reshapes to move no data.
  md/raid5: allow 5-device RAID6 to be reshaped to 4-device.
  md/raid10: fix two bugs affecting RAID10 reshape.
  md: remove doubled description for sync_max, merging it within sync_min/sync_max
  MD: Remember the last sync operation that was performed
  md: fix buglet in RAID5 -> RAID0 conversion.
  md/raid10: check In_sync flag in 'enough()'.
  md/raid10: locking changes for 'enough()'.
  md: replace strict_strto*() with kstrto*()
  md: Wait for md_check_recovery before attempting device removal.
  dm-raid: silence compiler warning on rebuilds_per_group.
  DM RAID: Fix raid_resume not reviving failed devices in all cases
  DM RAID: Break-up untidy function
  DM RAID: Add ability to restore transiently failed devices on resume

Merge Kconfig menu diet patches from Dave Hansen:
 "I think the "Kernel Hacking" menu has gotten a bit out of hand.  It is
  over 120 lines long on my system with everything enabled and options
  are scattered around it haphazardly.

        http://sr71.net/~dave/linux/kconfig-horror.png

  Let's try to introduce some sanity.  This set takes that 120 lines
  down to 55 and makes it vastly easier to find some things.  It's a
  start.

  This set stands on its own, but there is plenty of room for follow-up
  patches.  The arch-specific debug options still end up getting stuck
  in the top-level "kernel hacking" menu.  OPTIMIZE_INLINING, for
  instance, could obviously go in to the "compiler options" menu, but
  the fact that it is defined in arch/ in a separate Kconfig file keeps
  it on its own for the moment.

  The Signed-off-by's in here look funky.  I changed employers while
  working on this set, so I have signoffs from both email addresses"

* emailed patches from Dave Hansen <dave@sr71.net>:
  hang and lockup detection menu
  kconfig: consolidate printk options
  group locking debugging options
  consolidate compilation option configs
  consolidate runtime testing configs
  order memory debugging Kconfig options
  consolidate per-arch stack overflow debugging options

The hard/softlockup and hung-task entries take up 6 lines
of screen real-estate when enabled.  I bet folks don't
mess with these _that_ often, so move them in a group
down a level.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Same deal, take the printk-related things and hide them in a menu.
This takes another 4 items out of the top-level menu.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Original posting:

	http://lkml.kernel.org/r/20121214184208.D9E5804D@kernel.stglabs.ibm.com

There are quite a few of these, and we want to make sure that
there is one-stop-shopping for lock debugging.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Original Post:

	http://lkml.kernel.org/r/20121214184207.6E00DDEC@kernel.stglabs.ibm.com

Again, trying to come up with some common themes of the stuff in
the kernel hacking menu...  There are quite a few options to
tweak compilation in some way, or perform extra compile-time
checks.  Give them their own menu.

The diff here looks a bit funny... makes it look like I'm
moving debugfs even though I'm actually moving the options on
either side of it.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Original posting:

	http://lkml.kernel.org/r/20121214184206.FC11422F@kernel.stglabs.ibm.com

These runtime tests are great, except that there are a lot of them,
and they are very rarely needed.  Give them their own menu so that
only the folks who need them will have to go looking for them.

Note that there are some other runtime tests that are not in here,
like for RCU or locking.  This menu should only be used for tests
that do not have a more appropriate home.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Original posting:

	http://lkml.kernel.org/r/20121214184203.37E6C724@kernel.stglabs.ibm.com

There are a *LOT* of memory debugging options.  They are just scattered
all over the "Kernel Hacking" menu.  Sure, "memory debugging" is a very
vague term and it's going to be hard to make absolute rules about what
goes in here, but this has to be better than what we had before.

This does, however, leave out the architecture-specific memory
debugging options (like x86's DEBUG_SET_MODULE_RONX).  There would need
to be some substantial changes to move those in here.  Kconfig can not
easily mix arch-specific and generic options together: it really
requires a file per-architecture, and I think having an
arch/foo/Kconfig.debug-memory might be taking things a bit too far
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Original posting:

	http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com

Several architectures have similar stack debugging config options.
They all pretty much do the same thing, some with slightly
differing help text.

This patch changes the architectures to instead enable a Kconfig
boolean, and then use that boolean in the generic Kconfig.debug
to present the actual menu option.  This removes a bunch of
duplication and adds consistency across arches.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge hpfs patches from Mikulas Patocka.

* emailed patches from Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>:
  hpfs: implement prefetch to improve performance
  hpfs: use mpage
  hpfs: better test for errors

This patch implements prefetch to improve performance.  It helps mostly
when scanning the bitmaps to calculate free space.
Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the mpage interface to improve performance.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The test if bitmap access is out of bound could errorneously pass if the
device size is divisible by 16384 sectors and we are asking for one bitmap
after the end.

Check for invalid size in the superblock. Invalid size could cause integer
overflows in the rest of the code.
Signed-off-by: Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>