- 28 Oct, 2019 20 commits
-
-
Bart Van Assche authored
The dma_set_max_seg_size() call in setup_dma_device() does not have any effect since device->dev.dma_parms is NULL. Fix this by initializing device->dev.dma_parms first. Link: https://lore.kernel.org/r/20191025225830.257535-5-bvanassche@acm.org Fixes: d10bcf94 ("RDMA/umem: Combine contiguous PAGE_SIZE regions in SGEs") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Bart Van Assche authored
Increase the DMA max_segment_size parameter from 64 KB to 2 GB. Link: https://lore.kernel.org/r/20191025225830.257535-4-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Increase the DMA max_segment_size parameter from 64 KB to 2 GB. Link: https://lore.kernel.org/r/20191025225830.257535-3-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
If dev->dma_device->params == NULL then the maximum DMA segment size is 64 KB. See also the dma_get_max_seg_size() implementation. This patch fixes the following kernel warning: DMA-API: infiniband rxe0: mapping sg segment longer than device claims to support [len=126976] [max=65536] WARNING: CPU: 4 PID: 4848 at kernel/dma/debug.c:1220 debug_dma_map_sg+0x3d9/0x450 RIP: 0010:debug_dma_map_sg+0x3d9/0x450 Call Trace: srp_queuecommand+0x626/0x18d0 [ib_srp] scsi_queue_rq+0xd02/0x13e0 [scsi_mod] __blk_mq_try_issue_directly+0x2b3/0x3f0 blk_mq_request_issue_directly+0xac/0xf0 blk_insert_cloned_request+0xdf/0x170 dm_mq_queue_rq+0x43d/0x830 [dm_mod] __blk_mq_try_issue_directly+0x2b3/0x3f0 blk_mq_request_issue_directly+0xac/0xf0 blk_mq_try_issue_list_directly+0xb8/0x170 blk_mq_sched_insert_requests+0x23c/0x3b0 blk_mq_flush_plug_list+0x529/0x730 blk_flush_plug_list+0x21f/0x260 blk_mq_make_request+0x56b/0xf20 generic_make_request+0x196/0x660 submit_bio+0xae/0x290 blkdev_direct_IO+0x822/0x900 generic_file_direct_write+0x110/0x200 __generic_file_write_iter+0x124/0x2a0 blkdev_write_iter+0x168/0x270 aio_write+0x1c4/0x310 io_submit_one+0x971/0x1390 __x64_sys_io_submit+0x12a/0x390 do_syscall_64+0x6f/0x2e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Link: https://lore.kernel.org/r/20191025225830.257535-2-bvanassche@acm.org Cc: <stable@vger.kernel.org> Fixes: 0b5cb330 ("RDMA/srp: Increase max_segment_size") Signed-off-by:
-
Bernard Metzler authored
Do not release qp state lock if not previously acquired. Fixes: cf049bb3 ("RDMA/siw: Fix SQ/RQ drain logic") Link: https://lore.kernel.org/r/20191025142903.20625-1-bmt@zurich.ibm.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Potnuri Bharat Teja authored
Query speed/width from corresponding netdev. Link: https://lore.kernel.org/r/1572001022-4533-1-git-send-email-bharat@chelsio.comSigned-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Michal Kalderon authored
User QPs pbl's weren't freed properly. MR pbls weren't freed properly. Fixes: e0290cce ("qedr: Add support for memory registeration verbs") Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.comSigned-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Michal Kalderon authored
Re-design of the iWARP CM related objects reference counting and synchronization methods, to ensure operations are synchronized correctly and that memory allocated for "ep" is properly released. Also makes sure QP memory is not released before ep is finished accessing it. Where as the QP object is created/destroyed by external operations, the ep is created/destroyed by internal operations and represents the tcp connection associated with the QP. QP destruction flow: - needs to wait for ep establishment to complete (either successfully or with error) - needs to wait for ep disconnect to be fully posted to avoid a race condition of disconnect being called after reset. - both the operations above don't always happen, so we use atomic flags to indicate whether the qp destruction flow needs to wait for these completions or not, if the destroy is called before these operations began, the flows will check the flags and not execute them ( connect / disconnect). We use completion structure for waiting for the completions mentioned above. The QP refcnt was modified to kref object. The EP has a kref added to it to handle additional worker thread accessing it. Memory Leaks - https://www.spinics.net/lists/linux-rdma/msg83762.html Concurrency not managed correctly - https://www.spinics.net/lists/linux-rdma/msg67949.html Fixes: de0089e6 ("RDMA/qedr: Add iWARP connection management qp related callbacks") Link: https://lore.kernel.org/r/20191027200451.28187-4-michal.kalderon@marvell.comReported-by:
Chuck Lever <chuck.lever@oracle.com> Reported-by:
-
Michal Kalderon authored
The qpids xarray isn't accessed from irq context and therefore there is no need to use the xa_XXX_irq version of the apis. Remove the _irq. Fixes: b6014f9e ("qedr: Convert qpidr to XArray") Link: https://lore.kernel.org/r/20191027200451.28187-3-michal.kalderon@marvell.comSigned-off-by:
-
Michal Kalderon authored
There was a missing initialization for the srqs xarray. SRQs xarray can also be called from irq context when searching for an element and uses the xa_XXX_irq apis, therefore should be initialized with IRQ flags. Fixes: 9fd15987 ("qedr: Convert srqidr to XArray") Link: https://lore.kernel.org/r/20191027200451.28187-2-michal.kalderon@marvell.comSigned-off-by:
-
Jason Gunthorpe authored
This was missed when nes was removed. Fixes: 2d3c72ed ("rdma: Remove nes") Link: https://lore.kernel.org/r/20191024135059.GA20084@ziepe.caSigned-off-by:
-
Colin Ian King authored
Currently, the error return path when the call to function dev->dfx->query_cqc_info fails will leak object 'context'. Fix this by making the error return path via 'err' return return codes rather than -EMSGSIZE, set ret appropriately for all error return paths and for the memory leak now return via 'err' rather than just returning without freeing context. Link: https://lore.kernel.org/r/20191024131034.19989-1-colin.king@canonical.com Addresses-Coverity: ("Resource leak") Fixes: e1c9a0dc ("RDMA/hns: Dump detailed driver-specific CQ") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Yangyang Li authored
qpc/cqc timer entry size needs one page, but currently they are fixedly configured to 4096, which is not appropriate in 64K page scenarios. So they should be modified to PAGE_SIZE. Fixes: 0e40dc2f ("RDMA/hns: Add timer allocation support for hip08") Link: https://lore.kernel.org/r/1571908917-16220-3-git-send-email-liweihang@hisilicon.comSigned-off-by:
Yangyang Li <liyangyang20@huawei.com> Signed-off-by:
Weihang Li <liweihang@hisilicon.com> Signed-off-by:
-
Lijun Ou authored
SRQ's page size configuration of BA and buffer should depend on current PAGE_SHIFT, or it can't work in scenario of 64K page. Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode") Link: https://lore.kernel.org/r/1571908917-16220-2-git-send-email-liweihang@hisilicon.comSigned-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Bart Van Assche authored
Unlike the iSCSI target driver, for the SRP target driver it is sufficient if a single TPG can be associated with each RDMA port name. However, users started associating multiple TPGs with RDMA port names. Support this by converting the single TPG in struct srpt_port_id into a list. This patch fixes the following list corruption issue: list_add corruption. prev->next should be next (ffffffffc0a080c0), but was ffffa08a994ce6f0. (prev=ffffa08a994ce6f0). WARNING: CPU: 2 PID: 2597 at lib/list_debug.c:28 __list_add_valid+0x6a/0x70 CPU: 2 PID: 2597 Comm: targetcli Not tainted 5.4.0-rc1.3bfa3c9602a7 #1 RIP: 0010:__list_add_valid+0x6a/0x70 Call Trace: core_tpg_register+0x116/0x200 [target_core_mod] srpt_make_tpg+0x3f/0x60 [ib_srpt] target_fabric_make_tpg+0x41/0x290 [target_core_mod] configfs_mkdir+0x158/0x3e0 vfs_mkdir+0x108/0x1a0 do_mkdirat+0x77/0xe0 do_syscall_64+0x55/0x1d0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Link: https://lore.kernel.org/r/20191023204106.23326-1-bvanassche@acm.orgReported-by:
Honggang LI <honli@redhat.com> Fixes: a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by:
-
Leon Romanovsky authored
HNS redefined available in bits.h define and didn't use it, we can safely delete it. Link: https://lore.kernel.org/r/20191023054239.31648-1-leon@kernel.orgSigned-off-by:
-
Jason Gunthorpe authored
The "ucmd->log_sq_bb_count" variable is a user controlled variable in the 0-255 range. If we shift more than then number of bits in an int then it's undefined behavior (it shift wraps), and potentially the int could become negative. Fixes: 9a443537 ("IB/hns: Add driver files for hns RoCE driver") Link: https://lore.kernel.org/r/20190608092514.GC28890@mwandaReported-by:
-
Leon Romanovsky authored
Add Mellanox to lust of copyright holders and replace copyright boilerplate with relevant SPDX tag. Link: https://lore.kernel.org/r/20191020071559.9743-4-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
There is a specific define keyword to check if define exists or not, let's use it instead of open-coded variant. Link: https://lore.kernel.org/r/20191020071559.9743-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
Function cm_is_active_peer is not used, delete it. Link: https://lore.kernel.org/r/20191020071559.9743-2-leon@kernel.orgSigned-off-by:
-
- 24 Oct, 2019 1 commit
-
-
Leon Romanovsky authored
IB devices are allocated with kzalloc and don't need explicit zero assignments for their parameters. It can be removed safely. Link: https://lore.kernel.org/r/20191020055724.7410-1-leon@kernel.orgSigned-off-by:
-
- 23 Oct, 2019 2 commits
-
-
Leon Romanovsky authored
The PID information can disappear asynchronously because the task can be killed and moved to zombie state. In this case, PID will be zero in similar way to the kernel tasks. Recognize such situation where we are asking to return orphaned object and simply skip filling PID attribute. As part of this change, document the same scenario in counter.c code. Link: https://lore.kernel.org/r/20191010071105.25538-3-leon@kernel.orgSigned-off-by:
-
Leon Romanovsky authored
IB resources are bounded to IB device and file descriptors, both entities are unaware to PID namespaces and to task lifetime. The difference in model caused to unpredictable behavior for the following scenario: 1. Create FD and context 2. Share it with ephemeral child 3. Create any object and exit that child The end result of this flow, that those newly created objects will be tracked by restrack, but won't be visible for users because task_struct associated with them already exited. The right thing is to rely on net namespace only for any filtering purposes and drop PID namespace. Link: https://lore.kernel.org/r/20191010071105.25538-2-leon@kernel.orgSigned-off-by:
-
- 22 Oct, 2019 17 commits
-
-
Parav Pandit authored
When IB device is undergoing unregistration, the GID cache is always cleaned up after all clients are unregistered with the below flow. __ib_unregister_device() disable_device() ib_cache_cleanup_one() gid_table_cleanup_one() cleanup_gid_table_port() There is no use in generating a GID change event at this stage, where there is no active client of the device and device is nearly unregistered. Link: https://lore.kernel.org/r/20191020065427.8772-4-leon@kernel.orgSigned-off-by:Parav Pandit <parav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
-
Michael Guralnik authored
There is little value in keeping separate function for one flag, provide it directly like any other mlx5 define. Link: https://lore.kernel.org/r/20191020064400.8344-2-leon@kernel.orgSigned-off-by:
Michael Guralnik <michaelgur@mellanox.com> Signed-off-by:
-
Ran Rozenstein authored
mlx5_ib_dc_atomic_is_supported function is not used anywhere. Remove the dead code. Fixes: a60109dc ("IB/mlx5: Add support for extended atomic operations") Link: https://lore.kernel.org/r/20191020064454.8551-1-leon@kernel.orgSigned-off-by:
Ran Rozenstein <ranro@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Chuhong Yuan authored
All current callers for uverbs_copy_to_struct_or_zero() already check that the attribute exists, but it make sense to verify the result like the other functions do. Link: https://lore.kernel.org/r/20191018081533.8544-1-hslester96@gmail.comSigned-off-by:
Chuhong Yuan <hslester96@gmail.com> Reviewed-by:
-
Parav Pandit authored
When a macvlan netdevice is used for RoCE, consider the tos->prio->tc mapping as SL using its lower netdevice. 1. If the lower netdevice is a VLAN netdevice, consider the VLAN netdevice and it's parent netdevice for mapping 2. If the lower netdevice is not a VLAN netdevice, consider tc mapping directly from the lower netdevice Link: https://lore.kernel.org/r/20191015072058.17347-1-leon@kernel.orgSigned-off-by:
-
Erez Alfasi authored
Add RDMA nldev netlink interface for dumping MR statistics information. Output example: $ ./ibv_rc_pingpong -o -P -s 500000000 local address: LID 0x0001, QPN 0x00008a, PSN 0xf81096, GID :: $ rdma stat show mr dev mlx5_0 mrn 2 page_faults 122071 page_invalidations 0 Link: https://lore.kernel.org/r/20191016062308.11886-5-leon@kernel.orgSigned-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
-
Erez Alfasi authored
Provide an ODP explicit/implicit type as part of 'rdma -dd resource show mr' dump. For example: $ rdma -dd resource show mr dev mlx5_0 mrn 1 rkey 0xa99a lkey 0xa99a mrlen 50000000 pdn 9 pid 7372 comm ibv_rc_pingpong drv_odp explicit For non-ODP MRs, we won't print "drv_odp ..." at all. Link: https://lore.kernel.org/r/20191016062308.11886-4-leon@kernel.orgSigned-off-by:
-
Erez Alfasi authored
So far res_get_common_{dumpit, doit} was using the default resource fill function which was defined as part of the nldev_fill_res_entry fill_entries. Add a fill function pointer as an argument allows us to use different fill function in case we want to dump different values then 'rdma resource' flow do, but still use the same existing general resources dumping flow. Link: https://lore.kernel.org/r/20191016062308.11886-3-leon@kernel.orgSigned-off-by: -
Erez Alfasi authored
Introduce ODP diagnostic counters and count the following per MR within IB/mlx5 driver: 1) Page faults: Total number of faulted pages. 2) Page invalidations: Total number of pages invalidated by the OS during all invalidation events. The translations can be no longer valid due to either non-present pages or mapping changes. Link: https://lore.kernel.org/r/20191016062308.11886-2-leon@kernel.orgSigned-off-by:
-
rd.dunlab@gmail.com authored
Add a driver-api chapter for InfiniBand interfaces. Link: https://lore.kernel.org/r/20191010035240.310347906@gmail.comSigned-off-by:
Randy Dunlap <rd.dunlab@gmail.com> Reviewed-by:
-
rd.dunlab@gmail.com authored
Add kernel-doc for missing function parameters. Remove excess kernel-doc descriptions. Fix expected kernel-doc formatting (use ':' instead of '-' after @funcarg). ../drivers/infiniband/sw/rdmavt/ah.c:138: warning: Excess function parameter 'udata' description in 'rvt_destroy_ah' ../drivers/infiniband/sw/rdmavt/vt.c:698: warning: Function parameter or member 'pkey_table' not described in 'rvt_init_port' ../drivers/infiniband/sw/rdmavt/cq.c:561: warning: Excess function parameter 'rdi' description in 'rvt_driver_cq_init' ../drivers/infiniband/sw/rdmavt/cq.c:575: warning: Excess function parameter 'rdi' description in 'rvt_cq_exit' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'qp' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2573: warning: Function parameter or member 'aeth' not described in 'rvt_add_rnr_timer' ../drivers/infiniband/sw/rdmavt/qp.c:2591: warning: Function parameter or member 'qp' not described in 'rvt_stop_rc_timers' ../drivers/infiniband/sw/rdmavt/qp.c:2624: warning: Function parameter or member 'qp' not described in 'rvt_del_timers_sync' ../drivers/infiniband/sw/rdmavt/qp.c:2697: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter_init' ../drivers/infiniband/sw/rdmavt/qp.c:2728: warning: Function parameter or member 'iter' not described in 'rvt_qp_iter_next' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'rdi' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'v' not described in 'rvt_qp_iter' ../drivers/infiniband/sw/rdmavt/qp.c:2796: warning: Function parameter or member 'cb' not described in 'rvt_qp_iter' Link: https://lore.kernel.org/r/20191010035240.251184229@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Correct function parameter names (typos or renames). Add kernel-doc notation for missing function parameters. ../drivers/infiniband/core/sa_query.c:1263: warning: Function parameter or member 'gid_attr' not described in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/sa_query.c:1263: warning: Excess function parameter 'sgid_attr' description in 'ib_init_ah_attr_from_path' ../drivers/infiniband/core/device.c:145: warning: Function parameter or member 'dev' not described in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:145: warning: Excess function parameter 'device' description in 'rdma_dev_access_netns' ../drivers/infiniband/core/device.c:1333: warning: Function parameter or member 'name' not described in 'ib_register_device' ../drivers/infiniband/core/device.c:1461: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1461: warning: Excess function parameter 'device' description in 'ib_unregister_device' ../drivers/infiniband/core/device.c:1483: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_and_put' ../drivers/infiniband/core/device.c:1550: warning: Function parameter or member 'ib_dev' not described in 'ib_unregister_device_queued' Link: https://lore.kernel.org/r/20191010035240.191542461@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Add kernel-doc notation for missing function parameters: ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'conn' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:365: warning: Function parameter or member 'task' not described in 'iser_send_command' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'conn' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'task' not described in 'iser_send_data_out' ../drivers/infiniband/ulp/iser/iser_initiator.c:437: warning: Function parameter or member 'hdr' not described in 'iser_send_data_out' Link: https://lore.kernel.org/r/20191010035240.132033937@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Various kernel-doc fixes: - fix typos - don't use /** for internal structs or functions - fix Return: kernel-doc formatting - add kernel-doc notation for missing function parameters ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:159: warning: Function parameter or member 'size' not described in 'iser_alloc_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:221: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fmr_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'ib_conn' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'cmds_max' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:304: warning: Function parameter or member 'size' not described in 'iser_alloc_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:338: warning: Function parameter or member 'ib_conn' not described in 'iser_free_fastreg_pool' ../drivers/infiniband/ulp/iser/iser_verbs.c:568: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_release' ../drivers/infiniband/ulp/iser/iser_verbs.c:603: warning: Function parameter or member 'iser_conn' not described in 'iser_conn_terminate' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'signal' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'ib_conn' not described in 'iser_post_send' ../drivers/infiniband/ulp/iser/iser_verbs.c:1040: warning: Function parameter or member 'tx_desc' not described in 'iser_post_send' Link: https://lore.kernel.org/r/20191010035240.070520193@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Add missing function parameter descriptions: ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'flags' not described in '__ib_alloc_pd' ../drivers/infiniband/core/verbs.c:257: warning: Function parameter or member 'caller' not described in '__ib_alloc_pd' Link: https://lore.kernel.org/r/20191010035240.011497492@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Fix kernel-doc warnings (typos or renames) in ib_srpt.h: ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_guid_id' not described in 'srpt_port' ../drivers/infiniband/ulp/srpt/ib_srpt.h:419: warning: Function parameter or member 'port_gid_id' not described in 'srpt_port' Link: https://lore.kernel.org/r/20191010035239.950150496@gmail.comSigned-off-by:
-
rd.dunlab@gmail.com authored
Remove kernel-doc notation on 4 structs since they are internal and none of the struct fields/members are described. This removes 45 kernel-doc warnings. Link: https://lore.kernel.org/r/20191010035239.818405496@gmail.comSigned-off-by:
-
