- 25 May, 2014 6 commits
-
-
Laurent Pinchart authored
The video enum_dv_timings and dv_timings_cap operations are deprecated. Implement the pad-level version of those operations to prepare for the removal of the video version. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The video enum_dv_timings and dv_timings_cap operations are deprecated. Implement the pad-level version of those operations to prepare for the removal of the video version. Signed-off-by:
-
Laurent Pinchart authored
The video enum_dv_timings and dv_timings_cap operations are deprecated. Implement the pad-level version of those operations to prepare for the removal of the video version. Signed-off-by:
-
Laurent Pinchart authored
The dv_timings_cap and enum_dv_timings subdev operations are implemented at the device level, but apply to pads. Create new variants of those operations at the pad level. The device level variants will be removed once all drivers are ported to the pad level DT timings operations. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by:
-
Ismael Luceno authored
Explicitly list the cards supported by and tested with this driver. Signed-off-by:
Ismael Luceno <ismael.luceno@corp.bluecherry.net> Signed-off-by:
-
Ismael Luceno authored
Instead of unconditionally writing SOLO_EOSD_EXT_SIZE() bytes to the OSD area (which is 64 or 128 kB depending on the PCI board) we only write the actual amount of data needed which is 16 * OSD_TEXT_MAX (= 16 * 44). Signed-off-by:
-
- 24 May, 2014 11 commits
-
-
Ezequiel Garcia authored
Currently stk1160_read_reg() uses a stack-allocated char to get the read control value. This is wrong because usb_control_msg() requires a kmalloc-ed buffer. This commit fixes such issue by kmalloc'ating a 1-byte buffer to receive the read value. While here, let's remove the urb_buf array which was meant for a similar purpose, but never really used. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Laurent Pinchart authored
The g_std and s_std operations are video-related, move them to the video ops where they belong. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Victor Lambret authored
Remove duplicated test of buffer presence at streamon Signed-off-by:
Victor Lambret <victor.lambret.ext@parrot.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Lad, Prabhakar authored
Signed-off-by:
-
Lad, Prabhakar authored
Drops check for #ifdef __KERNEL__, because this header is a Kernel only header, where this define is always true. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds supports to return -ENODATA to *std calls if the selected output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds suppport to return -ENODATA for *dv_timings calls if the current output does not support it. Signed-off-by:
-
Lad, Prabhakar authored
this patch uses SIMPLE_DEV_PM_OPS, and drops unneeded members from io_usrs, usrs and makes use of vb2 helepers instead. Signed-off-by:
-
Lad, Prabhakar authored
this patch groups the v4l2_ioctl_ops and align them appropriately. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops cropcap as this driver doesnt support cropping. Signed-off-by:
-
Mauro Carvalho Chehab authored
This patch removes some modprobe parameters, without any reason or description. I was supposed to not merge this patch, but It was merged by mistake. Revert it while nobody provides a good description for such patch. This reverts commit b952662f. Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
- 23 May, 2014 23 commits
-
-
Laurent Pinchart authored
Use the driver-specific inline function to cast from a subdev pointer to a tvp5150 pointer instead of the generic container_of(). Signed-off-by:
-
Pawel Osciak authored
When a resolution change point is reached, queue an event to signal the userspace that a new set of buffers is required before decoding can continue. Signed-off-by:
Pawel Osciak <posciak@chromium.org> Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Arun Kumar K authored
This event indicates that the video device has encountered a source parameter change during runtime. This can typically be a resolution change detected by a video decoder OR a format change detected by an input connector. This needs to be nofified to the userspace and the application may be expected to reallocate buffers before proceeding. The application can subscribe to events on a specific pad or input port which it is interested in. Signed-off-by:
-
Dan Carpenter authored
We should be returning -ENOMEM here instead of success. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Luis R. Rodriguez authored
There is a few conflicts with older symbols on older kernels so we have to patch this driver when backporting. Instead just make these routines specific to the driver. Signed-off-by:
Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by:
-
Luis R. Rodriguez authored
The current names clash with include/linux/leds.h namespace, although there is no compile issue currently this does affect backports. Drivers should also try to avoid generic namespaces for things like this. Cc: Felipe Pena <felipensp@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Laurent Pinchart authored
The XML entities for media structures start with the 'struct' word. Remove duplicate 'struct' from the entity users. Reported-by:
-
Lad, Prabhakar authored
Signed-off-by:
-
Lad, Prabhakar authored
this patch moves the initalization of video device to a single place and uses macro to define the driver name and use it appropriately on the required places. Signed-off-by:
-
Lad, Prabhakar authored
the started member was indicating whether streaming was started or not, this can be determined by vb2 offering, this patch replaces the started member from struct common_obj with appropriate vb2 calls. Signed-off-by:
-
Lad, Prabhakar authored
This field is set, but not used anymore. Remove it. No functional changes. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops reserving contigiuos memory for the device, as now with CMA support there is no need of this. This patch also prepares to removal of config_params. Signed-off-by:
-
Lad, Prabhakar authored
Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to use v4l2_fh_open() and vb2_fop_release, which allows to drop driver specific struct vpif_fh, as this is handeled by core. This patch also drops vpif_g/s_priority as this handeled by core. Signed-off-by:
-
Lad, Prabhakar authored
No need to reinvent the wheel. Just use the already existing functions for that. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops unnecessary check from start_streaming() callback as this is already done in try/s_fmt and some minor code cleanups, drops check for vb2_is_streaming() as this check is done by vb2 itself before calling this callback. Signed-off-by:
-
Lad, Prabhakar authored
this patch sets the sizes[0] of plane according to the fmt passed or which is being set in the channel, in both MMAP and USERPTR buffer type. This patch also move the calculation of offests(vpif_calculate_offsets()) to queue_setup() callback as after queue_setup() callback the application is no longer allowed to change format, and prepares to removal of config_params. Signed-off-by:
-
Lad, Prabhakar authored
this patch improve vpif_buffer_prepare() callback, as buf_prepare() callback is never called with invalid state and check for vb2_plane_vaddr(vb, 0) is dropped as payload check should be done unconditionally. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops buf_cleanup() callback as this callback is never called with buffer state active. Signed-off-by:
-
Lad, Prabhakar authored
this patch adds support to release the buffer by calling vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED if start_streaming() call back fails. Signed-off-by:
-
Lad, Prabhakar authored
this patch makes use of vb2_ops_wait_prepare/finish helper functions. Signed-off-by:
-
Lad, Prabhakar authored
this patch drops the buf_init() callback as init of buf list is not required. Signed-off-by:
-
Lad, Prabhakar authored
this patch moves the initalization of vb2 queue and the DMA context to probe() and clean up in remove() callback respectively. Signed-off-by:
-
