Pull ext4 fixes from Ted Ts'o:
 "A regression fix, bug fix, and a comment cleanup for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix potential htree corruption when growing large_dir directories
  ext4: remove conflicting comment from __ext4_forget
  ext4: fix potential uninitialized access to retval in kmmpd

Pull tracing fixes from Steven Rostedt:
 "Fix tracepoint race between static_call and callback data

  As callbacks to a tracepoint are paired with the data that is passed
  in when the callback is registered to the tracepoint, it must have
  that data passed to the callback when the tracepoint is triggered,
  else bad things will happen. To keep the two together, they are both
  assigned to a tracepoint structure and added to an array. The
  tracepoint call site will dereference the structure (via RCU) and call
  the callback in that structure along with the data in that structure.
  This keeps the callback and data tightly coupled.

  Because of the overhead that retpolines have on tracepoint callbacks,
  if there's only one callback attached to a tracepoint (a common case),
  then it is called via a static call (code modified to do a direct call
  instead of an indirect call). But to implement this, the data had to
  be decoupled from the callback, as now the callback is implemented via
  a direct call from the static call and not an indirect call from the
  dereferenced structure.

  Note, the static call only calls a callback used when there's a single
  callback attached to the tracepoint. If more than one callback is
  attached to the same tracepoint, then the static call will call an
  iterator function that goes back to dereferencing the structure
  keeping the callback and its data tightly coupled again.

  Issues can arise when going from 0 callbacks to one, as the static
  call is assigned to the callback, and it must take care that the data
  passed to it is loaded before the static call calls the callback.
  Going from 1 to 2 callbacks is not an issue, as long as the static
  call is updated to the iterator before the tracepoint structure array
  is updated via RCU. Going from 2 to more or back down to 2 is not an
  issue as the iterator can handle all theses cases. But going from 2 to
  1, care must be taken as the static call is now calling a callback and
  the data that is loaded must be the data for that callback.

  Care was taken to ensure the callback and data would be in-sync, but
  after a bug was reported, it became clear that not enough was done to
  make sure that was the case. These changes address this.

  The first change is to compare the old and new data instead of the old
  and new callback, as it's the data that can corrupt the callback, even
  if the callback is the same (something getting freed).

  The next change is to convert these transitions into states, to make
  it easier to know when a synchronization is needed, and to perform
  those synchronizations. The problem with this patch is that it slows
  down disabling all events from under a second, to making it take over
  10 seconds to do the same work. But that is addressed in the final
  patch.

  The final patch uses the RCU state functions to keep track of the RCU
  state between the transitions, and only needs to perform the
  synchronization if an RCU synchronization hasn't been done already.
  This brings the performance of disabling all events back to its
  original value. That's because no synchronization is required between
  disabling tracepoints but is required when enabling a tracepoint after
  its been disabled. If an RCU synchronization happens after the
  tracepoint is disabled, and before it is re-enabled, there's no need
  to do the synchronization again.

  Both the second and third patch have subtle complexities that they are
  separated into two patches. But because the second patch causes such a
  regression in performance, the third patch adds a "Fixes" tag to the
  second patch, such that the two must be backported together and not
  just the second patch"

* tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracepoint: Use rcu get state and cond sync for static call updates
  tracepoint: Fix static call function vs data state mismatch
  tracepoint: static call: Compare data on transition from 2->1 callees

Pull power management fixes from Rafael Wysocki:
 "Fix a recent regression in the timer events oriented (TEO) cpuidle
  governor causing it to misbehave when idle state 0 is disabled and
  rename two local variables for improved clarity on top of that"

* tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: teo: Rename two local variables in teo_select()
  cpuidle: teo: Fix alternative idle state lookup

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent ACPICA commit causing boot issues to appear on some
  systems"

* tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPICA: Fix memory leak caused by _CID repair function"

Pull ARM SoC fixes from Arnd Bergmann:
 "Lots of small fixes for Arm SoCs this time, nothing too worrying:

   - omap/beaglebone boot regression fix in gpt12 timer

   - revert for i.mx8 soc driver breaking as a platform_driver

   - kexec/kdump fixes for op-tee

   - various fixes for incorrect DT settings on imx, mvebu, omap, stm32,
     and tegra causing problems.

   - device tree fixes for static checks in nomadik, versatile, stm32

   - code fixes for issues found in build testing and with static
     checking on tegra, ixp4xx, imx, omap"

* tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
  soc: ixp4xx/qmgr: fix invalid __iomem access
  soc: ixp4xx: fix printing resources
  ARM: ixp4xx: goramo_mlr depends on old PCI driver
  ARM: ixp4xx: fix compile-testing soc drivers
  soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR
  ARM: dts: nomadik: Fix up interrupt controller node names
  ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM
  ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM
  ARM: dts: stm32: Prefer HW RTC on DHCOM SoM
  omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator
  ARM: dts: am437x-l4: fix typo in can@0 node
  ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218
  bus: ti-sysc: AM3: RNG is GP only
  ARM: omap2+: hwmod: fix potential NULL pointer access
  arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode
  arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers
  ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins
  ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init
  ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz
  arm64: dts: ls1028: sl28: fix networking for variant 2
  ...

Pull arm64 fixes from Will Deacon:
 "It's all pretty minor but the main fix is sorting out how we deal with
  return values from 32-bit system calls as audit expects error codes to
  be sign-extended to 64 bits

  Summary:

   - Fix extension/truncation of return values from 32-bit system calls

   - Fix interaction between unwinding and tracing

   - Fix spurious toolchain warning emitted during make

   - Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: stacktrace: avoid tracing arch_stack_walk()
  arm64: stacktrace: fix comment
  arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL
  arm64: move warning about toolchains to archprepare
  arm64: fix compat syscall return truncation

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix PMD accounting change"

* tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: check return value of pgtable_pmd_page_ctor

Pull spi fixes from Mark Brown:
 "A small collection of fixes for SPI, small mostly driver specific
  things plus a fix for module autoloading which hadn't been working
  properly for DT systems"

* tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: cadence-quadspi: Fix check condition for DTR ops
  spi: mediatek: Fix fifo transfer
  spi: imx: mx51-ecspi: Fix CONFIGREG delay comment
  spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation
  spi: update modalias_show after of_device_uevent_modalias support
  spi: meson-spicc: fix memory leak in meson_spicc_remove
  spi: spi-mux: Add module info needed for autoloading

Pull dmaengine fixes from Vinod Koul:
 "A bunch of driver fixes, notably:

   - idxd driver fixes for submission race, driver remove sequence,
     setup sequence for MSIXPERM, array index and updating descriptor
     vector

   - usb-dmac, pm reference leak fix

   - xilinx_dma, read-after-free fix

   - uniphier-xdmac fix for using atomic readl_poll_timeout_atomic()

   - of-dma, router_xlate to return

   - imx-dma, generic dma fix"

* tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: imx-dma: configure the generic DMA type to make it work
  dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available
  dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops
  dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops
  dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state
  dmaengine: idxd: fix submission race window
  dmaengine: idxd: fix sequence for pci driver remove() and shutdown()
  dmaengine: idxd: fix desc->vector that isn't being updated
  dmaengine: idxd: fix setup sequence for MSIXPERM table
  dmaengine: idxd: fix array index when int_handles are being used
  dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()
  dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers

Pull rdma fixes from Jason Gunthorpe:
 "Several small recent regressions - rather more than usual, but nothing
  too scary. Good to know people are testing.

   - Typo causing incorrect operation of the mlx5 mkey cache
     expiration

   - Revert a CM patch that is breaking some ULPs

   - Typo breaking SRQ in rxe

   - Revert a rxe patch breaking icrc calculation

   - Static checker warning about unbalanced locking in hns

   - Subtle cxgb4 regression from a recent atomic to refcount
     conversion"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/iw_cxgb4: Fix refcount underflow while destroying cqs.
  RDMA/hns: Fix the double unlock problem of poll_sem
  RDMA/rxe: Restore setting tot_len in the IPv4 header
  RDMA/rxe: Use the correct size of wqe when processing SRQ
  RDMA/cma: Revert INIT-INIT patch
  RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes:

   - A few regression fixes (PCM core fixes, USB-audio fixes)

   - Follow up fixes for the USB-audio mixer changes in this cycle

   - A long-standing ALSA sequencer race bug fix

   - Usual device-specific quirks for HD- and USB-audio"

* tag 'sound-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix racy deletion of subscriber
  ALSA: memalloc: Fix regression with SNDRV_DMA_TYPE_CONTINUOUS
  ALSA: pcm - fix mmap capability check for the snd-dummy driver
  ALSA: usb-audio: Avoid unnecessary or invalid connector selection at resume
  ALSA: hda/realtek: add mic quirk for Acer SF314-42
  ALSA: usb-audio: Add registration quirk for JBL Quantum 600
  ALSA: hda/realtek: Fix headset mic for Acer SWIFT SF314-56 (ALC256)
  ALSA: usb-audio: Fix superfluous autosuspend recovery
  ALSA: usb-audio: fix incorrect clock source setting
  ALSA: scarlett2: Fix line out/speaker switching notifications
  ALSA: scarlett2: Correct channel mute status after mute button pressed
  ALSA: scarlett2: Fix Direct Monitor control name for 2i2
  ALSA: scarlett2: Fix Mute/Dim/MSD Mode control names

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes pull, live from a Brisbane lockdown with kids at
  home.

  A big bunch of scattered amdgpu fixes, but they are all pretty small,
  minor i915 fixes, kmb, and one vmwgfx regression fixes, all pretty
  quiet for this time.

  amdgpu:
   - Fix potential out-of-bounds read when updating GPUVM mapping
   - Renoir powergating fix
   - Yellow Carp updates
   - 8K fix for navi1x
   - Beige Goby updates and new DIDs
   - Fix DMUB firmware version output
   - EDP fix
   - pmops config fix

  i915:
   - Call i915_globals_exit if pci_register_device fails
   - (follow on fix for section mismatch)
   - Correct SFC_DONE register offset

  kmb:
   - DMA fix
   - driver date/version macros

  vmwgfx:
   - Fix I/O memory access on 64-bit systems"

* tag 'drm-fixes-2021-08-06' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: add DID for beige goby
  drm/amdgpu/display: fix DMUB firmware version info
  drm/amd/display: workaround for hard hang on HPD on native DP
  drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4
  drm/amd/display: Increase stutter watermark for dcn303
  drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X
  drm/amd/display: Assume LTTPR interop for DCN31+
  drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled
  drm/amd/pm: update yellow carp pmfw interface version
  drm/i915: fix i915_globals_exit() section mismatch error
  drm/i915: Call i915_globals_exit() if pci_register_device() fails
  drm/i915: Correct SFC_DONE register offset
  drm/vmwgfx: Fix a 64bit regression on svga3
  drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir.
  drm/amdgpu: Fix out-of-bounds read when update mapping
  drm/kmb: Define driver date and major/minor version
  drm/kmb: Enable LCD DMA for low TVDDCV

Commit b5776e75 ("ext4: fix potential htree index checksum
corruption) removed a required restart when multiple levels of index
nodes need to be split.  Fix this to avoid directory htree corruptions
when using the large_dir feature.

Cc: stable@kernel.org # v5.11
Cc: Благодаренко Артём <artem.blagodarenko@gmail.com>
Fixes: b5776e75 ("ext4: fix potential htree index checksum corruption)
Reported-by: Denis <denis@voxelsoft.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

State transitions from 1->0->1 and N->2->1 callbacks require RCU
synchronization. Rather than performing the RCU synchronization every
time the state change occurs, which is quite slow when many tracepoints
are registered in batch, instead keep a snapshot of the RCU state on the
most recent transitions which belong to a chain, and conditionally wait
for a grace period on the last transition of the chain if one g.p. has
not elapsed since the last snapshot.

This applies to both RCU and SRCU.

This brings the performance regression caused by commit 231264d6
("Fix: tracepoint: static call function vs data state mismatch") back to
what it was originally.

Before this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real	0m10.593s
  user	0m0.017s
  sys	0m0.259s

After this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real	0m0.878s
  user	0m0.000s
  sys	0m0.103s

Link: https://lkml.kernel.org/r/20210805192954.30688-1-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 231264d6 ("Fix: tracepoint: static call function vs data state mismatch")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Previous atomic increment/decrement logic expects the atomic count to be
'0' after the final decrement.

Replacing atomic count with refcount does not allow that, as
refcount_dec() considers count of 1 as underflow and triggers a kernel
splat.

Fix the current refcount logic by using the usual pattern of decrementing
the refcount and test if it is '0' on the final deref in
c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event().

Fixes: 7183451f ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting")
Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.comSigned-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'amd-drm-fixes-5.14-2021-08-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.14-2021-08-05:

amdgpu:
- Fix potential out-of-bounds read when updating GPUVM mapping
- Renoir powergating fix
- Yellow Carp updates
- 8K fix for navi1x
- Beige Goby updates and new DIDs
- Fix DMUB firmware version output
- EDP fix
- pmops config fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210806011635.1055841-1-alexander.deucher@amd.com

Add device ids.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.

[How]
Disable 48mhz refclk off on native DP.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why] On S4 resume we also need to fix detection of when to reload DMCUB
firmware because we're currently using the VBIOS version which isn't
compatible with the driver version.

[How] Update the hardware init check for DCN31 since it's the ASIC that
has this issue.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Jude Shih <jude.shih@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why&How]
Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent
underflow in certain modes.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Why:
In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X
by the number of pipes ODM Combined.

How:
Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the
number of pipes ODM Combined.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Bing Guo <bing.guo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[WHY]
For DCN31 onward, LTTPR is to be enabled and set to Transparent by
VBIOS.  Driver is to assume that VBIOS has done this without needing to
check the VBIOS interop bit.

[HOW]
Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the
interop bit to true for DCN31+.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP
is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set,
PM_SLEEP is not set, so this variable cannot be used.

../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’?
    return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
           ^~~~~~~~~~~~~~~~~~~~~~~
           __KSYM_pm_suspend_target_state

Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the
2 config symbols.

Fixes: 91e27371 ("drm/amdgpu: Check pmops for desired suspend state")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-next@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Correct yellow carp driver-PMFW interface version to v4.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On a 1->0->1 callbacks transition, there is an issue with the new
callback using the old callback's data.

Considering __DO_TRACE_CALL:

        do {                                                            \
                struct tracepoint_func *it_func_ptr;                    \
                void *__data;                                           \
                it_func_ptr =                                           \
                        rcu_dereference_raw((&__tracepoint_##name)->funcs); \
                if (it_func_ptr) {                                      \
                        __data = (it_func_ptr)->data;                   \

----> [ delayed here on one CPU (e.g. vcpu preempted by the host) ]

                        static_call(tp_func_##name)(__data, args);      \
                }                                                       \
        } while (0)

It has loaded the tp->funcs of the old callback, so it will try to use the old
data. This can be fixed by adding a RCU sync anywhere in the 1->0->1
transition chain.

On a N->2->1 transition, we need an rcu-sync because you may have a
sequence of 3->2->1 (or 1->2->1) where the element 0 data is unchanged
between 2->1, but was changed from 3->2 (or from 1->2), which may be
observed by the static call. This can be fixed by adding an
unconditional RCU sync in transition 2->1.

Note, this fixes a correctness issue at the cost of adding a tremendous
performance regression to the disabling of tracepoints.

Before this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real	0m0.778s
  user	0m0.000s
  sys	0m0.061s

After this commit:

  # trace-cmd start -e all
  # time trace-cmd start -p nop

  real	0m10.593s
  user	0m0.017s
  sys	0m0.259s

A follow up fix will introduce a more lightweight scheme based on RCU
get_state and cond_sync, that will return the performance back to what it
was. As both this change and the lightweight versions are complex on their
own, for bisecting any issues that this may cause, they are kept as two
separate changes.

Link: https://lkml.kernel.org/r/20210805132717.23813-3-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: d25e37d8 ("tracepoint: Optimize using static_call()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

On transition from 2->1 callees, we should be comparing .data rather
than .func, because the same callback can be registered twice with
different data, and what we care about here is that the data of array
element 0 is unchanged to skip rcu sync.

Link: https://lkml.kernel.org/r/20210805132717.23813-2-mathieu.desnoyers@efficios.com
Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Stefan Metzmacher <metze@samba.org>
Fixes: 547305a6 ("tracepoint: Fix out of sync data passing by static caller")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec.

  Current release - regressions:

   - sched: taprio: fix init procedure to avoid inf loop when dumping

   - sctp: move the active_key update after sh_keys is added

  Current release - new code bugs:

   - sparx5: fix build with old GCC & bitmask on 32-bit targets

  Previous releases - regressions:

   - xfrm: redo the PREEMPT_RT RCU vs hash_resize_mutex deadlock fix

   - xfrm: fixes for the compat netlink attribute translator

   - phy: micrel: Fix detection of ksz87xx switch

  Previous releases - always broken:

   - gro: set inner transport header offset in tcp/udp GRO hook to avoid
     crashes when such packets reach GSO

   - vsock: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST, as required by spec

   - dsa: sja1105: fix static FDB entries on SJA1105P/Q/R/S and SJA1110

   - bridge: validate the NUD_PERMANENT bit when adding an extern_learn
     FDB entry

   - usb: lan78xx: don't modify phy_device state concurrently

   - usb: pegasus: check for errors of IO routines"

* tag 'net-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
  net: vxge: fix use-after-free in vxge_device_unregister
  net: fec: fix use-after-free in fec_drv_remove
  net: pegasus: fix uninit-value in get_interrupt_interval
  net: ethernet: ti: am65-cpsw: fix crash in am65_cpsw_port_offload_fwd_mark_update()
  bnx2x: fix an error code in bnx2x_nic_load()
  net: wwan: iosm: fix recursive lock acquire in unregister
  net: wwan: iosm: correct data protocol mask bit
  net: wwan: iosm: endianness type correction
  net: wwan: iosm: fix lkp buildbot warning
  net: usb: lan78xx: don't modify phy_device state concurrently
  docs: networking: netdevsim rules
  net: usb: pegasus: Remove the changelog and DRIVER_VERSION.
  net: usb: pegasus: Check the return value of get_geristers() and friends;
  net/prestera: Fix devlink groups leakage in error flow
  net: sched: fix lockdep_set_class() typo error for sch->seqlock
  net: dsa: qca: ar9331: reorder MDIO write sequence
  VSOCK: handle VIRTIO_VSOCK_OP_CREDIT_REQUEST
  mptcp: drop unused rcu member in mptcp_pm_addr_entry
  net: ipv6: fix returned variable type in ip6_skb_dst_mtu
  nfp: update ethtool reporting of pauseframe control
  ...

buswidth and dtr fields in spi_mem_op are only valid when the
corresponding spi_mem_op phase has a non-zero length. For example,
SPI NAND core doesn't set buswidth when using SPI_MEM_OP_NO_ADDR
phase.

Fix the dtr checks in set_protocol() and suppports_mem_op() to
ignore empty spi_mem_op phases, as checking for dtr field in
empty phase will result in false negatives.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20210716232504.182-3-a-nandan@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>

syzbot is hitting might_sleep() warning at hci_sock_dev_event() due to
calling lock_sock() with rw spinlock held [1].

It seems that history of this locking problem is a trial and error.

Commit b40df574 ("[PATCH] bluetooth: fix socket locking in
hci_sock_dev_event()") in 2.6.21-rc4 changed bh_lock_sock() to
lock_sock() as an attempt to fix lockdep warning.

Then, commit 4ce61d1c ("[BLUETOOTH]: Fix locking in
hci_sock_dev_event().") in 2.6.22-rc2 changed lock_sock() to
local_bh_disable() + bh_lock_sock_nested() as an attempt to fix the
sleep in atomic context warning.

Then, commit 4b5dd696 ("Bluetooth: Remove local_bh_disable() from
hci_sock.c") in 3.3-rc1 removed local_bh_disable().

Then, commit e305509e ("Bluetooth: use correct lock to prevent UAF
of hdev object") in 5.13-rc5 again changed bh_lock_sock_nested() to
lock_sock() as an attempt to fix CVE-2021-3573.

This difficulty comes from current implementation that
hci_sock_dev_event(HCI_DEV_UNREG) is responsible for dropping all
references from sockets because hci_unregister_dev() immediately
reclaims resources as soon as returning from
hci_sock_dev_event(HCI_DEV_UNREG).

But the history suggests that hci_sock_dev_event(HCI_DEV_UNREG) was not
doing what it should do.

Therefore, instead of trying to detach sockets from device, let's accept
not detaching sockets from device at hci_sock_dev_event(HCI_DEV_UNREG),
by moving actual cleanup of resources from hci_unregister_dev() to
hci_cleanup_dev() which is called by bt_host_release() when all
references to this unregistered device (which is a kobject) are gone.

Since hci_sock_dev_event(HCI_DEV_UNREG) no longer resets
hci_pi(sk)->hdev, we need to check whether this device was unregistered
and return an error based on HCI_UNREGISTER flag.  There might be subtle
behavioral difference in "monitor the hdev" functionality; please report
if you found something went wrong due to this patch.

Link: https://syzkaller.appspot.com/bug?extid=a5df189917e79d5e59c9 [1]
Reported-by: syzbot <syzbot+a5df189917e79d5e59c9@syzkaller.appspotmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: e305509e ("Bluetooth: use correct lock to prevent UAF of hdev object")
Acked-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull selinux fix from Paul Moore:
 "One small SELinux fix for a problem where an error code was not being
  propagated back up to userspace when a bogus SELinux policy is loaded
  into the kernel"

* tag 'selinux-pr-20210805' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: correct the return value when loads initial sids

Pull ucounts fix from Eric Biederman:
 "Fix a subtle locking versus reference counting bug in the ucount
  changes, found by syzbot"

* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Fix race condition between alloc_ucounts and put_ucounts

Pull tracing fixes from Steven Rostedt:
 "Various tracing fixes:

   - Fix NULL pointer dereference caused by an error path

   - Give histogram calculation fields a size, otherwise it breaks
     synthetic creation based on them.

   - Reject strings being used for number calculations.

   - Fix recordmcount.pl warning on llvm building RISC-V allmodconfig

   - Fix the draw_functrace.py script to handle the new trace output

   - Fix warning of smp_processor_id() in preemptible code"

* tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
  scripts/tracing: fix the bug that can't parse raw_trace_func
  scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
  tracing: Reject string operand in the histogram expression
  tracing / histogram: Give calculation hist_fields a size
  tracing: Fix NULL pointer dereference in start_creating

Pull s390 fixes from Heiko Carstens:

 - fix zstd build for -march=z900 (undefined reference to __clzdi2)

 - add missing .got.plts to vdso linker scripts to fix kpatch build
   errors

 - update defconfigs

* tag 's390-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: update defconfigs
  s390/boot: fix zstd build for -march=z900
  s390/vdso: add .got.plt in vdso linker script

Pull kvm fixes from Paolo Bonzini:
 "Mostly bugfixes; plus, support for XMM arguments to Hyper-V hypercalls
  now obeys KVM_CAP_HYPERV_ENFORCE_CPUID.

  Both the XMM arguments feature and KVM_CAP_HYPERV_ENFORCE_CPUID are
  new in 5.14, and each did not know of the other"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86/mmu: Fix per-cpu counter corruption on 32-bit builds
  KVM: selftests: fix hyperv_clock test
  KVM: SVM: improve the code readability for ASID management
  KVM: SVM: Fix off-by-one indexing when nullifying last used SEV VMCB
  KVM: Do not leak memory for duplicate debugfs directories
  KVM: selftests: Test access to XMM fast hypercalls
  KVM: x86: hyper-v: Check if guest is allowed to use XMM registers for hypercall input
  KVM: x86: Introduce trace_kvm_hv_hypercall_done()
  KVM: x86: hyper-v: Check access to hypercall before reading XMM registers
  KVM: x86: accept userspace interrupt only if no event is injected

Pull pcmcia fix from Dominik Brodowski:
 "Zheyu Ma found and fixed a null pointer dereference bug in the device
  driver for the i82092 card reader"

* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
  pcmcia: i82092: fix a null pointer dereference bug

This program always prints 4096 and hangs before the patch, and always
prints 8192 and exits successfully after:

  int main()
  {
      int pipefd[2];
      for (int i = 0; i < 1025; i++)
          if (pipe(pipefd) == -1)
              return 1;
      size_t bufsz = fcntl(pipefd[1], F_GETPIPE_SZ);
      printf("%zd\n", bufsz);
      char *buf = calloc(bufsz, 1);
      write(pipefd[1], buf, bufsz);
      read(pipefd[0], buf, bufsz-1);
      write(pipefd[1], buf, 1);
  }

Note that you may need to increase your RLIMIT_NOFILE before running the
program.

Fixes: 759c0114 ("pipe: limit the per-user amount of pages allocated in pipes")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/lkml/1628086770.5rn8p04n6j.none@localhost/
Link: https://lore.kernel.org/lkml/1628127094.lxxn016tj7.none@localhost/Signed-off-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pavel Skripkin says:

====================
net: fix use-after-free bugs

I've added new checker to smatch yesterday. It warns about using
netdev_priv() pointer after free_{netdev,candev}() call. I hope, it will
get into next smatch release.

Some of the reported bugs are fixed and upstreamed already, but Dan ran new
smatch with allmodconfig and found 2 more. Big thanks to Dan for doing it,
because I totally forgot to do it.
====================

Link: https://lore.kernel.org/r/cover.1628091954.git.paskripkin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch says:
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);
drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev);

Since vdev pointer is netdev private data accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function

Fixes: 6cca2003 ("vxge: cleanup probe error paths")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Smatch says:
	drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);
	drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev);

Since fep pointer is netdev private data, accessing it after free_netdev()
call can cause use-after-free bug. Fix it by moving free_netdev() call at
the end of the function
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: a31eda65 ("net: fec: fix clock count mis-match")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>