This patch adds a host_strip_iv_icv flag to ieee80211 which indicates that
ieee80211_rx should strip the IV/ICV/other security features from the payload.
This saves on some memmove() calls in the driver and seems like something that
belongs in the stack as it can be used by bcm43xx, ipw2200, and zd1211rw

I will submit the ipw2200 patch separately as it needs testing.

This patch also adds some sensible variable reuse (idx vs keyidx) in
ieee80211_rx
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

iNexQ UR055g: Tested by Todor T Zviskov
zd1211 chip 1435:0711 v4330 high 00-10-a7 AL2230_RF pa0 g--

ZyXEL AG-225, FCC ID SI5WUB410: Tested by Nathan
zd1211 chip 0586:3409 v4810 full 00-13-49 AL7230B_RF pa0 g---

Yakumo QuickWLAN USB: Tested by EdB
zd1211 chip 0b3b:1630 v4330 high 00-01-36 RF2959_RF pa0 ---
Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The bcm43xx-softmac driver fails to set two quantities needed for
iwlist to compute wireless quality when scanning. As a result, userland
programs using the quality to determine the best connection fail.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The rest of 8390 conversions; ifdef cascade in 8390.h is gone now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

more 8390 conversions - mac8390, zorro8390 and hydra got the same treatment
as arm etherh; one more case in 8390.h ifdef cascade is gone.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

etherh and a handful of other odd drivers use different macros when building
8390.c.  Since we generate a single 8390.o and then link with it, in any
config with both oddball and normal 8390-based driver we will end up with
breakage in at least one of them.  Solution: take most of 8390.c into
lib8390.c and have 8390.c, etherh.c and the rest of oddballs #include it.
Helper macros are taken from 8390.h to whoever includes lib8390.c.  That
way odd drivers get separate instances of compiled 8390 stuff and stop
stepping on each other's toes.  8390.h gets cleaned up - we don't have
the cascade of ifdefs in there and are left with the stuff that can be
used by any 8390-based driver.  Current problems are exactly because of
that cascade - we attempt to choose the set of helpers by looking at config
and that, of course, doesn't work well when we have several sets needed
by various drivers in our config.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add MII ioctl support to the deprecated sk98lin driver.
This allows comparison with skge driver's PHY settings.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add support for dumping the registers in the deprecated
sk98lin driver. This is allows for easier comparison with
settings in new skge driver.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

pci_module_init() convertion in olympic.c
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This was spotted by coverity (cid #793).  All callers dereference dev
before calling this functions, and we dereference it earlier in the
function, when initializing lp.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Tobias Diedrich <ranma@tdiedrich.de> sayeth:

Vanilla forcedeth doesn't seem to support suspend and an ifdown/up-cycle is
needed to get it working again after suspend.  Francois Romieu's "Awfully
experimental" patch is working just fine for me (with message signalled
interrupts disabled) and has survived quite a few suspend/resume cycles.

So I'd very much like to see (at least partial, with msi disabled)
suspend support for forcedeth in mainline.

(Addresses http://bugzilla.kernel.org/show_bug.cgi?id=6398)

Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc; Jeff Garzik <jeff@garzik.org>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 This patch fixes a couple of problems discovered with interrupt handling
in the phylib core, namely:

1. The driver uses timer and workqueue calls, but does not include
   <linux/timer.h> nor <linux/workqueue.h>.

2. The driver uses schedule_work() for handling interrupts, but does not
   make sure any pending work scheduled thus has been completed before
   driver's structures get freed from memory.  This is especially
   important as interrupts may keep arriving if the line is shared with
   another PHY.

   The solution is to ignore phy_interrupt() calls if the reported device
   has already been halted and calling flush_scheduled_work() from
   phy_stop_interrupts() (but guarded with current_is_keventd() in case
   the function has been called through keventd from the MAC device's
   close call to avoid a deadlock on the netlink lock).
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>

patch-mips-2.6.18-20060920-phy-irq-16
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 The <linux/phy.h> uses some types and macros defined in
<linux/ethtool.h>, <linux/mii.h>, <linux/timer.h> and <linux/workqueue.h>,
but fails to include these headers.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>

patch-mips-2.6.18-20060920-include-phy-16
Signed-off-by: Jeff Garzik <jeff@garzik.org>

 This patch adds support for interrupt-driven operation of the Broadcom
Gigabit Ethernet PHYs.  I have included device IDs for the parts used on
Broadcom SiByte evaluation boards; more can be added as a need arises.
They are apparently generally software-compatible with one another.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>

patch-mips-2.6.18-20060920-broadcom-phy-15
Signed-off-by: Jeff Garzik <jeff@garzik.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Fix an offset error when reading the CS89x0 ADD_PORT register
  [PATCH] spidernet: poor network performance
  [PATCH] Spidernet: remove ETH_ZLEN check in earlier patch
  [PATCH] bonding: fix an oops when slave device does not provide get_stats
  [PATCH] drivers/net: SAA9730: Fix build error
  Revert "[PATCH] zd1211rw: Removed unneeded packed attributes"
  [PATCH] zd1211rw: Fix of a locking bug
  [PATCH] softmac: remove netif_tx_disable when scanning
  [PATCH] ieee80211: Fix kernel panic when QoS is enabled

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 4
  [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 3
  [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 2
  [WATCHDOG] MIPS RM9000 on-chip watchdog device - patch 1
  [WATCHDOG] MIPS RM9000 on-chip watchdog device
  [WATCHDOG] Add iTCO vendor specific support
  [WATCHDOG] sc1200wdt.c pnp unregister fix.
  [WATCHDOG] config.h removal
  [WATCHDOG] NS pc87413-wdt Watchdog driver - fixes
  [WATCHDOG] NS pc87413-wdt Watchdog driver v1.1
  [WATCHDOG] NS pc87413-wdt Watchdog driver

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [PATCH] libata: add missing sht->slave_destroy
  [PATCH] ahci: ignore PORT_IRQ_IF_ERR on JMB controllers

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (31 commits)
  [MIPS] Remove duplicate ISA DMA code for 0 DMA channel case.
  [MIPS] Remove unused definition of cpu_to_lelongp()
  [MIPS] Remove userspace proofing from <asm/bitops.h>.
  [MIPS] Remove old junk left from old atomic_lock.
  [MIPS] Use conditional traps for BUG_ON on MIPS II and better.
  [MIPS] mips HPT cleanup: make clocksource_mips public
  [MIPS] do_IRQ cleanup
  [MIPS] Avoid dupliate D-cache flush on R400C / R4400 SC and MC variants.
  [MIPS] Remove redundant r4k_blast_icache() calls
  [MIPS] Work around bogus gcc warnings.
  [MIPS] Fix double inclusions
  [MIPS] use generic_handle_irq, handle_level_irq, handle_percpu_irq
  [MIPS] IRQ cleanups
  [MIPS] mips hpt cleanup: get rid of mips_hpt_init
  [MIPS] PB1200: Remove duplicate definitions
  [MIPS] Fix alignment hole in struct cache_desc; shrink struct.
  [MIPS] Oprofile: kernel support for the R10000.
  [MIPS] Remove unused R10000 performance counter definitions.
  [MIPS] Add support for kexec
  [MIPS] Don't print presence of WAIT instruction on bootup.
  ...

* 'for-2.6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: validate kernel object classes and permissions
  SELinux: ensure keys constant in hashtab_search
  SELinux: export object class and permission definitions
  SELinux: remove current object class and permission validation mechanism

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (25 commits)
  IB/ucm: Fix deadlock in cleanup
  IB/cm: Fix automatic path migration support
  IPoIB: Fix skb leak when freeing neighbour
  IB/srp: Fix memory leak on reconnect
  RDMA/addr: list_move() cleanups
  RDMA/addr: Fix some cancellation problems in process_req()
  RDMA/amso1100: Prevent deadlock in destroy QP
  IB/mthca: Fix initial SRQ logsize for mem-free HCAs
  IB/ehca: Use WQE offset instead of WQE addr for pending work reqs
  RDMA/iwcm: Fix comment for iwcm_deref_id() to match code
  RDMA/iwcm: Remove unnecessary function argument
  RDMA/iwcm: Remove unnecessary initializations
  RDMA/iwcm: Fix memory leak
  RDMA/iwcm: Fix memory corruption bug in cm_work_handler()
  IB: Convert kmem_cache_t -> struct kmem_cache
  IB/ipath: Fix typo in pma_counter_select subscript
  RDMA/amso1100: Fix section mismatches
  IB/mthca: Fix section mismatches
  IB/srp: Increase supported CDB size
  RDMA/cm: Remove setting local write as part of QP access flags
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits)
  usbcore: remove unused argument in autosuspend
  USB: keep count of unsuspended children
  USB hub: simplify remote-wakeup handling
  USB: struct usb_device: change flag to bitflag
  OHCI: make autostop conditional on CONFIG_PM
  USB: Add autosuspend support to the hub driver
  EHCI: Fix root-hub and port suspend/resume problems
  USB: create a new thread for every USB device found during the probe sequence
  USB: add driver for the USB debug devices
  USB: added dynamic major number for USB endpoints
  USB: pegasus error path not resetting task's state
  USB: endianness fix for asix.c
  USB: build the appledisplay driver
  USB serial: replace kmalloc+memset with kzalloc
  USB: hid-core: canonical defines for Apple USB device IDs
  USB: idmouse cleanup
  USB: make drivers/usb/core/driver.c:usb_device_match() static
  USB: lh7a40x_udc remove double declaration
  USB: pxa2xx_udc recognizes ixp425 rev b0 chip
  usbtouchscreen: add support for DMC TSC-10/25 devices
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (28 commits)
  PCI: make arch/i386/pci/common.c:pci_bf_sort static
  PCI: ibmphp_pci.c: fix NULL dereference
  pciehp: remove unnecessary pci_disable_msi
  pciehp: remove unnecessary free_irq
  PCI: rpaphp: change device tree examination
  PCI: Change memory allocation for acpiphp slots
  i2c-i801: SMBus patch for Intel ICH9
  PCI: irq: irq and pci_ids patch for Intel ICH9
  PCI: pci_{enable,disable}_device() nestable ports
  PCI: switch pci_{enable,disable}_device() to be nestable
  PCI: arch/i386/kernel/pci-dma.c: ioremap balanced with iounmap
  pci/i386: style cleanups
  PCI: Block on access to temporarily unavailable pci device
  pci: fix __pci_register_driver error handling
  pci: clear osc support flags if no _OSC method
  acpiphp: fix missing acpiphp_glue_exit()
  acpiphp: fix use of list_for_each macro
  Altix: Initial ACPI support - ROM shadowing.
  Altix: SN ACPI hotplug support.
  Altix: Add initial ACPI IO support
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (36 commits)
  Driver core: show drivers in /sys/module/
  Documentation/driver-model/platform.txt update/rewrite
  Driver core: platform_driver_probe(), can save codespace
  driver core: Use klist_remove() in device_move()
  driver core: Introduce device_move(): move a device to a new parent.
  Driver core: make drivers/base/core.c:setup_parent() static
  driver core: Introduce device_find_child().
  sysfs: sysfs_write_file() writes zero terminated data
  cpu topology: consider sysfs_create_group return value
  Driver core: Call platform_notify_remove later
  ACPI: Change ACPI to use dev_archdata instead of firmware_data
  Driver core: add dev_archdata to struct device
  Driver core: convert sound core to use struct device
  Driver core: change mem class_devices to be real devices
  Driver core: convert fb code to use struct device
  Driver core: convert firmware code to use struct device
  Driver core: convert mmc code to use struct device
  Driver core: convert ppdev code to use struct device
  Driver core: convert PPP code to use struct device
  Driver core: convert cpuid code to use struct device
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix timezone handling on stat to os/2
  [CIFS] Incorrect hardlink count when original file is cached (oplocked)

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Fix typos in drivers/isdn/hisax/isdnl2.c
  Fix typos in doc and comments
  BUG_ON conversion for fs/aio.c
  BUG_ON conversion for drivers/mmc/omap.c
  BUG_ON conversion for drivers/media/video/pwc/pwc-if.c
  Fix misc .c/.h comment typos
  Fix misc Kconfig typos
  Fix typos in /Documentation : Misc
  Fix typos in /Documentation : 'U-Z'
  Fix typos in /Documentation : 'T''
  Fix jiffies.h comment
  tabify MAINTAINERS
  fix spelling error in include/linux/kernel.h
  mqueue.h: don't include linux/types.h

Show the drivers, which belong to the module:
  $ ls -l /sys/module/usbcore/drivers/
  hub -> ../../../bus/usb/drivers/hub
  usb -> ../../../bus/usb/drivers/usb
  usbfs -> ../../../bus/usb/drivers/usbfs
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is almost a rewrite of the driver-model/platform.txt documentation;
the previous text was obsolete (for several years), evidently it never
got updated to match the change from being a PC "legacy_bus" to the more
widely used core bus for most embedded systems.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This defines a new platform_driver_probe() method allowing the driver's
probe() method, and its support code+data, to safely live in __init
sections for typical system configurations.

Many system-on-chip processors could benefit from this API, to the tune
of recovering hundreds to thousands of bytes per driver.  That's memory
which is currently wasted holding code which can never be called after
system startup, yet can not be removed.   It can't be removed because of
the linkage requirement that pointers to init section code (like, ideally,
probe support) must not live in other sections (like driver method tables)
after those pointers would be invalid.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

As pointed out by Alan Stern, device_move needs to use klist_remove which waits
until removal is complete.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Provide a function device_move() to move a device to a new parent device. Add
auxilliary functions kobject_move() and sysfs_move_dir().
kobject_move() generates a new uevent of type KOBJ_MOVE, containing the
previous path (DEVPATH_OLD) in addition to the usual values. For this, a new
interface kobject_uevent_env() is created that allows to add further
environmental data to the uevent at the kobject layer.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch makes the needlessly global setup_parent() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Introduce device_find_child() to match device_for_each_child().
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

since most of the files in sysfs are text files,
it would be nice, if the "store" function called
during sysfs_write_file() gets a zero terminated
string / data.
The current implementation seems not to ensure this.
(But only if it is the first time the zeroed buffer
page is allocated.)

So the buffer can be scanned by sscanf() easily,
for example.

This patch simply sets a \0 char behind the
data in buffer->page.
Signed-off-by: Thomas Maier <balagi@justmail.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Take return value of sysfs_create_group() into account.  That function got
called in case of CPU_ONLINE notification.  Since callbacks are not allowed
to fail on CPU_ONLINE notification do the sysfs group creation on
CPU_UP_PREPARE notification.

Also remember if creation succeeded in a bitmask.  So it's possible to know
whether it's legal to call sysfs_remove_group or not.

In addition some other minor stuff:

- since CPU_UP_PREPARE might fail add CPU_UP_CANCELED handling as well.
- use hotcpu_notifier instead of register_hotcpu_notifier.
- #ifdef code that isn't needed in the !CONFIG_HOTPLUG_CPU case.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Move the call to platform_notify_remove() to after the call to
bus_remove_device(), where it belongs.  It's bogus to notify the platform
of removal while drivers are still attached to the device and possibly
still operating since the platform might use this callback to tear down
some resources used by the driver (ACPI bits, iommu table, ...)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Change ACPI to use dev_archdata instead of firmware_data

This patch changes ACPI to use the new dev_archdata on i386, x86_64
and ia64 (is there any other arch using ACPI ?) to store it's
acpi_handle.

It also removes the firmware_data field from struct device as this
was the only user.

Only build-tested on x86
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add arch specific dev_archdata to struct device

Adds an arch specific struct dev_arch to struct device. This enables
architecture to add specific fields to every device in the system, like
DMA operation pointers, NUMA node ID, firmware specific data, etc...
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andi Kleen <ak@suse.de>
Acked-By: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Converts from using struct "class_device" to "struct device" making
everything show up properly in /sys/devices/ with symlinks from the
/sys/class directory.

It also makes the struct sound_card to show up as a "real" device
where all the different sound class devices are placed as childs
and different card attribute files can hang off of. /sys/class/sound is
still a flat directory, but the symlink targets of all devices belonging
to the same card, point the the /sys/devices tree below the new card
device object.

Thanks to Kay for the updates to this patch.
Signed-off-by: Kay Sievers <kay.sievers@novell.com>
Acked-by: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>