- 04 Aug, 2019 40 commits
-
-
Jan Harkes authored
commit 7fa0a1da upstream. Patch series "Coda updates". The following patch series is a collection of various fixes for Coda, most of which were collected from linux-fsdevel or linux-kernel but which have as yet not found their way upstream. This patch (of 22): Various file systems expect that vma->vm_file points at their own file handle, several use file_inode(vma->vm_file) to get at their inode or use vma->vm_file->private_data. However the way Coda wrapped mmap on a host file broke this assumption, vm_file was still pointing at the Coda file and the host file systems would scribble over Coda's inode and private file data. This patch fixes the incorrect expectation and wraps vm_ops->open and vm_ops->close to allow Coda to track when the vm_area_struct is destroyed so we still release the reference on the Coda file handle at the right time. [This patch differs from the original upstream patch because older stable kernels do not have the call_mmap vfs helper so we call f_ops->mmap directly.] Link: http://lkml.kernel.org/r/0e850c6e59c0b147dc2dcd51a3af004c948c3697.1558117389.git.jaharkes@cs.cmu.eduSigned-off-by:
Jan Harkes <jaharkes@cs.cmu.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Howells <dhowells@redhat.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Sam Protsenko <semen.protsenko@linaro.org> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Zhouyang Jia <jiazhouyang09@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Denis Efremov authored
[ Upstream commit da99466a ] This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver. The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls. An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted. The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function. The bug was found by syzkaller. Signed-off-by:
Denis Efremov <efremov@ispras.ru> Tested-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Denis Efremov authored
[ Upstream commit 9b04609b ] This fixes the invalid pointer dereference in the drive_name function of the floppy driver. The native_format field of the struct floppy_drive_params is used as floppy_type array index in the drive_name function. Thus, the field should be checked the same way as the autodetect field. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should be used to call the drive_name. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for a value of the native_format field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
[ Upstream commit 5635f897 ] This fixes a global out-of-bounds read access in the next_valid_format function of the floppy driver. The values from autodetect field of the struct floppy_drive_params are used as indices for the floppy_type array in the next_valid_format function 'floppy_type[DP->autodetect[probed_format]].sect'. To trigger the bug, one could use a value out of range and set the drive parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to be inserted. CAP_SYS_ADMIN is required to call FDSETDRVPRM. The patch adds the check for values of the autodetect field to be in the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices. The bug was found by syzkaller. Signed-off-by:
-
Denis Efremov authored
[ Upstream commit f3554aeb ] This fixes a divide by zero error in the setup_format_params function of the floppy driver. Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called. A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible. The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI. The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero. The bug was found by syzkaller. Signed-off-by:
-
Al Viro authored
[ Upstream commit 229b53c9 ] all other drivers recognizing those ioctls are very much *not* biarch. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Dan Williams authored
commit 7e3e888d upstream. At namespace creation time there is the potential for the "expected to be zero" fields of a 'pfn' info-block to be filled with indeterminate data. While the kernel buffer is zeroed on allocation it is immediately overwritten by nd_pfn_validate() filling it with the current contents of the on-media info-block location. For fields like, 'flags' and the 'padding' it potentially means that future implementations can not rely on those fields being zero. In preparation to stop using the 'start_pad' and 'end_trunc' fields for section alignment, arrange for fields that are not explicitly initialized to be guaranteed zero. Bump the minor version to indicate it is safe to assume the 'padding' and 'flags' are zero. Otherwise, this corruption is expected to benign since all other critical fields are explicitly initialized. Note The cc: stable is about spreading this new policy to as many kernels as possible not fixing an issue in those kernels. It is not until the change titled "libnvdimm/pfn: Stop padding pmem namespaces to section alignment" where this improper initialization becomes a problem. So if someone decides to backport "libnvdimm/pfn: Stop padding pmem namespaces to section alignment" (which is not tagged for stable), make sure this pre-requisite is flagged. Link: http://lkml.kernel.org/r/156092356065.979959.6681003754765958296.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 32ab0a3f ("libnvdimm, pmem: 'struct page' for pmem") Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> [ppc64] Cc: <stable@vger.kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jane Chu <jane.chu@oracle.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Filipe Manana authored
commit 17900668 upstream. If the range for which we are punching a hole covers only part of a page, we end up updating the inode item but we skip the update of the inode's iversion, mtime and ctime. Fix that by ensuring we update those properties of the inode. A patch for fstests test case generic/059 that tests this as been sent along with this fix. Fixes: 2aaa6655 ("Btrfs: add hole punching") Fixes: e8c1c76e ("Btrfs: add missing inode update when punching hole") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Mika Westerberg authored
commit 000dd531 upstream. PME polling does not take into account that a device that is directly connected to the host bridge may go into D3cold as well. This leads to a situation where the PME poll thread reads from a config space of a device that is in D3cold and gets incorrect information because the config space is not accessible. Here is an example from Intel Ice Lake system where two PCIe root ports are in D3cold (I've instrumented the kernel to log the PMCSR register contents): [ 62.971442] pcieport 0000:00:07.1: Check PME status, PMCSR=0xffff [ 62.971504] pcieport 0000:00:07.0: Check PME status, PMCSR=0xffff Since 0xffff is interpreted so that PME is pending, the root ports will be runtime resumed. This repeats over and over again essentially blocking all runtime power management. Prevent this from happening by checking whether the device is in D3cold before its PME status is read. Fixes: 71a83bd7 ("PCI/PM: add runtime PM support to PCIe port") Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Lukas Wunner <lukas@wunner.de> Cc: 3.6+ <stable@vger.kernel.org> # v3.6+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
YueHaibing authored
commit d4548543 upstream. KASAN report this: BUG: unable to handle kernel paging request at ffffffffa0097000 PGD 3870067 P4D 3870067 PUD 3871063 PMD 2326e2067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 5340 Comm: modprobe Not tainted 5.1.0-rc7+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_add_valid+0x10/0x70 Code: c3 48 8b 06 55 48 89 e5 5d 48 39 07 0f 94 c0 0f b6 c0 c3 90 90 90 90 90 90 90 55 48 89 d0 48 8b 52 08 48 89 e5 48 39 f2 75 19 <48> 8b 32 48 39 f0 75 3a RSP: 0018:ffffc90000e23c68 EFLAGS: 00010246 RAX: ffffffffa00ad000 RBX: ffffffffa009d000 RCX: 0000000000000000 RDX: ffffffffa0097000 RSI: ffffffffa0097000 RDI: ffffffffa009d000 RBP: ffffc90000e23c68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0097000 R13: ffff888231797180 R14: 0000000000000000 R15: ffffc90000e23e78 FS: 00007fb215285540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0097000 CR3: 000000022f144000 CR4: 00000000000006f0 Call Trace: v9fs_register_trans+0x2f/0x60 [9pnet ? 0xffffffffa0087000 p9_virtio_init+0x25/0x1000 [9pnet_virtio do_one_initcall+0x6c/0x3cc ? kmem_cache_alloc_trace+0x248/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fb214d8e839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 RSP: 002b:00007ffc96554278 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055e67eed2aa0 RCX: 00007fb214d8e839 RDX: 0000000000000000 RSI: 000055e67ce95c2e RDI: 0000000000000003 RBP: 000055e67ce95c2e R08: 0000000000000000 R09: 000055e67eed2aa0 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 000055e67eeda500 R14: 0000000000040000 R15: 000055e67eed2aa0 Modules linked in: 9pnet_virtio(+) 9pnet gre rfkill vmw_vsock_virtio_transport_common vsock [last unloaded: 9pnet_virtio CR2: ffffffffa0097000 ---[ end trace 4a52bb13ff07b761 If register_virtio_driver() fails in p9_virtio_init, we should call v9fs_unregister_trans() to do cleanup. Link: http://lkml.kernel.org/r/20190430115942.41840-1-yuehaibing@huawei.com Cc: stable@vger.kernel.org Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: b530cc79 ("9p: add virtio transport") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Dominique Martinet <dominique.martinet@cea.fr> Signed-off-by:
-
Daniel Jordan authored
commit cf144f81 upstream. Testing padata with the tcrypt module on a 5.2 kernel... # modprobe tcrypt alg="pcrypt(rfc4106(gcm(aes)))" type=3 # modprobe tcrypt mode=211 sec=1 ...produces this splat: INFO: task modprobe:10075 blocked for more than 120 seconds. Not tainted 5.2.0-base+ #16 modprobe D 0 10075 10064 0x80004080 Call Trace: ? __schedule+0x4dd/0x610 ? ring_buffer_unlock_commit+0x23/0x100 schedule+0x6c/0x90 schedule_timeout+0x3b/0x320 ? trace_buffer_unlock_commit_regs+0x4f/0x1f0 wait_for_common+0x160/0x1a0 ? wake_up_q+0x80/0x80 { crypto_wait_req } # entries in braces added by hand { do_one_aead_op } { test_aead_jiffies } test_aead_speed.constprop.17+0x681/0xf30 [tcrypt] do_test+0x4053/0x6a2b [tcrypt] ? 0xffffffffa00f4000 tcrypt_mod_init+0x50/0x1000 [tcrypt] ... The second modprobe command never finishes because in padata_reorder, CPU0's load of reorder_objects is executed before the unlocking store in spin_unlock_bh(pd->lock), causing CPU0 to miss CPU1's increment: CPU0 CPU1 padata_reorder padata_do_serial LOAD reorder_objects // 0 INC reorder_objects // 1 padata_reorder TRYLOCK pd->lock // failed UNLOCK pd->lock CPU0 deletes the timer before returning from padata_reorder and since no other job is submitted to padata, modprobe waits indefinitely. Add a pair of full barriers to guarantee proper ordering: CPU0 CPU1 padata_reorder padata_do_serial UNLOCK pd->lock smp_mb() LOAD reorder_objects INC reorder_objects smp_mb__after_atomic() padata_reorder TRYLOCK pd->lock smp_mb__after_atomic is needed so the read part of the trylock operation comes after the INC, as Andrea points out. Thanks also to Andrea for help with writing a litmus test. Fixes: 16295bec ("padata: Generic parallelization/serialization interface") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: <stable@vger.kernel.org> Cc: Andrea Parri <andrea.parri@amarulasolutions.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-arch@vger.kernel.org Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Lyude Paul authored
commit 7cb95eee upstream. It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by:
Lyude Paul <lyude@redhat.com> Tested-by:
Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Radoslaw Burny authored
commit 5ec27ec7 upstream. Normally, the inode's i_uid/i_gid are translated relative to s_user_ns, but this is not a correct behavior for proc. Since sysctl permission check in test_perm is done against GLOBAL_ROOT_[UG]ID, it makes more sense to use these values in u_[ug]id of proc inodes. In other words: although uid/gid in the inode is not read during test_perm, the inode logically belongs to the root of the namespace. I have confirmed this with Eric Biederman at LPC and in this thread: https://lore.kernel.org/lkml/87k1kzjdff.fsf@xmission.com Consequences ============ Since the i_[ug]id values of proc nodes are not used for permissions checks, this change usually makes no functional difference. However, it causes an issue in a setup where: * a namespace container is created without root user in container - hence the i_[ug]id of proc nodes are set to INVALID_[UG]ID * container creator tries to configure it by writing /proc/sys files, e.g. writing /proc/sys/kernel/shmmax to configure shared memory limit Kernel does not allow to open an inode for writing if its i_[ug]id are invalid, making it impossible to write shmmax and thus - configure the container. Using a container with no root mapping is apparently rare, but we do use this configuration at Google. Also, we use a generic tool to configure the container limits, and the inability to write any of them causes a failure. History ======= The invalid uids/gids in inodes first appeared due to 81754357 (fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns). However, AFAIK, this did not immediately cause any issues. The inability to write to these "invalid" inodes was only caused by a later commit 0bd23d09 (vfs: Don't modify inodes with a uid or gid unknown to the vfs). Tested: Used a repro program that creates a user namespace without any mapping and stat'ed /proc/$PID/root/proc/sys/kernel/shmmax from outside. Before the change, it shows the overflow uid, with the change it's 0. The overflow uid indicates that the uid in the inode is not correct and thus it is not possible to open the file for writing. Link: http://lkml.kernel.org/r/20190708115130.250149-1-rburny@google.com Fixes: 0bd23d09 ("vfs: Don't modify inodes with a uid or gid unknown to the vfs") Signed-off-by:
Radoslaw Burny <rburny@google.com> Acked-by:
Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Jon Hunter authored
commit ba24eee6 upstream. The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable@vger.kernel.org Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Fixes: bcdbde43 ("arm64: tegra: Add AGIC node for Tegra210") Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Like Xu authored
commit 6fc3977c upstream. If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Ezequiel Garcia authored
commit 766b9b16 upstream. The mutex unlock in the threaded interrupt handler is not paired with any mutex lock. Remove it. This bug has been here for a really long time, so it applies to any stable repo. Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Boris Brezillon authored
commit 07d89227 upstream. cfg->type can be overridden by v4l2_ctrl_fill() and the new value is stored in the local type var. Fix the tests to use this local var. Fixes: 0996517c ("V4L/DVB: v4l2: Add new control handling framework") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: change to !qmenu and !qmenu_int (checkpatch)] Signed-off-by:
-
Hui Wang authored
commit 4b4e0e32 upstream. Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit ede34f39 upstream. The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd80091 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Christophe Leroy authored
commit aeb87246 upstream. All mapping iterator logic is based on the assumption that sg->offset is always lower than PAGE_SIZE. But there are situations where sg->offset is such that the SG item is on the second page. In that case sg_copy_to_buffer() fails properly copying the data into the buffer. One of the reason is that the data will be outside the kmapped area used to access that data. This patch fixes the issue by adjusting the mapping iterator offset and pgoffset fields such that offset is always lower than PAGE_SIZE. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 4225fc85 ("lib/scatterlist: use page iterator in the mapping iterator") Cc: stable@vger.kernel.org Signed-off-by:
-
Trond Myklebust authored
commit 44942b4e upstream. According to the open() manpage, Linux reserves the access mode 3 to mean "check for read and write permission on the file and return a file descriptor that can't be used for reading or writing." Currently, the NFSv4 code will ask the server to open the file, and will use an incorrect share access mode of 0. Since it has an incorrect share access mode, the client later forgets to send a corresponding close, meaning it can leak stateids on the server. Fixes: ce4ef7c0 ("NFS: Split out NFS v4 file operations") Cc: stable@vger.kernel.org # 3.6+ Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Eiichi Tsukata authored
commit 46cc0b44 upstream. Current snapshot implementation swaps two ring_buffers even though their sizes are different from each other, that can cause an inconsistency between the contents of buffer_size_kb file and the current buffer size. For example: # cat buffer_size_kb 7 (expanded: 1408) # echo 1 > events/enable # grep bytes per_cpu/cpu0/stats bytes: 1441020 # echo 1 > snapshot // current:1408, spare:1408 # echo 123 > buffer_size_kb // current:123, spare:1408 # echo 1 > snapshot // current:1408, spare:123 # grep bytes per_cpu/cpu0/stats bytes: 1443700 # cat buffer_size_kb 123 // != current:1408 And also, a similar per-cpu case hits the following WARNING: Reproducer: # echo 1 > per_cpu/cpu0/snapshot # echo 123 > buffer_size_kb # echo 1 > per_cpu/cpu0/snapshot WARNING: WARNING: CPU: 0 PID: 1946 at kernel/trace/trace.c:1607 update_max_tr_single.part.0+0x2b8/0x380 Modules linked in: CPU: 0 PID: 1946 Comm: bash Not tainted 5.2.0-rc6 #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 RIP: 0010:update_max_tr_single.part.0+0x2b8/0x380 Code: ff e8 dc da f9 ff 0f 0b e9 88 fe ff ff e8 d0 da f9 ff 44 89 ee bf f5 ff ff ff e8 33 dc f9 ff 41 83 fd f5 74 96 e8 b8 da f9 ff <0f> 0b eb 8d e8 af da f9 ff 0f 0b e9 bf fd ff ff e8 a3 da f9 ff 48 RSP: 0018:ffff888063e4fca0 EFLAGS: 00010093 RAX: ffff888066214380 RBX: ffffffff99850fe0 RCX: ffffffff964298a8 RDX: 0000000000000000 RSI: 00000000fffffff5 RDI: 0000000000000005 RBP: 1ffff1100c7c9f96 R08: ffff888066214380 R09: ffffed100c7c9f9b R10: ffffed100c7c9f9a R11: 0000000000000003 R12: 0000000000000000 R13: 00000000ffffffea R14: ffff888066214380 R15: ffffffff99851060 FS: 00007f9f8173c700(0000) GS:ffff88806d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000714dc0 CR3: 0000000066fa6000 CR4: 00000000000006f0 Call Trace: ? trace_array_printk_buf+0x140/0x140 ? __mutex_lock_slowpath+0x10/0x10 tracing_snapshot_write+0x4c8/0x7f0 ? trace_printk_init_buffers+0x60/0x60 ? selinux_file_permission+0x3b/0x540 ? tracer_preempt_off+0x38/0x506 ? trace_printk_init_buffers+0x60/0x60 __vfs_write+0x81/0x100 vfs_write+0x1e1/0x560 ksys_write+0x126/0x250 ? __ia32_sys_read+0xb0/0xb0 ? do_syscall_64+0x1f/0x390 do_syscall_64+0xc1/0x390 entry_SYSCALL_64_after_hwframe+0x49/0xbe This patch adds resize_buffer_duplicate_size() to check if there is a difference between current/spare buffer sizes and resize a spare buffer if necessary. Link: http://lkml.kernel.org/r/20190625012910.13109-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: ad909e21 ("tracing: Add internal tracing_snapshot() functions") Signed-off-by:
Eiichi Tsukata <devel@etsukata.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Emmanuel Grumbach authored
commit 3b57a10c upstream. Sometimes the register status can include interrupts that were masked. We can, for example, get the RF-Kill bit set in the interrupt status register although this interrupt was masked. Then if we get the ALIVE interrupt (for example) that was not masked, we need to *not* service the RF-Kill interrupt. Fix this in the MSI-X interrupt handler. Cc: stable@vger.kernel.org Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jon Hunter authored
commit ece6031e upstream. The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which not sufficient because the enable ramp delay has been measured to be greater than 1ms. Furthermore, the downstream kernels released by NVIDIA for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of 160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be 2ms and add a settling delay of 160us. Cc: stable@vger.kernel.org Signed-off-by:
-
Krzysztof Kozlowski authored
commit 16da0eb5 upstream. On S2MPS11 device, the buck7 and buck8 regulator voltages start at 750 mV, not 600 mV. Using wrong minimal value caused shifting of these regulator values by 150 mV (e.g. buck7 usually configured to v1.35 V was reported as 1.2 V). On most of the boards these regulators are left in default state so this was only affecting reported voltage. However if any driver wanted to change them, then effectively it would set voltage 150 mV higher than intended. Cc: <stable@vger.kernel.org> Fixes: cb74685e ("regulator: s2mps11: Add samsung s2mps11 regulator driver") Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Grant Hernandez authored
commit 2a017fd8 upstream. The GTCO tablet input driver configures itself from an HID report sent via USB during the initial enumeration process. Some debugging messages are generated during the parsing. A debugging message indentation counter is not bounds checked, leading to the ability for a specially crafted HID report to cause '-' and null bytes be written past the end of the indentation array. As long as the kernel has CONFIG_DYNAMIC_DEBUG enabled, this code will not be optimized out. This was discovered during code review after a previous syzkaller bug was found in this driver. Signed-off-by:
Grant Hernandez <granthernandez@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Wen Yang authored
commit 95566aa7 upstream. There is a possible double free issue in ppc4xx_trng_probe(): 85: dev->trng_base = of_iomap(trng, 0); 86: of_node_put(trng); ---> released here 87: if (!dev->trng_base) 88: goto err_out; ... 110: ierr_out: 111: of_node_put(trng); ---> double released here ... This issue was detected by using the Coccinelle software. We fix it by removing the unnecessary of_node_put(). Fixes: 5343e674 ("crypto4xx: integrate ppc4xx-rng into crypto4xx") Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: <stable@vger.kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Allison Randal <allison@lohutok.net> Cc: Armijn Hemel <armijn@tjaldur.nl> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Eric Biggers authored
commit 7545b6c2 upstream. Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305 operation is being continued from an async completion callback, since sleeping may not be allowed in that context. This is basically the same bug that was recently fixed in the xts and lrw templates. But, it's always been broken in chacha20poly1305 too. This was found using syzkaller in combination with the updated crypto self-tests which actually test the MAY_SLEEP flag now. Reproducer: python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind( ("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))' Kernel output: BUG: sleeping function called from invalid context at include/crypto/algapi.h:426 in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2 [...] CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014 Workqueue: crypto cryptd_queue_worker Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x4d/0x6a lib/dump_stack.c:113 ___might_sleep kernel/sched/core.c:6138 [inline] ___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095 crypto_yield include/crypto/algapi.h:426 [inline] crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113 shash_ahash_update+0x41/0x60 crypto/shash.c:251 shash_async_update+0xd/0x10 crypto/shash.c:260 crypto_ahash_update include/crypto/hash.h:539 [inline] poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337 poly_init+0x51/0x60 crypto/chacha20poly1305.c:364 async_done_continue crypto/chacha20poly1305.c:78 [inline] poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369 cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279 cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339 cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184 process_one_work+0x1ed/0x420 kernel/workqueue.c:2269 worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415 kthread+0x11f/0x140 kernel/kthread.c:255 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Fixes: 71ebc4d1 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Martin Willi <martin@strongswan.org> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Elena Petrova authored
commit 6bd934de upstream. The sha256-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: the actual digest, result: initial value of SHA internal state. The error is in sha256_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha2_ce_transform to make the final round. However, in sha256_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 03802f6a ("crypto: arm64/sha2-ce - move SHA-224/256 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by:
Elena Petrova <lenaptr@google.com> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Elena Petrova authored
commit 1d4aaf16 upstream. The sha1-ce finup implementation for ARM64 produces wrong digest for empty input (len=0). Expected: da39a3ee..., result: 67452301... (initial value of SHA internal state). The error is in sha1_ce_finup: for empty data `finalize` will be 1, so the code is relying on sha1_ce_transform to make the final round. However, in sha1_base_do_update, the block function will not be called when len == 0. Fix it by setting finalize to 0 if data is empty. Fixes: 07eb54d3 ("crypto: arm64/sha1-ce - move SHA-1 ARMv8 implementation to base layer") Cc: stable@vger.kernel.org Signed-off-by:
-
Eric Biggers authored
commit 5c6bc4df upstream. Changing ghash_mod_init() to be subsys_initcall made it start running before the alignment fault handler has been installed on ARM. In kernel builds where the keys in the ghash test vectors happened to be misaligned in the kernel image, this exposed the longstanding bug that ghash_setkey() is incorrectly casting the key buffer (which can have any alignment) to be128 for passing to gf128mul_init_4k_lle(). Fix this by memcpy()ing the key to a temporary buffer. Don't fix it by setting an alignmask on the algorithm instead because that would unnecessarily force alignment of the data too. Fixes: 2cdc6899 ("crypto: ghash - Add GHASH digest algorithm for GCM") Reported-by:
Peter Robinson <pbrobinson@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Finn Thain authored
commit 7398cee4 upstream. Some targets introduce delays when handshaking the response to certain commands. For example, a disk may send a 96-byte response to an INQUIRY command (or a 24-byte response to a MODE SENSE command) too slowly. Apparently the first 12 or 14 bytes are handshaked okay but then the system bus error timeout is reached while transferring the next word. Since the scsi bus phase hasn't changed, the driver then sets the target borken flag to prevent further PDMA transfers. The driver also logs the warning, "switching to slow handshake". Raise the PDMA threshold to 512 bytes so that PIO transfers will be used for these commands. This default is sufficiently low that PDMA will still be used for READ and WRITE commands. The existing threshold (16 bytes) was chosen more or less at random. However, best performance requires the threshold to be as low as possible. Those systems that don't need the PIO workaround at all may benefit from mac_scsi.setup_use_pdma=1 Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.14+ Fixes: 3a0f64bf ("mac_scsi: Fix pseudo DMA implementation") Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Tested-by:
Stan Johnson <userm57@yahoo.com> Tested-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Finn Thain authored
commit 57f31326 upstream. The reselection interrupt gets disabled during selection and must be re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a disconnected command may time-out or the target may wedge the bus while trying to reselect the host. This can happen after a command is aborted. Fix this by enabling the reselection interrupt in NCR5380_main() after calls to NCR5380_select() and NCR5380_information_transfer() return. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.9+ Fixes: 8b00c3d5 ("ncr5380: Implement new eh_abort_handler") Signed-off-by:
-
Finn Thain authored
commit 6a162836 upstream. Replace a 'goto' statement with a simple 'return' where possible. This improves readability. No functional change. Tested-by:
-
Juergen Gross authored
commit a1078e82 upstream. Instead of trying to allocate pages with GFP_USER in add_ballooned_pages() check the available free memory via si_mem_available(). GFP_USER is far less limiting memory exhaustion than the test via si_mem_available(). This will avoid dom0 running out of memory due to excessive foreign page mappings especially on ARM and on x86 in PVH mode, as those don't have a pre-ballooned area which can be used for foreign mappings. As the normal ballooning suffers from the same problem don't balloon down more than si_mem_available() pages in one iteration. At the same time limit the default maximum number of retries. This is part of XSA-300. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit a2bed907 ] Current gtp_newlink() could be called after unregister_pernet_subsys(). gtp_newlink() uses gtp_net but it can be destroyed by unregister_pernet_subsys(). So unregister_pernet_subsys() should be called after rtnl_link_unregister(). Test commands: #SHELL 1 while : do for i in {1..5} do ./gtp-link add gtp$i & done killall gtp-link done #SHELL 2 while : do modprobe -rv gtp done Splat looks like: [ 753.176631] BUG: KASAN: use-after-free in gtp_newlink+0x9b4/0xa5c [gtp] [ 753.177722] Read of size 8 at addr ffff8880d48f2458 by task gtp-link/7126 [ 753.179082] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G W 5.2.0-rc6+ #50 [ 753.185801] Call Trace: [ 753.186264] dump_stack+0x7c/0xbb [ 753.186863] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.187583] print_address_description+0xc7/0x240 [ 753.188382] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189097] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.189846] __kasan_report+0x12a/0x16f [ 753.190542] ? gtp_newlink+0x9b4/0xa5c [gtp] [ 753.191298] kasan_report+0xe/0x20 [ 753.191893] gtp_newlink+0x9b4/0xa5c [gtp] [ 753.192580] ? __netlink_ns_capable+0xc3/0xf0 [ 753.193370] __rtnl_newlink+0xb9f/0x11b0 [ ... ] [ 753.241201] Allocated by task 7186: [ 753.241844] save_stack+0x19/0x80 [ 753.242399] __kasan_kmalloc.constprop.3+0xa0/0xd0 [ 753.243192] __kmalloc+0x13e/0x300 [ 753.243764] ops_init+0xd6/0x350 [ 753.244314] register_pernet_operations+0x249/0x6f0 [ ... ] [ 753.251770] Freed by task 7178: [ 753.252288] save_stack+0x19/0x80 [ 753.252833] __kasan_slab_free+0x111/0x150 [ 753.253962] kfree+0xc7/0x280 [ 753.254509] ops_free_list.part.11+0x1c4/0x2d0 [ 753.255241] unregister_pernet_operations+0x262/0x390 [ ... ] [ 753.285883] list_add corruption. next->prev should be prev (ffff8880d48f2458), but was ffff8880d497d878. (next. [ 753.287241] ------------[ cut here ]------------ [ 753.287794] kernel BUG at lib/list_debug.c:25! [ 753.288364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 753.289099] CPU: 0 PID: 7126 Comm: gtp-link Tainted: G B W 5.2.0-rc6+ #50 [ 753.291036] RIP: 0010:__list_add_valid+0x74/0xd0 [ 753.291589] Code: 48 39 da 75 27 48 39 f5 74 36 48 39 dd 74 31 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 d9 48b [ 753.293779] RSP: 0018:ffff8880cae8f398 EFLAGS: 00010286 [ 753.294401] RAX: 0000000000000075 RBX: ffff8880d497d878 RCX: 0000000000000000 [ 753.296260] RDX: 0000000000000075 RSI: 0000000000000008 RDI: ffffed10195d1e69 [ 753.297070] RBP: ffff8880cd250ae0 R08: ffffed101b4bff21 R09: ffffed101b4bff21 [ 753.297899] R10: 0000000000000001 R11: ffffed101b4bff20 R12: ffff8880d497d878 [ 753.298703] R13: 0000000000000000 R14: ffff8880cd250ae0 R15: ffff8880d48f2458 [ 753.299564] FS: 00007f5f79805740(0000) GS:ffff8880da400000(0000) knlGS:0000000000000000 [ 753.300533] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 753.301231] CR2: 00007fe8c7ef4f10 CR3: 00000000b71a6006 CR4: 00000000000606f0 [ 753.302183] Call Trace: [ 753.302530] gtp_newlink+0x5f6/0xa5c [gtp] [ 753.303037] ? __netlink_ns_capable+0xc3/0xf0 [ 753.303576] __rtnl_newlink+0xb9f/0x11b0 [ 753.304092] ? rtnl_link_unregister+0x230/0x230 Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 3f167e19 ] ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ #50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ #50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
-
csonsino authored
[ Upstream commit c49a8682 ] Problem: The Linux Bluetooth stack yields complete control over the BLE connection interval to the remote device. The Linux Bluetooth stack provides access to the BLE connection interval min and max values through /sys/kernel/debug/bluetooth/hci0/ conn_min_interval and /sys/kernel/debug/bluetooth/hci0/conn_max_interval. These values are used for initial BLE connections, but the remote device has the ability to request a connection parameter update. In the event that the remote side requests to change the connection interval, the Linux kernel currently only validates that the desired value is within the acceptable range in the Bluetooth specification (6 - 3200, corresponding to 7.5ms - 4000ms). There is currently no validation that the desired value requested by the remote device is within the min/max limits specified in the conn_min_interval/conn_max_interval configurations. This essentially leads to Linux yielding complete control over the connection interval to the remote device. The proposed patch adds a verification step to the connection parameter update mechanism, ensuring that the desired value is within the min/max bounds of the current connection. If the desired value is outside of the current connection min/max values, then the connection parameter update request is rejected and the negative response is returned to the remote device. Recall that the initial connection is established using the local conn_min_interval/conn_max_interval values, so this allows the Linux administrator to retain control over the BLE connection interval. The one downside that I see is that the current default Linux values for conn_min_interval and conn_max_interval typically correspond to 30ms and 50ms respectively. If this change were accepted, then it is feasible that some devices would no longer be able to negotiate to their desired connection interval values. This might be remedied by setting the default Linux conn_min_interval and conn_max_interval values to the widest supported range (6 - 3200 / 7.5ms - 4000ms). This could lead to the same behavior as the current implementation, where the remote device could request to change the connection interval value to any value that is permitted by the Bluetooth specification, and Linux would accept the desired value. Signed-off-by:
Carey Sonsino <csonsino@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Matias Karhumaa authored
[ Upstream commit 28261da8 ] Because of both sides doing L2CAP disconnection at the same time, it was possible to receive L2CAP Disconnection Response with CID that was already freed. That caused problems if CID was already reused and L2CAP Connection Request with same CID was sent out. Before this patch kernel deleted channel context regardless of the state of the channel. Example where leftover Disconnection Response (frame #402) causes local device to delete L2CAP channel which was not yet connected. This in turn confuses remote device's stack because same CID is re-used without properly disconnecting. Btmon capture before patch: ** snip ** > ACL Data RX: Handle 43 flags 0x02 dlen 8 #394 [hci1] 10.748949 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #395 [hci1] 10.749062 Channel: 65 len 4 [PSM 3 mode 0] {chan 2} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #396 [hci1] 10.749073 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Packets (0x13) plen 5 #397 [hci1] 10.752391 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Packets (0x13) plen 5 #398 [hci1] 10.753394 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #399 [hci1] 10.756499 L2CAP: Disconnection Request (0x06) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #400 [hci1] 10.756548 L2CAP: Disconnection Response (0x07) ident 26 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #401 [hci1] 10.757459 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #402 [hci1] 10.759148 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 = bluetoothd: 00:1E:AB:4C:56:54: error updating services: Input/o.. 10.759447 > HCI Event: Number of Completed Packets (0x13) plen 5 #403 [hci1] 10.759386 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #404 [hci1] 10.760397 L2CAP: Connection Request (0x02) ident 27 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #405 [hci1] 10.760441 L2CAP: Connection Response (0x03) ident 27 len 8 Destination CID: 65 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #406 [hci1] 10.760449 L2CAP: Configure Request (0x04) ident 19 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > HCI Event: Number of Completed Packets (0x13) plen 5 #407 [hci1] 10.761399 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #408 [hci1] 10.762942 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Similar case after the patch: *snip* > ACL Data RX: Handle 43 flags 0x02 dlen 8 #22702 [hci0] 1664.411056 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Disconnect (DISC) (0x43) Address: 0x03 cr 1 dlci 0x00 Control: 0x53 poll/final 1 Length: 0 FCS: 0xfd < ACL Data TX: Handle 43 flags 0x00 dlen 8 #22703 [hci0] 1664.411136 Channel: 65 len 4 [PSM 3 mode 0] {chan 3} RFCOMM: Unnumbered Ack (UA) (0x63) Address: 0x03 cr 1 dlci 0x00 Control: 0x73 poll/final 1 Length: 0 FCS: 0xd7 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22704 [hci0] 1664.411143 L2CAP: Disconnection Request (0x06) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22705 [hci0] 1664.414009 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22706 [hci0] 1664.415007 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22707 [hci0] 1664.418674 L2CAP: Disconnection Request (0x06) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22708 [hci0] 1664.418762 L2CAP: Disconnection Response (0x07) ident 17 len 4 Destination CID: 65 Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 12 #22709 [hci0] 1664.421073 L2CAP: Connection Request (0x02) ident 12 len 4 PSM: 1 (0x0001) Source CID: 65 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22710 [hci0] 1664.421371 L2CAP: Disconnection Response (0x07) ident 11 len 4 Destination CID: 65 Source CID: 65 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22711 [hci0] 1664.424082 Num handles: 1 Handle: 43 Count: 1 > HCI Event: Number of Completed Pac.. (0x13) plen 5 #22712 [hci0] 1664.425040 Num handles: 1 Handle: 43 Count: 1 > ACL Data RX: Handle 43 flags 0x02 dlen 12 #22713 [hci0] 1664.426103 L2CAP: Connection Request (0x02) ident 18 len 4 PSM: 3 (0x0003) Source CID: 65 < ACL Data TX: Handle 43 flags 0x00 dlen 16 #22714 [hci0] 1664.426186 L2CAP: Connection Response (0x03) ident 18 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) < ACL Data TX: Handle 43 flags 0x00 dlen 27 #22715 [hci0] 1664.426196 L2CAP: Configure Request (0x04) ident 13 len 19 Destination CID: 65 Flags: 0x0000 Option: Maximum Transmission Unit (0x01) [mandatory] MTU: 1013 Option: Retransmission and Flow Control (0x04) [mandatory] Mode: Basic (0x00) TX window size: 0 Max transmit: 0 Retransmission timeout: 0 Monitor timeout: 0 Maximum PDU size: 0 > ACL Data RX: Handle 43 flags 0x02 dlen 16 #22716 [hci0] 1664.428804 L2CAP: Connection Response (0x03) ident 12 len 8 Destination CID: 66 Source CID: 65 Result: Connection successful (0x0000) Status: No further information available (0x0000) *snip* Fix is to check that channel is in state BT_DISCONN before deleting the channel. This bug was found while fuzzing Bluez's OBEX implementation using Synopsys Defensics. Reported-by:
Matti Kamunen <matti.kamunen@synopsys.com> Reported-by:
Ari Timonen <ari.timonen@synopsys.com> Signed-off-by:
Matias Karhumaa <matias.karhumaa@gmail.com> Signed-off-by:
-
Josua Mayer authored
[ Upstream commit b188b032 ] Handle overlooked case where the target address is assigned to a peer and neither route nor gateway exist. For one peer, no checks are performed to see if it is meant to receive packets for a given address. As soon as there is a second peer however, checks are performed to deal with routes and gateways for handling complex setups with multiple hops to a target address. This logic assumed that no route and no gateway imply that the destination address can not be reached, which is false in case of a direct peer. Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Tested-by:
Michael Scott <mike@foundries.io> Signed-off-by:
Josua Mayer <josua.mayer@jm0.eu> Signed-off-by:
-
