- 29 Nov, 2021 11 commits
-
-
Christophe Leroy authored
module_trampoline_target() is used by __ftrace_modify_call(). Implement it for PPC32 so that CONFIG_DYNAMIC_FTRACE_WITH_REGS can be activated on PPC32 as well. Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/42345f464fb465f0fc76f3090e250be8fc1729f0.1635423081.git.christophe.leroy@csgroup.eu
-
Christophe Leroy authored
All functions calling _mcount do it exactly the same way, with the following sequence of instructions: c07de788: 7c 08 02 a6 mflr r0 c07de78c: 90 01 00 04 stw r0,4(r1) c07de790: 4b 84 13 65 bl c001faf4 <_mcount> Allthough LR is pushed on stack, it is still in r0 while entering _mcount(). Function arguments are in r3-r10, so r11 and r12 are still available at that point. Do like PPC64 and use r12 to move LR into CTR, so that r0 is preserved and doesn't need to be restored from the stack. While at it, bring back the EXPORT_SYMBOL at the end of _mcount. Signed-off-by:
-
Michael Ellerman authored
Prior to commit b1923caa ("powerpc: Merge 32-bit and 64-bit setup_arch()") probe_machine() was called from setup_32/64.c and lived in setup-common.c. But now it's only called from setup-common.c so it can be static and __init, and we don't need the declaration in machdep.h either. Signed-off-by:
-
Michael Ellerman authored
setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled. Fixes the following W=1 warning when CONFIG_PROFILING=n: linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’ Signed-off-by:
-
Michael Ellerman authored
Building with W=1 we see a warning: linux/arch/powerpc/mm/nohash/fsl_book3e.c:63:15: error: no previous prototype for ‘tlbcam_sz’ tlbcam_sz() is not used outside this file, so we can make it static. However it's only used inside #ifdef CONFIG_PPC32, so move it within that ifdef, otherwise we would get a defined but not used error. Signed-off-by:
-
Michael Ellerman authored
To fix the W=1 warning: linux/arch/powerpc/platforms/85xx/c293pcie.c:22:13: error: no previous prototype for ‘c293_pcie_pic_init’ Signed-off-by:
-
Michael Ellerman authored
To fix the W=1 warning: arch/powerpc/platforms/85xx/smp.c:369:6: error: no previous prototype for ‘mpc85xx_smp_kexec_cpu_down’ Signed-off-by:
-
Michael Ellerman authored
Fixes the following W=1 warning: arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc' Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Nicholas Piggin authored
Some core kernel code starts to go beyond the 2048 byte stack size warning at NR_CPUS=8192, so select CPUMASK_OFFSTACK in that case. x86 does similarly for very large NR_CPUS. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Nicholas Piggin authored
This function builds the cores online map with on-stack cpumasks which can cause high stack usage with large NR_CPUS. It is not used in any performance sensitive paths, so instead just check for first thread sibling. Signed-off-by:
Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by:
-
Michael Ellerman authored
This reverts commit 8b8a8f0a. As reported[1] by Sachin this causes problems with ftrace, and it also causes the code patching selftests to fail as reported[2] by Stephen. So revert it for now. 1: https://lore.kernel.org/linuxppc-dev/3668743C-09DF-4673-B15C-2FFE2A57F7D7@linux.vnet.ibm.com/ 2: https://lore.kernel.org/linuxppc-dev/20211126161747.1f7795b0@canb.auug.org.au/Signed-off-by:
-
- 25 Nov, 2021 29 commits
-
-
Nicholas Piggin authored
wd_smp_last_reset_tb now gets reset by watchdog_smp_panic() as part of marking CPUs stuck and removing them from the pending mask before it begins any printing. This causes last reset times reported to be off. Fix this by reading it into a local variable before it gets reset. Fixes: 76521c4b ("powerpc/watchdog: Avoid holding wd_smp_lock over printk and smp_send_nmi_ipi") Signed-off-by:
-
Michael Ellerman authored
Make microwatt_get_random_darn() static, because it can be. Reported-by:
-
Nicholas Piggin authored
When taking watchdog actions, printing messages, comparing and re-setting wd_smp_last_reset_tb, etc., read TB close to the point of use and under wd_smp_lock or printing lock (if applicable). This should keep timebase mostly monotonic with kernel log messages, and could prevent (in theory) a laggy CPU updating wd_smp_last_reset_tb to something a long way in the past, and causing other CPUs to appear to be stuck. These additional TB reads are all slowpath (lockup has been detected), so performance does not matter. Signed-off-by:
Laurent Dufour <ldufour@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
There is a deadlock with the console_owner lock and the wd_smp_lock: CPU x takes the console_owner lock CPU y takes a watchdog timer interrupt and takes __wd_smp_lock CPU x takes a soft-NMI interrupt, detects deadlock, spins on __wd_smp_lock CPU y detects deadlock, tries to print something and spins on console_owner -> deadlock Change the watchdog locking scheme so wd_smp_lock protects the watchdog internal data, but "reporting" (printing, issuing NMI IPIs, taking any action outside of watchdog) uses a non-waiting exclusion. If a CPU detects a problem but can not take the reporting lock, it just returns because something else is already reporting. It will try again at some point. Typically hard lockup watchdog report usefulness is not impacted due to failure to spewing a large enough amount of data in as short a time as possible, but by messages getting garbled. Laurent debugged this and found the deadlock, and this patch is based on his general approach to avoid expensive operations while holding the lock. With the addition of the reporting exclusion. Signed-off-by:
-
Nicholas Piggin authored
Most updates to wd_smp_cpus_pending are under lock except the watchdog interrupt bit clear. This can race with non-atomic RMW updates to the mask under lock, which can happen in two instances: Firstly, if another CPU detects this one is stuck, removes it from the mask, mask becomes empty and is re-filled with non-atomic stores. This is okay because it would re-fill the mask with this CPU's bit clear anyway (because this CPU is now stuck), so it doesn't matter that the bit clear update got "lost". Add a comment for this. Secondly, if another CPU detects a different CPU is stuck and removes it from the pending mask with a non-atomic store to bytes which also include the bit of this CPU. This case can result in the bit clear being lost and the end result being the bit is set. This should be so rare it hardly matters, but to make things simpler to reason about just avoid the non-atomic access for that case. Signed-off-by:
-
Nicholas Piggin authored
It is possible for all CPUs to miss the pending cpumask becoming clear, and then nobody resetting it, which will cause the lockup detector to stop working. It will eventually expire, but watchdog_smp_panic will avoid doing anything if the pending mask is clear and it will never be reset. Order the cpumask clear vs the subsequent test to close this race. Add an extra check for an empty pending mask when the watchdog fires and finds its bit still clear, to try to catch any other possible races or bugs here and keep the watchdog working. The extra test in arch_touch_nmi_watchdog is required to prevent the new warning from firing off. Signed-off-by:
-
Peiwei Hu authored
prom_getprop() can return PROM_ERROR. Binary operator can not identify it. Fixes: 94d2dde7 ("[POWERPC] Efika: prune fixups and make them more carefull") Signed-off-by:
Peiwei Hu <jlu.hpw@foxmail.com> Signed-off-by:
-
Nathan Lynch authored
Provide API documentation for rtas_busy_delay_time(), explaining why we return the same value for 9900 and -2. Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
Generally RTAS cannot block, and in PAPR it is required to return control to the OS within a few tens of microseconds. In order to support operations which may take longer to complete, many RTAS primitives can return intermediate -2 ("busy") or 990x ("extended delay") values, which indicate that the OS should reattempt the same call with the same arguments at some point in the future. Current versions of PAPR are less than clear about this, but the intended meanings of these values in more detail are: RTAS_BUSY (-2): RTAS has suspended a potentially long-running operation in order to meet its latency obligation and give the OS the opportunity to perform other work. RTAS can resume making progress as soon as the OS reattempts the call. RTAS_EXTENDED_DELAY_{MIN...MAX} (9900-9905): RTAS must wait for an external event to occur or for internal contention to resolve before it can complete the requested operation. The value encodes a non-binding hint as to roughly how long the OS should wait before calling again, but the OS is allowed to reattempt the call sooner or even immediately. Linux of course must take its own CPU scheduling obligations into account when handling these statuses; e.g. a task which receives an RTAS_BUSY status should check whether to reschedule before it attempts the RTAS call again to avoid starving other tasks. rtas_busy_delay() is a helper function that "consumes" a busy or extended delay status. Common usage: int rc; do { rc = rtas_call(rtas_token("some-function"), ...); } while (rtas_busy_delay(rc)); /* convert rc to Linux error value, etc */ If rc is a busy or extended delay status, the caller can rely on rtas_busy_delay() to perform an appropriate sleep or reschedule and return nonzero. Other statuses are handled normally by the caller. The current implementation of rtas_busy_delay() both oversleeps and overuses the CPU: * It performs msleep() for all 990x and even when no delay is suggested (-2), but this is understood to actually sleep for two jiffies minimum in practice (20ms with HZ=100). 9900 (1ms) and 9901 (10ms) appear to be the most common extended delay statuses, and the oversleeping measurably lengthens DLPAR operations, which perform many RTAS calls. * It does not sleep on 990x unless need_resched() is true, causing code like the loop above to needlessly retry, wasting CPU time. Alter the logic to align better with the intended meanings: * When passed RTAS_BUSY, perform cond_resched() and return without sleeping. The caller should reattempt immediately * Always sleep when passed an extended delay status, using usleep_range() for precise shorter sleeps. Limit the sleep time to one second even though there are higher architected values. Change rtas_busy_delay()'s return type to bool to better reflect its usage, and add kernel-doc. rtas_busy_delay_time() is unchanged, even though it "incorrectly" returns 1 for RTAS_BUSY. There are users of that API with open-coded delay loops in sensitive contexts that will have to be taken on an individual basis. Brief results for addition and removal of 5GB memory on a small P9 PowerVM partition follow. Load was generated with stress-ng --cpu N. For add, elapsed time is greatly reduced without significant change in the number of RTAS calls or time spent on CPU. For remove, elapsed time is modestly reduced, with significant reductions in RTAS calls and time spent on CPU. With no competing workload (- before, + after): Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs): - 1,935 probe:rtas_call # 0.003 M/sec ( +- 0.22% ) - 609.99 msec task-clock # 0.183 CPUs utilized ( +- 0.19% ) + 1,956 probe:rtas_call # 0.003 M/sec ( +- 0.17% ) + 618.56 msec task-clock # 0.278 CPUs utilized ( +- 0.11% ) - 3.3322 +- 0.0670 seconds time elapsed ( +- 2.01% ) + 2.2222 +- 0.0416 seconds time elapsed ( +- 1.87% ) Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs): - 6,224 probe:rtas_call # 0.008 M/sec ( +- 2.57% ) - 750.36 msec task-clock # 0.190 CPUs utilized ( +- 2.01% ) + 843 probe:rtas_call # 0.003 M/sec ( +- 0.12% ) + 250.66 msec task-clock # 0.068 CPUs utilized ( +- 0.17% ) - 3.9394 +- 0.0890 seconds time elapsed ( +- 2.26% ) + 3.678 +- 0.113 seconds time elapsed ( +- 3.07% ) With all CPUs 100% busy (- before, + after): Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs): - 2,979 probe:rtas_call # 0.003 M/sec ( +- 0.12% ) - 1,096.62 msec task-clock # 0.105 CPUs utilized ( +- 0.10% ) + 2,981 probe:rtas_call # 0.003 M/sec ( +- 0.22% ) + 1,095.26 msec task-clock # 0.154 CPUs utilized ( +- 0.21% ) - 10.476 +- 0.104 seconds time elapsed ( +- 1.00% ) + 7.1124 +- 0.0865 seconds time elapsed ( +- 1.22% ) Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs): - 2,702 probe:rtas_call # 0.004 M/sec ( +- 4.00% ) - 722.71 msec task-clock # 0.067 CPUs utilized ( +- 2.41% ) + 1,246 probe:rtas_call # 0.003 M/sec ( +- 0.25% ) + 487.73 msec task-clock # 0.049 CPUs utilized ( +- 0.20% ) - 10.829 +- 0.163 seconds time elapsed ( +- 1.51% ) + 9.9887 +- 0.0866 seconds time elapsed ( +- 0.87% ) Signed-off-by: -
Nathan Lynch authored
Remove the pseries scanlog driver. This code supports functions from Power4-era servers that are not present on targets currently supported by arch/powerpc. System manuals from this time have this description: Scan Dump data is a set of chip data that the service processor gathers after a system malfunction. It consists of chip scan rings, chip trace arrays, and Scan COM (SCOM) registers. This data is stored in the scan-log partition of the system’s Nonvolatile Random Access Memory (NVRAM). PowerVM partition firmware development doesn't recognize the associated function call or property, and they don't see any references to them in their codebase. It seems to have been specific to non-virtualized pseries. References: Historical Linux commit from February 2003 (interesting to note this seems to be the source of non-GPL exports for rtas_call etc): https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb IntelliStation and pSeries docs which refer to the feature: http://ps-2.retropc.se/basil.holloway/ALL%20PDF/380635.pdf http://ps-2.kev009.com/rs6000/manuals/p/p615-6C3-6E3/6C3_and_6E3_Users_Guide_SA38-0629.pdfSigned-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Nathan Lynch authored
Fix the following issues reported by kernel-doc: $ scripts/kernel-doc -v -none arch/powerpc/kernel/rtas.c arch/powerpc/kernel/rtas.c:810: info: Scanning doc for function rtas_activate_firmware arch/powerpc/kernel/rtas.c:818: warning: contents before sections arch/powerpc/kernel/rtas.c:841: info: Scanning doc for function rtas_call_reentrant arch/powerpc/kernel/rtas.c:893: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Find a specific pseries error log in an RTAS extended event log. Signed-off-by:
-
Christophe Leroy authored
Today, patch_instruction() assumes that it is called exclusively on valid addresses, and only checks that it is not called on an init address after init section has been freed. Improve verification by calling kernel_text_address() instead. kernel_text_address() already includes a verification of initmem release. Signed-off-by:
-
Jason Wang authored
EXPORT_SYMBOL(foo); should immediately follow its function/variable. Signed-off-by:
Jason Wang <wangborong@cdjrlc.com> Signed-off-by:
-
Hari Bathini authored
With KUAP enabled, any kernel code which wants to access userspace needs to be surrounded by disable-enable KUAP. But that is not happening for BPF_PROBE_MEM load instruction. Though PPC32 does not support read protection, considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM mode) could either be a valid kernel pointer or NULL but should never be a pointer to userspace address, execute BPF_PROBE_MEM load only if addr is kernel address, otherwise set dst_reg=0 and move on. This will catch NULL, valid or invalid userspace pointers. Only bad kernel pointer will be handled by BPF exception table. [Alexei suggested for x86] Suggested-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Reviewed-by:
-
Hari Bathini authored
BPF load instruction with BPF_PROBE_MEM mode can cause a fault inside kernel. Append exception table for such instructions within BPF program. Unlike other archs which uses extable 'fixup' field to pass dest_reg and nip, BPF exception table on PowerPC follows the generic PowerPC exception table design, where it populates both fixup and extable sections within BPF program. fixup section contains 3 instructions, first 2 instructions clear dest_reg (lower & higher 32-bit registers) and last instruction jumps to next instruction in the BPF code. extable 'insn' field contains relative offset of the instruction and 'fixup' field contains relative offset of the fixup entry. Example layout of BPF program with extable present: +------------------+ | | | | 0x4020 -->| lwz r28,4(r4) | | | | | 0x40ac -->| lwz r3,0(r24) | | lwz r4,4(r24) | | | | | |------------------| 0x4278 -->| li r28,0 | \ | li r27,0 | | fixup entry | b 0x4024 | / 0x4284 -->| li r4,0 | | li r3,0 | | b 0x40b4 | |------------------| 0x4290 -->| insn=0xfffffd90 | \ extable entry | fixup=0xffffffe4 | / 0x4298 -->| insn=0xfffffe14 | | fixup=0xffffffe8 | +------------------+ (Addresses shown here are chosen random, not real) Signed-off-by: -
Ravi Bangoria authored
On PPC64 with KUAP enabled, any kernel code which wants to access userspace needs to be surrounded by disable-enable KUAP. But that is not happening for BPF_PROBE_MEM load instruction. So, when BPF program tries to access invalid userspace address, page-fault handler considers it as bad KUAP fault: Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0) Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM mode) could either be a valid kernel pointer or NULL but should never be a pointer to userspace address, execute BPF_PROBE_MEM load only if addr is kernel address, otherwise set dst_reg=0 and move on. This will catch NULL, valid or invalid userspace pointers. Only bad kernel pointer will be handled by BPF exception table. [Alexei suggested for x86] Suggested-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
BPF load instruction with BPF_PROBE_MEM mode can cause a fault inside kernel. Append exception table for such instructions within BPF program. Unlike other archs which uses extable 'fixup' field to pass dest_reg and nip, BPF exception table on PowerPC follows the generic PowerPC exception table design, where it populates both fixup and extable sections within BPF program. fixup section contains two instructions, first instruction clears dest_reg and 2nd jumps to next instruction in the BPF code. extable 'insn' field contains relative offset of the instruction and 'fixup' field contains relative offset of the fixup entry. Example layout of BPF program with extable present: +------------------+ | | | | 0x4020 -->| ld r27,4(r3) | | | | | 0x40ac -->| lwz r3,0(r4) | | | | | |------------------| 0x4280 -->| li r27,0 | \ fixup entry | b 0x4024 | / 0x4288 -->| li r3,0 | | b 0x40b0 | |------------------| 0x4290 -->| insn=0xfffffd90 | \ extable entry | fixup=0xffffffec | / 0x4298 -->| insn=0xfffffe14 | | fixup=0xffffffec | +------------------+ (Addresses shown here are chosen random, not real) Signed-off-by: -
Hari Bathini authored
Define and use PPC_RAW_BRANCH() macro instead of open coding it. This macro is used while adding BPF_PROBE_MEM support. Signed-off-by:
-
Hari Bathini authored
Refactor powerpc LDX JITing code to simplify adding BPF_PROBE_MEM support. Signed-off-by:
-
Ravi Bangoria authored
In case of extra_pass, usual JIT passes are always skipped. So, extra_pass is always false while calling bpf_jit_build_body() and can be removed. Signed-off-by:
-
Ravi Bangoria authored
SEEN_STACK is unused on PowerPC. Remove it. Also, have SEEN_TAILCALL use 0x40000000. Signed-off-by:
-
Oliver O'Halloran authored
The EEH recovery logic in eeh_handle_normal_event() has some pretty strange flow control. If we remove all the actual recovery logic we're left with the following skeleton: if (result != PCI_ERS_RESULT_DISCONNECT) { ... } if (result != PCI_ERS_RESULT_DISCONNECT) { ... } if (result == PCI_ERS_RESULT_NONE) { ... } if (result == PCI_ERS_RESULT_CAN_RECOVER) { ... } if (result == PCI_ERS_RESULT_CAN_RECOVER) { ... } if (result == PCI_ERS_RESULT_NEED_RESET) { ... } if ((result == PCI_ERS_RESULT_RECOVERED) || (result == PCI_ERS_RESULT_NONE)) { ... goto out; } /* * unsuccessful recovery / PCI_ERS_RESULT_DISCONECTED * handling is here. */ ... out: ... Most of the "if () { ... }" blocks above change "result" to PCI_ERS_RESULT_DISCONNECTED if an error occurs in that recovery step. This makes the control flow a bit confusing since it breaks the early-exit pattern that is generally used in Linux. In any case we end up handling the error in the final else block so why not just jump there directly? Doing so also allows us to de-indent a bunch of code. No functional changes. [dja: rebase on top of linux-next + my preceeding refactor, move clearing the EEH_DEV_NO_HANDLER bit above the first goto so that it is always clear in the error handler code as it was before.] Signed-off-by:Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
Daniel Axtens <dja@axtens.net> Signed-off-by:
-
Daniel Axtens authored
The control flow of eeh_handle_normal_event() is a bit tricky. Break out one of the error handling paths - rather than be in an else block, we'll make it part of the regular body of the function and put a 'goto out;' in the true limb of the if. Signed-off-by:
-
Cédric Le Goater authored
On POWER10, the automatic "save & restore" of interrupt context is always available. Provide a way to deactivate it for tests or performance. Signed-off-by:
Cédric Le Goater <clg@kaod.org> Signed-off-by:
-
Cédric Le Goater authored
StoreEOI is activated by default on platforms supporting the feature (POWER10) and will be used as soon as firmware advertises its availability. The kernel parameter provides a way to deactivate its use. It can be still be reactivated through debugfs. Signed-off-by:
-
Cédric Le Goater authored
It can be used to deactivate temporarily StoreEOI for tests or performance on platforms supporting the feature (POWER10) Signed-off-by:
-
Cédric Le Goater authored
The XIVE driver under Linux uses a single interrupt priority and only one event queue is configured per CPU. Expose the contents under a 'xive/eqs/cpuX' debugfs file. Signed-off-by:
-
Cédric Le Goater authored
and remove the EQ entries output which is not very useful since only the next two events of the queue are taken into account. We will improve the dump of the EQ in the next patches. Signed-off-by:
-
Cédric Le Goater authored
Use a 'cpus' file to dump CPU states and 'interrupts' to dump IRQ states. Signed-off-by:
-
