- 04 May, 2018 6 commits
-
-
Lorenzo Bianconi authored
Add leftover filter coefficients in IIR rssi estimation Fixes: 7bc04215 ("mt76: add driver code for MT76x2e") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Colin Ian King authored
Trivial fix to spelling mistake in module parameter description text Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lorenzo Bianconi authored
Remove unnecessary break statement in the default case of bw switch block in mt76x2_mac_process_tx_rate routine Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in RT_TRACE message text. Signed-off-by:
-
Stanislaw Gruszka authored
We have check if queue is not empty when start flushing queues on by mac80211 callback, but we also can start flushing queues by internal driver calls. So move check into rt2x00queue_flush_queue() to assure we do not flush empty queue anytime. Additionally add warning if we start to kick empty queue as in such situation we set wrong index in the HW queue, what can confuse the HW and have various negative consequences. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
Only rt2800 subdriver of rt2x00 implement sta_add() and sta_remove(), we do not need generic version of those. Signed-off-by:
-
- 30 Apr, 2018 23 commits
-
-
Franky Lin authored
Revision 7 of PCIe dongle interface increases the item size of tx and rx complete rings to accommodate extra payload for new feature. This patch simply bump up the size of these two rings without adding the support for utilizing the new space. This makes brcmfmac compatible with rev7 firmware. Reviewed-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
-
Franky Lin authored
A hostready signal is introduced to inform firmware through mailbox doorbell1 when common ring initialized or D3 exited. Reviewed-by:
-
Arend Van Spriel authored
The information in the firmware mapping does not need to be modified so it can be static const. Reviewed-by:
Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by:
-
Franky Lin authored
The enum nl80211_band used to retrieve wiphy->bands is the same as wiphy->bands->band which is checked by wiphy_register(). So it can be used directly as parameter of ieee80211_channel_to_frequency(). Reviewed-by:
-
Franky Lin authored
Provides a timestamp in bss information so user space can see when the bss info was updated. Since tsf is not available from the dongle events boottime is reported instead. Reported-by:
Dmitry Shmidt <dimitrysh@google.com> Reviewed-by:
-
Arend Van Spriel authored
The mac address for p2pdev must be different from the primary interface due to firmware requirement. Add an explicit check for this requirement if user-space provides a mac address. Reviewed-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in comment and in the ord_data text Signed-off-by:
-
Colin Ian King authored
Rename several macros that contain mispellings of UNKNOWN Signed-off-by:
-
Gustavo A. R. Silva authored
There is a potential execution path in which variable ret is returned without being properly initialized previously. Fix this by storing the value returned by function rsi_usb_master_reg_write into _ret_. Addresses-Coverity-ID: 1468407 ("Uninitialized scalar variable") Fixes: 16d3bb7b ("rsi: disable fw watchdog timer during reset") Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Function rsi_hal_key_config returns before reaching code at line 922 if (status), hence this code is structurally dead. Fix this by storing the value returned by rsi_hal_load_key into _status_ for its further evaluation and use. Addresses-Coverity-ID: 1468409 ("Structurally dead code") Fixes: 4fd6c476 ("rsi: roaming enhancements") Signed-off-by: -
Eyal Reizer authored
pm_runtime handles sdio power on and power off transitions. An old workaround for trying to control the power explicitly from the driver was in fact causing failures on suspend/resume as the mmc layer already power the module on resume. In case of resume pm_runtime_get sync returns a positive device's usage count causing the driver to try an re-initialize an already initialized device. This was causing sdio bus failure on resume. Remove this manual power on/off sequence as it is in-fact not needed. Signed-off-by:
Eyal Reizer <eyalr@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Jia-Ju Bai authored
dma_tx_fragment() is never called in atomic context. dma_tx_fragment() is only called by b43legacy_dma_tx(), which is only called by b43legacy_tx_work(). b43legacy_tx_work() is only set a parameter of INIT_WORK() in b43legacy_wireless_init(). Despite never getting called from atomic context, dma_tx_fragment() calls alloc_skb() with GFP_ATOMIC, which does not sleep for allocation. GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL, which can sleep and improve the possibility of sucessful allocation. This is found by a static analysis tool named DCNS written by myself. And I also manually check it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Xinming Hu authored
During changing virtual interface, keep using previous net device mac address. Signed-off-by:
Xinming Hu <huxm@marvell.com> Signed-off-by:
-
Xinming Hu authored
When interface type changed, firmware using a new connction pointer. We need Re-configure the mac address. Signed-off-by:
-
Xinming Hu authored
For user configurated mac address, directly set to firmware with no change. Signed-off-by:
-
Luc Van Oostenryck authored
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by:
-
Felix Fietkau authored
The check within mt76_txq_send_burst is not enough, as it happens after a first frame has already been queued up Signed-off-by:
-
Felix Fietkau authored
Fixes a reported lockdep error in mac80211: [ 179.867321] ============================= [ 179.871510] WARNING: suspicious RCU usage [ 179.875528] 4.14.32 #0 Not tainted [ 179.878924] ----------------------------- [ 179.882981] backports-2017-11-01/net/mac80211/tx.c:594 suspicious rcu_dereference_check() usage! [ 179.891785] [ 179.891785] other info that might help us debug this: [ 179.891785] [ 179.899824] [ 179.899824] rcu_scheduler_active = 2, debug_locks = 1 [ 179.906343] 2 locks held by ksoftirqd/0/7: [ 179.910479] #0: (&(&q->lock)->rlock){+.-.}, at: [<86b207a4>] mt76_dma_tx_cleanup+0x64/0x354 [mt76] [ 179.919734] #1: (&(&fq->lock)->rlock){+.-.}, at: [<87238410>] ieee80211_tx_dequeue+0x54/0xc3c [mac80211] [ 179.929890] [ 179.929890] stack backtrace: [ 179.934257] CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.14.32 #0 [ 179.940421] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000036 00000000 00000000 [ 179.948864] 87c3d24c 80696377 8061039c 00000000 00000007 00000001 87c5db78 6534689d [ 179.957306] 00000000 00000000 80e10000 87c5da74 00000001 0000015a 00000007 00000000 [ 179.965748] 00000000 806a0000 000e4171 00000000 00000000 00000000 ffffffff 00000001 [ 179.974189] 806c0000 8692b240 86b000d0 87316fe4 00000001 802c9a68 00000000 80700000 [ 179.982632] ... [ 179.985104] Call Trace: [ 179.987582] [<80010a48>] show_stack+0x58/0x100 [ 179.992040] [<804c2c58>] dump_stack+0xe8/0x170 [ 179.996868] [<87234a04>] ieee80211_tx_h_select_key+0xa8/0x5b8 [mac80211] [ 180.004299] [<87238d44>] ieee80211_tx_dequeue+0x988/0xc3c [mac80211] [ 180.011048] [<86b230dc>] mt76_txq_schedule+0x110/0x3a4 [mt76] [ 180.016821] [<86b209d0>] mt76_dma_tx_cleanup+0x290/0x354 [mt76] [ 180.022777] [<86be2e60>] mt7603_tx_tasklet+0x40/0x6c [mt7603e] [ 180.028637] [<80037058>] tasklet_action+0x110/0x1ec [ 180.033532] [<804e1dac>] __do_softirq+0x164/0x35c [ 180.038235] [<80037174>] run_ksoftirqd+0x40/0x84 [ 180.042870] [<800580c8>] smpboot_thread_fn+0x1a8/0x1d8 [ 180.048023] [<800542e8>] kthread+0x130/0x144 [ 180.052297] [<8000b1f8>] ret_from_kernel_thread+0x14/0x1c Signed-off-by: -
Felix Fietkau authored
Avoids having the tid or station entry disappear prematurely. Also cancel the reorder work earlier to avoid further processing delayed by waiting for the lock to be released Signed-off-by:
-
Felix Fietkau authored
Add a spinlock in mt76_rx_complete. Without this, multiple stats updates could happen in parallel, which can lead to deadlocks. There are probably more corner cases fixed by this change. Signed-off-by:
-
Lorenzo Bianconi authored
Fix is_mt7612 routine since asic version is set in mt76_dev revision field and not in mt76x2_dev one. Moreover remove mt76x2_dev rev field since it is never used in the driver Fixes: 7bc04215 ('mt76: add driver code for MT76x2e') Signed-off-by:
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2018-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second batch of iwlwifi patches for 4.18 * Some preparations for new hardware; * A workaround to rescan the bus for the rare situation when older devices become irresponsive, * Hardening of the firmware loading code to avoid issues with corrupted files; * A few clean-ups and bugfixes.
-
- 26 Apr, 2018 11 commits
-
-
Eliad Peller authored
In case of "any" wowlan trigger is configured, no valid wakeup filter was configured. Moreover, the fw assumes there's no connection when there are no configured wakeup filters. This leads to the station info not being updated on D3 command, causing rate_n_flags to be 0 when the offloading code sends tx frame (triggering SYSASSERT_102C due to invalid antenna param) Note: "any" trigger is currently assumed to only be used when entering d0i3 (which has a different flow). However, we still reach this code when using d3_test. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Sara Sharon authored
Firmware will only send non low-latency TIDs in the bitmap, so the check is now redundant. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Luca Coelho authored
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare it as u16. The compiler doesn't seem to have any problems with that (it probably automatically makes it u32), but it's cleaner to use a type that is long enough for all the flags. Signed-off-by: -
Luca Coelho authored
If we fail to to grab NIC access because the device is not responding (i.e. CSR_GP_CNTRL returns 0xFFFFFFFF), remove the device from the PCI bus, to avoid any further damage, and to let the user space rescan. In order to inform the userspace that a rescan is needed, we send a kobject uevent with "INACCESSIBLE". This functionality is disabled by default, but can be enabled via a new module parameter called "remove_when_gone". In the future we may change this module parameter to include 3 modes instead: do nothing; auto-rescan or; send uevent. Signed-off-by:
Rajat Jain <rajatja@google.com>
-
Luca Coelho authored
Now that we check and copy only the actual size of the page block, there is no need to treat the last block separately. Remove the mostly duplicate code and make the main copy loop handle also the last block. Signed-off-by: -
Luca Coelho authored
The page loading code trusts the data provided in the firmware images a bit too much and may cause a buffer overflow or copy unknown data if the block sizes don't match what we expect. To prevent potential problems, harden the code by checking if the sizes we are copying are what we expect. Cc: stable@vger.kernel.org Signed-off-by: -
Johannes Berg authored
Future changes will require moving the HE radiotap data into the SKB head, but this means we need to have the alignment reservation done before that. To prepare, move the alignment reservation earlier here. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Golan Ben Ami authored
In future devices we use different csr addresses for hw addresses. Update csr addresses to support new and legacy devices. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
-
Eliad Peller authored
In case of A-MSDUs, the trans layer is taking care of building the subframes (out of the given skb), according to the given gso_size. However, in some testing flows, we want to build the whole A-MSDU frame in a different place (e.g. userspace), and ask the driver to send it as-is. In case of gso_size==0, simply treat the frame as normal-frame, although the A-MSDU flag is set. Signed-off-by:
-
Luca Coelho authored
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: -
Golan Ben-Ami authored
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by:
-
