- 11 May, 2018 7 commits
-
-
Russell King authored
Add rudimentary phylink support to mv88e6xxx. This allows the driver using user ports with fixed links to keep operating normally. User ports with normal PHYs are not affected since the switch automatically manages their link parameters. User facing ports which use a SFP/SFF with a non-fixed link mode might require a call to phylink_mac_change() to operate properly. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> [Andrew: fixed link setting after adding link polling] Signed-off-by:
Andrew Lunn <andrew@lunn.ch> [florian: expand commit message] Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Since we use PHYLIB to manage the per-port link indication, this will also be reflected correctly in the network device's carrier state, so we can use ethtool_op_get_link() instead. Signed-off-by:
-
Florian Fainelli authored
Make the bcm_sf2 driver implement phylink_mac_ops since it needs to support a wide variety of network interfaces: internal & external MDIO PHYs, fixed PHYs, MoCA with MMIO link status. A large amount of what needs to be done already exists under bcm_sf2_sw_adjust_link() so we are essentially breaking this down into the necessary operation for PHYLINK to work: mac_config, mac_link_up, mac_link_down and validate. We can now entirely get rid of most of what fixed_link_update() provided because only the link information is actually necessary. We still have to force DUPLEX_FULL for legacy Device Tree bindings that did not specify that before. Signed-off-by:
-
Florian Fainelli authored
In preparation for adding support for PHYLINK within DSA, define a number of operations that we will need and that switch drivers can start implementing. Proper integration with PHYLINK will follow in subsequent patches. We start selecting PHYLINK (which implies PHYLIB) in net/dsa/Kconfig such that drivers can be guaranteed that this dependency is properly taken care of and can start referencing PHYLINK helper functions without requiring stubs or anything. Signed-off-by:
-
Russell King authored
When using a fixed link with a link GPIO, we need to poll that GPIO to determine link state changes. This is consistent with what fixed_phy.c does. Signed-off-by:
-
Florian Fainelli authored
We are not releasing the link GPIO descriptor with gpiod_put() which results in subsequent probing to get -EBUSY when calling fwnode_get_named_gpiod(). Fix this by doing the release in phylink_destroy(). Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
-
Florian Fainelli authored
The GPIO provider for the link GPIO line might require the use of the _cansleep() API, utilize that. This is safe to do since we run in workqueue context. Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
-
- 10 May, 2018 33 commits
-
-
Petr Machata authored
Breaking out of the switch in rocker_switchdev_event() still ends up scheduling work, except an ill-defined one. This leads to an OOPS cited below. Fix by postponing the check until rocker_switchdev_event_work(). [ 23.148476] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 23.148810] PGD 0 P4D 0 [ 23.148982] Oops: 0000 [#1] PREEMPT SMP PTI [ 23.149190] Modules linked in: bridge stp llc iptable_nat nf_nat_ipv4 nf_nat e1000 rocker [ 23.149768] CPU: 0 PID: 239 Comm: kworker/u2:4 Not tainted 4.17.0-rc3-net_next_queue-custom #6 [ 23.150298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 23.150868] Workqueue: rocker rocker_switchdev_event_work [rocker] [ 23.151258] RIP: 0010:ofdpa_port_fdb+0x7b/0x230 [rocker] [ 23.151597] RSP: 0018:ffffc900004b3e18 EFLAGS: 00010246 [ 23.151952] RAX: 00000000fffbc68c RBX: 0000000000000000 RCX: 0000000000000000 [ 23.152363] RDX: 0000000000000010 RSI: ffff88003b4471e0 RDI: 00000000ffffffff [ 23.152768] RBP: ffff88003b4471c0 R08: ffff88003b4471e0 R09: ffff88003b4471c0 [ 23.153141] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880036caf000 [ 23.153515] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88003bc00000 [ 23.153919] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 23.154444] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.154806] CR2: 0000000000000000 CR3: 0000000036eb6000 CR4: 00000000000006f0 [ 23.155194] Call Trace: [ 23.155472] rocker_switchdev_event_work+0x9b/0xd0 [rocker] [ 23.155850] ? __schedule+0x231/0x700 [ 23.156175] process_one_work+0x1cf/0x3e0 [ 23.156490] worker_thread+0x26/0x3d0 [ 23.156795] ? trace_event_raw_event_workqueue_execute_start+0x80/0x80 [ 23.157181] kthread+0x10e/0x130 [ 23.157485] ? kthread_create_worker_on_cpu+0x40/0x40 [ 23.157824] ret_from_fork+0x35/0x40 [ 23.158174] Code: 00 00 c1 e8 02 4c 8d 45 20 bf ff ff ff ff 83 e0 01 4c 89 65 20 88 45 14 48 8b 05 21 da 1f e2 4c 89 c6 4c 89 44 24 10 48 89 45 18 <41> 8b 45 00 89 45 28 41 0f b7 45 04 66 89 45 2c 0f b7 44 24 04 [ 23.159346] RIP: ofdpa_port_fdb+0x7b/0x230 [rocker] RSP: ffffc900004b3e18 [ 23.159742] CR2: 0000000000000000 [ 23.160088] ---[ end trace f9b16d4cb6df0629 ]--- Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications") Suggested-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
-
Boris Pismenny authored
Add sg table initialization to fix a BUG_ON encountered when enabling CONFIG_DEBUG_SG. Signed-off-by:
Boris Pismenny <borisp@mellanox.com> Signed-off-by:
-
Ganesh Goudar authored
fix the wrong conversion where 1 Mbps was converted to 1024 Kbps. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Support VLAN devices in mirroring offloads Petr says: When offloading "tc action mirred mirror", there are several scenarios where VLAN devices can show up, that mlxsw can offload on Spectrum machines. I) A direct mirror to a VLAN device on top of a front-panel port device (commonly referred to as "RSPAN") II) VLAN device in egress path of a packet when resolving a mirror to gretap or ip6gretap netdevice. Specifically in the latter case, the following are the cases that can be offloaded: IIa) VLAN device directly above a physical device. IIb) A VLAN-unaware bridge where the egress device is as in IIa. IIc) VLAN device on top of a VLAN-aware bridge where the egress device is a physical device. This patch set implements all the above cases. First, in patch #1, br_vlan_get_info() is extended to allow bridge master argument. Case I is then implemented in patches #2 and #3, case II in patch #4. Note that handling of VLAN protocol is not included. In case I, mirrored packets may end up being double-tagged, and it might be reasonable for the outer tag to be an 802.1ad. However, the protocol type configuration would have to be put on the same VLAN netdevice that represents normal VLAN traffic, and mlxsw currently ignores this setting in that case. Thus this support was left out and the encapsulation always uses 802.1q protocol. ==================== Signed-off-by: -
Petr Machata authored
When mirroring to a gretap or ip6gretap device, allow the underlay packet path to include VLAN devices. The following configurations are supported in underlay: - vlan over phys - vlan-unaware bridge where the egress device is vlan over phys - vlan over vlan-aware bridge where the egress device is phys Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Petr Machata authored
Offload "tc action mirred mirror" to a device that is a vlan device on top of a front-panel port device. The hardware encapsulates the mirrored packets in a VLAN tag. That includes the case that the mirrored traffic is already VLAN-tagged--in that case the monitor traffic will be double-tagged, just like in the software path. Signed-off-by:
-
Petr Machata authored
Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETH to support VLAN-encapsulated port mirroring. Signed-off-by:
-
Petr Machata authored
Mirroring offload in mlxsw needs to check that a given VLAN is allowed to ingress the bridge device. br_vlan_get_info() is the function that is used for this, however currently it only supports bridge port devices. Extend it to support bridge masters as well. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Jon Maxwell authored
This version has some suggestions by Eric Dumazet: - Use a local variable for the mark in IPv6 instead of ctl_sk to avoid SMP races. - Use the more elegant "IP4_REPLY_MARK(net, skb->mark) ?: sk->sk_mark" statement. - Factorize code as sk_fullsock() check is not necessary. Aidan McGurn from Openwave Mobility systems reported the following bug: "Marked routing is broken on customer deployment. Its effects are large increase in Uplink retransmissions caused by the client never receiving the final ACK to their FINACK - this ACK misses the mark and routes out of the incorrect route." Currently marks are added to sk_buffs for replies when the "fwmark_reflect" sysctl is enabled. But not for TW sockets that had sk->sk_mark set via setsockopt(SO_MARK..). Fix this in IPv4/v6 by adding tw->tw_mark for TIME_WAIT sockets. Copy the the original sk->sk_mark in __inet_twsk_hashdance() to the new tw->tw_mark location. Then progate this so that the skb gets sent with the correct mark. Do the same for resets. Give the "fwmark_reflect" sysctl precedence over sk->sk_mark so that netfilter rules are still honored. Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Joe Perches authored
INET_CSK_DEBUG is always set and only is used for 2 pr_debug calls. EXPORT_SYMBOL(inet_csk_timer_bug_msg) is only used by these 2 pr_debug calls and is also unnecessary as the exported string can be used directly by these calls. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Felix Manlunas authored
Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
-
Felix Manlunas authored
The liquidio_watchdog kernel thread is watching over only 12 cores of the Octeon CN23XX; it's neglecting the other 4 cores that are present in the CN2360. Fix it by defining LIO_MAX_CORES as 16. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-05-09 This series contains updates to fm10k only. Jake provides all the changes in the series, starting with adding support for accelerated MACVLAN devices. Reduced code duplication by implementing a macro to be used when setting up the type specific macros. Avoided potential bugs with stats by using a macro to calculate the array size when passing to ensure that the size is correct. v2: changed macro reference '#' with __stringify() as suggested by Joe Perches to patch 2 of the series. Also made sure the updated series of patches is actually pushed to my kernel.org tree ==================== Signed-off-by: -
Eric Dumazet authored
WARNING: lock held when returning to user space! 4.17.0-rc3+ #37 Not tainted syz-executor1/27662 is leaving the kernel with locks still held! 1 lock held by syz-executor1/27662: #0: 00000000f661aee7 (rcu_read_lock){....}, at: ip6_route_del+0xea/0x13f0 net/ipv6/route.c:3206 BUG: scheduling while atomic: syz-executor1/27662/0x00000002 INFO: lockdep is turned off. Modules linked in: Kernel panic - not syncing: scheduling while atomic CPU: 1 PID: 27662 Comm: syz-executor1 Not tainted 4.17.0-rc3+ #37 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 panic+0x22f/0x4de kernel/panic.c:184 __schedule_bug.cold.85+0xdf/0xdf kernel/sched/core.c:3290 schedule_debug kernel/sched/core.c:3307 [inline] __schedule+0x139e/0x1e30 kernel/sched/core.c:3412 schedule+0xef/0x430 kernel/sched/core.c:3549 exit_to_usermode_loop+0x220/0x310 arch/x86/entry/common.c:152 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline] syscall_return_slowpath arch/x86/entry/common.c:265 [inline] do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x455979 RSP: 002b:00007fbf4051dc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: 0000000000000000 RBX: 00007fbf4051e6d4 RCX: 0000000000455979 RDX: 00000000200001c0 RSI: 000000000000890c RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000003c8 R14: 00000000006f9b60 R15: 0000000000000000 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 23fb93a4 ("net/ipv6: Cleanup exception and cache route handling") Signed-off-by:syzbot <syzkaller@googlegroups.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Misc bug fixes for HNS3 Ethernet Driver Fixes to some of the bugs found during system test, internal review and clean-up ==================== Signed-off-by: -
Yunsheng Lin authored
This patch refactors the loopback related function in order to support the serdes loopback. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
The head or tail in hardware is not longer valid when resetting, current hns3_clear_all_ring use them to clean the ring, which will cause problem during resetting. This patch fixes it by using next_to_use and next_to_clean in the ring struct. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
-
Yunsheng Lin authored
The add/del_tunnel_udp is not implemented in hclge_main moulde, the NETIF_F_RX_UDP_TUNNEL_PORT feature bit is added automatically by stack when ndo_udp_tunnel_add is not null in dev->netdev_ops. This patch removes the add/del_tunnel_udp related function, for we do not support this feature now. Signed-off-by:
-
Yunsheng Lin authored
When hns3_init_mac_addr is called during reset process, it will get the mac address from NCL_CONFIG and set it to hardware. If user has changed the mac address, then the mac address set by user is lost during resetting. This patch fixes it by not getting the mac address from NCL_CONFIG when resetting. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by:
-
Stephen Hemminger authored
Fix simple misspelling kashkey_offset should be hashkey_offset. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Sekhar Nori authored
A well timed kernel preemption in the time_after() loop in wait_for_idle() can result in a spurious timeout error to be returned. Fix it by using readl_poll_timeout() which takes care of this issue. Reviewed-by:
Sekhar Nori <nsekhar@ti.com> Reviewed-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: cleanup Global Control 2 register The mv88e6xxx driver still writes arbitrary values in the Global 1 Control 2 register at setup, which layout differs a lot between chips. This results in an inconsistent configuration, for example with the Remote Management Unit (RMU). The first patch adds an operation for the Cascade Port bits, the second patch sets the device number in the device mapping function and the third patch adds an operation to correctly disable the RMU. ==================== Signed-off-by: -
Vivien Didelot authored
The RMU mode bits moved a lot within the Global Control 2 register of the Marvell switch families. Add an .rmu_disable op to support at least 3 known alternatives. Signed-off-by:
-
Vivien Didelot authored
All Marvell switches supported by mv88e6xxx have to set their device number in the Global Control 2 register. Extract this in a read then write function, called from the device mapping setup code. Signed-off-by:
-
Vivien Didelot authored
Only the 88E6185 family has bits 15:12 Cascade Port bits in the Global Control 2 register. Hence inconsistent values are actually written in this register for other families. Add a .set_cascade_port operation to isolate the 88E6185 case, and call it from the device mapping setup function. Signed-off-by:
-
David S. Miller authored
Tariq Toukan says: ==================== mlx4_core misc for 4.18 This patchset contains misc enhancements from the team to the mlx4 Core driver. Patch 1 by Eran adds driver version report in FW. Patch 2 by Yishai implements suspend/resume PCI callbacks. Patch 3 extends the range of an existing module param from boolean to numerical. Series generated against net-next commit: 53a7bdfb dt-bindings: dsa: Remove unnecessary #address/#size-cells ==================== Signed-off-by:
-
Tariq Toukan authored
Extend the boolean interpretation of msi_x module parameter to numerical, as follows: 0 - Don't use MSI-X. 1 - Use MSI-X, driver decides the num of MSI-X irqs. >=2 - Use MSI-X, limit number of MSI-X irqs to msi_x. In SRIOV, this limits the number of MSI-X irqs per VF. Signed-off-by:Tariq Toukan <tariqt@mellanox.com> Cc: Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Reviewed-by:
Ajaykumar Hotchandani <ajaykumar.hotchandani@oracle.com> Signed-off-by:
-
Yishai Hadas authored
Implement suspend/resume callbacks in struct pci_driver. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Eran Ben Elisha authored
If supported, write a driver version string to FW as part of the INIT_HCA command. Example of driver version: "Linux,mlx4_core,4.0-0" Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Vivien Didelot authored
Commit 161d82de ("net: bridge: Notify about !added_by_user FDB entries") causes the below oops when bringing up a slave interface, because dsa_port_fdb_add is still scheduled, but with a NULL address. To fix this, keep the dsa_slave_switchdev_event function agnostic of the notified info structure and handle the added_by_user flag in the specific dsa_slave_switchdev_event_work function. [ 75.512263] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 75.519063] pgd = (ptrval) [ 75.520545] [00000000] *pgd=00000000 [ 75.522839] Internal error: Oops: 17 [#1] ARM [ 75.525898] Modules linked in: [ 75.527673] CPU: 0 PID: 9 Comm: kworker/u2:1 Not tainted 4.17.0-rc2 #78 [ 75.532988] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 75.538153] Workqueue: dsa_ordered dsa_slave_switchdev_event_work [ 75.542970] PC is at mv88e6xxx_port_db_load_purge+0x60/0x1b0 [ 75.547341] LR is at mdiobus_read_nested+0x6c/0x78 [ 75.550833] pc : [<804cd5c0>] lr : [<804bba84>] psr: 60070013 [ 75.555796] sp : 9f54bd78 ip : 9f54bd87 fp : 9f54bddc [ 75.559719] r10: 00000000 r9 : 0000000e r8 : 9f6a6010 [ 75.563643] r7 : 00000000 r6 : 81203048 r5 : 9f6a6010 r4 : 9f6a601c [ 75.568867] r3 : 00000000 r2 : 00000000 r1 : 0000000d r0 : 00000000 [ 75.574094] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 75.579933] Control: 10c53c7d Table: 9de20059 DAC: 00000051 [ 75.584384] Process kworker/u2:1 (pid: 9, stack limit = 0x(ptrval)) [ 75.589349] Stack: (0x9f54bd78 to 0x9f54c000) [ 75.592406] bd60: 00000000 00000000 [ 75.599295] bd80: 00000391 9f299d10 9f299d68 8014317c 9f7f0000 8120af00 00006dc2 00000000 [ 75.606186] bda0: 8120af00 00000000 9f54bdec 1c9f5d92 8014317c 9f6a601c 9f6a6010 00000000 [ 75.613076] bdc0: 00000000 00000000 9dd1141c 8125a0b4 9f54be0c 9f54bde0 804cd8a8 804cd56c [ 75.619966] bde0: 0000000e 80143680 00000001 9dce9c1c 81203048 9dce9c10 00000003 00000000 [ 75.626858] be00: 9f54be5c 9f54be10 806abcac 804cd864 9f54be54 80143664 8014317c 80143054 [ 75.633748] be20: ffcaa81d 00000000 812030b0 1c9f5d92 00000000 81203048 9f54beb4 00000003 [ 75.640639] be40: ffffffff 00000000 9dd1141c 8125a0b4 9f54be84 9f54be60 80138e98 806abb18 [ 75.647529] be60: 81203048 9ddc4000 9dce9c54 9f72a300 00000000 00000000 9f54be9c 9f54be88 [ 75.654420] be80: 801390bc 80138e50 00000000 9dce9c54 9f54beac 9f54bea0 806a9524 801390a0 [ 75.661310] bea0: 9f54bedc 9f54beb0 806a9c7c 806a950c 9f54becc 00000000 00000000 00000000 [ 75.668201] bec0: 9f540000 1c9f5d92 805fe604 9ddffc00 9f54befc 9f54bee0 806ab228 806a9c38 [ 75.675092] bee0: 806ab178 9ddffc00 9f4c1900 9f40d200 9f54bf34 9f54bf00 80131e30 806ab184 [ 75.681983] bf00: 9f40d214 9f54a038 9f40d200 9f40d200 9f4c1918 812119a0 9f40d214 9f54a038 [ 75.688873] bf20: 9f40d200 9f4c1900 9f54bf7c 9f54bf38 80132124 80131d1c 9f5f2dd8 00000000 [ 75.695764] bf40: 812119a0 9f54a038 812119a0 81259c5b 9f5f2dd8 9f5f2dc0 9f53dbc0 00000000 [ 75.702655] bf60: 9f4c1900 801320b4 9f5f2dd8 9f4f7e88 9f54bfac 9f54bf80 80137ad0 801320c0 [ 75.709544] bf80: 9f54a000 9f53dbc0 801379a0 00000000 00000000 00000000 00000000 00000000 [ 75.716434] bfa0: 00000000 9f54bfb0 801010e8 801379ac 00000000 00000000 00000000 00000000 [ 75.723324] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 75.730206] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 75.737083] Backtrace: [ 75.738252] [<804cd560>] (mv88e6xxx_port_db_load_purge) from [<804cd8a8>] (mv88e6xxx_port_fdb_add+0x50/0x68) [ 75.746795] r10:8125a0b4 r9:9dd1141c r8:00000000 r7:00000000 r6:00000000 r5:9f6a6010 [ 75.753323] r4:9f6a601c [ 75.754570] [<804cd858>] (mv88e6xxx_port_fdb_add) from [<806abcac>] (dsa_switch_event+0x1a0/0x660) [ 75.762238] r8:00000000 r7:00000003 r6:9dce9c10 r5:81203048 r4:9dce9c1c [ 75.767655] [<806abb0c>] (dsa_switch_event) from [<80138e98>] (notifier_call_chain+0x54/0x94) [ 75.774893] r10:8125a0b4 r9:9dd1141c r8:00000000 r7:ffffffff r6:00000003 r5:9f54beb4 [ 75.781423] r4:81203048 [ 75.782672] [<80138e44>] (notifier_call_chain) from [<801390bc>] (raw_notifier_call_chain+0x28/0x30) [ 75.790514] r9:00000000 r8:00000000 r7:9f72a300 r6:9dce9c54 r5:9ddc4000 r4:81203048 [ 75.796982] [<80139094>] (raw_notifier_call_chain) from [<806a9524>] (dsa_port_notify+0x24/0x38) [ 75.804483] [<806a9500>] (dsa_port_notify) from [<806a9c7c>] (dsa_port_fdb_add+0x50/0x6c) [ 75.811371] [<806a9c2c>] (dsa_port_fdb_add) from [<806ab228>] (dsa_slave_switchdev_event_work+0xb0/0x10c) [ 75.819635] r4:9ddffc00 [ 75.820885] [<806ab178>] (dsa_slave_switchdev_event_work) from [<80131e30>] (process_one_work+0x120/0x3a4) [ 75.829241] r6:9f40d200 r5:9f4c1900 r4:9ddffc00 r3:806ab178 [ 75.833612] [<80131d10>] (process_one_work) from [<80132124>] (worker_thread+0x70/0x574) [ 75.840415] r10:9f4c1900 r9:9f40d200 r8:9f54a038 r7:9f40d214 r6:812119a0 r5:9f4c1918 [ 75.846945] r4:9f40d200 [ 75.848191] [<801320b4>] (worker_thread) from [<80137ad0>] (kthread+0x130/0x160) [ 75.854300] r10:9f4f7e88 r9:9f5f2dd8 r8:801320b4 r7:9f4c1900 r6:00000000 r5:9f53dbc0 [ 75.860830] r4:9f5f2dc0 [ 75.862076] [<801379a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) [ 75.867999] Exception stack(0x9f54bfb0 to 0x9f54bff8) [ 75.871753] bfa0: 00000000 00000000 00000000 00000000 [ 75.878640] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 75.885519] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 75.890844] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801379a0 [ 75.897377] r4:9f53dbc0 r3:9f54a000 [ 75.899663] Code: e3a02000 e3a03000 e14b26f4 e24bc055 (e5973000) [ 75.904575] ---[ end trace fbca818a124dbf0d ]--- Fixes: 816a3bed ("switchdev: Add fdb.added_by_user to switchdev notifications") Signed-off-by:
-
Jon Maloy authored
In commit be47e41d ("tipc: fix use-after-free in tipc_nametbl_stop") we fixed a problem caused by premature release of service range items. That fix is correct, and solved the problem. However, it doesn't address the root of the problem, which is that we don't lookup the tipc_service -> service_range -> publication items in the correct hierarchical order. In this commit we try to make this right, and as a side effect obtain some code simplification. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Kirill Tkhai authored
Since net ns of tun device is assigned on the device creation, and it never changes, we do not need to use any lock to get it from alive tun. Signed-off-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by:
-
David S. Miller authored
Davidlohr Bueso says: ==================== net: Update static keys to modern api The following patches update pretty much all core net static key users to the modern api. Changes are mostly trivial conversion without affecting any semantics. The motivation is a resend of patches 1 and 2 from a while[1] back, and the rest are added patches, specific for -net. Applies against today's linux-next. Compile tested only. [1] lkml.kernel.org/r/20180326210929.5244-1-dave@stgolabs.net ==================== Signed-off-by:
-
