- 08 Dec, 2006 40 commits
-
-
James Simmons authored
Automatically set VIDEO_SELECT when you select VESA FB. Currently if you select VESA FB with fbcon but don't select VGA console the box will not have its video mode set. Thus you get a blank screen. Signed-off-by:
James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jordan Crouse authored
For Geode devices without a flatpanel aware BIOS, this enables the flatpanel power and data. Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
-
Jordan Crouse authored
Use the right MSR and bits to detect if the GX is strapped for TFT or CRT Signed-off-by:
-
Jordan Crouse authored
Add support for command line options for setting the mode and various settings. [akpm@osdl.org: cleanups] Signed-off-by:
-
Jordan Crouse authored
Support TFT panels by correctly setting up the flat panel registers [akpm@osdl.org: cleanups] Signed-off-by:
-
Jordan Crouse authored
We cannot assume that the BIOS will be correctly setting up the hardware, so set some bits in various display registers to enable video output. Allow an advanced user to specify a frambuffer size, rather then probing the BIOS. All of these fixes were prompted by the OLPC effort. [akpm@osdl.org: cleanups] Signed-off-by:
-
Jordan Crouse authored
Use the Geode GX BIOS virtual registers to get the actual size of the framebuffer. Signed-off-by:
-
Henrique de Moraes Holschuh authored
ACPI drivers like ibm-acpi are moving to the backlight sysfs infrastructure. During ibm-acpi testing, I have noticed that backlight_device_unregister() sets the display brightness and power to zero. This causes the display to be dimmed on ibm-acpi module removal. It will affect all other ACPI drivers that are being converted to use the backlight class, as well. It also affects a number of framebuffer devices that are used on desktops and laptops which might also not want such behaviour. Since working around this behaviour requires undesireable hacks, Richard Purdie decided that we would be better off reverting the changes in the sysfs class, and adding the code to dim and power off the backlight device to the drivers that want it. This patch is my attempt to do so. Patch against latest linux-2.6.git. Changes untested, as I lack the required hardware. Still, they are trivial enough that, apart from typos, there is little chance of getting them wrong. Signed-off-by:
Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by:
Richard Purdie <rpurdie@rpsys.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
-
Franck Bui-Huu authored
Fix some possible unaligned accesses when accessing fields of 'image' pointer. Indeed this pointer was obtained by allocating a block of memory that embeds a temporary array plus an image structure. The temporary buffer was located at the start of the allocated block and depending on its size, the image structure which comes right after can be unaligned. For example when using mini fonts (4x6) (cursor's width is 4 and its height is 6) the temporary buf size is 6 bytes. Therefore this patch moves the image structure to the start of the block and moves the temporary buffer right after. It makes 'image' pointer always aligned and since the tempo buf is a buffer of char, it's always correctly aligned as well. It also fixes the file header alignement. Signed-off-by:
Franck Bui-Huu <fbuihuu@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
James Simmons authored
The backlight layer should be independent from the framebuffer layer. It can use the services offered by the framebuffer, but its absence should not prevent the backlight/lcd layer from functioning. [akpm@osdl.org: cleanups] Signed-off-by:
-
Randy Dunlap authored
With CONFIG_FB_SGIVW=m: WARNING: "sgivwfb_mem_size" [drivers/video/sgivwfb.ko] undefined! WARNING: "sgivwfb_mem_phys" [drivers/video/sgivwfb.ko] undefined! (or don't allow FB_SGIVW=m in Kconfig) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
-
Alexey Dobriyan authored
From: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Ville Syrjala authored
Some register were only set in aty_init() which is not called on resume. I added the aty_resume_chip() function to reset those registers on resume. Susped-to-ram now works on a HP Omnibook 6000 with acpi_sleep=s3_bios. Signed-off-by:
Ville Syrjala <syrjala@sci.fi> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Ville Syrjala authored
Improve atyfb_atari_probe(): * Call correct_chipset() so that more par members, par->features in particular, get initialized. * If probe fails iounmap() the mapped regions and continue probing for more adapters. Only verified to cross-compile due to lack of hardware. Signed-off-by:
-
Ville Syrjala authored
Remove aty_cmap_regs. Access the LUT in the same way as other registers. Signed-off-by:
-
Ville Syrjala authored
Fix some __init and __devinit annotations. Signed-off-by:
-
Ville Syrjala authored
The 'name' argument of aty_init() is pointless because the bus type can be queried from the hardware. Signed-off-by:
-
Ville Syrjala authored
Fix a minor problem in blanking level transitions. Reducing the blanking level gradually was impossible. Signed-off-by:
-
Ville Syrjala authored
Silence some sparse warnings: * Remove casts from atari out_le32() and friends. * Move accel functions' declarations to atyfb.h. Signed-off-by:
-
Ville Syrjala authored
Fix some compiler warnings and remove an #ifdef. Signed-off-by:
-
Ville Syrjala authored
atyfb has used the auxiliary register aperture for a long time. Remove a related FIXME which was accidentally left in. Signed-off-by:
-
Raphael Assenat authored
This patch adds a new ioctl range for the mbxfb driver. Signed-off-by:
Raphael Assenat <raph@8d.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
-
Raphael Assenat authored
This patch adds a way to create and use the video plane (YUV overlay) and scaling video scaling features of the chip. The overlay is configured, resized and modified using a device specific ioctl. Also included in this patch: - If no platform data was passed, print an error and exit instead of crashing. - Added a write_reg(_dly) macro. This improves readability when manipulating chip registers. (no more udelay() after each write). - Comments about some issues. Signed-off-by: -
Raphael Assenat authored
This patch fixes debugfs for mbxfb and adds some missing registers. The way registers were read was out of sync with the rest of the driver (direct access instead of using readl()) sdram controller registers are now accessible in the sdram/ subdirectory and some other registers are grouped in the misc/ subdirectory. Signed-off-by:
-
Raphael Assenat authored
This patch adds register bits access macros for chip's Video Plane, Scaling and interrupt registers. Signed-off-by:
-
Raphael Assenat authored
This patch corrects the address for register HSCOEFF3. Signed-off-by:
-
Freddy Spierenburg authored
Currently a lot of flickering is seen on the VGA and LCD port when one starts a DBAu1100 board, with 'CONFIG_PRINTK=3Dy'. This patch removes the flickering and as a result all kernel messages come by in a nice steady fashion. Signed-off-by:
Freddy Spierenburg <freddy@dusktilldawn.nl> Cc: "Antonino A. Daplas" <adaplas@pol.net> Acked-by:
-
Helge Deller authored
- move some static data into the .rodata section - simplify source code for transl_l[] and transl_h[] which makes it more readable Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Helge Deller authored
- annotate some variables in vesafb driver as __read_mostly Signed-off-by:
-
Helge Deller authored
- annotate some variables from vgacon.c and fbmem.c as __read_mostly - move the mask[] array in fb_set_logo_truepalette() into the .rodata section Signed-off-by:
-
Helge Deller authored
- move some structs and arrays to the read-only (.rodata) section [akpm@osdl.org: build fix] Signed-off-by:
-
Helge Deller authored
- Mark the default colormaps read-only, as nobody should be allowed to modify them - Additionally mark color values as __read_mostly since they will only be modified (very seldom) by fb_invert_cmaps() - Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE() macro Signed-off-by:
-
Arnaud Patard (Rtp authored
This patch adds support for stn displays on the s3c2410 arm SoC. The LCD type is choosen by a new field in the s3c2410fb_mach_info structure and its value is the value of the PNRMODE bits. This worth to be noted as a value of 0 means that you configure a 4 bit dual scan stn display. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben-linux@fluff.org> Acked-by:
-
Jordan Crouse authored
If no default mode is specified, it should be grabbed from the supplied database, not the default one. [teanropo@jyu.fi: fix it] [akpm@osdl.org: simplify it] [akpm@osdl.org: remove pointless DEFAULT_MODEDB_INDEX] Signed-off-by:
Tero Roponen <teanropo@jyu.fi> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by:
-
Maciej W. Rozycki authored
Inspection of real hardware has revealed one of the clock frequencies known to be supported by PMAGB-B hardware is off by 3kHz. Following is a fix. Please apply. Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Acked-by:
-
David Rientjes authored
Remove unnecesary iteration and accumulator variables from SiS_DDC2Delay. Originally spotted by Jesper Juhl <jesper.juhl@gmail.com>. Cc: Jesper Juhl <jesper.juhl@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by:
David Rientjes <rientjes@cs.washington.edu> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jeff Garzik authored
aty128fb: return an error in the unlikely event that we cannot calculate some key PLL info rivafb: * call CalcStateExt() directly, rather than via function pointers, since CalcStateExt() is the only value ever assigned to ->CalcStateExt(). * propagate error return back from CalcVClock() through callers Signed-off-by:
Jeff Garzik <jeff@garzik.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
Amol Lad <amol@verismonetworks.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Amol Lad authored
ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. Signed-off-by:
-
