- 01 Sep, 2010 3 commits
-
-
Cyrill Gorcunov authored
Implements verification of - Bits of ESCR EventMask field (meaningful bits in field are hardware predefined and others bits should be set to zero) - INSTR_COMPLETED event (it is available on predefined cpu model only) - Thread shared events (they should be guarded by "perf_event_paranoid" sysctl due to security reason). The side effect of this action is that PERF_COUNT_HW_BUS_CYCLES become a "paranoid" general event. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Tested-by: Lin Ming <ming.m.lin@intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100825182334.GB14874@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Akinobu Mita authored
The panic notifer in lockup_detector just set did_panic to 1. But did_panic is not used anywhere so we can just remove it. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com LKML-Reference: <1283310009-22168-4-git-send-email-dzickus@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Akinobu Mita authored
By the commit e6bde73b ("cpu-hotplug: return better errno on cpu hotplug failure"), the cpu notifier can return encapsulate errno value, resulting in more meaningful error codes for CPU hotplug failures. This converts the cpu notifier to return encapsulate errno value for the lockup_detector as well. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: peterz@infradead.org Cc: gorcunov@gmail.com Cc: fweisbec@gmail.com LKML-Reference: <1283310009-22168-3-git-send-email-dzickus@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 31 Aug, 2010 1 commit
-
-
Steven Rostedt authored
When CONFIG_IRQSOFF_TRACER is set and CONFIG_PROVE_LOCKING is not, we get the following error: $ make oldconfig scripts/kconfig/conf --oldconfig arch/x86/Kconfig warning: (IRQSOFF_TRACER && TRACING_SUPPORT && FTRACE && TRACE_IRQFLAGS_SUPPORT && !ARCH_USES_GETTIMEOFFSET) selects TRACE_IRQFLAGS which has unmet direct dependencies (DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && PROVE_LOCKING) warning: (IRQSOFF_TRACER && TRACING_SUPPORT && FTRACE && TRACE_IRQFLAGS_SUPPORT && !ARCH_USES_GETTIMEOFFSET) selects TRACE_IRQFLAGS which has unmet direct dependencies (DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && PROVE_LOCKING) This is because IRQSOFF_TRACER selects TRACE_IRQFLAGS but TRACE_IRQFLAGS has PROVE_LOCKING as a dependency. This code is incorrect, and this patch changes the TRACE_IRQFLAGS to be just a simple bool that does not depend or select anything. Instead both IRQSOFF_TRACER and PROVE_LOCKING select it. Reported-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
-
- 30 Aug, 2010 1 commit
-
-
Ingo Molnar authored
Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/core
-
- 27 Aug, 2010 1 commit
-
-
Frederic Weisbecker authored
Conflicts: tools/perf/util/callchain.h Merge reason: Fix a non-trivial conflict with latest fixes
-
- 26 Aug, 2010 1 commit
-
-
Frederic Weisbecker authored
Each histogram entry has a callchain root that stores the callchain samples. However we forgot to initialize the tracking of children hits of these roots, which then got random values on their creation. The root children hits is multiplied by the minimum percentage of hits provided by the user, and the result becomes the minimum hits expected from children branches. If the random value due to the uninitialization is big enough, then this minimum number of hits can be huge and eventually filter every children branches. The end result was invisible callchains. All we need to fix this is to initialize the children hits of the root. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: 2.6.32.x-2.6.35.y <stable@kernel.org>
-
- 25 Aug, 2010 10 commits
-
-
Tom Zanussi authored
External shared libraries should never be appended to the LDFLAGS as this messes the linking order. As EXTLIBS collects those libraries, it seems that perl and python libraries should also be appended to EXTLIBS. Also fix the broken linking order. This is a refresh of a patch by Ozan Çağlayan and improved by both Tom Zanussi and Kirill A. Shutemov. Cc: Ozan Çağlayan <ozan@pardus.org.tr> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <1282627430.28324.8.camel@tropicana> Signed-off-by: Tom Zanussi <tzanussi@gmail.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Srikar Dronamraju authored
Given a dso, list the symbols in ascending name order. Needed for listing available symbols from perf probe. Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com> Cc: Mark Wielaard <mjw@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Naren A Devaiah <naren.devaiah@in.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <20100825134329.5447.92261.sendpatchset@localhost6.localdomain6> Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
When looking at a callchains enabled perf data file one can find it tiresome to start with all callchains collapsed and then to have to go one by one expanding them. So associate 'E' with "Expand all callchains" and 'C' with "Collapse all callchains". This way now one can have the top level view and then switch to/from having all callchains expanded. More work is needed to allow expanding just from one branch down to its leaves. Reported-by: Christoph Hellwig <hch@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Not everytime we show the callchains, removing duplicated initialization of this field. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Its way too stupid to use rb_first() for just caching if there are children, use the cheaper RB_EMPTY_ROOT() instead. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
It wasn't setting the ms.has_children for the hist_entry itself, just for the callchain Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Lin Ming authored
If on Pentium4 CPUs the FORCE_OVF flag is set then an NMI happens on every event, which can generate a flood of NMIs. Clear it. Reported-by: Vince Weaver <vweaver1@eecs.utk.edu> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Merge reason: pick up perf fixes Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Lin Ming authored
This fixes the following build warning introduced by the callchain rework: arch/x86/kernel/cpu/perf_event.c:1574: warning: ‘perf_callchain_entry_nmi’ defined but not used Signed-off-by: Lin Ming <ming.m.lin@intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1282718949.16443.75.camel@minggr.sh.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
Anton Blanchard authored
save_stack_trace() stores the instruction pointer, not the function descriptor. On ppc64 the trace stack code currently dereferences the instruction pointer and shows 8 bytes of instructions in our backtraces: # cat /sys/kernel/debug/tracing/stack_trace Depth Size Location (26 entries) ----- ---- -------- 0) 5424 112 0x6000000048000004 1) 5312 160 0x60000000ebad01b0 2) 5152 160 0x2c23000041c20030 3) 4992 240 0x600000007c781b79 4) 4752 160 0xe84100284800000c 5) 4592 192 0x600000002fa30000 6) 4400 256 0x7f1800347b7407e0 7) 4144 208 0xe89f0108f87f0070 8) 3936 272 0xe84100282fa30000 Since we aren't dealing with function descriptors, use %pS instead of %pF to fix it: # cat /sys/kernel/debug/tracing/stack_trace Depth Size Location (26 entries) ----- ---- -------- 0) 5424 112 ftrace_call+0x4/0x8 1) 5312 160 .current_io_context+0x28/0x74 2) 5152 160 .get_io_context+0x48/0xa0 3) 4992 240 .cfq_set_request+0x94/0x4c4 4) 4752 160 .elv_set_request+0x60/0x84 5) 4592 192 .get_request+0x2d4/0x468 6) 4400 256 .get_request_wait+0x7c/0x258 7) 4144 208 .__make_request+0x49c/0x610 8) 3936 272 .generic_make_request+0x390/0x434 Signed-off-by: Anton Blanchard <anton@samba.org> Cc: rostedt@goodmis.org Cc: fweisbec@gmail.com LKML-Reference: <20100825013238.GE28360@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 24 Aug, 2010 23 commits
-
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: watchdog: Don't throttle the watchdog tracing: Fix timer tracing
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mutex: Improve the scalability of optimistic spinning
-
Luck, Tony authored
pa-risc and ia64 have stacks that grow upwards. Check that they do not run into other mappings. By making VM_GROWSUP 0x0 on architectures that do not ever use it, we can avoid some unpleasant #ifdefs in check_stack_guard_page(). Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jesse Barnes authored
When converting this to the new wait_for macro I inverted the wait condition, which causes all sorts of problems. So correct it to fix several failures caused by the bad wait (flickering, bad output detection, tearing, etc.). Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix tlb flushing vs. concurrent /proc accesses [S390] s390: fix build error (sys_execve)
-
Jianwei Yang authored
We should pass the data to the data register. Signed-off-by: Jianwei Yang <jianwei.yang@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ossama Othman authored
It looks like there is an off-by-one error in one of your changes to drivers/staging/rar_register/rar_register.c: Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ingo Molnar authored
This build bug triggers: drivers/built-in.o: In function `mantis_exit': (.text+0x377413): undefined reference to `ir_input_unregister' drivers/built-in.o: In function `mantis_input_init': (.text+0x3774ff): undefined reference to `__ir_input_register' If MANTIS_CORE is enabled but IR_CORE is not. Add the correct dependency. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Get rid of indirect p1275 PROM call buffer. sparc64: Fill a missing delay slot. sparc64: Make lock backoff really a NOP on UP builds. sparc64: simple microoptimizations for atomic functions sparc64: Make rwsems 64-bit. sparc64: Really fix atomic64_t interface types.
-
Martin Schwidefsky authored
The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Fix config dependency problem with MPIC_U3_HT_IRQS via-pmu: Add compat_pmu_ioctl powerpc: Wire up fanotify_init, fanotify_mark, prlimit64 syscalls powerpc/pci: Fix checking for child bridges in PCI code. powerpc: Fix typo in uImage target powerpc: Initialise paca->kstack before early_setup_secondary powerpc: Fix bogus it_blocksize in VIO iommu code powerpc: Inline ppc64_runlatch_off powerpc: Correct smt_enabled=X boot option for > 2 threads per core powerpc: Silence xics_migrate_irqs_away() during cpu offline powerpc: Silence __cpu_up() under normal operation powerpc: Re-enable preemption before cpu_die() powerpc/pci: Drop unnecessary null test powerpc/powermac: Drop unnecessary null test powerpc/powermac: Drop unnecessary of_node_put powerpc/kdump: Stop all other CPUs before running crash handlers powerpc/mm: Fix vsid_scrample typo powerpc: Use is_32bit_task() helper to test 32 bit binary powerpc: Export memstart_addr and kernstart_addr on ppc64 powerpc: Make rwsem use "long" type ...
-
Sebastian Ott authored
fix this build error: arch/s390/kernel/process.c:272: error: conflicting types for 'sys_execve' arch/s390/kernel/entry.h:45: error: previous declaration of 'sys_execve' was here make[1]: *** [arch/s390/kernel/process.o] Error 1 make: *** [arch/s390/kernel] Error 2 introduced by d7627467Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: sep: remove driver Staging: batman-adv: Don't write in not allocated packet_buff Staging: batman-adv: Don't use net_dev after dev_put Staging: batman-adv: Create batman_if only on register event Staging: batman-adv: fix own mac address detection Staging: batman-adv: always reply batman icmp packets with primary mac Staging: batman-adv: fix batman icmp originating from secondary interface Staging: batman-adv: unify orig_hash_lock spinlock handling to avoid deadlocks Staging: batman-adv: Fix merge of linus tree Staging: spectra: removes unused functions Staging: spectra: initializa lblk variable Staging: spectra: removes unused variable Staging: spectra: remove duplicate GLOB_VERSION definition Staging: spectra: don't use locked_ioctl, fix build Staging: use new REQ_FLUSH flag, fix build breakage Staging: spectra: removes q->prepare_flush_fn, fix build breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: 68328serial: check return value of copy_*_user() instead of access_ok() synclink: add mutex_unlock() on error path rocket: add a mutex_unlock() ip2: return -EFAULT on copy_to_user errors ip2: remove unneeded NULL check serial: print early console device address in hex
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: kobject_uevent: fix typo in comments firmware_class: fix typo in error path kobject: Break the kobject namespace defs into their own header
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits) ARM: imx: fix build failure concerning otg/ulpi USB: ftdi_sio: add product ID for Lenz LI-USB USB: adutux: fix misuse of return value of copy_to_user() USB: iowarrior: fix misuse of return value of copy_to_user() USB: xHCI: update ring dequeue pointer when process missed tds USB: xhci: Remove buggy assignment in next_trb() USB: ftdi_sio: Add ID for Ionics PlugComputer USB: serial: io_ti.c: don't return 0 if writing the download record failed USB: otg: twl4030: fix wrong assumption of starting state USB: gadget: Return -ENOMEM on memory allocation failure USB: gadget: fix composite kernel-doc warnings USB: ssu100: set tty_flags in ssu100_process_packet USB: ssu100: add disconnect function for ssu100 USB: serial: export symbol usb_serial_generic_disconnect USB: ssu100: rework logic for TIOCMIWAIT USB: ssu100: add register parameter to ssu100_setregister USB: ssu100: remove duplicate #defines in ssu100 USB: ssu100: refine process_packet in ssu100 USB: ssu100: add locking for port private data in ssu100 USB: r8a66597-udc: return -ENOMEM if kzalloc() fails ...
-
David S. Miller authored
This is based upon a report by Meelis Roos showing that it's possible that we'll try to fetch a property that is 32K in size with some devices. With the current fixed 3K buffer we use for moving data in and out of the firmware during PROM calls, that simply won't work. In fact, it will scramble random kernel data during bootup. The reasoning behind the temporary buffer is entirely historical. It used to be the case that we had problems referencing dynamic kernel memory (including the stack) early in the boot process before we explicitly told the firwmare to switch us over to the kernel trap table. So what we did was always give the firmware buffers that were locked into the main kernel image. But we no longer have problems like that, so get rid of all of this indirect bounce buffering. Besides fixing Meelis's bug, this also makes the kernel data about 3K smaller. It was also discovered during these conversions that the implementation of prom_retain() was completely wrong, so that was fixed here as well. Currently that interface is not in use. Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andreas Schwab authored
MPIC_U3_HT_IRQS is selected both by PPC_PMAC64 and PPC_MAPLE, but depends on PPC_MAPLE, so a PPC_PMAC64-only config gets this warning: warning: (PPC_PMAC64 && PPC_PMAC && POWER4 || PPC_MAPLE && PPC64 && PPC_BOOK3S) selects MPIC_U3_HT_IRQS which has unmet direct dependencies (PPC_MAPLE) Fix that by removing the dependency on PPC_MAPLE. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andreas Schwab authored
The ioctls are actually compatible, but due to historical mistake the numbers differ between 32bit and 64bit. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Andreas Schwab authored
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Grant Likely authored
pci_device_to_OF_node() can return null, and list_for_each_entry will never enter the loop when dev is NULL, so it looks like this test is a typo. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anatolij Gustschin authored
Commit e32e78c5 (powerpc: fix build with make 3.82) introduced a typo in uImage target and broke building uImage: make: *** No rule to make target `uImage'. Stop. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: stable <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Matt Evans authored
As early setup calls down to slb_initialize(), we must have kstack initialised before checking "should we add a bolted SLB entry for our kstack?" Failing to do so means stack access requires an SLB miss exception to refill an entry dynamically, if the stack isn't accessible via SLB(0) (kernel text & static data). It's not always allowable to take such a miss, and intermittent crashes will result. Primary CPUs don't have this issue; an SLB entry is not bolted for their stack anyway (as that lives within SLB(0)). This patch therefore only affects the init of secondaries. Signed-off-by: Matt Evans <matt@ozlabs.org> Cc: stable <stable@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-